Question about the SGP Oleophobic screen protector

I just ordered one of the SGP Ultra Oleophobic protectors and was curious about their longevity. I never used a screen protector on my 3g and never had a scratch, but after some of the horror stories I've heard, I decided to put one on my iP4. Anyway, I don't have much a frame of reference as to how long these things last. Should I expect to buy a set twice a year/every two months? What has been your experience?

Resolved. Went to Genius Bar this morning to discuss yellow-screen issue.
The Genius looked at my iPhone (which is yellow), looked at my girlfriend's iPhone (which is okay). Brought both iPhones to the back office, came back within minutes, and said "compared both to my iPhone yours (the yellow one) obviously looks more yellow. I will compare yours with other display iPhone models, and we will give you a replacement if we still find yours too yellow."
So he brings me and goes to in-store display iPhones, and compares. Mine looks obviously more tinted and looks worn out. He admits my screen is defective, and goes on to give me a new replacement phone. Screen looks awesome, and it works very good.
My original phone (yellow one) serial number started with 868. My gf's iPhone starts with 888. And my new replacement iPhone starts with 878.
Now this is just my thoughts, but if other yellow phones are also serial batch 868, I believe it is the defective batch. Maybe not, but it is possible.

Similar Messages

An inportant question about the iPhone 5 screen!

Not sure if i grasped the concept of the new iPhone 5 screen but from what i understood is that the glass screen n the sensors which detect the touch of ur fingers have been integrated into one screen allowing for a thinner phone, the only problem is that if ur glass were to crack, would that render the touch sensors useless? In the first 4 models if the screen cracked all was well and u only had to worry about the spot of cracked screen n the sensors n screen were fine...now im worried that the sensors and even the screen might b affected...thanx in advance
PS: Im also to understan that the new glass on the phone is superior in resistance than older models but in sure it doesnt make it invinsible

The previous phones were like this
----------- Glass
----------- Touch Sensors
----------- Pixels
Now, the iPhone 5 is that way
----------- Glass
----------- Pixels & Touch Sensors

Any comments about the Moshi AG screen protector?

Ordered my laptop with a glossy screen. Then found a anti-glare screen protector by the same company that makes one for the keyboard. Has anyone any comments regarding either the keyboard or screen units.

There have been many posts here praising the Moshi keyboard protector, several of them from me. It's thinner, less obstructive, better fitting, holds its shape better, and is less sticky to the touch than any of the silicone protectors, and it doesn't accumulate nearly as much dirt as they do. I switched to it after a month with a silicone protector and would never consider any other kind again. My keyboard looks exactly like it did the day I bought it after fourteen months of heavy use.
The glass covering your screen doesn't need any protection.

A question about the iPhone 4 screen

Hello there...
I bought my iPhone 4- 32 GB 2 months ago
My sister and brother bought there iPhone4 16GB one week ago and I had noticed that there screen is brighter and whiterthen my iphone...
Mine has like a yellow tint...
Is it normal?
If not, what should I do?
I added a print screen to demonstratethe problem
Thanks

you didnt answer my question
i asked if it is a known issue or the screen shouldnt look like this ..
any other answers ?

I see lots of people asking questions about the "white screen" app store update failure. I see no answers from Apple about this...What is the problem, and what is the solution?

I see lots of people asking questions about the "white screen" app store update failure. I see no answers from Apple about this...What is the problem, and what is the solution?

It's a problem that Apple is having with their App updating system. The best solution is to be patient, and wait for Apple to solve their systemic problem.

Should I keep the Otterbox Defender screen protector for iPhone 4S

Hello everyone! I have a quick question. I own a Otterbox Defender for my iPhone 4S and was thinking about removing the built in screen protector and replacing it with a Invisible Sheild from Zagg. Do you guys think I should do this? Also do you think a full body Zagg can protect my iPhone without a case? Let me know your thoughts and opinions! Thank you!

I originally used the Otterbox Defender with my 4S, and I immediately removed the built-in screen protector. I didn't like the way it felt when using the touch screen. Instead, I applied a screen protector directly to the screen. (I can't remember the brand since it's been almost two years.) I didn't care about dust protection. I just cared about impact protection.
After a few months, I ditched the Defender because it was too bulky. I've used an Incipio case since then and my phone still looks like new.

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Questions about the content of download meeting recording .zip file

I tried posting this on the resurrected Connect forum, but my Adobe ID wasn't recognized there....
Concerning the files that are included in the .zip file of the meeting recording that can be downloaded:
1) Is there any documentation describing the files and their contents (i.e. what each file represents, what each XML element and attribute in those files represent)
2) Are there any files that capture mouse movement on a shared desktop?
Thank you!

Hi Sean,
Regarding your first post:
Thanks Jorma! I don't have access to an FMS build at the moment but I'm quite certain it's there. As for contacting Jaydeep, I am 90% sure he authorized us to broadcast his email on here if folks had questions about the tool, but, in the case that I'm wrong and he didn't - I'm going to double-check first.
Regarding your most recent post..
"To be clear, the most critical goal I'm trying to accomplish is to create an automated process that will download the recording meeting at its highest quality in a consistent and reliable manner".
I personally believe this is possible; unfortunately, I haven't seen it done yet. If your recording contains:
- audio
- a camera feed
- screensharing
Then I think you might be able to get this going. If it contains shared content, like a shared PPT, this gets trickier.
"To do this, of course, I have to reproduce some of the functionality that Connect provides, starting and combining video and audio streams according to the instructions in the control files."
Exactly right. If your recording didn't contain shared content, then all you've got on your hands are a bunch of audio/video files that you could edit together as you wanted with your favourite video editing tool. If it contains shared content, here's (at a high level) what's happening.
For shared PPTs or FTContent files:
First (for version 9 recordings only), Connect reads the information on the Shared Content's location and SCO within mainstream and indexstream and validates it before loading it. I don't recall this happening to the same extent with version 8 or earlier, but maybe it was. Now, if the content is validated (ie. Connect can find it) the share pod will display as black, if it doesn't, you get an empty pod with an message like "No content is being shared" or something like that.
Connect then looks at the actual FTContent file, and loads the content that is to be shared using the file path and sco ID listed in here. It's important to note that the SCO ID and file path in here will likely not be the same as the original file you uploaded to your room, it's a new SCO id (I believe SCOs of this type are called referenced scos) and new path.
Now...if I was going to build some sort of player which would play all these files in one screen to make a recording...I might not want to use Connect's code here. If you know the file path to the shared content (from FTContent), you could easily view it with the content URL (conveniently also in FtContent). I'm not a coder, but I'm envisioning something like Presenter's GUI where you've got the presentation's content in the main area, and a video file (if there is one) playing back on the side.
Anyways, food for thought if you want to try to go about this. Connect recordings are incredibly complex and they come with a big learning curve, but if you can make sense of them the knowledge is quite valuable.

Short question about the nano controls

Hi. I'm probably going to buy a 4Gb nano today, but first I'd like to ask a short question about the << >> buttons on the click wheel.
I read in a forum that the << & >> buttons are actually 'skip' buttons (only used to play the previous or next song respectively), and that it's impossible to rewind or fast-forward within the track you're listening to. This is extremely important for me as I have several 2-3 hours mp3, and I need to be able to access different parts of the file quickly (eg. not having to actually wait 1 hour to listen to my favorite part). I found this to be an important feature, and I can't believe Apple hasn't thought about it.
Anyway, I've never used an iPod, that's why this question may sound plain stupid.
Thanks for you replies!

The iPod fast charges to about 80% and then trickle charges the rest of the way to prevent damaging the battery/iPod. A full charge takes more than an hour or two though the battery indicator will show full. The best way to tell if a full charge has occurred is to unmount the iPod from the computer but keep it connected. The screen will show an animation of a battery. When the animation stops the battery is fully charged.
Also, as your battery discharges the indicator will eventually show red indicating the battery is about to run out...in an hour or two. After you've owned your iPod for a couple months you'll figure out how much time you have left when the indicator turns red - it depends on a number of factors including play volume, equalizer use, etc. In real world use I'm getting over 11 hours.
The headphones are...average. If they didn't hurt my ears I'd find them acceptable for my pop music but not so acceptable for acoustic and symphonic nor music with booming bass - because they don't boom the bass.
I encode the majority of my music at 256 AAC and I've noticed no distortion caused by the EQ. This, plus your complaint about the earphones, leads me to think perhaps you got a bum set of phones. Borrow a pair from someone else and see what happens.

I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty?

I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty? I want to know if the 3 year extended warranty covers what damage. Like water damage, accidental damage, lost or stolen macbook, manufactory defects, or any other kind of damage, maybe be even cosmetic damage. Can anyone help me?

If you are talking about features of the MBP itself, as long as you are not looking at the Retina models, then the memory you can upgrade yourself for a lot less than Apple charges, and that does not affect the warranty as Apple considers memory a user permitted upgrade. Great sources are Crucial and OWC, both are Mac specialists and have on-line videos on how to do the install.
If the 15" is what you are looking at, a good upgrade is the 7200 rpm hard drive, gives a little better performance over the standard 5400 rpm drive.
The Hi Res screen is good if you do a lot of graphics work.
Comparing the 13" amd 15" you will notice the 15" has a second, discrete graphic processor...helps when you get into heavy duty videos, games, graphics...but keep in mind that kicking in the second processor uses a lot of power and will run the battery down faster.
If you are looking at the Retina models, then keep in mind there are no post-purchase upgrade options...you have to buy with everything you want at the start.
Just some thoughts.

4 questions about the the top boxes - SD box and Home media DVR

Hello. I am going to be getting Fios soon and I have some questions about the boxes. I will be getting the Home Media DVR and 4 SD boxes.
1) Do these boxes have timers on them to set so the box can turn off at a certain time?
2) Do these boxes have parental control and if so is it good enough to block things that I do not want my child to see?
3) How many people can access the home media dvr at the same time to watch already recorded programs
4) If the Home Media DVR is in the family room can a record be started from the bedroom over the SD set top box (even an hd show)?
Thanks for any help.

I have been using two Standard Set Top Boxes for about a year. I have Parental Controls on and all channels locked. When I want to watch a channel, I tune to that channel, note the LOCKED message, which tells me to press the OK button to enter ther Parental Controls PIN and unlock the channel for viewing.
This has worked flawlessliy for the last year -- ON THE Standard STB's.
I just ordered the Home Media DVR STB to replace one of my Standardt STB..
On the Home Media DVR:
I can set the Parentals Control PIN and lock the channels, in the exact same way I did o nthe Standard STB's. However, when tuen to ANY channel, I still ge the LOCKED message and instructions to press OK to unlock the channel -- BUT no matter how I press the OK button, the Enter your Parental Conlrols PIN dialog box willl NOT open. Nothing happens -- you CAN NOT view any channel.
Again, it is the EXACT setup as for the Standard STB, but the OK button will NOT unlock any of the channels.
If you unlock all channels and LOCK the Ratings, the same problem recurs: OK buitton will never open the "enter your PIN" dialog box.
I have received two replacement boxes and have spent hours on the phone with some very capable and helpful Techs -- no luck.
Has anyone else had the same problem? Here's how to test your Home Media DVR:
1. Menu-Settings-Parental Controls.
2. You will be prompted to CREATE youre Parental Controls PIN
3. Enter you PIN twice.
4. Use the > button to scroll to Enable On/Off and set it on.
5. scroll down to Control Channels
6. Press > button to See Locked Channels
7. Scroll down to Add/Remove Channels
8. Scroll right to choose LOCK ALL
9. Press OK and then scroll to YES to lock all channels
10. Press EXIT to get out of settings.
11. All channels are now locked.
12. Go to any channel
13. A black screen will appear with a lock silhouette with the word LOCKED below, followed by instructions to Press OK to enter PIN and unlock this channel. (plus how to change locks...).
14.Press the OK button and, if it is working, you will see a dialog box at the bottom of the screen that is titled: UNLOCK, with the channel listed and the instructions to "Enter your PIN using your numeric pad on remote to naje this channel availabe for all users." THere's a PIN box, which shows asterisks for each number entered, with "Press Exit to Cancel" below.
15. On the Standard STB, it works exactly as described in steps 1 thru 14. On the Media Center DVR, it works up to step `13, but in 14, no matter how you press the OK button, the UNLOCK dialog box never pops us. The Remote STB light flashes on the remove and the REMOTE yellow light flashes on the DVR, but nothng happens.
If you have a Home Media DVR, can you please try this and see if it works?
Thanks,
John

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

Questions about the Apple Developer Enterprise Program

Hi there,
i got some questions about the Apple Developer Enterprise Program:
- is there a way a company can create their own "AppStore" with only the APPs the employees should use?
- when I developed the enterprise app are the install files on a apple hosted server or do i need my own infrastructure to distribute my app?
Thanks in advance for answers!

Google: MDM

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Two questions about the new iWeb

Hi
I've got two questions about the new iWeb.
1. Is it possible to blog online now? Meaning adding a new blog entry without having to be on your own Mac? This is a feature I've been waiting for since iWeb first was released.
2. Is it possible to choose the format of images? Earlier editions had the option to "optimize" images but that meant it changed it into .png meaning the site got a lot heavier than if .jpg was used. And since I have relatives who still only have an isdn connection I need to be able to have the website as light as possible.
thanks

Ah well... thanks for the quick answer
Message was edited by: Guðlogi

Question about the SGP Oleophobic screen protector

Similar Messages

Maybe you are looking for