Question about the TORCH ?? (I know Verizon doesn't have it yet)

I am really really wanting to get the Torch and have been holding out on using my 2-yr upgrade because I wanted the Torch. However, I wondered about one feature on the Torch, which might change my decision to hold-out for that model to come to Verizon.
The Torch seems to be a blend of the Storm and the Bold, but I wondered about the touch-screen feature on the Torch. Do you have to press the screen to "click" the screen just like you have to do on the Storms? If that is the case, then I DON'T want the phone and will stop holding-out for it.
I liked the idea of the Torch to gradually transition me to a touch-screen feature phone, but without giving up my beloved physical keyboard AND the Blackberry system, to which I've been pretty loyal. I'm not ready to give up the Blackberry and move to Droids and other similar phones, which is why I was so excited about the Torch.
BUT....... if the Torch's touch-screen feature works exactly like the Storm (press and click the screen itself), then I DON'T want it. And will maybe check out the Droid 2 because of the slider keyboard.
Thanks in advance for any in-put.

Hi and Welcome to the Community!
The technical term for what you refer to is "SurePress". Sadly, it's been abandoned and only existed on the Storm series BBs. The Torch series are all touch sensitive with no physical movement or feedback. I was on a Storm, and then a Storm2, and now a 9860...I actually am quite surprised how quickly I shifted from "needing" that tactile feedback.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I am concerned about the health of my current computer but have not yet made the commitment to a new one, but: 1) How can I transfer my iTunes account to a new computer when I get one... and 2) What can I do if my current computer suddenly implodes and I

I am a bit of a computer/Internet/iTunes dummy....
I am concerned about the health of my current computer but have not yet made the commitment to a new one, but:
1) How can I transfer my iTunes account to a new computer when I get one...
and
2) What can I do if my current computer suddenly implodes and I have not yet 'copied/'saved'/otherwise protected my account, as is? -- I have already had my computer crash once and had one of your people help me restore all of the paid for songs (none of the uploaded from my own collection of CD songs, of course, so I had to spend a long time rebuilding that) -- and I believe I was told you could only help me recover that material one or two times altogether, no?
WithOUT purchasing a Mach or iCloud (I actually think I have one of the later, but rarely have checked it) account, is there anything I can do to responsibly protect my account?
Thanks for any time taken on this!!!

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

A few questions about the Torch 9800

a friend recently gave me her old torch and I wiped it created a new BBID and deleted BBM reinstalled it and it still doesnt work, i dont have a data plan but bbm should work on my home network. another thing when adding a email, how do you find the ``activation password`` is it my email password... any help would be appreciated
Solved!
Go to Solution.

Hi and Welcome to the Community!
jamesgover wrote:
i dont have a data plan but bbm should work on my home network.
No, actually, it should not. On legacy devices BBM is a proprietary service, requiring subscription to an adequate data plan from your carrier, even if you only want to use it via WiFi.
jamesgover wrote:
another thing when adding a email, how do you find the ``activation password`` is it my email password
Likewise, email via the native Messages app is a proprietary service, requiring subscription to an adequate data plan.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Questions about the Galaxy Tab on Verizon

Hello
Samsung is saying that the Galaxy Tab is comming to Verizonwireless soon. Rumors are sometime in November. I'm really excited about this product but I'm a little in the dark on some of the features and capabilties Verizonwireless will have for the Tablet when it is introduced.
Q1. Will I be able to use my Verizon cell phone number with the tablet to make and receive phone calls? If Verizon configures it for cell phone serivce, this device will be an iPad killer. Rumor has it that it is being offered in the UK with cell phoine service.
Q2. Will it be introduced on Verizons 4G network? May as well start off on the right foot. Again, this will be hugely popular with Verizon customers if it is.
Q3. When? My contract is up in December and I am looking for a device like this. When does Verizon plan to release the Galaxy Tab?
Thanks
JayT

We don't have any information on this device at this time. Keep in mind you can sign up to receive exclusive online offers, promotions and the latest information on products and services. Click here https://email.vzwshop.com/servlet/formlink/f?NFOQU&SOURCEID=WEB_DGF_VZW_SUPPORTNAV

Questions about the content of download meeting recording .zip file

I tried posting this on the resurrected Connect forum, but my Adobe ID wasn't recognized there....
Concerning the files that are included in the .zip file of the meeting recording that can be downloaded:
1) Is there any documentation describing the files and their contents (i.e. what each file represents, what each XML element and attribute in those files represent)
2) Are there any files that capture mouse movement on a shared desktop?
Thank you!

Hi Sean,
Regarding your first post:
Thanks Jorma! I don't have access to an FMS build at the moment but I'm quite certain it's there. As for contacting Jaydeep, I am 90% sure he authorized us to broadcast his email on here if folks had questions about the tool, but, in the case that I'm wrong and he didn't - I'm going to double-check first.
Regarding your most recent post..
"To be clear, the most critical goal I'm trying to accomplish is to create an automated process that will download the recording meeting at its highest quality in a consistent and reliable manner".
I personally believe this is possible; unfortunately, I haven't seen it done yet. If your recording contains:
- audio
- a camera feed
- screensharing
Then I think you might be able to get this going. If it contains shared content, like a shared PPT, this gets trickier.
"To do this, of course, I have to reproduce some of the functionality that Connect provides, starting and combining video and audio streams according to the instructions in the control files."
Exactly right. If your recording didn't contain shared content, then all you've got on your hands are a bunch of audio/video files that you could edit together as you wanted with your favourite video editing tool. If it contains shared content, here's (at a high level) what's happening.
For shared PPTs or FTContent files:
First (for version 9 recordings only), Connect reads the information on the Shared Content's location and SCO within mainstream and indexstream and validates it before loading it. I don't recall this happening to the same extent with version 8 or earlier, but maybe it was. Now, if the content is validated (ie. Connect can find it) the share pod will display as black, if it doesn't, you get an empty pod with an message like "No content is being shared" or something like that.
Connect then looks at the actual FTContent file, and loads the content that is to be shared using the file path and sco ID listed in here. It's important to note that the SCO ID and file path in here will likely not be the same as the original file you uploaded to your room, it's a new SCO id (I believe SCOs of this type are called referenced scos) and new path.
Now...if I was going to build some sort of player which would play all these files in one screen to make a recording...I might not want to use Connect's code here. If you know the file path to the shared content (from FTContent), you could easily view it with the content URL (conveniently also in FtContent). I'm not a coder, but I'm envisioning something like Presenter's GUI where you've got the presentation's content in the main area, and a video file (if there is one) playing back on the side.
Anyways, food for thought if you want to try to go about this. Connect recordings are incredibly complex and they come with a big learning curve, but if you can make sense of them the knowledge is quite valuable.

Question about the animated Pen tool

Hi,
ive a question about the animated pen-tool.
i draw a word, but my hand isnt very calm, so the result is what you see on the screenshot.
Is there a possibility to reduce the points on the animated pen tool like in illustrator?
i know in illustrator its possible, but i didnt found anything in after effects to do it.
thanks for your help

If you are using the Paint tools those options don't exist in After Effects. The only work around is to set a keyframe for the brush path, copy the keyframe, then go to Illustrator and in a blank document the same size as your layer paste. Once in Illustrator you can simplify the path, select it, copy it, then go back to After Effects and select the same keyframe then paste. If you get a mask instead of a new path delete the mask path, make sure you have only the original brush path keyframe selected, then go to Edit>Paste from the menu.
It doesn't look like you're drawing a mask path. That might be a better way to go.

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laci

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

[Zen Micro]Questions about the Firmw

Hello,
I have some questions about the firmware of the Zen Micro
. Can I use the Zen Micro without any Software (MediaSource?) on my PC (winXP) when im using the Firmware Creative Zen Micro *PlaysForSure/MTP Firmware 2.00.2 ? This means that i copy my Music only by drag&drop from the Explorer after my Computer has detected the Zen Micro as a Removable Disk!
2. I know that the Zen Micro has two parts with the Normal Firmware. The "Removable Disk" Part and the "Playable" Part which can only used by the Software! But what happens if my . question is right. How can i seperate this two parts?
Thanks for answers

I don't have the 2.x firmware, but I think I'm correct in saying this :
with the 2.x firmware, your Micro becomes an MTP compatible device, which can be recognized on PCs having an MTP compatible OS (operating system). For the moment, the only OS that fits the bill to my knowledge, is Win XP with Windows Media Player 0. In this combination of MTP device + MTP OS, you don't need to install other drivers, and you can do drag and drop
BUT ! The 2.x firmware doesn't make your device a "removable disc" in the traditional sense of the word. It doesn't become a file system, like a USB memory stick.
I hope I was clear enough to see the difference :-)Message Edited by fred_be9300 on 04-03-2005 02:52 AM

Re: Question about the Satellite P300-18Z

Hello everyone,
I have a couple of questions about the Satellite P300-18Z.
What "video out" does this laptop have? (DVI, s-video or d-sub)
Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
What is the warranty on this laptop?

Hello
According the notebook specification Satellite P300-18Z has follow interfaces:
DVI - No DVI port available
HDMI - HDMI-out (HDMI out port available)
Headphone Jack - External Headphone Jack (Stereo) available
.link - iLink (Firewire) port available
Line in Jack - No Line in Jack port available
Line out Jack - No Line Out Jack available
Microphone Jack - External Micrphone Jack
TV-out - port available (S-Video port)
VGA - VGA (External monitor port RGB port)
Also you can connect it to your LCD TV using HDMI cable.
Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

Question about the DB adapter

Question about the DB adapter
ns2006.0.7
Question:
It seems that we can only have 1 db adapter, but in the adapter defiition we have to specify the database. If I want to communicate to several different databases on different platforms, Oracle / SQL I need to install a DB adapter for each database connection.
I can't figure out how to add a second DB adapter, does anyone know how?
Thank you
Daniel
Safeway Inc.

Hi
We're new at developing our own agents etc. We've leveraged the supplied DB agent and written the relevant adapter, however we're struggling with the transformation.
Could I be cheeky and ask if anyone would be willing to share a transformation they have written for the DB adapter? Unfortunately no-one in our team has had past XML experience, so we're trying to backwards engineer from examples.
Thanks, Meghan

Question about the programming of a legend

Hello everybody,
I have a question about the programming of a waveform's legend. I
already asked here in this forum about the legend programming (03)
months ago.
I went satisfied but I ve just noticed that this code
(See Code old_legend_test.llb with main.vi as main function) operates a
little different from my expectances.
Therefore I have a new question and I want to know if it
is possible by labview programming to plot and show, on a waveform
chart, a signal with activ plot superior to zero (0) without to be
obliged to plot and show a signal with activ plot equal to zero (0) or
inferior to the desired activ plot.
I give you an example
of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
and each signal corresponds respectively to a channel (Chan1, Chan2,
Chan3, Chan4). I want to control the legend (activ plot, plot name and
plot color) programmatically. Is it possible with labview to plot signal
1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
without to active the signal with the corresponding activ plot zero
(0)?
Let see the labview attached data
(new_legend_test.llb with main.vi as main function). When I try to
control the input selected values again I get them back but I don't
understand why they have no effect on the legend of my waveform chart.
Could somebody explain me what I m doing wrong or show me how to get a
correct legend with desired plots? Thank by advance for your assistance.
N.B.
The
both attached data are saved with labview 2009.
Sincerly,PrinceJack
Attachments:
old_legend_test.llb ‏65 KB
new_legend_test.llb ‏65 KB

Hi
princejack,
Thanks for
posting on National Instruments forum.
The behavior
you have is completely normal. You can control the number of row displayed in
the legend and this rows are linked to the data you send to your graph. Thus,
if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
which data you want to display in your graph using the property node (Active
plot and visible). But for the legend as you send 3 plots there is an array of
the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
this array but you cannot control the order in this array! So, to be able to
change this array you have to only send data you need to you graph. I'm not
sure my explanations are clear so I have implemented a simple example doing
that.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/
Attachments:
GraphLegend.vi ‏85 KB

I want to question about the official service at the service center of Sony.

I want to question about the official service at the service center of Sony.
long since I like the models and items sony. from start playstation, cameras, camcorders up, I've ever had. and a new camera that I bought two years ie compact cameras Sony Cybershot DSC H200. as of a month ago, a camera was having problems in lenses that would not close. and setting the automatic mode to move by itself. I came to the Sony Service Center in Makassar, precisely on Jl. Shop Pengayomann A5 / 05 (0411) 442340.
operator initially said only two weeks to work on my camera. but this week has been more dau even want to go in a month tomorrow, dated July 9, no news from the service center. and I kept the call to the office service. as well as assorted reasons. there are no spare parts or technical constraints, and the last one I call to his office, he said the factory spare part is damaged. imported directly from Singapore. I think, ko new spare part it can be damaged before using that? how the quality of this Sony spare part? ugly? not good? why?
I was disappointed with this situation, where soon it will Eid, want to return home as well to Java. but the camera has not been settled workmanship?
nah, roughly what is the solution of the Sony plagued with this problem? please help, because he did not know to whom to complain. operator had just said: it's up to the father alone.
once again I asked for his help. solution. if you can before Eid arrived.
Thank you,
AD. Rusmianto

Hi awwee107,
Welcome to the Sony Community!
We have forwarded your query to the relevant team for their further assistance and someone from local CC will contact you.
Thanks!

3 questions about the evalution license ?

Hi - I have some questions about the Weblogic Server Eval license.
Before I start let me just say I'm not trying to rip BEA off, I just
want to know what's possible.
1. Firstly what happens after the 30 days does the server just not
work or only work in a restricted form ? If restricted, how so ?
2. I read that the eval edition will only access 3 unique IP
addresses. I intend to have WL running on a RedHat linux box whilst
the pages are served by IIS on a W2K box (both machines are on our
internal LAN). Am I going to be able to do this with the eval license
? I'm not quite sure what the 3 IP addresses refer to ...
3. Do I need anything super-strong in the way of a Linux box to run
this on ? I've got an old Pentium with 32Mb of RAM in it. I can't see
a "minimum spec" on the BEA site. Bear in mind it's not to do any
"real" work just to give the thing a run around the block ?
4. When the Eval license is dead what's the minimum amount a small s/w
house would pay for a licence to develop under (US (or anywhere)
prices will do I just want a ballpark).
Sorry that was 4 questions ;-). I'd appreciate any information you
have to share.
Thanks
Richard Shea.

1)The server won't start if the license expires.
2)The 3 unique IP'S refer to the number of clients that can access the
server. It means that WLS will server requests coming from 3 different
ip's at most. A request coming froma 4th client with a different ip will
be rejected.
3)I guess 32 MB's is relatively less The default scripts always use 64 MB
exclusively for the JVM . Having 32mb RAM means that a part of it will be
used by t he Operating System and other Applications. You might experience
OutOfmemory errors and slow performance
4)email [email protected] and they should be able to handle this
Yeshwant
Richard Shea wrote:
Hi - I have some questions about the Weblogic Server Eval license.
Before I start let me just say I'm not trying to rip BEA off, I just
want to know what's possible.
1. Firstly what happens after the 30 days does the server just not
work or only work in a restricted form ? If restricted, how so ?
2. I read that the eval edition will only access 3 unique IP
addresses. I intend to have WL running on a RedHat linux box whilst
the pages are served by IIS on a W2K box (both machines are on our
internal LAN). Am I going to be able to do this with the eval license
? I'm not quite sure what the 3 IP addresses refer to ...
3. Do I need anything super-strong in the way of a Linux box to run
this on ? I've got an old Pentium with 32Mb of RAM in it. I can't see
a "minimum spec" on the BEA site. Bear in mind it's not to do any
"real" work just to give the thing a run around the block ?
4. When the Eval license is dead what's the minimum amount a small s/w
house would pay for a licence to develop under (US (or anywhere)
prices will do I just want a ballpark).
Sorry that was 4 questions ;-). I'd appreciate any information you
have to share.
Thanks
Richard Shea.

Question about the new Yoga 10 HD+

Hi
A few questions about the new Yoga 10 HD+ which I hope you can answer.
I bought the old model last year. Loved the design and long battery time but a few major issues made me return it.
Somewhere I read that it can't read NTFS over USB so I presume that's the same with an NTFS formatted microSD card?
Can it read exFAT formatted microSD cards?
Anyone observed issues regarding audio over bluetooth?
(I know BT isn't exactly High End HiFi but the old Yoga 10 for some odd reason - most likely a driver issue which nobody cared to fix - sounded *much* worse with quite noticeably distortion while both my phone and a cheap noname tablet I have zero fidelity issues - no matter which of my bluetooth audio devices I tried aptX or not)
So to avoid buying this only to return it too I really would like to see if I can have my questions answered before buying it.
While I love the form factor and long running time the above issues are just two mayor dealbreakers to me. Bad audio quality = no joy listening to spotify, local MP3s etc. No NTFS or exFAT = no large movies.
My old noname android tablet really could use an upgrade so I'm really curious whether this can be it or I should look at the competition and sacrify form factor and battery runtime.
Thanks in advance.
EDIT:
If it's not supporting either NTFS or exFAT on the microSD have anyone tried ext3 and/or ext4?
I mean with Androids Linux roots it should be a nobrainer to support at least when it comes to royalties unlike NTFS or exFAT where there *might* be some issues with Microsoft.
Solved!
Go to Solution.

Thanks!
OK. Seems I should just stay clear of this and look elsewhere
Sony for sure I know support exFAT. I'm usure about Samsung. Odd it seems so hard to find out. File sizes of +4 GB should be taken for granted - it's not 199x anymore...
Oh well. Wonder whether to just go for one from the competition or perhaps just save the money and wait until 64 bit catches on. Rumors is that the next Nexus 8 will be 64 bit... (I really don't expect an answer on this)

Question about the MAKZN field in the RBKP table

Hello all.
I have a question about the MAKZN field. Does anyone know what field in MIRO is assigned to this field? We have an issue where a line item amount was not selected invoice was out of balance but the agent selected accept and post. And invoice posted. but I am interested in knowing where the amount if keyed in because when I go to the RBKP table I see an amount entered in the MAKZN (manually accept net difference amount)

Hi,
it seems as if the value was calculated internally:
program SAPLMR1M
dynpro 6000
PAI module fcode_6000
Include LMR1MI3W
*-------- buchen ------------------------------------------------------*
    WHEN fcobu OR fcomanak.
*--- identical code in PAI Module FCODE_6250 --------------------------*
      PERFORM ota_check USING vf_kred-xcpdk rbkpv-xcpdd
                        CHANGING rc.
      IF rc NE 0.
        CLEAR ok-code.
        EXIT.
      ENDIF.
      IF ok-code = fcomanak.
        PERFORM diff_akzeptieren.
        ok-code = fcobu.
      ENDIF.
where:
fcomanak          LIKE ok-code VALUE 'MANAK', " Manuell akzeptiert
*&      Form DIFF_AKZEPTIEREN
*       Differenz manuell akzeptieren
FORM diff_akzeptieren.
*       Manuell akzeptierter Betrag
    rbkpv-makzn = rbkpv-makzn + rbkpv-diffn.
    rbkpv-makzmw = rbkpv-makzmw + rbkpv-diffmw.
*       Differenzbeträge
    CLEAR: rbkpv-diffn, rbkpv-diffmw.
ENDFORM.                             " DIFF_AKZEPTIEREN
maybe it´s happenning when releasing manually the invoice in MRBR?
Best regards.

Question about the TORCH ?? (I know Verizon doesn't have it yet)

Similar Messages

Maybe you are looking for