Question about TravelSound 400.

Hi, I'm new here and i have a question about TravelSound 400 which i bought several days ago. Can someone tell me why the speakers activate the bas boost or sth like that while connected to the phone and while running on batteries, when i turn it too loud the start to distort bas tones. On the other hand, when i use them with the same phone and I'm playing back same track but now it's plugged to a power adapter the don't distort and i can turn it even louder. Can someone please explain it to me ? Thank you for furthr repliyng.
If there are any mistakes, sorry I'm not native english speaker.

That's faulty logic. Once the alkalines diminish to that point, there isn't much life left in them. You're far better off using the NiMH batteries. The added benefit is that the voltage level is almost flat during most of their usage cycle, so you should have fairly consistent performance. If you have concerns about having to frequently charge batteries or not having replacements around when you need them, consider some of the low self-discharge NiMH batteries that are often sold as "pre-charged" as those batteries will hold an 80% charge for 6 months to a year depending on the brand. If you need a brand suggestion, try the Sanyo Eneloops.
buddy101 wrote:
I use 4 Ni-MH batteries 650mAh each. All four have a voltage of 4.8 Volts, each 1.2V. So it should only distort when they are fresh after loading when the batteries have about 1,5V each. Maybe i should use them now for a while and maybe the performance will be better.

Similar Messages

  • A question about BC 400 training program

    Dear all,
    I have a question about SAP taining program for ABAP. My manager will soon register me for the training program BC 400, which seems to be the start point for those who don't know anything about ABAP. I was looking at the course description page and I saw that the course is provided as VLC (Virtual Class). As I understood is that the student connects from his workstation to the training center, so it is distant training program.
    I think it would be more interesting for me to be directly in the classroom with teacher face-to-face.
    Therefore, my qestion is the fact that a training program is VLC, does it mean that it is no more possible to attend directly in classes ? or is just for those who may not want for some reason attend directly to the class?
    Thanks in advance,
    Dariyoosh
    Moderator message: moved to S & C.
    Edited by: Thomas Zloch on Sep 6, 2010 2:33 PM

    This is forum for general abap problems.but to answer your question
    check this link from sap site
    http://www.sap.com/usa/services/education/tabbedcourse.epx?context=[[|bc400||1|063|us|]]|
    Thanks
    Bala Duvvuri

  • Newbie with question about the $400 Deposit for FIOS TV Service

    Okay, i was real happy when i found Fios is finally available in my area after years of waiting.  I call to order and theysay i need to post a 400 dollar deposit for fios tv.  I ask why and they say combination of poor credit and also the fact that the TV equipment as in the DVR boxes are very expensive and they just want security.  Its fullt refundable after 1 year.  However, to my suprise i was approved for FIOS Internet And Phone Service or Double freedom plan 20/5 internet and Freedom Phone plan both for $64 Dollars monthly 2 year guarantee.  Also get the 100 dollars cash back in for of the debit card.  My problem is that i dont need any verizon equipment for the Televisions as all my tvs in the home have tivo.  All i need is the cablecard decoder which i am sure are considerably less expensive than the Home media dvr or regular dvr.  Is there a way to get around this or am i stuck without fios tv until i put up the 400 dollars?  Is there a higher power i can appeal to?? 

    Thanks for the many previous replies.....  I solved my problem by calling verizon and using my wifes maiden name.  Now i will have all 3 fios services with no $400 dollar deposit. 

  • Few questions about recovery on P100-400

    Good evening all,
    I have a few questions about recovering my laptop...
    So, I was thinking if the only way to clean my entire disk is to use the Recovery DVD?
    I ask this because I think that the computer becomes too "heavy" with all the applications it came with. So I was wondering if I can format the Hard Drive instead of recover it.
    If I format the drive do I loose warranty? Is there any future problem related to genuine software?
    It's possible to install Windows XP Pro (and not the actual windows xp media center) with the original Operative system's product key?
    Thank you.
    Best Regards.

    Hello
    I will try to give you few answers and I hope it will help you.
    > So, I was thinking if the only way to clean my entire disk is to use the Recovery DVD?
    > I ask this because I think that the computer becomes too "heavy" with all the applications it came with. So I was > wondering if I can format the Hard Drive instead of recover it.
    I do not understand what you mean with I can format the Hard Drive instead of recover it but you can do follow: install OS using delivered recovery media and after doing this remove all applications you do not need. After doing this maybe your notebook will not be heavy anymore.
    > If I format the drive do I loose warranty?
    NO.
    > Is there any future problem related to genuine software?
    I do not know what you mean exactly
    > It's possible to install Windows XP Pro (and not the actual windows xp media center) with the original Operative system's product key?
    No. Something like this is not possible. Product key belongs to delivered and preinstalled OS.

  • Some questions about Muse

    First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
    The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
    It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html).  I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
    Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
    A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
    The hits from Facebook have sometimes very long links, eg.
    (http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident,  moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
    The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but  the text after export and moving cursor into it does not change color for some reason.
    I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
    The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
    The comments Disqus do not load, especially at horizontal layouts  (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
    YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
    Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
    On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
    This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
    Is it possible to make an option of  scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
    Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
    I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
    In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
    According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
    The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
    Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
    I’m using Adobe Muse 7.2 on OS X 10.9.1.
    and I'm sending Muse file to <[email protected]>

    Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
    Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
    Here is the link to the old forums- http://support.muse.adobe.com/muse

  • Few questions about apex + epg and cookie blocked by IE6

    Hi,
    I would like to ask a few questions about apex and epg.
    I have already installed and configured apex 3.2 on oracle 10g (on my localhost - computer name 'chen_rong', ip address -192.168.88.175 ), and enable anonymous access xdb http server.
    now,
    1. I can access 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' without input username / password for realm 'XDB' in IE6;
    2. I can access 'http://localhost/apex/apex_admin' , 'http://192.168.88.175/apex/apex_admin' , and I can be redirected into apex administation page after input admin/<my apex admin password> for realm 'APEX' in IE6;
    3. I can access 'http://chen_rong/apex/apex_admin' in IE6, but after input admin/password , I can not be redirected into administation page, because the cookie was blocked by IE6.
    then, the first question is :
    Q1: What is the difference among 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' ? I have already include site 'chen_rong' into my trusted stes! why the cookie was blocked by IE6. I have already tried firefox and google browser, both of them were ok for 'chen_rong', no cookie blocked from site 'chen_rong'!
    and,
    1. I have tried to use the script in attachment to test http authentication and also want to catch the cookie by utl_http .
    2. please review the script for me.
    3. I did:
    SQL> exec show_url('http://localhost/apex/apex_admin/','ADMIN','Passw0rd');
    HTTP response status code: 401
    HTTP response reason phrase: Unauthorized
    Please supplied the required Basic authentication username/password for realm XDB for the Web page.
    Web page http://localhost/apex/apex_admin/ is protected.
    MS-Author-Via: DAV
    DAV: 1,2,<http://www.oracle.com/xdb/webdav/props>
    Server: Oracle XML DB/Oracle Database
    WWW-Authenticate: Basic realm="XDB"
    Date: Tue, 04 Aug 2009 02:25:15 GMT
    Content-Type: text/html; charset=GBK
    Content-Length: 147
    ======================================
    PL/SQL procedure successfully completed
    4. I also did :
    SQL> exec show_url('http://localhost/apex/apex_admin/','ANONYMOUS','ANONYMOUS');
    HTTP response status code: 500
    HTTP response reason phrase: Internal Server Error
    Check if the Web site is up.
    PL/SQL procedure successfully completed
    SQL> exec show_url('http://localhost/apex/apex_admin/','SYSTEM','apexsite');
    HTTP response status code: 401
    HTTP response reason phrase: Unauthorized
    Please supplied the required Basic authentication username/password for realm APEX for the Web page.
    Web page http://localhost/apex/apex_admin/ is protected.
    Content-Type: text/html
    Content-Length: 147
    WWW-Authenticate: Basic realm="APEX"
    ======================================
    PL/SQL procedure successfully completed
    my second questions is :
    Q2: After I entered into realm 'XDB', I still need went into realm'APEX'. how could I change the script show_url to accomplish these two tasks and successfully get the cookie from site.
    the show_url script is as following:
    CREATE OR REPLACE PROCEDURE show_url
    (url IN VARCHAR2,
    username IN VARCHAR2 DEFAULT NULL,
    password IN VARCHAR2 DEFAULT NULL)
    AS
    req UTL_HTTP.REQ;
    resp UTL_HTTP.RESP;
    name VARCHAR2(256);
    value VARCHAR2(1024);
    data VARCHAR2(255);
    my_scheme VARCHAR2(256);
    my_realm VARCHAR2(256);
    my_proxy BOOLEAN;
    cookies UTL_HTTP.COOKIE_TABLE;
    secure VARCHAR2(1);
    BEGIN
    -- When going through a firewall, pass requests through this host.
    -- Specify sites inside the firewall that don't need the proxy host.
    -- UTL_HTTP.SET_PROXY('proxy.example.com', 'corp.example.com');
    -- Ask UTL_HTTP not to raise an exception for 4xx and 5xx status codes,
    -- rather than just returning the text of the error page.
    UTL_HTTP.SET_RESPONSE_ERROR_CHECK(FALSE);
    -- Begin retrieving this Web page.
    req := UTL_HTTP.BEGIN_REQUEST(url);
    -- Identify yourself.
    -- Some sites serve special pages for particular browsers.
    UTL_HTTP.SET_HEADER(req, 'User-Agent', 'Mozilla/4.0');
    -- Specify user ID and password for pages that require them.
    IF (username IS NOT NULL) THEN
    UTL_HTTP.SET_AUTHENTICATION(req, username, password, 'Basic', false);
    END IF;
    -- Start receiving the HTML text.
    resp := UTL_HTTP.GET_RESPONSE(req);
    -- Show status codes and reason phrase of response.
    DBMS_OUTPUT.PUT_LINE('HTTP response status code: ' || resp.status_code);
    DBMS_OUTPUT.PUT_LINE
    ('HTTP response reason phrase: ' || resp.reason_phrase);
    -- Look for client-side error and report it.
    IF (resp.status_code >= 400) AND (resp.status_code <= 499) THEN
    -- Detect whether page is password protected
    -- and you didn't supply the right authorization.
    IF (resp.status_code = UTL_HTTP.HTTP_UNAUTHORIZED) THEN
    UTL_HTTP.GET_AUTHENTICATION(resp, my_scheme, my_realm, my_proxy);
    IF (my_proxy) THEN
    DBMS_OUTPUT.PUT_LINE('Web proxy server is protected.');
    DBMS_OUTPUT.PUT('Please supply the required ' || my_scheme ||
    ' authentication username/password for realm ' || my_realm ||
    ' for the proxy server.');
    ELSE
    DBMS_OUTPUT.PUT_LINE('Please supplied the required ' || my_scheme ||
    ' authentication username/password for realm ' || my_realm ||
    ' for the Web page.');
    DBMS_OUTPUT.PUT_LINE('Web page ' || url || ' is protected.');
    END IF;
    ELSE
    DBMS_OUTPUT.PUT_LINE('Check the URL.');
    END IF;
    -- UTL_HTTP.END_RESPONSE(resp);
    -- RETURN;
    -- Look for server-side error and report it.
    ELSIF (resp.status_code >= 500) AND (resp.status_code <= 599) THEN
    DBMS_OUTPUT.PUT_LINE('Check if the Web site is up.');
    UTL_HTTP.END_RESPONSE(resp);
    RETURN;
    END IF;
    -- HTTP header lines contain information about cookies, character sets,
    -- and other data that client and server can use to customize each
    -- session.
    FOR i IN 1..UTL_HTTP.GET_HEADER_COUNT(resp) LOOP
    UTL_HTTP.GET_HEADER(resp, i, name, value);
    DBMS_OUTPUT.PUT_LINE(name || ': ' || value);
    END LOOP;
    -- Read lines until none are left and an exception is raised.
    --LOOP
    -- UTL_HTTP.READ_LINE(resp, value);
    -- DBMS_OUTPUT.PUT_LINE(value);
    --END LOOP;
    UTL_HTTP.GET_COOKIES(cookies);
    dbms_output.put_line('======================================');
    FOR i in 1..cookies.count LOOP
    IF (cookies(i).secure) THEN
    secure := 'Y';
    ELSE
    secure := 'N';
    END IF;
    -- INSERT INTO my_cookies
    -- VALUES (my_session_id, cookies(i).name, cookies(i).value,
    -- cookies(i).domain,
    -- cookies(i).expire, cookies(i).path, secure, cookies(i).version);
    dbms_output.put_line('site:'||url);
    dbms_output.put_line('cookies:');
    dbms_output.put_line('name:'||cookies(i).name);
    dbms_output.put_line('value:'||cookies(i).value);
    dbms_output.put_line('domain:'||cookies(i).domain);
    dbms_output.put_line('expire:'||cookies(i).expire);
    dbms_output.put_line('path:'||cookies(i).path);
    dbms_output.put_line('secure:'||secure);
    dbms_output.put_line('version:'||cookies(i).version);
    END LOOP;
    UTL_HTTP.END_RESPONSE(resp);
    EXCEPTION
    WHEN UTL_HTTP.END_OF_BODY THEN
    UTL_HTTP.END_RESPONSE(resp);
    END;
    /

    I use oracle database enterprise edtion 10.2.0.3. I have already figured out the epg on 10.2.0.3 to support apex 3.2.
    And as I described above, the apex site works fine for ip address , and localhost. but the cookie will be blocked by IE6, if I want to access the site by 'http://computername:port/apex/apex_admin'. This problem does not occured in firefox and google browser. Could someone give me answer?

  • Question about "Native ISO" and Color Grading in PP

    I have a question about "Native ISO" in the real world and how it relates to color grading.  I was shooting 35mm film before all these digital cameras became flat-out amazing practically overnight.  Then the goal was always to shoot with the lowest ISO possible to achieve the least amount of grain (unless you were making an artistic decision to get that look).  If I was shooting outside plus had a nice lighting package I'd shoot 5201/50 ASA (Daylight) and 5212/100 ASA (Tungsten) 99 times out of 100.
    I've recently been shooting a lot with the Blackmagic 4K and have read that its "Native ISO" is 400.  Because of my film background this seems counter-intuitive.  Yesterday I was shooting for a client and had the camera at an f16 with a 200 ISO.  Because of what I'd read, I was tempted stop down to an f22 and change my ISO to 400... but the "little film voice in my head" just wouldn't let me do it.  It kept telling me "Higher ISO means more noise... stay at 200 and you will get a cleaner image".
    So how does it work with "Native ISO"?  Should I really shoot at a 400 ISO every chance I get in order to capture the best image for how the camera is calibrated?  Will it really give me more latitude when color grading?  Or would I still get a cleaner image staying at ISO 200?   I've Googled around quite, but haven't found any articles that answer specifically this question.  Would love to hear from someone who knows a bit more on the subject or has a link that could point me in the right direction.
    Thanks much.

    Hey, shooter ... yea, interesting discussion and always nice to learn. Great pic, too!
    jamesp2 ...
    Great answer. I've followed quite a bit of the discussion about the BM cams as well, one does feel a need to check out the possibilities for that next beastie one will need to acquire. But ... which one?
    I've always been a bit of a hard-case about testing testing testing. For instance, what happens with dome down or use of a flat diffuser vs. dome in the up position in metering? Back in the film days, we had our own lab and did our own printing as well as the um ... difficult images ... from other studios. I needed to know how to get exactly the same diffuse highlight no matter whether it was a "standard" light 3:1 studio shot, or a near-profile with no fill that needs dark shadows. I tested & burned through boxes of medium-format polaroid & 120 film and a lot of color paper. Finding? To get the same print time no matter the contrast or lighting style, needed to be metered either with the flat disc (Minolta) or dome-down (Sekonic) and held at the highlight-location pointed at the main light source. I could meter and nail the exposure every time. Ahh no, insist so many ... one must have the dome on/up and pointed at the camera! Right. Do that, change the contrast, and see what happens to your diffuse forehead highlight on a densitometer ... and see how your printing exposure times change. Oh, and you've just moved your center-of-exposure up or down on the film's H&D curve, which will also change the way the shadows & highlights print. In truth, though it was subtle, we had realistically no matter latitude for a best-case image with pro neg film as one had with chromes. You could probably get away with being "off" easier, but it still wasn't dead-on.
    So wading into video ... oi vey, you may have noticed the things claimed here there & everywhere ... this setting is God's Gift to Humanity but no, it's total crap ... this sensor is totally flawed but someone else is certain it's the finest piece out there. Yes, opinions will be all over ... but ... in film, it was the densitometer. In video, it's the scopes. Truth. And getting to that can be a right pain. I've seen quite a few contradictory comments about using the BM cams in film mode and also at ISO 200. Yours above gives the most ... comforting? ... explanation (for me) because of your reference to your scopes & the waveform patterns. Thank you.
    Love to learn ...
    Neil

  • Can I replace the cable of the TravelSound 400 by a standard audio cable if I damage it?

    I am very interested by the TravelSound 400. Before buying it, I would like to ensure me that its cable is well separated from the speakers, that if I damage it I can replace it by a standard audio cable and that I will not have to purchase a new speaker system. Thank you in advance for your answer.

    Thank you for your answer KokChoy-CL,
    Will it be possible to replace the original cable if it's damaged at a reasonable price (compared with the standard cable price) or shall I be obliged to buy another speaker system?
    Thank you in advance for your answer to this question.

  • Problem with Travelsound 400

    Hello! Soem days ago I experienced something odd with my Travelsound 400 speakers. It seems like their "maximum volume" is decreasing. If I try to go above this level, I get a lot of noise, and the volume resets to a much lower level (got the Travelsound connected to my Zen Vision:M). Does this mean that I've damaged the speakers? They're only one month old, but I'm quite worried Regards from Anders

    I'm just beginning my troll through the forums looking for answers to unpredictable firewire behavior. In our situation we'll have a drive mounted over FW800, then plug in a sony hdv deck (which has been fine for a few years) and all of a sudden the firewire port goes down. We get device removal errors, reboot, plug into different ports, all that stuff. Nothing
    We had this problem on a MacBook Pro, Powerbook G4, and the almighty Mac Pro (Ever gone into an Apple Store with problems and all they can recommend is buying the latest and greatest?). The only common factor in all of this is Leopard. So that's where I'm starting.
    Firewire has always been picky about how and when you plug things in, but it doesn't make sense that this problem exists on completely different machines and we have the same procedure that worked for several years.

  • TravelSound 400 Q's

    I have 2 questions regarding the TravelSound 400 speaker system, any help would be appreciated. Soon I wish to buy the new E-TEN M600+ PDA System.
    (http://www.etencorp.com/products/Communication/600+.php)
    I want to know whether or not the TravelSound 400 will work with the M600+ or not, I assume it does, but just want to verify. Also, is there an online shop in Australia that sells the TravelSound 400, with the power cable accessory? Thank you,
    Aiden

    Hi,
    Where exactly queues are getting stuck? In SMQ2 or SM58.
    If it is SMQ2, try to activate the queue by going to SMQ2 and click on the queue and activate.
    Btw. what is the error you are getting in SMQ2.. If it is a SYSFAIL, find the out the reason for the same.
    Also if you are not able to activate the queue, try out deactivating that specific queue in SMQR and then go to SMQ2 and activate it. Then remember to Register that queue again in SMQR.
    Also you can schedule the report as mentioned in the blog earlier post)
    If it is tRFC queue error in SM58 ,then find out the problem...also try to execute the LUWs one-by-one..
    For all these Queue problems make sure that, your message size is ok as expected, no previous queue has got errored out, reciever is ready etc,
    Regards,
    Moorthy

  • A question about ALV subtotal

    Hello Expert,
    I have a question about ALV subtotal
    In my ALV output, there are three columns: SalesOrder, Item, Sales Volumn. Suppose there are following data in the ALV output
    SalesOrder   Item   Volumn
    123              10      100.00
    123              20      300.00
    456              10      200.00
    456              20      500.00
    What I want in the ALV outpu is as below:
    SalesOrder   Item   Volumn
    123              10      100.00
    123              20      300.00
                     subtotal  400.00
    456              10      200.00
    456              20      500.00
                     Subtotal 700.00
    Total                       1100.00
    Is this possible, and how can I achieve that result?
    Thanks & Regards, Johnny

    You can use sortinfo structure of ALV.
      Data:GT_SORT TYPE slis_t_sortinfo_alv.
      GTT_SORT-FIELDNAME = 'VBELN'.
      GTT_SORT-UP = 'X'.
      GTT_SORT-SUBTOT = 'X'.
      APPEND GTT_SORT TO GT_SORT.

  • Questions about your new HP Products? HP Expert Day: January 14th, 2015

    Thank you for coming to Expert Day! The event has now concluded.
    To find out about future events, please visit this page.
    On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us.  We hope you will return to the boards to share your experiences, both good and bad.
     We will be holding more of these Expert Days on different topics in the months to come.  We hope to see you then!
     If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
    So, what is HP Expert Day?
    Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
    Ok, how do I get started?
    It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
    We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
    What if I need more information?
    For more information and a complete schedule of previous events, check out this post on the forums.
    Is Expert Day an English-only event?
    No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
    Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
    Korean Forum: January 15th 10am to 6pm Korea Time
    Simplified Chinese Forum: January 15th 10am to 6pm China Time
    Looking forward to seeing you on January 14th!
    I am an HP employee.

    My HP, purchased in June 2012, died on Saturday.  I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank.  When I turned it on, I got a Windows Error Recovery message.  The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything. 
    I'm not happy with HP.  Any suggestions?

  • Have questions about your Creative Cloud or Subscription Membership?

    You can find answers to several questions regarding membership to our subscription services.  Please see Membership troubleshooting | Creative Cloud - http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html for additional information.  You can find information on such topics as:
    I need help completeing my new purchase or upgrade.
    I want to change the credit card on my account.
    I have a question about my membership price or statement charges.
    I want to change my membership: upgrade, renew, or restart.
    I want to cancel my membership.
    How do I access my account information or change update notifications?

    Branching to new discussion.
    Christym16625842 you are welcome to utilize the process listed in Creative Cloud Help | Install, update, or uninstall apps to install and evaluate the applications included with a Creative Cloud Membership.  The software is fully supported on recent Mac computers.  You can find the system requirements for the Creative Cloud at System requirements | Creative Cloud.

  • Questions about using the Voice Memos app

    I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
    -Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
    -When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
    -In your opinion, how is the recording quality of the voice memos app?

    You cannot import your Android voice memos to your iPhone's voice memo app.  You might be able to play the Android memos and have the iPhone pick up the audio and record it.
    Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
    App quality is excellent.

  • Re: Question about the Satellite P300-18Z

    Hello everyone,
    I have a couple of questions about the Satellite P300-18Z.
    What "video out" does this laptop have? (DVI, s-video or d-sub)
    Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
    What is the warranty on this laptop?

    Hello
    According the notebook specification Satellite P300-18Z has follow interfaces:
    DVI - No DVI port available
    HDMI - HDMI-out (HDMI out port available)
    Headphone Jack - External Headphone Jack (Stereo) available
    .link - iLink (Firewire) port available
    Line in Jack - No Line in Jack port available
    Line out Jack - No Line Out Jack available
    Microphone Jack - External Micrphone Jack
    TV-out - port available (S-Video port)
    VGA - VGA (External monitor port RGB port)
    Also you can connect it to your LCD TV using HDMI cable.
    Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

Maybe you are looking for