Question about tx2-1300 Series

What I would like to know is whether this current model family has a pressure sensitive stylus or is Wacom Penabled. I am currently researching several tablet PCs for my next purchase, and being an artist, I need to make sure that either the stylus supplied with the tablet PC supports full pressure sensitivity or supports a Wacom Penabled stylus, as I rely heavily on pressure sensitivity for my work.
I would buy a Wacom Cintiq 12WX but it costs $1700 in Australia, so if I bought a Wacom Penabled tablet PC, then I'd get a big bang for my buck
If an HP Technician/Official can answer this enquiry, that would be greatly appreciated.

TX2-1300 series tablet PCs come with N-Trig duosense but not Wacom. I did not test the pressure sensitivity. However, HP advertises that it is pressure sensitive.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Similar Messages

  • A question about the tv series i purchased

    I recently ordered the ghost hunters season 2 series from Itunes and the disclaimer on the music store web site reads .
    "The season pass includes all current and future episodes of Ghost Hunters , Season 2 . curent episodes will download immediatley and future episodes will download as they become available "
    My question is on the ghost hunters scifi website there are 13 episodes in season 2 not included on the music store . But the disclaimer on the website says plainly
    " The season pass includes all current and future episodes of Ghost Hunters " So is that not true ? Will only new episodes be available?

    I wrote to apple about the season pass missing out on the first 13 episodes, and here is the lip service response I received:
    Thank you for contacting the iTunes Music Store. I apologize for any frustration having out of order episodes may have caused you.
    Apple takes the quality of products offered on the iTunes Music Store very seriously. We will investigate the season pass video issue you reported in depth, and we will notify you as soon as more information is available.
    The iTunes Music Store is dedicated to creating a pleasant shopping alternative for media lovers of all walks of life. Thank you for your patience as we work to make your experience with the iTunes Music Store more enjoyable.
    In the meantime, you may wish to ensure that your computer meets the minimum system requirements, and your iTunes and QuickTime software is up to date.
    To play purchased videos, you need iTunes 6 or later, which has the following minimum system requirements:
    Windows users will need...
    1.5 GHz Pentium 4 for purchased video playback.
    Windows 2000 or Windows XP with the latest service packs installed.
    256 MB RAM and 32 MB of video memory to play purchased videos.
    QuickTime 7.0.3 or later.
    Recommended: A broadband Internet connection for accessing the iTunes Music Store.
    You can download the latest version of iTunes and QuickTime at no charge from our website.
    http://www.apple.com/itunes/download/
    http://www.apple.com/quicktime/download/
    I hope that you continue to enjoy purchasing from the iTunes Music Store.
    Sincerely,
    Tony
    The iTunes Music Store team
    That is NO HELP at all!!

  • Questions about parallel and series sturcture in SCTL (single clock timed loop) in FPGA VI

      I am using LV 8.2.
      I have wriiten a FPGA VI, in this VI, there are 3 filters inside the SCTL (single clock timed loop) (I use the shift register to be the effect of unit delay). Would I save the resources of the FPGA used (such as slices and LUT) in the compliation report if I use 3 SCTL ( 1 SCTL contain 1 filter)  and cascade them in series?
      Thank you! 

    Sorry, I am afraid that you have misunderstood my meaning.
    Here is the method you suggested before:
      I mean I use the shift registers attached in the while loop, not in the SCTL. The number of shift registers used will not be decreased when we increase the number of SCTL in the second plate of the flat sequence structure.  Totally , there are 6 pairs shift registers for 3 filters (1 filter needs 2 pairs). I mean I put the calculation parts, such as b0*x[n]+b1*x[n-1]+b2*x[n-2] inside the SCTL ( the operations of multiplication and add). Instead of putting 3 filters numeric operation part in one SCTL. will we reduce the resources used if we use 1 SCTL to do the operation parts of 1 filter? As the code inside each SCTL will be reduced.
      Maybe you tell me if such approach will reduce the reosources used? Or there is no difference?
      Thank you!

  • About Aironet 1300 Outdoor Bridge.

    Hi,
    I have a question about Aironet 1300 series Outdoor Bridge.
    in case of 1300 series, it is supporting with 802.11g protocol. BTW, I wanna use it with 802.11a protocol on Aironet 1310 series. Is it possible ?
    If so, how to do I have to it ?
    I wait your good answer.
    Thanks.
    Best Regards.

    1310 only support 11b/g, not support 11a.
    1410 support 11a

  • Basic questions about Ironport

    Dear responder,
    I have some questions about the S series Web Security Ironport, It would be appreciated to respond it one by one.
    1-Is ironport can work independently if i buy it alone and put it on the edge of my network and connect the internet to the one of that ports and connect my local lan switch to the other port?
    2-If i can use it independanly can i use it in the Transparent proxy mode not the explicit one and make it sensitive to the Http traffic to bring the Authentication page for new users who want to connect to the Internet?
    3-Is there any authentication page in ironport or i have connect to the ironport to use Internet like VPN connection by an agent?
    4-Assume that if a user is currently log-in and the user wants to log-out, it there any way to Logout from the Ironport with a specific page for loging-out?
    5-Is there any local database is available into the Ironport to create users?
    6-Is there any option to define radius or Ldap server address as User database to read when needed for authentication propose?
    thank you so much.
    Abraham

    Good Afternoon Abraham,
    In my answers I'll assume you'll get AsyncOS 7.5 for Web for your WSA.
    1.  This is "in-line" mode, and while the documentation doesn't specifically say you can't do this, it doesn't say you can either.  The support on this is fuzzy.   There are 2 supported ways to deploy a WSA: Transparent redirection (using WCCP or policy-based routing), or explicit mode, using settings in the browser, or PAC files.
    2. If I understand your question, the answer is yes.  With transparent redirection, you can force all http traffic to the WSA, and require users to authenticate.  You can force the users to enter a username and password, or it can happen automatically (see answer 3)
    3. There are a few ways to handle authentication for your users: 
         They can authenticate to the the ironport, which can do a lookup against your LDAP or Active Directory.
         It can transparently authenticated them if you're using Active Directory and a browser that supports it (IE, Firefox, Chrome)
         You can use the ADAgent (runs on a seperate box) which scrapes the security logs from the AD domain controllers and passed authenticated users and their IP to the the Ironport.
    4. I'm not aware of a "logout" page.
    5. There is a "local database" for administrative users, and you can use RADIUS for administrative users, but not for your regular users. (see answer 6)
    6. Yes. You can use LDAP, Novell eDirectory, or Microsoft Active Directory for your users.
    I hope that helps!
    Ken

  • Questions about Feature Licenses for 1800, 2800, 3800, 2900, 3900 series ISRs

    Hey all,
    I have a question about feature licensing for Cisco ISR 1800, 2800, 3800, 2900 series. I know there are differences between all of the series. My main question which applies for all the Cisco ISR series is this:
    "If I want to upgrade the IOS to a newer version and upgrade from the basic feature set, do I need to get a license from Cisco? "
    If yes:
    And if so, how do I go about purchasing a license? Is a support contract needed?
    Again, I need to know for each Cisco ISR series. I'd appreciate any help on this. 
    Thanks,
    John

    You probably want to reach your SE/AM about this so they can explain you exactly how this works, maybe some sales material, or you can also reach pre-sales.

  • I have few questions to ask about the Expert Series and Valet Series

    Hello.
    I have few questions to ask about the Expert Series and Valet Series.
    1. I see there aren't any print server/bridge/access point for these two new series. Do I have to use previous ones? Or the new ones are in planned in near future?
    2. Do I "HAVE TO USE CONNECT SOFTWARE"?  Can I just use web interface to do every setting that these routers features?
    3. Does expert series routers support guest network and parental control?
    4. When I look into informations of these router, some router doesn't give information about backward compatible to older standards. Do I have to consider that as they are backward compatible with older standards?
    Ok, that's all for now.
    If I need to ask more questions I will do that in this thread as reply

    With the New Expert or the Valet Series Router, you still can use the Print Server / Bridge and Access Points.
    Well with the Expert and Valet Series router, you have an option to User Cisco Connect Software or you can User Web Interface of the Router. But with the Cisco Connect Software you have an Advantage of creating a Guest Account and using Parental Control , which is not available using the Web Interface.
    These both the routers are backward compatible and they can connect to your G Series Product.

  • Question About Adding Ram from other laptop to T-series Thinkpad

    Hi,
    I have a question about adding additional RAM. Right now I have a 4gb ram stick in the t510. I have an acer laptop which I do not need and there is a 4GB ram stick onboard (maybe two 2gb ram sticks) there in that older laptop. Would it be possible to add one stick of 2gb ram (or 4gb i need to check if it is 2 or 1) from the acer to the lenovo thinkpad making the total ram in the thinkpad over 4gb????
    Thanks in advance

    Hi Richk,
    Yes, I am using a 64-bit operating system. I am running on windows 7. And as for reported incompatibilities....technically taking a RAM from another laptop and placing it in the laptop should be the same as purchasing a RAM card from ebay or something and putting into the laptop right?

  • Questions about 3702i and WSM (WSSI)

    I have several questions about the 3702i AP and the WSM that do not seem to be answered in the data sheets/documentation.
    Any insight would be appreciated.
    1. Is the WSM officially supported on the 3702 AP? The documentation seems to conflict on this.
    For example, at the top of the WSM data sheet: "Flexible add-on third radio module for the Cisco Aironet 3600i or Cisco Aironet 3600e Series Access Points". Then later on in the page graphic shows the 3700 series radios too. I have found multiple pages that have similar conflicting information.
    2. Can the WSM be used WITHOUT MSE and Cisco Prime? If so, are there any limitations?
    3. How does the licensing work? Where is the license installed -- WLC, MSE, Prime? Do ANY of the features work without the license?
    3a. How do you order the license? The SKU listed on the data sheet (L-WIPS-MM-1AP) is not a valid part number in CCW.
    4. Is it possible to do sniffing with a WSM? (the idea being not having to dedicate an AP to sniffing, or taking down a client-serving AP to sniff)
    Thank you.

    Ok, so you are talking about off-channel scanning, which is actually a very short duration 50ms, that the AP is actually off-channel to scan.
    http://mrncciew.com/2013/03/16/configuring-rrm/
    Are you thinking of this bullet point?
     Access points with wireless security module: The Cisco Aironet® Access Point Module for Wireless Security aggressively scans all channels without affecting the data-serving radios in the 2.4- and 5-GHz bands.
    To me, that's just saying that the WSM is scanning and not interferring with the AP's normal radios.
    HTH,
    Steve

  • Few questions about difference between Satellite P70 , L70, S70

    Hello, i have many questions about the series P70 , L70, S70 that come with a 1920x1080 panel.
    1) What are the differences between the L70 and S70 series? Except of the HDD capacity and RAM, the notebooks look pretty identical.
    2) Do P70 , L70, S70 support a 2nd HDD or is it just the P70 series that support it ?
    3) Do all three (P70, L70, S70 series) come with the same TFT Panels ?
    4) Which of the above series supports mSata ?
    5) Do all of the model of each series come with a mSata support? E.g. Could it be that L70-a-13m supports mSata while the L70-a-146 does not ?
    6) All of the above, come with a S-ATA II or S-ATA III interface ?
    7) Which is the best of those series listed ? I am trying to understand what makes the big difference from S70 to P70 except of the casing for example.
    Thank you in advance.

    >1) What are the differences between the L70 and S70 series? Except of the HDD capacity and RAM, the notebooks look pretty identical.
    What Sat L70 and S70 models do you mean exactly? There are different L70-xxx and S70-xxx models on the market which supports different hardware specifications.
    >2) Do P70 , L70, S70 support a 2nd HDD or is it just the P70 series that support it?
    As you can see in this [Sat P70 HDD replacement document,|http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports 2nd HDD bay BUT even if there is an 2nd HDD bay this does not mean that you could use 2nd HDD. In case the 2nd HDD bay would be equipped with HDD connector, you could use the 2nd HDD
    I found also the [Sat L70/S70 HDD replacement |http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] document on Toshiba page and there I can see that 2nd HDD bay is not available
    > 3) Do all three (P70, L70, S70 series) come with the same TFT Panels?
    See point 1). Different P70, L70, S70 models were equipped with different hardware parts.
    > 4) Which of the above series supports mSata?
    As far as I know only some P70 models are equipped with an 256GB mSATA-SSD.
    > 5) Do all of the model of each series come with a mSata support? E.g. Could it be that L70-a-13m supports mSata while the L70-a-146 does not ?
    See point 4) not all models supports the same hardware specifications
    > 6) All of the above, come with a S-ATA II or S-ATA III interface ?
    I dont think that SATA III is supported. I guess it would be SATA II
    > 7) Which is the best of those series listed ? I am trying to understand what makes the big difference from S70 to P70 except of the casing for example.
    Not easy to answer because there are too many models released in Europea.
    And not all models are available in each country. So I guess you will need to look for models which were released in your country.

  • Question about Video Cards on Laptops

     Hi everyone, and sorry if I post this in the wrong area. I own a few computers, some are consider ancient and others are somewhat old but can run Windows XP just fine. I have a question about the computers in the stores today.
    I am looking to invest in a new laptop, possibly a desktop in the near future depending on my budget. The question I have about video cards today is that, I enjoy a good MMO game now and then, I don't expect to play heavy intensive games, just maybe some more advance games. I notice that for one game that I want to play, it requires a video card to have (Shadow Rendering, Vertex and Pixle Shaders). Do the computers today have those as standard for thier video card? Or do I have to invest in a little bit more expensive laptop/desktop. I am willing to invest money for some more RAM, if I need to improve its preformance. The reason I ask is because I have a 4 year old Laptop with a broken keyboard, and I was thinking about just replacing the laptop with a newer one. it has some pretty good specs and runs everything fine, but it can not play certain games because of those missing video requirements. (Current laptop incase someone is curious: 1.5Ghz Celeron M, 1GB memory 64MB video (Shared) ) Thanks to anyone who has the answer to this question. (P.S sorry if everything is scrunched together. for some reason the formatting is wierd on Opera web browser

    Graphics cards have all those standard today... or at least they should unless you get a really cheap Graphics card. The kind of graphics card and processor and other specs of the computer you want to get should depend on what you want to do with it. It also depends on the kind of games you want to play. If you're playing FPS [first person shooter] then you need a really good graphics card and processor. If you're playing something like Diablo 2 or something that's on the lower end of graphics then you just need decent specs. Graphics cards, I suggest something with aGeForce Nividia card... as of today, they are in the 9 series for high-end cards I believe. For processors... get something like Intel Core 2 Duo T9500 or T9600 or the Core 2 Quatros or Extremes. Extremes are intended for hardcore gaming and would be more expensive. For RAM you should have at least 2GB... you can always upgrade that later.
    For laptops my suggestions are:
    $3k+ get a customized alienware
    $2-3 get a customized dell xps, or macbook pro [although if you're gaming i would suggest you dual boot with windows xp or vista]
    $1-2k get a cheaper customized dell, or sony vaio
    under $1k... well I don't know what to say... you can't really get a nice gaming computer for under that price.
    I personally DO NOT like HP computers at all because they are so quirky and have so many problems and break down easily.

  • Question about setup_MITE in the PCI-MIO-16E-1

    I have a quick question about setup_MITE in the PCI-MIO-16E-1. In one of the manuals, it states that if you're using Dell Optiplex GX series for our hardware configuration, is it true we need to re-write the MITE functions to correlate with the hardware? Please if you can clarify what this means, I would really appreciate it. Thank you in advance.

    National Instruments is starting a new newsgroup to provide a forum for customers to discuss register level programming issues and ask questions. This newsgroup is not a direct support channel for register level programming, but may be monitored by National Instruments engineers. Please post you question with additional detail in:
    natinst.public.daq.driver-development.general
    Christian
    Christian Loew, CLA
    Principal Systems Engineer, National Instruments
    Please tip your answer providers with kudos.
    Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
    or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
    to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

  • Questions about OLE containers

    Hello,
    I try to use an OLE container for save any type of documents, the majority are Microsoft Word (*.doc), Acrobat Reader (*.pdf) and images (*.jpeg, *.jpg, *.bmp, ...)
    I prove to insert a document an save it in the database and all works fine. The document is saved in a BLOB column, and if I try to activate the OLE container I view the document correctly, but I have questions about OLE container:
    1.- Once I saved the document into the database (the icon of the document is shown into the OLE container), if I query the database to retrieve the documents, the OLE container not shown the icon of the document, and if I try to activate the OLE container, making double-click, it doesn't make anything.
    I think that the query to the database don't retrieve correctly the documents into the OLE container.
    2.- Once I saved the document into the database (the icon of the document is shown into the OLE container), if I try to activate the OLE container, depend the document I need to do twice double-click to open the document.
    If I try to open a Word document (*.doc) it need one double-click to activate, but if I try to open an Acrobat document (*.pdf) it need twice double-click to activate.
    Why? How can I open any type of documents with one double-click?
    3.- The form that I develop will work in client-server and in web mode.
    The problem is that if I try to run the form into web mode with OLE container, I have an error:
    "FRM-92100: Se ha interrumpido la conexión con el Servidor. Puede ser el resultado de un error de red o fallo en el Servidor. Debe reestablecer la conexión", and if I click in Details I have "Java Exception: java.lang.ArrayIndexOutOfBoundsException ...".
    If I delete the OLE item, it works fine, and I don't have any errors.
    I know that OLE container doesn't works in web mode, because this I will develop this functionality with JavaBean, but I would like that in client-server mode works with OLE container.
    There are any way to do this, that in web mode doesn't has this error, and in client-server mode works with OLE container?
    Thank you very much
    Jordi

    2. If you use Time Machine you can't browse those pictures on the Movable DIsk. It's not designed to work like that.
    3. Don't use copy and paste, try drag and drop instead.
    You don't tell us how you are managing these photos. I suggest that you use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the everything. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
    Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

  • Question about document/literal web service

    Hello every body.
    I have some question about document/literal web service.
    I’ve been working with Axis before.
    Axis has four valid signatures for your message-style service methods:
    public Element [] method(Element [] bodies);
    public SOAPBodyElement [] method (SOAPBodyElement [] bodies);
    public Document method(Document body);
    public void method(SOAPEnvelope req, SOAPEnvelope resp);
    The same I am trying to do with WebLogic API for webservices.
    But when I am trying to test web service (public Document method (Document body); )
    I have serialized exceptions for org.w3c.dom.Document.
    Do I have to write a custom class for org.w3c.dom.Document serialization?
    If yes can you give me some idea or example?
    The all idea behind this web service is. I have just one web service and mane classes for XML processing. Depends what xml document will be during runtime, web service will be using different class for xml processing. It works fine with Axis, but in case of WebLogic I have some problem.
    One more question… How I have to call this web service from java client?
    I have seen this example http://www.manojc.com/?sample31 ,
    but this web service looks like (Document helloDom()). I need to send Document.
    This example works for Dynamic Proxy, but does not work for static call.
    Any ideas?? Thank in advance.

    Hi,
    I am getting a similar issue. I created a Document-style/literal webservice and deployed on Weblogic 9.2 . Then I generated client stubs using clientgen. I get the following exception stack trace:
    java.rmi.RemoteException: web service invoke failed: javax.xml.soap.SOAPException:
    failed to serialize class java.lang.Objectweblogic.xml.schema.binding.SerializationException: type mapping lookup failure on
    class=class com.sun.org.apache.xerces.internal.dom.DeferredDocumentImpl TypeMapping=TYPEMAPPING SIZE=3
    ENTRY 1:
    class: java.lang.Object
    xsd_type: ['http://xmlns.ozarkexpress.com/business/sell']:stns:echoDocumentResponse
    ser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@1125127
    deser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@18dfef8
    ENTRY 2:
    class: java.lang.Object
    xsd_type: ['http://xmlns.ozarkexpress.com/business/sell']:stns:echoDocument
    ser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@15e83f9
    deser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@2a5330
    ENTRY 3:
    class: java.lang.Object
    xsd_type: ['http://www.w3.org/2001/XMLSchema']:xsd:anyType
    ser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@bb7465
    deser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@d6c16c

  • 1300 series AP antennas

    Dear All,
    I wanted to ask whether AIRANT-24120 or other high gain bridge antennas can be used to provide Access point capabilities with 1300 series AP.
    My scenario is that, that i wanted to give roaming services to my WIFI clients in approx 15km range. But the data sheets suggests that these antennas can be used for point to point or point to mulipoint bridge scenarios not with the Access point role. In short i was hoping to use AIRANT-24120 with one 1300 series AP to provide AP capabilities with long range.
    Please guide me in this regard or suggest me any other solution.

    Thanks for clearing the concept, but one more question :)...so what can be the solution to connect a distant client several kilometeres away from my root ( any cisco product u can suggest ?) What i have in my mind is that i connect, two 1300s through omnis and use a bridge mode. and since bridge mode supports clients association this could solve my problem? correct me if i am wrong..

Maybe you are looking for