Question about URL

My website, www.jumpunder.com, is under construction, but I got my blog available.
When you click the link to the blog, the URL stays www.jumpunder.com, instead of www.jumpunder.com/blog, or something of the sort. I have godaddy and did all the masking and forwarding so i can get my homepage to end with the .com instead of some annoying iweb extention.
my question, is it possible to have my site change url everytime i click a page. I want it to say, "www.jumpunder.com/blog" for blogs and "www.jumpunder.com/movie" for movies.
Thank you so much

With domain masking the basic name, www.jumpunder.com, is replaced in all pages of the site. I don't think you can have it as you'd like. If you undo the masking you can have the /movie or /blog but the rest will be your standard .Mac URL.

Similar Messages

Question about URL iView parameters

Hi experts.
I have this issue: I have several iviews in DEV instance, URL iViews that points to backend applicationes. The URL parameters in DEV instance, point to DEV instance of backend applications. But when a will need to transport these iview to PROD instance, the URL parameters then I need to point to PROD instance of this backends apps.
Which is the best practices to resolve this issue ?
<b>Example:
in DEV instance:
URL iView "A" point to http://dev.app.com.
in PROD instance
URL iVIew "A" point to http://prod.app.com</b>
But i try to avoid change this parameters after transport to Production , in Production instance directly.
I think for example, use a some type of configuration file o .ini, in order to iviews "take" the URL string from it; and do not harcdode this strings.
Is possible? How?
I am clear?
thanks in advance!

thanks Atul, Wayne,
I could be use "http system" but..
Suposse this case:
In DEV instance, I have:
- URL iview "A" point to backend system "http://dev.zzz.com"
- URL iview "B" point to backend system "http://dev.xxx.com"
- URL iview "C" point to backend system "http://dev.yyy.com"
In PROD instance, I have:
- URL iview "A" point to backend system "http://prod.rrr.com"
- URL iview "B" point to backend system "http://dev.ddd.com/aspx"
- URL iview "C" point to backend system "http://dev.mmm.com/app3"
All different!. No pattern. If I use a Http system,I think that I am continue with the same problem: in the transport to PROD, I should be change all references, or all http systems.
For this reason, I am begin asking for use a some type of configuration file, but I dont know how.
thanks in advance..

Quick question about url/jsp mapping

Could anyone clarify whether the following mapping in the web.xml file is possible?
I want to access the file webapps\examples\gate\login.jsp by going to the page http://192.168.2.143:8080/work/login.jsp instead of http://192.168.2.143:8080/examples/gate/login.jsp
Currently I can map it fine to http://192.168.2.143:8080/examples/work/login.jsp,
which is an existing folder, but when I try and get it above the examples folder, it gives me the 404 error.
    <servlet>
        <servlet-name>Login</servlet-name>
        <jsp-file>/gate/login.jsp</jsp-file>
    </servlet>
    <servlet-mapping>
        <servlet-name>Login</servlet-name>
        <url-pattern>/../work/login.jsp</url-pattern>
    </servlet-mapping>

Using only work/login.jsp will cause an error, and the tomcat server to crash, if I use the pattern
<url-pattern>/work/login.jsp</url-pattern>, I just map the URL http://192.168.2.143:8080/examples/work/login.jsp instead of
http://192.168.2.143:8080/examples/gate/login.jsp
My entire webaps structure is rather long, and contains code other than my own, so I'd rather not post it, I just need to figure out if it is possible to map the jsp page to a path above the file. (do you think I need to do it in another web.xml?)

Question about (HttpURLConnection)url.openConnection();

Greetings Java Experts.
I have a question about the following code snippet.
As you can see below this snippet will establish a connection.
Question how long will it allow for the connection to be established - for example if the web traffic is taking an unusually long period of time can I set it to a higher value ?
connection = (HttpURLConnection)url.openConnection();
     HttpURLConnection.setFollowRedirects(true);
     connection.setInstanceFollowRedirects(true);
     connection.setUseCaches(false);
stev

forever, unless you set SO_TIMEOUT

Question about parsing parameters through url

Hello,
I have some questions about parsing parameters through a url.
What I want to build is a page with some text fields and maybe one drop down list. After user enter values into the text fields and select one option in the drop down list, then press the submit button, a report will be opened, which according to the parameters parsed.
These were what I have done:
1. create a blank page and a region
2. create one text field in the region, the name is FIRSTNAME
3. create one hidden items FN, of which the source value is item FIRSTNAME
4. create a process. the type is "Set Preference to value of Item" which set PN with the value of FIRSTNAME when the page submitted
5. create a button "Submit Page and Redirect to URL", in the URL I entered:
http://dianti.local.net:9704/xmlpserver/~shichao/GuestFolder/orderdetail/orderdetail.xdo?_xpf=&_xpt=0&_xdo=%2F~shichao%2FGuestFolder%2Forderdetail%2Forderdetail.xdo&FIRSTNAME=&FN.&_xt=orderdetail&_xf=pdf&_xmode=4
My problem is: it seems working for the first time after I entered a value in the FIRSTNAME text field and press submit button, but when I come back to the page (the report was opened in the same page, wondering how to open it in a new window?), the value is saved in the text field and after I enter another value and submit the page again. It still parse the old value to the report. The value of the parameter doesn't change.
What's the reason? and is this the correct way to build what I want?
Thank you in advance.
Best Regards,
Shichao

Hi Scott,
Thank you again for the help.
But this didn't answer my question exactly. I have tested what you created and the problem remains. When I first time enter a value in the text field and press the button, it goes to page 2, but the parameter didn't parsed. When I go back to page 1 and then click the button again. After that I can see the value I parsed on page 2. Same thing happens when I try to enter a new value. So which means the button has to been pressed twice to parse the parameter.
Due to the limitation of my knowledge of Apex. I don't know how to fix it. Could you please help me again and hope you understand what the problem is. Thank you very much.
Shichao

Question about mangled URLs

Hello,
I have a load testing app that I'm adapting to work with BSPs and I have a question about the mangled URLs that are used.
If I record a URL that is mangled, can I save that URL and reuse it during the playback of a session? From what I understand it includes things like theme, language and such. But obviously if it includes a session ID, it won't work.
Session ID seems to be stored in a cookie. Can it also be stored in a mangled URL and if so, why the duplication?
Any help greatly appreciated!
Thanks!!!

Those parameters are there for a reason; to pass along information to the page so that the dynamic content can be manipulated based on them. So your question really is: "Can I pass along this information to the page in another way than URL parameters?"
There are always options, but most of them require work. For example:
1) use a POST to generate the page
In a POST request the parameters are part of the request body, so you don't see them. The trouble is that a POST request cannot be created just like that; it requires some sort of form submission behind it. This can be facilitated with javascript (output a form and let the link submit it through an onclick handler), but it is far from a clean solution.
Added pain: form submits behave badly in combination with the browser back/forward buttons. Also, bookmarking cannot work like this.
2) "web 2.0". Using Ajax it is possible to do page updates in the background, so you could do the request (with parameters) asynchronously and update the page accordingly.
Added pain: again back/forward buttons and bookmarking will be broken unless you take very specific steps (that I don't know of myself).
3) conversation scope technology. Some APIs provide a so called "conversation" scope, which allows you to hold on to certain values across requests until you end the conversation. You could use this to push certain values into the conversation and reuse them in different pages without having to pass along the values as request parameters or in a form. Even without a conversation scope, you could simply abuse the session for this purpose.
I hope this has given you some idea how to go about implementing your requirement.

Re: Questions about Plan structure

Reply-To: "Duncan Kinnear" <[email protected]>
Q. if you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
A It is better to have them in the same plan.It depends on the design
you have
Q Why should the Managers be separated from their business classes?
A Managers are usually service objects which might require different
resources.
These managers when deployed might be required by several other
applications.
Seperating them as a different plan will help in just using one
installed partition to be
Used by different applications (refer about Reference Partition)
Q If you have the Database managers separate, what scope does each DB
manager cover?
A It is better to have the DB managers in user scope.
It depends on the numbers of users, u have for the system.
Since u are talking about 100 tables. It's a huge system.
It also depends on the user licenses u have for the backend.
Take care that u use proper load balancing of DB Managers for the
system.
Krishna CVSR
GoldStone Softech Inc
>
Hi there,
We are in the middle of designing the structure of a new system.
I have read/heard that it is best to break down the plans into the
following categories:
Business Classes
Managers/Services
Clients
I have a few questions about this structure:
Should related business classes be grouped together in Plans? E.g. if
you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
Why should the Managers be separated from their business classes?
E.g. if there is an EmployeeMgr service which deals with anything to do
with the Employee business class, why separate them in different
plans? If you need the manager to access the class, you will always
need both.
Some of the Forte documentation talks about "Policy" managers and
"Database" managers. How do the functions of these managers differ
for a simple CRUD (Create Read Update Delete) class?
If you have the Database managers separate, what scope does each
DB manager cover? I.e. do you have one for the entire database (over
100 tables in our case), or do you break it down by sub-system?
Thanks in advance for any answers.
Cheers,
Duncan Kinnear,
McCarthy and Associates, Email: [email protected]
PO Box 764, McLean Towers, Phone: +64 6 834 3360
Shakespeare Road, Napier, New Zealand. Fax: +64 6 834 3369
Providing Integrated Software to the Meat Processing Industry for over 10 years
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Reply-To: "Duncan Kinnear" <[email protected]>
Q. if you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
A It is better to have them in the same plan.It depends on the design
you have
Q Why should the Managers be separated from their business classes?
A Managers are usually service objects which might require different
resources.
These managers when deployed might be required by several other
applications.
Seperating them as a different plan will help in just using one
installed partition to be
Used by different applications (refer about Reference Partition)
Q If you have the Database managers separate, what scope does each DB
manager cover?
A It is better to have the DB managers in user scope.
It depends on the numbers of users, u have for the system.
Since u are talking about 100 tables. It's a huge system.
It also depends on the user licenses u have for the backend.
Take care that u use proper load balancing of DB Managers for the
system.
Krishna CVSR
GoldStone Softech Inc
>
Hi there,
We are in the middle of designing the structure of a new system.
I have read/heard that it is best to break down the plans into the
following categories:
Business Classes
Managers/Services
Clients
I have a few questions about this structure:
Should related business classes be grouped together in Plans? E.g. if
you have an Employee class with related EmployeeSubordinate and
EmployeeSalaryHistory classes, should these all be in the same plan?
Why should the Managers be separated from their business classes?
E.g. if there is an EmployeeMgr service which deals with anything to do
with the Employee business class, why separate them in different
plans? If you need the manager to access the class, you will always
need both.
Some of the Forte documentation talks about "Policy" managers and
"Database" managers. How do the functions of these managers differ
for a simple CRUD (Create Read Update Delete) class?
If you have the Database managers separate, what scope does each
DB manager cover? I.e. do you have one for the entire database (over
100 tables in our case), or do you break it down by sub-system?
Thanks in advance for any answers.
Cheers,
Duncan Kinnear,
McCarthy and Associates, Email: [email protected]
PO Box 764, McLean Towers, Phone: +64 6 834 3360
Shakespeare Road, Napier, New Zealand. Fax: +64 6 834 3369
Providing Integrated Software to the Meat Processing Industry for over 10 years
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Few questions about apex + epg and cookie blocked by IE6

Hi,
I would like to ask a few questions about apex and epg.
I have already installed and configured apex 3.2 on oracle 10g (on my localhost - computer name 'chen_rong', ip address -192.168.88.175 ), and enable anonymous access xdb http server.
now,
1. I can access 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' without input username / password for realm 'XDB' in IE6;
2. I can access 'http://localhost/apex/apex_admin' , 'http://192.168.88.175/apex/apex_admin' , and I can be redirected into apex administation page after input admin/<my apex admin password> for realm 'APEX' in IE6;
3. I can access 'http://chen_rong/apex/apex_admin' in IE6, but after input admin/password , I can not be redirected into administation page, because the cookie was blocked by IE6.
then, the first question is :
Q1: What is the difference among 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' ? I have already include site 'chen_rong' into my trusted stes! why the cookie was blocked by IE6. I have already tried firefox and google browser, both of them were ok for 'chen_rong', no cookie blocked from site 'chen_rong'!
and,
1. I have tried to use the script in attachment to test http authentication and also want to catch the cookie by utl_http .
2. please review the script for me.
3. I did:
SQL> exec show_url('http://localhost/apex/apex_admin/','ADMIN','Passw0rd');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm XDB for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
MS-Author-Via: DAV
DAV: 1,2,<http://www.oracle.com/xdb/webdav/props>
Server: Oracle XML DB/Oracle Database
WWW-Authenticate: Basic realm="XDB"
Date: Tue, 04 Aug 2009 02:25:15 GMT
Content-Type: text/html; charset=GBK
Content-Length: 147
======================================
PL/SQL procedure successfully completed
4. I also did :
SQL> exec show_url('http://localhost/apex/apex_admin/','ANONYMOUS','ANONYMOUS');
HTTP response status code: 500
HTTP response reason phrase: Internal Server Error
Check if the Web site is up.
PL/SQL procedure successfully completed
SQL> exec show_url('http://localhost/apex/apex_admin/','SYSTEM','apexsite');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm APEX for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
Content-Type: text/html
Content-Length: 147
WWW-Authenticate: Basic realm="APEX"
======================================
PL/SQL procedure successfully completed
my second questions is :
Q2: After I entered into realm 'XDB', I still need went into realm'APEX'. how could I change the script show_url to accomplish these two tasks and successfully get the cookie from site.
the show_url script is as following:
CREATE OR REPLACE PROCEDURE show_url
(url IN VARCHAR2,
username IN VARCHAR2 DEFAULT NULL,
password IN VARCHAR2 DEFAULT NULL)
AS
req UTL_HTTP.REQ;
resp UTL_HTTP.RESP;
name VARCHAR2(256);
value VARCHAR2(1024);
data VARCHAR2(255);
my_scheme VARCHAR2(256);
my_realm VARCHAR2(256);
my_proxy BOOLEAN;
cookies UTL_HTTP.COOKIE_TABLE;
secure VARCHAR2(1);
BEGIN
-- When going through a firewall, pass requests through this host.
-- Specify sites inside the firewall that don't need the proxy host.
-- UTL_HTTP.SET_PROXY('proxy.example.com', 'corp.example.com');
-- Ask UTL_HTTP not to raise an exception for 4xx and 5xx status codes,
-- rather than just returning the text of the error page.
UTL_HTTP.SET_RESPONSE_ERROR_CHECK(FALSE);
-- Begin retrieving this Web page.
req := UTL_HTTP.BEGIN_REQUEST(url);
-- Identify yourself.
-- Some sites serve special pages for particular browsers.
UTL_HTTP.SET_HEADER(req, 'User-Agent', 'Mozilla/4.0');
-- Specify user ID and password for pages that require them.
IF (username IS NOT NULL) THEN
UTL_HTTP.SET_AUTHENTICATION(req, username, password, 'Basic', false);
END IF;
-- Start receiving the HTML text.
resp := UTL_HTTP.GET_RESPONSE(req);
-- Show status codes and reason phrase of response.
DBMS_OUTPUT.PUT_LINE('HTTP response status code: ' || resp.status_code);
DBMS_OUTPUT.PUT_LINE
('HTTP response reason phrase: ' || resp.reason_phrase);
-- Look for client-side error and report it.
IF (resp.status_code >= 400) AND (resp.status_code <= 499) THEN
-- Detect whether page is password protected
-- and you didn't supply the right authorization.
IF (resp.status_code = UTL_HTTP.HTTP_UNAUTHORIZED) THEN
UTL_HTTP.GET_AUTHENTICATION(resp, my_scheme, my_realm, my_proxy);
IF (my_proxy) THEN
DBMS_OUTPUT.PUT_LINE('Web proxy server is protected.');
DBMS_OUTPUT.PUT('Please supply the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the proxy server.');
ELSE
DBMS_OUTPUT.PUT_LINE('Please supplied the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the Web page.');
DBMS_OUTPUT.PUT_LINE('Web page ' || url || ' is protected.');
END IF;
ELSE
DBMS_OUTPUT.PUT_LINE('Check the URL.');
END IF;
-- UTL_HTTP.END_RESPONSE(resp);
-- RETURN;
-- Look for server-side error and report it.
ELSIF (resp.status_code >= 500) AND (resp.status_code <= 599) THEN
DBMS_OUTPUT.PUT_LINE('Check if the Web site is up.');
UTL_HTTP.END_RESPONSE(resp);
RETURN;
END IF;
-- HTTP header lines contain information about cookies, character sets,
-- and other data that client and server can use to customize each
-- session.
FOR i IN 1..UTL_HTTP.GET_HEADER_COUNT(resp) LOOP
UTL_HTTP.GET_HEADER(resp, i, name, value);
DBMS_OUTPUT.PUT_LINE(name || ': ' || value);
END LOOP;
-- Read lines until none are left and an exception is raised.
--LOOP
-- UTL_HTTP.READ_LINE(resp, value);
-- DBMS_OUTPUT.PUT_LINE(value);
--END LOOP;
UTL_HTTP.GET_COOKIES(cookies);
dbms_output.put_line('======================================');
FOR i in 1..cookies.count LOOP
IF (cookies(i).secure) THEN
secure := 'Y';
ELSE
secure := 'N';
END IF;
-- INSERT INTO my_cookies
-- VALUES (my_session_id, cookies(i).name, cookies(i).value,
-- cookies(i).domain,
-- cookies(i).expire, cookies(i).path, secure, cookies(i).version);
dbms_output.put_line('site:'||url);
dbms_output.put_line('cookies:');
dbms_output.put_line('name:'||cookies(i).name);
dbms_output.put_line('value:'||cookies(i).value);
dbms_output.put_line('domain:'||cookies(i).domain);
dbms_output.put_line('expire:'||cookies(i).expire);
dbms_output.put_line('path:'||cookies(i).path);
dbms_output.put_line('secure:'||secure);
dbms_output.put_line('version:'||cookies(i).version);
END LOOP;
UTL_HTTP.END_RESPONSE(resp);
EXCEPTION
WHEN UTL_HTTP.END_OF_BODY THEN
UTL_HTTP.END_RESPONSE(resp);
END;
/

I use oracle database enterprise edtion 10.2.0.3. I have already figured out the epg on 10.2.0.3 to support apex 3.2.
And as I described above, the apex site works fine for ip address , and localhost. but the cookie will be blocked by IE6, if I want to access the site by 'http://computername:port/apex/apex_admin'. This problem does not occured in firefox and google browser. Could someone give me answer?

EBS 12.1.3: a few questions about cloning

Hi,
We have EBS 12.1.3 on AIX 7.1.
A few questions about cloning from shared application tier environment to non-shared application tier environment. We have been following "Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1]"
Source environment (shared app tier):
- Two active application nodes and LB
- One active database and one passive database setup with Oracle Data Guard.
- SSL termination at the load balancer
- PCP implemented
Target environment (non-shared app tier):
- One active application node
- One active database node
- No SSL
- No PCP
After the cloning was completed we noticed the following problems in the target system:
1) Home page cannot be accessed as application tier $CONTEXT_FILE still contains "https" and ssl termination settings.
Workaround:
Modify (with text editor) Application Tier $CONTEXT_FILE as follows.
<webentryurlprotocol oa_var="s_webentryurlprotocol" customized="yes">http</webentryurlprotocol>
<sslterminator oa_var="s_enable_sslterminator">#</sslterminator>
<login_page oa_var="s_login_page" customized="yes">http://myhost.mydomain.com:8000/OA_HTML/AppsLogin</login_page>
<externURL oa_var="s_external_url" customized="yes">http://myhost.mydomain.com:8000</externURL>
Run AutoConfig and start application tier.
Is there a better and supported solution for this?
2) Concurrent managers do not work correctly as they have still old node names (used in PCP in the source system). Workaround used:
1. Logon to EBS web GUI and remove all nodes from all concurrent managers.
2. Shutdown application tier. Verify that all concurrent managers have been shutdown. If not, kill the processes manually
3. As apps user run cmclean.sql
4. Restart application tier
Is there a better solution for this?
3) Database changes from ARCHIVELOG mode to nonarchivelog mode in the target system. Is there anyway to prevent this?
4) Also, we would like to perform a full clone (app + db tiers) from production without shutting down the application. Is this possible? What would be the best documents to describe this? In Production, we have Oracle Data Guard setup with physical standby as per "Oracle Tech Note: Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1]". This can be used when performing a hot clone for the database, right? What about the application tier? Steps described in 406982.1 include running AutoConfig in which application tier should be down. Does the application need to be down when running "Maintain Snapshot Information"?
5) One final question (not related to cloning). Oracle Enterprise Manager console webUI has recently stopped working in IE8. E.g. https://myhost.mydomain.com:5501/em gives "Page cannot be displayed". This was working correctly last week. In Firefox, the same link is working fine. Any ideas how to fix this?
Thanks for your answers in advance.
BR,
TH

1) Home page cannot be accessed as application tier $CONTEXT_FILE still contains "https" and ssl termination settings.
Workaround:
Modify (with text editor) Application Tier $CONTEXT_FILE as follows.
<webentryurlprotocol oa_var="s_webentryurlprotocol" customized="yes">http</webentryurlprotocol>
<sslterminator oa_var="s_enable_sslterminator">#</sslterminator>
<login_page oa_var="s_login_page" customized="yes">http://myhost.mydomain.com:8000/OA_HTML/AppsLogin</login_page>
<externURL oa_var="s_external_url" customized="yes">http://myhost.mydomain.com:8000</externURL>
Run AutoConfig and start application tier.
Is there a better and supported solution for this?No, you need to edit the context file manually and run AutoConfig.
2) Concurrent managers do not work correctly as they have still old node names (used in PCP in the source system). Workaround used:
1. Logon to EBS web GUI and remove all nodes from all concurrent managers.
2. Shutdown application tier. Verify that all concurrent managers have been shutdown. If not, kill the processes manually
3. As apps user run cmclean.sql
4. Restart application tier
Is there a better solution for this?You are following the best approach. You could update the node details from the backend if you want.
3) Database changes from ARCHIVELOG mode to nonarchivelog mode in the target system. Is there anyway to prevent this?By default, Rapid Clone will create the target database in noarchivelog mode.
4) Also, we would like to perform a full clone (app + db tiers) from production without shutting down the application. Is this possible? What would be the best documents to describe this? In Production, we have Oracle Data Guard setup with physical standby as per "Oracle Tech Note: Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1]". This can be used when performing a hot clone for the database, right? Correct.
What about the application tier? Steps described in 406982.1 include running AutoConfig in which application tier should be down. Does the application need to be down when running "Maintain Snapshot Information"?You can copy the application tier node files while the application is up. And, you do not need to shutdown the application to run "Maintain Snapshot Information".
5) One final question (not related to cloning). Oracle Enterprise Manager console webUI has recently stopped working in IE8. E.g. https://myhost.mydomain.com:5501/em gives "Page cannot be displayed". This was working correctly last week. In Firefox, the same link is working fine. Any ideas how to fix this?
If it is working from one browser, then it should not be an EM issue. Have you tried from a different client and see if this works? Have you changed any setting in your IE browser? Please make sure you add the EM URL to the trusted sites list.
Thanks,
Hussein

STS: Few Questions about STS ?

Hi All,
Right now, I'm working on STS for IP.
I have some questions about it:
1. Every time I execute t-code BPS_STS_START, it launch the STS Web Application with different port and HTTP.
The port should be 8444, and HTTP should be HTTPS .
I've already checked on t-code: SE80 to TUNGUSKA htm, and see on the properties on it. I got it has correct port and HTTPS.
How do I fix up this problem ? Do you know what the solution is ?
2. When I execute sending email initially, why does it always send the email to manager ?
Whereas It doesn't have the upper level.
How can I setup it? Is it setup with the Authorization ?
Thanks a lot all . Appreciate your suggestion about my questions.
Best regards,
Daniel N.

Hi Lucimar,
Thanks a lot for your kind help.
If you don't mind, I have another questions.
When I run t-code: BPS_STS_START. It will launch the browser with this url: https://sapdsb6.xxx.yyy.com:8606/sap/public/myssocntl?sap-client=100
But it just gives me blank web-page.
My question is whether it's normal behavior from STS ? I thought it will distribute email notification to start planning, but it's not, when I check on t-code: SOSV, it doesn't give any email queue to be distributed.
2.
Btw, regarding my question no. 2, how can I setup it in t-code: BPS_TC at Determine date, Person Resp., Layouts ? Where can I setup it ?
Would you kindly help me what I have to do ?
Thanks a lot and have a good day,
Best regards,
Daniel N.

Some random questions about integration features

Greetings,
after working for a few weeks with Autovue's ISDK (web server) and having some sucess with its integration with our custom CMS, I have a few random questions about what can be done and what can't be done. So, instead of opening many new threads, I'll post them here together.
1) Translation. We are localised in Russia, and its translation is incomplete. I have found a tra_en.properties file in AutoVue/bin, and a description about how to create a properties file for custom actions. But no information about how to translate to other languages - and russian translation appears to be packed within the jar of the applet. Is there a clean way to translate, or refine the current translation, so we don't get a mix of russian and english commands in the applet? Because my tries using EXTRABUNDLES have failed, as I don't want to add a bundle for extra actions, but to replace it for existing ones.
2) Attachments in markups. Markups allow to attach other files, but since our CMS is custom, we only get the option to attach files from our local drives. We did no browse integration with the CMS, as people with different levels of permission will have different access to files there, and we considered unnecessary to provide that level of integration. We are considering to remove this action from the GUI, but before that I'd like to evaluate how hard would it be to generate an upload file action, so the attached file would be stored in the custom CMS and linked to it so the whole thing worked. My guess is "it will be hard and time consuming", so for now, we are considering to delete this feature in our integration.
3) Is there a way to resize the Open markup dialog? We have several properties displayed, and fit well within a standard screen, but the dialog is small and you have to scroll the table to see all properties.
Thanks for any assistance with these issues

As always, thanks for the fast answer, Artash.
Yes, now I see attachments are stored inside the markup file. The problem is, when I open markup mode for the attachment, since the attachment uses some kind of default access method, my url's from the integration with the background CMS are broken completely. I believe the ideal state here would be to make some kind of inner markup for the attachment, maybe stored within the original markup file along the attached file. Or maybe it works that way, and I need to access it with the default gui action instead of my custom one. If that is the case, is there any way to tell the gui file how to differentiate a standard opened file from an attached one? If so, the issue has solution. If not... Well, then maybe something escapes me.
Edited by: Jordi Bosch on Apr 6, 2012 12:27 AM

Newbie question about loading servlets on tomcat

I have what is probably a very basic question about loading simple servlets on to tomcat to test its installation. I have followed instructions from numerous tutorials to the letter but still I can't get it to work.
I have installed tomcat on win2k in c:\tomcat. I set up the jdk, environment vars (JAVA_HOME, CATALINA_HOME, TOMCAT_HOME) which all point at the correct dirs. I can compile a servlet without errors. I can also place a test jsp and html file into the root directory and they both work fine.
However, now I am trying a test servlet and no matter what I do it gives me a 404. I have a servlet class file called "HelloServlet.class" which I placed into the %install_dir%\webapps\ROOT\WEB-INF\classes directory. I try to reference it using this url:
http://localhost/servlet/HelloServlet
Tomcat is configured to use port 80 and has been restarted after adding the servlet class file. Does anyone have a clue why this is not working for me?
Many thanks
Marc

You have to add in the web.xml file that it is in the WEB-INF dir, the information about your servlet. An example:
<web-app>
<servlet>
<servlet-name>HelloServlet</servlet-name>
<servlet-class>HelloServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>HelloServlet</servlet-name>
<url-pattern>/HelloServlet</url-pattern>
</servlet-mapping>
</web-app>

Question about autodiscover in case of multiple bound namespace

Hi Experts,
I have a question about the autodiscover behaviour. Let's assume we have the below infrastructure:
SiteA :
MBX-Server-SiteA : Member of a DAG
CAS-Server-SiteA : outlook anywhere url = siteA.domain.com
SiteB :
MBX-Server-SiteB : Member of a DAG
CAS-Server-SiteB-1 : outlook anywhere url = siteB-1.domain.com
CAS-Server-SiteB-2: outlook anywhere url = siteB-2.domain.com
We have DB-1 and DB-2 that have copies in both MBX servers.
My question is how does exchange select the access URLs to return in the autodiscover process? I know that it depends on where the mailbox is hosted but can't find details about the process in the technet articles.
Thanks.

There's quite a few details that are involved in the Autodiscover process. First of all - probably the most important thing is that there are 2 stages to the whole process.
In the first stage, the client is simply concerned with getting the address of a CAS server that will help it further. We'll keep things simple and assume your scenario where the client is located inside the network and is domain-joined. The details of the
LDAP query are detailed in
this link. (At the time I was investigating this I've actually went ahead and ran the queries using the ldp.exe client against the Configuration partition of the respective AD domain - it's worth seeing the actual responses.) An interesting trick here is
the 'keywords' attribute that's stamped on those SCP entries. The reason behind it is that you don't want a client located in a site to go half across the globe in order to connect to a CAS server, when there's one available in its own site. One simple way
to get the 'keywords' attribute stamped is through the Set-ClientAccessServer cmdlet, using the -AutodiscoverSiteScope parameter. In your example, you'd probably want to run it against the CAS server in Site A and specify the name of the corresponding AD site
('SiteA') and correspondingly against the 2 CAS servers in Site B (using 'SiteB'). Once the client has got the response to his query, it will attempt to select one server that's handling the site he's in (essentially it will filter the results based on 'keywords'
-contains <client-site>). Now that we got our endpoint we can go to stage 2.
In stage 2, the client will actually use EWS in order to query the Autodiscover service itself running on our target server. There are 2 possible interfaces of accessing the Autodiscover service: POX (Plain Old XML) and SOAP. POX will be targeting the ../Autodiscover.xml
URLS, while the SOAP one will be using ../Autodiscover.svc URLs. Details about this including some hardcoded parts are
here. What happens next is detailed in point 3, section 2.1 The Autodiscover Process
here. This last link is the key to the whole process:
"It provides a list of CAS that has AutodiscoverSiteScope information set for the
Associated AD site of the Database where the client Mailbox is located."
In other words, the CAS is smart enough to return the URLs belonging to a CAS server in the AD site where the client's mailbox' database is active.
My advice is to test this on your scenario. Tests can be done here first-hand: the Outlook's tray icon Test E-Mail AutoConfiguration can be used or alternatively - if you want to see the details in the communication - SoapUI
for the SOAP access method, for POX there's an extension called 'Postman for Chrome' that can be used. I've used all these in my tests back when I was fighting conflicting results from the articles around the web about Autodiscover.
That's a long way of saying we get the AutoD URL of a CAS server closest to the workstation, which then provides the configuration to use which are the the URLs closest to the mailbox :)
By all means look at the SOAP response, but Outlook will only use POX. Lync does SOAP along with other 3rd party apps.
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

A french question about a login

Et voilà,
WindowsUserName : TextData;
WindowsUserName = task.part.OperatingSystem.GetEnv(name='username');
Hope this helps
Fabrizio Genesio
Datasign AG für Informatik
ch. d'Eysins 53a
CH-1260 Nyon
Switzerland
Tel.: +41 22 361 04 04
Fax: +41 22 361 01 10
e-mail: fabrizio.genesiodatasign.ch
<mailto:fabrizio.genesiodatasign.ch>
URL: www.datasign.ch <http://www.datasign.ch>
-----Original Message-----
From: Olivier Andrieux [SMTP:oandrieuxaxialog.fr]
Sent: Thursday, 27 April 2000 11:53
To: Mailing Liste Forte
Subject: (forte-users) a french question about a login
Bonjour,
J'ai une petite question à vous soumettre:
Je voudrais réaliser une fenêtre de login avec Forté, mais pour
cela il me faudrait récupérer les informations
d'identification de chaque utilisateur sur le serveur
NT. Questionner le serveur en utilisant les mêmes noms et mots de passe
utilisateurs que le serveur.
Cela est-il possible ?
Je vous remercie par avance pour vos réponse .
A bientôt
Olivier.
Olivier Andrieux
Axialog Lille
France

Questions about Digital Wireless Headphones CB2

Hi everyone,
I have a question about the [url="http://nl.europe.creative.com/products/product.asp?category=437&subcategory=438&product=6 44" target=_self>Digital Wireless Headphones CB2530[/url] I've never seen it in a shop here in Holland, so I thought I'll pose my questions here.
I'm interested in buying one for my Creative Zen Xtra MP3 player.
My questions are:
- if it's possible to connect it to the player?
- can I use it while traveling (can i hear something if I put the player in my bag)?
- is it a good idea to buy this headphone? (i already have a great headphone by Philips, but am looking for wireless)
I also have a question concerning a remote control. Is there one for the Creative Zen Xtra?
I hope so...
Thanks in advance.
Greetings,
Eline

Eline,
Yes, you can connect the wireless headphone to the player. Infact you can connect it to any stereo devices with the audio transmitter as long it's using a 3.5mm minijack. It shouldn't be a problem for the audio even if the player is inside the bag. It works about the same way as a mobilephone to a Bluetooth headset. Unfortunately, the Zen Xtra player does not support remote control feature.
Jason

Question about URL

Similar Messages

Maybe you are looking for