Question about using numbers for an address spread sheet

I am using numbers for a mailing address spread sheet. When I try to type in a Massachusetts zip code, once I hit "enter" the cell deletes the zero, which is the first number in the zip code. How can I change this? Thank you

to open the cell inspector use the menu item "View > Show Inspector" then select the "cells":

Similar Messages

Design question about using DHCP for an SSID

I've got an SSID that I would like to send out to a public subnet (wifi for guests in the building) but because it's public i don't want to waste a lot of addresses. So i'm considering a DMZ-type area for the clients to get a RFC1918 address with a single address on the outside.
Something like this:
Clients -> WLC4402 -> 10.x.x.xpool -> ??? -> Public subnet
I know the WLC can dish out my 10.x.x.x subnet to the clients. But my question is the ??? between that and a single IP address and the Public subnet.
The WLC can't handle that part can it?
Obviously i could just use a simple linksys router or something to handle that and the ip address pool, but i was hoping there was something in the WLC that can handle it all for me.
Ideas? Suggestions?
Thanks in Advance!

I guess you are looking for the NAT on the WLC.. this feature is not der on WLC yet.. the WLC acts as a perfect layer 2 device.. this is done only on the layer 3 device currently..
let me know if this answers your question!!
Regards
Surendra

Question about using onyx for maintenance.....

after using this app to maintain, clean up, and clear cahes, log files etc, the applications used to open certain files as default was changed and as a result so were their icons...
when i restarted my mac i noticed that some of my files (mainly .doc) where given the default icon picture instead of the microsoft word icon and i had to re set them all to open as default with microsoft word
i know this is a result of something ive done in onyx but am unsure which
any help apprecited, thanks

Onyx is third-party software. If you need support or questions answered regarding its use you should contact the developer via his/her web site. These Discussions only provide support for Apple products.

Question about using plans for more than one device

I have a Verizon wireless broad band modem I currently use in conjunction for my lap top. I am looking at getting a cell phone soon and I am curious if I can use that plan, that is currently attached to the modem, with this hypothetical cellphone as well, or if I would need get separate plans for both devices.

If you want to keep your data from being merged, you will need to have separate iCloud accounts with separate IDs. You can still track your devices using Find My iPhone, you will just need to be signed into the iCloud account for the device you are trying to track. You can also continue to share the same ID for iTunes purchasing; it does not need to be the same as the ID used for iCloud.
In order to migrate your daughter to her own account, on her phone go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from her phone, not from iCloud. Your devices will not be effected by this.) When prompted about what to do with the iCloud data, choose Keep On My iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload her data to the new account.
You can then go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want from each account (such as deleting your daughter's contacts from your account, and vice versa).

Questions about Using Itunes for Nano. New User

Hi everyone! i am a new ipod user that is new to the itunes software. I have a few questions regarding making playlists and transferring them into the ipod nano and deleting songs from the ipod nano thru itunes or the device. Can someone provide a link or a detail procedure? i've tried already and i can't figure it out. Thank you!

If I understand what it is you want to accomplish correctly, you can do this if you turn off automatic synchronization. Connect your iPod and click the iPod Options button at the bottom of iTunes. Click the Music button and select "Manually manage songs and playlists." You can then delete specific tracks and playlists directly from the iPod, In addition, iTunes will then not automatically remove the tracks from the iPod if you delete them from iTunes. Note that you'll have to drag songs from your library or playlist to iPod in the Source list to add new tracks.
For further information, please see page 22 of your iPod nano manual.
Hope this answers the question.

A question about Using RSL for our Intranet Application

Hi ,
I am doing an Intranet Application (Which will be used only with in the Employees of the Organization)
We want to RSL as read that it will improve the performance of the swf files .
Please let us know what type of RSL (like Standard RSLs , Cross-domain RSLs or Framework RSL)
Suppourt us ??
Can anybody let me know how can i provide RSL facility for my Application .
Thanks in advnace .

Thanks for the information .
As you mentioned:
RSLs are only useful if more than one SWF is going to share it.
Our Intranet Application is divided into several Modules , but under only one APPlication MMXL file . So will this be useful for us in any way ??
Thanks .
Waiitng for your resposne .

Please enter at most 70 letters or numbers for street address, i am facing this issue with that i am unable to downloads few apps, as it is asking for this question and again and again,

please enter at most 70 letters or numbers for street address, i am facing this issue with that i am unable to downloads few apps, as it is asking for this question and again and again,
i tried all letters and address more 100 hundred also nut no of use,

please enter at most 70 letters or numbers for street address, i am facing this issue with that i am unable to downloads few apps, as it is asking for this question and again and again,
i tried all letters and address more 100 hundred also nut no of use,

Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

Make sure that your bean is implementing the serializable interface and that
you are accessing the bean from the session with the same name.
Bryan
"Sandeep Suri" <[email protected]> wrote in message
news:[email protected]..
Hi, I have quick question about use of USEBEAN tag in SP2. When I
specify a scope of SESSION for the java bean, it does not keep the
values that I set for variable in the bean persistent.Thanks,Sonny
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

Using numbers for roster information. Imported from another program. Now seem to have extra headers, one listing name, address, etc.

Using numbers for roster information. Imported from another program. Now seem to have extra headers, one listing name, address, etc. & another A, B, C. They don't mesh & can't get rid of either. All info there, but can't change width of columns.

I think my problem is that I have inadvertently created three tables (I only want one). I have included a screen shot of the light grey line under B and the words Table 1 behind it.

I have a question about using multiple ipads in our school. Each of our teachers have a iPad and AppleTV in their classroom. The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher

I have a question about using multiple ipads in our school. Each of our teachers have a iPad and AppleTV in their classroom. The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher #1 iPad to its AppleTV without effecting/projecting onto the adjacent teachers #2 classroom AppleTV?

Not as such.
Give the AppleTV units unique names and also enable Airplay password in settings with unique passwords for each teacher.
AC

Question about using new battery in old Powerbook

I have a pre-intel Powerbook G4, and the battery is pretty much toast (lasts about 15 minutes now). I have ordered a new battery for it, and I have this question about using it:
Am I smarter to keep the new strong battery out of the PB most days (as I usually work with it plugged in at home) and just pop it in when I know I will be out surfing on batteries? Or is it just as good living in my laptop 24/7 and only occasionally being called upon to do its job?
Current bad Battery Information below:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 1144
Remaining Capacity (mAh): 1115
Amperage (mA): 0
Voltage (mV): 12387
Cycle Count: 281
thanks folks, Shereen

Hi, Shereen. Every Powerbook battery wants to be used — drained and then recharged — at least every couple of weeks. If you've always used your Powerbook on AC power nearly all the time, and not followed that pattern of discharging and recharging the battery every week or two, it's possible that your use habits have shortened the lifespan and prematurely diminished the capacity of your old battery. Of course it's also possible that your battery is merely old, as a battery's capacity also diminishes with age regardless of how it's used. You didn't say how old the battery is in years, so this may or may not be an issue. I mention it only because it can be an issue.
For general information on handling a battery for the longest possible lifespan, see this article. My advice on the basis of that article and long experience reading these forums is that it would be OK to do as you propose, but I doubt that you'd derive any significant benefit from it. You would still want to be sure of putting the new battery through a charge/discharge cycle every week or two, even if you didn't have a reason to use the Powerbook away from home or your desk, because sitting unused outside the computer is just as bad for a battery as sitting unused inside it. And you should never remove the battery from your computer when it's completely or almost completely discharged and let it sit that way any longer than a day or two.
Message was edited by: eww

Question about using TVARV in an ABAP program

Hello gurus, Im sorry about the silly question.
I have a question about using TVARV in an ABAP program.
A program is presenting a problem and I think that in this code:
SELECT SIGN OPTI LOW HIGH
FROM TVARV
INTO TABLE R_1_163431035_VELOCIDADE
WHERE NAME = '1_163431035_VELOCIDADE'
AND    TYPE = 'S'.
IF ZMM001-VELOCIDADE_B   IN R_1_163431035_VELOCIDADE AND
      ZOPERADORAS-OPERADORA = 'ABCD' AND
      ZMM001-MATERIAL       IN R_1_163431035_PRODUTO.
ELSE.
ENDIF.
What happens is that the value "ZMM001-SPEED" B not exist in "R1_163431035_VELOCIDADE" but the program executes commands under the IF and not under the ELSE, as I imagine it would work. Is this correct ?
I am new to ABAP programming, but I have a lot of XP in other programming languages and this makes no sense to me.
Anyone know where I can find some documentation of the use of "TVARV" in ABAP programs?
I search the Internet if other programmers use TVARV this way, but found nothing, which leads me to think that was a quick and dirty solution that used here.
If this is a bad way to program, what would be the best way?
Regards
Ronaldo.

Hi Ronaldo,
But in this case, the range is not empty, there are 17 records, in this way.:
For the column "SING" all values are "E"
It means that the result is false if ZMM001-VELOCIDADE_B has the same value as one of the 17 records (E = exclude).
For instance, if it has value 'C' and one of 17 records matches C, then the result is false.
The "IF" with "IN" using "TVARV" as used in the program of the post above has the same behavior of a selection screen?
Yes, the same behavior as the selection criterion to be exact. You can press the help key in the complex selection dialog for more info.
I know it's a silly and very basic question, but other language that I used, only the SQL has the "IN" operator, but I think they work in different ways, so I would like to understand how it works in ABAP.
Not silly ;-). Yes they work differently.
More info here:
- http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba74635c111d1829f0000e829fbfe/frameset.htm
- http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba71f35c111d1829f0000e829fbfe/frameset.htm
BR
Sandra

Question about using Macbook in Vietnam.

I have a question about using Macbook in Vietnam. I bought my mac here in the US, and I'm going to visit Vietnam, but I'm wondering if I can plug in the power directly into the wall or I have to need any convert power modem for my mac. The only thing I know that Vietnam use 220V so, can anyone help me?

You may need a plug adaptor, but you don't need a power converter.
(43828)

Questions about use of InfoObjects

Hi,
I am generating profiles uisng the ODSs, and i have a question about the mapping:
For IO 0TCTNIOBJNM, I am mapping it to 0HIER_NODE for text node .
What should these be mapped to? What are these supposed to be?
0TCTIOBJNM
0TCTNODE
Thanks
Will

Thanks so much for the reply.
Before I posted my code, I double-checked my syntax and think I found the problem. I using Fragments at the beginning of my page, and at the end, to construct a wrapper table where I can put some fancier graphics, etc. I'm using the fragments and plain old HTML because using another gridpanel on each page is a bit cumbersome, and also I need the flexibility of possibly doing some dynamic things to this table... Because each fragment doesn't have matching tags to complete the page, I think that's screwing up the designer, as you suggested. For instance, here is my fragment at the top of each page :
<TABLE WIDTH="100%" BORDER="1">
<TR>
<TD ALIGN="CENTER" VALIGN="TOP">
<TABLE WIDTH="595" BORDER="2" CELLSPACING="0" CELLPADDING="0" BORDERCOLOR="#184266">
<TR>
<TD WIDTH="50%" ALIGN="LEFT" BGCOLOR="#184266"> </TD>
<TD WIDTH="50%" ALIGN="RIGHT" BGCOLOR="#184266"> </TD>
</TR>
<TR>
<TD COLSPAN="2" ALIGN="CENTER" VALIGN="TOP">

Any suggestions on a better way to use includes to break out some necessary HTML??
THANKS very much!
Tom

Where Would be the best category to ask a question about using dashboard?

Where Would be the best category to ask a question about using dashboard?

However, don't ask it in this topic. Create a new topic for the question with a title describing that you are looking for Dashboard help.

Question about using numbers for an address spread sheet

Similar Messages

Maybe you are looking for