Question about using Switches in different Software Layers

Hi all,
I have the following problem : I have Switch A and Business Function A in Software Layer 1, and Switch B and Business Function B in Software Layer 2(which is higher than Software Layer 1). Is it possible to assign both switches(A and B)  to the Business Function B and switch them both on?Or is it possible to set the Business Function A as a prerequisite of the Business Function B?
Thanks,
Sukru

Hi
   Please check this link
http://help.sap.com/SAPHELP_NW04S/helpdata/EN/43/b494429d7c0631e10000000a1550b0/frameset.htm

Similar Messages

  • Question about using TVARV in an ABAP program

    Hello gurus, Im sorry about the silly question.
    I have a question about using TVARV in an ABAP program.
    A program is presenting a problem and I think that in this code:
    SELECT SIGN OPTI LOW HIGH
      FROM TVARV
      INTO TABLE R_1_163431035_VELOCIDADE
      WHERE  NAME = '1_163431035_VELOCIDADE'
      AND    TYPE = 'S'.
      IF ZMM001-VELOCIDADE_B   IN R_1_163431035_VELOCIDADE AND
          ZOPERADORAS-OPERADORA = 'ABCD' AND
          ZMM001-MATERIAL       IN R_1_163431035_PRODUTO.
      ELSE.
      ENDIF.
    What happens is that the value "ZMM001-SPEED" B not exist in "R1_163431035_VELOCIDADE" but the program executes commands under the IF and not under the ELSE, as I imagine it would work. Is this correct ?
    I am new to ABAP programming, but I have a lot of XP in other programming languages ​​and this makes no sense to me.
    Anyone know where I can find some documentation of the use of "TVARV" in ABAP programs?
    I search the Internet if other programmers use TVARV this way, but found nothing, which leads me to think that was a quick and dirty solution that used here.
    If this is a bad way to program, what would be the best way?
    Regards
    Ronaldo.

    Hi Ronaldo,
    But in this case, the range is not empty, there are 17 records, in this way.:
    For the column "SING" all values ​​are "E"
    It means that the result is false if ZMM001-VELOCIDADE_B has the same value as one of the 17 records (E = exclude).
    For instance, if it has value 'C' and one of 17 records matches C, then the result is false.
    The "IF" with "IN" using "TVARV" as used in the program of the post above has the same behavior of a selection screen?
    Yes, the same behavior as the selection criterion to be exact. You can press the help key in the complex selection dialog for more info.
    I know it's a silly and very basic question, but other language that I used, only the SQL has the "IN" operator, but I think they work in different ways, so I would like to understand how it works in ABAP.
    Not silly ;-). Yes they work differently.
    More info here:
    - http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba74635c111d1829f0000e829fbfe/frameset.htm
    - http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba71f35c111d1829f0000e829fbfe/frameset.htm
    BR
    Sandra

  • I have a question about using multiple ipads in our school.  Each of our teachers have a iPad and AppleTV in their classroom.  The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher

    I have a question about using multiple ipads in our school.  Each of our teachers have a iPad and AppleTV in their classroom.  The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher #1 iPad to its AppleTV without effecting/projecting onto the adjacent teachers #2 classroom AppleTV?

    Not as such.
    Give the AppleTV units unique names and also enable Airplay password in settings with unique passwords for each teacher.
    AC

  • Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

     

    Make sure that your bean is implementing the serializable interface and that
    you are accessing the bean from the session with the same name.
    Bryan
    "Sandeep Suri" <[email protected]> wrote in message
    news:[email protected]..
    Hi, I have quick question about use of USEBEAN tag in SP2. When I
    specify a scope of SESSION for the java bean, it does not keep the
    values that I set for variable in the bean persistent.Thanks,Sonny
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • Question about using new battery in old Powerbook

    I have a pre-intel Powerbook G4, and the battery is pretty much toast (lasts about 15 minutes now). I have ordered a new battery for it, and I have this question about using it:
    Am I smarter to keep the new strong battery out of the PB most days (as I usually work with it plugged in at home) and just pop it in when I know I will be out surfing on batteries? Or is it just as good living in my laptop 24/7 and only occasionally being called upon to do its job?
    Current bad Battery Information below:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 1144
    Remaining Capacity (mAh): 1115
    Amperage (mA): 0
    Voltage (mV): 12387
    Cycle Count: 281
    thanks folks, Shereen

    Hi, Shereen. Every Powerbook battery wants to be used — drained and then recharged — at least every couple of weeks. If you've always used your Powerbook on AC power nearly all the time, and not followed that pattern of discharging and recharging the battery every week or two, it's possible that your use habits have shortened the lifespan and prematurely diminished the capacity of your old battery. Of course it's also possible that your battery is merely old, as a battery's capacity also diminishes with age regardless of how it's used. You didn't say how old the battery is in years, so this may or may not be an issue. I mention it only because it can be an issue.
    For general information on handling a battery for the longest possible lifespan, see this article. My advice on the basis of that article and long experience reading these forums is that it would be OK to do as you propose, but I doubt that you'd derive any significant benefit from it. You would still want to be sure of putting the new battery through a charge/discharge cycle every week or two, even if you didn't have a reason to use the Powerbook away from home or your desk, because sitting unused outside the computer is just as bad for a battery as sitting unused inside it. And you should never remove the battery from your computer when it's completely or almost completely discharged and let it sit that way any longer than a day or two.
    Message was edited by: eww

  • Question about using Macbook in Vietnam.

    I have a question about using Macbook in Vietnam. I bought my mac here in the US, and I'm going to visit Vietnam, but I'm wondering if I can plug in the power directly into the wall or I have to need any convert power modem for my mac. The only thing I know that Vietnam use 220V so, can anyone help me?

    You may need a plug adaptor, but you don't need a power converter.
    (43828)

  • I have a question about using adobe CS files in CS6 edition

    I am a graphic artist . I have a question about using adobe CS files in CS6 edition. when I am gonna open thse adobe CS created files in CS6 Edition i get a color variation than i made with the CS version.Please give me an idea about this issue as soon as possible.If you need i can upload my problem as a screenshot to clearity

    donrulz,
    Are your Edit>Color Settings the same?
    Are you using spot colours, such as Pantone (there have been some changes in CMYK values with new colour books)?

  • Where Would be the best category to ask a question about using dashboard?

    Where Would be the best category to ask a question about using dashboard?

    However, don't ask it in this topic. Create a new topic for the question with a title describing that you are looking for Dashboard help.

  • Question about Using PAPI Web Service in PowerBuilder 9

    Hi, all.
    I Have a simple question about using papiws in power builder 9.
    In pb9, I created a new Web Service Proxy Wizard and I input a url for papiws(ex. http://seraphpernote:7001/papiws/PapiWebService) and click next.
    But I couldn't get any Service List.
    In Eclipse, I used this url for using papiws well.
    Does anybody know about this case??
    help me plz.

    IIRC you must activate PAPI-WS for the engine. In Studio you do it by right-clicking on the project, then "engine preferences". In enterprise/standalone you must activate PAPI-WS in the Admin Center.

  • Question about using 10g/11g and APEX ...

    Hi,
    I just recently learned of Oracle's APEX and have a few questions about using it.
    Can I use APEX with express, standard, and enterprise editions of 10g and 11g?
    Are all of these free to use?

    You might want to read about APEX rather than jumping into questions that are reasonably well documented. Info at http://www.oracle.com/technology/products/database/application_express/index.html
    Your specific questions:
    1) Apex is a package that can be installed into any properly licensed database.
    2) The price for the production license of the database varies by edition.
    The price for Express Edition is $0 for use in production. Part of the cost for that edition is 'no Oracle Support based support, no patches, data volume limitation, etc.'

  • Question about using Runtime.getRuntime();

    hi all
    i have a question about using Runtime.getRuntime(). if i use this to get a runtime reference to run an external program, is it considered as starting a new thread inside the thread that starts it?
    is it safe to do it in the Session EJB? if not, what can you recommand to do it? thanks

    hi all
    i have a question about using Runtime.getRuntime().
    if i use this to get a runtime reference to run an
    external program, is it considered as starting a new
    thread inside the thread that starts it? No. Starting a process, starts a process. Threads have nothing to do with it.
    is it safe to do it in the Session EJB? if not, what
    can you recommand to do it? thanksSo what? Run another process? If you want to run another process in java then your choices are to use Runtime.exec() or use JNI. And using JNI will probably end up doing exactly the same thing as Runtime.exec().
    "Safe" is harder. Typically to correctly use Runtime.exec() you must use threads. And as noted threads ideally should not be used. You can use them but if you do you had better understand why they didn't want you using them in the first place. You had also better be sure that you really want to wait for it to complete.
    Other than that Runtime.exec() is safe because it can't crash the VM like other interfaces can (like JNI.)

  • ITunes Connect: bundle identifier is already in use by a different software

    Dear fellow developers,
    Has anyone ever encountered an error like this when trying to upload an update for your app via iTunes Connect:
    "The binary you uploaded was invalid. The bundle identifier is already in use by a different software package."
    I am 100% sure no one else is using the same bundle identifier. I am still using the same App ID and a non-wild-card bundle identifier I used when first submitting. The only difference is that this binary was compiled using the most recent final SDK.
    Any suggestions? I am really stuck...
    Eugene

    Fixed. Using Application Loader

  • Question about using multiple iPods on the same PC

    I've read the FAQs on this subject but I still have a couple of questions about multiple users with separate iPods using the same PC.
    I want to use my family's desktop (A new Gateway with Vista, if it matters) for my new iPod Classic, but my father already has an iTunes account on there for his iPod. I know I can create a new user account on the PC and move iTunes to a shared folder so that we can share music, but will this second account be able to purchase music from the iTunes store or am I going to have to switch between Windows User accounts to make purchases and then move new songs into my separate iTunes account via the shared folder? Will it be its own separate iTunes account (separate user name, separate credit card used, etc.) or will it just be a second library that's dependant on the first?
    I want to be able to have my own iTunes account, make my own purchases in it, and maybe occasionally share tv shows or something with my father.
    If this can't be done, would I be better off just creating new playlists for our two iPods from the same library, or creating a second library on my Father's account?
    Also, if I want to access things I've purchased from iTunes on this desktop in iTunes on my notebook, will I be able to?
    I hope that made sense.
    Sorry if these seem like silly questions. This will be my first iPod as I'm really excited about the 160gig and want to know if these things are possible.
    Thanks in advance for any help

    Hi, Wes.
    Congratulations on your new iPod Classic and Welcome to the Apple Discussions.
    For no particular reason, let's answer your last question first ...
    ... if I want to access things I've purchased from iTunes on this desktop in iTunes on my notebook, will I be able to?
    The iTunes Store operates on a one download per purchase policy so you will have to copy the purchases from one computer to the other and make sure that you authorize the laptop to play the songs.
    As to your first question ...
    ... will this second account be able to purchase music from the iTunes store or am I going to have to switch between Windows User accounts to make purchases ...
    Whatever XP User Account you are logged in to doesn't really matter. What's important is which Apple Account you sign in to ... yours or your Dad's or - if you had my Apple ID and password - The Mimico Kid's for that matter. You can sign in to any Apple Account on any XP User Account. Or any computer for that matter.
    Where the XP User Account comes into play is that it will determine where on your computer the purchases are downloaded. Files will be sent to the iTunes Music folder as specified in the iTunes Edit menu > Preferences > Advanced tab > General sub-tab. Default settings will have a different location for each User Account - C:\Documents and Settings\ user name \My Documents\My Music\iTunes - but if you've read this article in the Apple Knowledge Base, you will know you can change the location of the iTunes Music folder in each XP Account to a common location such as C:\Documents and Settings\All Users\Documents\My Music\iTunes.
    Post back if all this hasn't been as clear as mud and you need anything clarified.

  • Question about using blending modes when cloning

    Hi I want to clone on a blank layer above the background layer. I have the tool set to curent and below and the blank layer is set to normal blending mode.  I want the cloning to be in darken blending mode. I change the blending mode of the clone stamp tool to darken. Will that work on a blank layer that is set to normal or is it necessary to also change the blending mode for the blank layer to darken as well? Thanks for your help.

    Well thanks. It's not just a portion of the image that I want to clone on using different blend modes, but the entire image. I didn't want to duplicate the background to clone on as it adds a lot in size to the image and its harder to edit out incase I make a mistake. Guess I will have to have two layers, one set to lighten and one to darken. I wish that Adobe would make photoshop work in the next version so that you could just change the blending mode of the clone stamp tool in the tool bar. Wasn't it like this in versions before CS5?
    So I have another question for you. Can I use the healing brush on lighten and darken blending modes on a blank layer set to normal with sample current and below selected? Or do I have to switch between two separate layers, one set to lighten, one set to darken?
    Thanks again.

  • Questions about Using APIs to import Bills and Routings - AND COSTS

    Hi Forum - the following is a back-and-forth with a customer about use of APIs - Inventory developer suggested I post the question here. Note the 2nd question - and thanks for any assistance.
    SR# 7332152.994 ALCOA
    Instructions given to ct:
    Q1 - Can I load the bill header and components at the same time?
    You should be able to load the bill header and components at the same time. Customer loads bill and component data inserting enough "other" data for each so that the bill sequence id will be derived. For the component record, the assembly item, org and alternate_bom_designator values will be used by BMCOIN to derive the bill_sequence_id.
    Example:
    INSERT INTO BOM_BILL_OF_MTLS_INTERFACE
    ORGANIZATION_CODE,
    ITEM_NUMBER,
    ALTERNATE_BOM_DESIGNATOR,
    PROCESS_FLAG,
    TRANSACTION_TYPE
    VALUES
    'M1',
    '&PARENT_ITEM',
    NULL,
    '1',
    'CREATE'
    INSERT INTO BOM_INVENTORY_COMPS_INTERFACE b
    ORGANIZATION_CODE,
    ASSEMBLY_ITEM_NUMBER,
    ALTERNATE_BOM_DESIGNATOR,
    COMPONENT_ITEM_NUMBER,
    OPERATION_SEQ_NUM,
    COMPONENT_QUANTITY,
    EFFECTIVITY_DATE,
    PROCESS_FLAG,
    TRANSACTION_TYPE
    VALUES
    'M1',
    '&PARENT_ITEM',
    NULL,
    '&COMPONENT_ITEM',
    1,
    1,
    trunc(SYSDATE),
    1,
    'CREATE'
    Hi Aruna, some additional information that may be useful:
    We can load/create the bill header and components at the same time using the scripts given (as above)
    Required Data for Creating a Routing : assembly_item_id,
    organization_id, routing_type, transaction_type, process_flag
    And following scripts can be used to load routing header and operations equences.
    INSERT INTO BOM_OP_ROUTINGS_INTERFACE
    (assembly_item_id,
    organization_id,
    routing_type,
    transaction_type,
    process_flag)
    VALUES (2255800,207,1,'Create',1);
    INSERT INTO BOM_OP_SEQUENCES_INTERFACE
    (assembly_item_id,
    organization_id,
    operation_seq_num,
    Department_code,
    effectivity_date,
    transaction_type,
    process_flag,
    operation_description)
    VALUES
    (2255800,207,100,'ASSEMBLY',
    to_date('24-FEB-2009'),'Create',1,
    'Paint Wagon');
    Q2: One more question, can an expense item can be added to the bill and can contribute the cost.
    As there is a confusion of what I asked, below I am rephrasing my question
    By an Expense Inventory Item, I mean an item that is just tracked for quantity only i.e.,Checking the attributes - Inventory Item, Stockable, Transactable under Inventory Tab and not checking the attribute - 'Inventory Asset Value'.
    My question here is, For these Expense Inventory Items, What is the difference between having the 'Costing enabled' attribute turned ON as opposed to having it UNCHECKED
    *Q3 I have tried to load the items and I could only load 1st level of components but could not load second level of bom at the same time.
    While inserting I have inserted plan level too.
    Please let me know if I have to do anything different to load second level.*
    Thanks
    James

    You may want to look at using the more4apps bill of materials wizard, an excel based solution for uploading assemblies and their components.

Maybe you are looking for