Question about using TX FM with Win

I am using the MuVo TX FM 256 with Windows 98, and so I am using Windows Explorer to transfer files, (I have not installed Creative software). There's no "Safely Remove Hardware" item that I know of. Is there anything wrong with just removing the player from the USB dri've without "warning" the machine in any way? I've been doing it this way for about one week now, without problems that I can see, (though the LCD screen sometimes darkens upon removal).
Another question, though this one is not something I'm immediately concerned with:When I fast forward in an mp3 longer than 7 minutes, the time does not update, (it shows the same time), until I let it "play" again, at which time it reads the correct time. Since it reads the correct time at all times except when it's fast forwarding or rewinding, it's nothing more than an inconvenience. Btw, it's firmware ..0, and I'd rather not change it since this works well enough, after reading about some of the firmware problems.
Joe

All the "safely remove" function does is shut the device down properly and close any program links with it.
If you aren't using the device at the time chances are things will be OK.

Similar Messages

  • Multiple questions about using iWeb '09 with my Host Excellence, GoDaddy & Storenvy Accounts. Can you Help?

    Hello, my name is Luis Diaz and I have always appreciated the help here in the iWeb community.  I've been using iWeb for a long time. For some reason my usernames are not working lately - LuisDiazArt or RabidArt)
    I updated my domain service with Host Excellence before MobileMe expired and thank you guys for the help with that. So far it's been a flawless service and because of that I'm very happy. I also have all my domains in GoDaddy. They have been very helpful
    Okay I'm going to try to explain my current problem. I'm trying to create a subdomain in GoDaddy for my website: LuisDiazArt.com
    I went and added a Subdomain in the Control Panel as: store.LuisDiazArt.com The subdomain suppose to mask my store: luisdiaz.storenvy.com
    I thought by adding this subdomain it would make all the addresses look similar (and more clean) just in case someone gets lost along the way.
    So what's happening after I waited an hour is I'm getting: http://store.luisdiazart.com/LuisDiazArt.com/Art_of_Luis_Diaz_%7C_LuisDiazArt.co m.html
    I'm getting the huge and familair long addresses and it is not pointing to my store, but to the homepage.
    Did I do something wrong or do I not understand something fully about subdomains? I thought you can make a subdomain point to another site. Perhaps it can't be done the way I'm thinking about this.
    So to fix this issue I am thinking about making a duplicate website with a different domain name (RabidArt) and mask it with LuisDiazArt (this is site name I use on business card and everything else).  After that make a subdomain with the same: http://store.luisdiazart.com
    Perhaps this may fix the problem.
    So to do this I may need to add another site onto my account (Basic and not Business) on HostExcellence.
    So my other questions are:
    Can I have multiple domains or websites using iWeb on a Basic Host Excellence Account? I checked out a few websites, but couldn't really find out if I can have multiple domains/websites using iWeb on Host Excellence with my current account.
    I do know how to make a new duplicate site, but do you publish it the same way as you would with the regular site or do I have to so something different?
    Hopefully the problem can be fixed not having to do a new site and maybe it was something I did wrong when I added a subdomain.

    To add more domains you need to upgrade your account.
    To have a sub domain for your store you need to create a separate site in iWeb and upload these files to the store.luisdiazart.com folder.
    The files for the main site go in the luisdiazart folder.
    Use an external hyperlink to link one to the other.

  • Question about using Apple Mail with Verizon

    Not sure if this is an Apple or Verizon question, but leaning toward the latter so here it is...
    On my MacBook Pro, running OS 10.8.3, I have several accounts. Each has its own Verizon username e.g. [email protected], [email protected] etc. Everything had been working fine but last night I had an issue sending email from, say, the username1 account. I went to the username account to test it out and it worked fine - I sent an email to username1 in Mail and username1 had no problem receiving it. But username1 couldn't send email - it gave an error message about the outgoing server, asking me if I wanted to try another one.
    Now the odd thing is that the outgoing server name was (and has always been) exactly the same for username1 and username. But when I selected outgoing.verizon.net:username1 instead of the usual one, it was able to send email. I'm not sure why that other server name was listed as an option, but glad that it was there.
    So my question is why would two accounts on the same computer have to use two different Verizon outgoing mail servers in order to send email?
    Thanks.
    P.S. I should mention that, based on input from this forum, I ignored Verizon's "urgent" email from back in March about changing mail settings.

    abcdefghij wrote:
    Not sure if this is an Apple or Verizon question ... last night I had an issue sending email ... why would two accounts on the same computer have to use two different Verizon outgoing mail servers in order to send email? ...
    P.S. ... based on input from this forum, I ignored Verizon's "urgent" email from back in March about changing mail settings.
    There's input, and then there's input.
    By this time you should be using only the recommended settings across all your devices and platforms.  As far as I can determine, all devices, operating systems, mail clients, etc., have been successfully configured using the new recommended settings.  There are indeed individuals who are still finding issues, but the general consensus among experienced users seems to be that the issues reported are related to individual settings and devices, and do not stem from the server side.
    BTW I don't at all mean to suggest that a particular user is anything less than capable.  I'm just stating what I believe is the situation today.

  • Question about using a Projector with MacBook Pro

    Sorry if this is the wrong post location, but I figured people here would be the most knowledgeable about the topic.
    I'm looking into getting a portable projector for under $450 that will work with my 2009 MacBook Pro for: a) watching instructional videos and b) doing some web surfing and a little programing. I can't get a monitor because I need portability and a picture at least 30" due to some visions issues.
    I've looked into a few including the Optoma PK301 (sold at apple) and the Samsung 410ME (higher lumens, but lower res). Most of them have a max resolution of 800x600 and I'm wondering how that will appear on a 30"-45" projection? Will websites wider than 800 pixels be cut off? Does that mean a video with a resolution of 960x540 will be cut off or look funny?
    The PK301 has a Native WVGA (854 x 480), but "supports" WXGA (1280 x 800) through VGA adapter; HD (1080i) through HDMI. So how will that render on the wall?
    I sincerely appreciate your time and help.

    I bought the PK301 becasue it has great reviews. But not on the MAC products... If any mac techs are around... appreciate some help here. Thanks.
    Sharon

  • Question about using VMware Fusion with mutiple user accounts on the mac

    I know this isn't a Fusion forum as such, but wondered if anyone knew the answer to this problem. I installed the latest version of fusion on my machine and a copy of windows XP. It's very good and am impressed with the ease and speed of it. However, I am the administrator and my 3 children have user accounts on the same computer. When my son logs in to his user account and starts up Fusion to do some homework on a windows only program, there isn't a virtual machine to start up. Does this mean that using fusion I can only use one mac user account? Or can I move the windows folder to a location for all to use, or is there a setting that I need to alter in Fusion? Perhaps I need to install windows again on his account. If so will this cause other potential problems and unnecessarily hog hard drive space. I would prefer fusion to boot camp because I need both windows and mac at the same time. Any help would be appreciated.

    Did you ask the VMware Community?
    My guess is yes, you need to put it in a Public folder or outside your account. XP doesn't take a lot of disk space, so maybe they should have their own (but then you need another copy/license).
    You may need to edit one of the prefs files pointing to the image, unless an alias or symbolic link will do.
    VirtualBox is free VM and is probably more than able to handle their needs.
    Probably need / want to create a new Windows user account while you are at it.

  • I have a question about using multiple ipads in our school.  Each of our teachers have a iPad and AppleTV in their classroom.  The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher

    I have a question about using multiple ipads in our school.  Each of our teachers have a iPad and AppleTV in their classroom.  The issue is, with our classrooms so close in proximity to one another, is there a way to pair teacher #1 iPad to its AppleTV without effecting/projecting onto the adjacent teachers #2 classroom AppleTV?

    Not as such.
    Give the AppleTV units unique names and also enable Airplay password in settings with unique passwords for each teacher.
    AC

  • Hi I have a question about shooting in Raw with my Canon EOS 6d. I'm in the process of learning photography and my goal was to start shooting in raw. I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The pho

    Hi I have a question about shooting in Raw with my Canon EOS 6d.
    I'm in the process of learning photography and my goal was to start shooting in raw.
    I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
    In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
    I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
    Heather

    In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
    That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
    Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
    I'd appreciate any advise on which route to go and how upgrade and what it may cost.
    It all depends on your preferred workflow and your budget.
    Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
    Camera raw, DNG | Adobe Photoshop CC
    Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
    Creative Suite 6
    Or join the Cloud and pay the monthly fee
    Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

  • Hi, I have quick question about use of USEBEAN tag in SP2. When I specify a scope of SESSION for the java bean, it does not keep the values that I set for variable in the bean persistent.Thanks,Sonny

     

    Make sure that your bean is implementing the serializable interface and that
    you are accessing the bean from the session with the same name.
    Bryan
    "Sandeep Suri" <[email protected]> wrote in message
    news:[email protected]..
    Hi, I have quick question about use of USEBEAN tag in SP2. When I
    specify a scope of SESSION for the java bean, it does not keep the
    values that I set for variable in the bean persistent.Thanks,Sonny
    Try our New Web Based Forum at http://softwareforum.sun.com
    Includes Access to our Product Knowledge Base!

  • Question about using new battery in old Powerbook

    I have a pre-intel Powerbook G4, and the battery is pretty much toast (lasts about 15 minutes now). I have ordered a new battery for it, and I have this question about using it:
    Am I smarter to keep the new strong battery out of the PB most days (as I usually work with it plugged in at home) and just pop it in when I know I will be out surfing on batteries? Or is it just as good living in my laptop 24/7 and only occasionally being called upon to do its job?
    Current bad Battery Information below:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 1144
    Remaining Capacity (mAh): 1115
    Amperage (mA): 0
    Voltage (mV): 12387
    Cycle Count: 281
    thanks folks, Shereen

    Hi, Shereen. Every Powerbook battery wants to be used — drained and then recharged — at least every couple of weeks. If you've always used your Powerbook on AC power nearly all the time, and not followed that pattern of discharging and recharging the battery every week or two, it's possible that your use habits have shortened the lifespan and prematurely diminished the capacity of your old battery. Of course it's also possible that your battery is merely old, as a battery's capacity also diminishes with age regardless of how it's used. You didn't say how old the battery is in years, so this may or may not be an issue. I mention it only because it can be an issue.
    For general information on handling a battery for the longest possible lifespan, see this article. My advice on the basis of that article and long experience reading these forums is that it would be OK to do as you propose, but I doubt that you'd derive any significant benefit from it. You would still want to be sure of putting the new battery through a charge/discharge cycle every week or two, even if you didn't have a reason to use the Powerbook away from home or your desk, because sitting unused outside the computer is just as bad for a battery as sitting unused inside it. And you should never remove the battery from your computer when it's completely or almost completely discharged and let it sit that way any longer than a day or two.
    Message was edited by: eww

  • Question about using TVARV in an ABAP program

    Hello gurus, Im sorry about the silly question.
    I have a question about using TVARV in an ABAP program.
    A program is presenting a problem and I think that in this code:
    SELECT SIGN OPTI LOW HIGH
      FROM TVARV
      INTO TABLE R_1_163431035_VELOCIDADE
      WHERE  NAME = '1_163431035_VELOCIDADE'
      AND    TYPE = 'S'.
      IF ZMM001-VELOCIDADE_B   IN R_1_163431035_VELOCIDADE AND
          ZOPERADORAS-OPERADORA = 'ABCD' AND
          ZMM001-MATERIAL       IN R_1_163431035_PRODUTO.
      ELSE.
      ENDIF.
    What happens is that the value "ZMM001-SPEED" B not exist in "R1_163431035_VELOCIDADE" but the program executes commands under the IF and not under the ELSE, as I imagine it would work. Is this correct ?
    I am new to ABAP programming, but I have a lot of XP in other programming languages ​​and this makes no sense to me.
    Anyone know where I can find some documentation of the use of "TVARV" in ABAP programs?
    I search the Internet if other programmers use TVARV this way, but found nothing, which leads me to think that was a quick and dirty solution that used here.
    If this is a bad way to program, what would be the best way?
    Regards
    Ronaldo.

    Hi Ronaldo,
    But in this case, the range is not empty, there are 17 records, in this way.:
    For the column "SING" all values ​​are "E"
    It means that the result is false if ZMM001-VELOCIDADE_B has the same value as one of the 17 records (E = exclude).
    For instance, if it has value 'C' and one of 17 records matches C, then the result is false.
    The "IF" with "IN" using "TVARV" as used in the program of the post above has the same behavior of a selection screen?
    Yes, the same behavior as the selection criterion to be exact. You can press the help key in the complex selection dialog for more info.
    I know it's a silly and very basic question, but other language that I used, only the SQL has the "IN" operator, but I think they work in different ways, so I would like to understand how it works in ABAP.
    Not silly ;-). Yes they work differently.
    More info here:
    - http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba74635c111d1829f0000e829fbfe/frameset.htm
    - http://help.sap.com/saphelp_nw70/helpdata/en/9f/dba71f35c111d1829f0000e829fbfe/frameset.htm
    BR
    Sandra

  • I have a question about using adobe CS files in CS6 edition

    I am a graphic artist . I have a question about using adobe CS files in CS6 edition. when I am gonna open thse adobe CS created files in CS6 Edition i get a color variation than i made with the CS version.Please give me an idea about this issue as soon as possible.If you need i can upload my problem as a screenshot to clearity

    donrulz,
    Are your Edit>Color Settings the same?
    Are you using spot colours, such as Pantone (there have been some changes in CMYK values with new colour books)?

  • Where Would be the best category to ask a question about using dashboard?

    Where Would be the best category to ask a question about using dashboard?

    However, don't ask it in this topic. Create a new topic for the question with a title describing that you are looking for Dashboard help.

  • Question about using 10g/11g and APEX ...

    Hi,
    I just recently learned of Oracle's APEX and have a few questions about using it.
    Can I use APEX with express, standard, and enterprise editions of 10g and 11g?
    Are all of these free to use?

    You might want to read about APEX rather than jumping into questions that are reasonably well documented. Info at http://www.oracle.com/technology/products/database/application_express/index.html
    Your specific questions:
    1) Apex is a package that can be installed into any properly licensed database.
    2) The price for the production license of the database varies by edition.
    The price for Express Edition is $0 for use in production. Part of the cost for that edition is 'no Oracle Support based support, no patches, data volume limitation, etc.'

  • Question about using Runtime.getRuntime();

    hi all
    i have a question about using Runtime.getRuntime(). if i use this to get a runtime reference to run an external program, is it considered as starting a new thread inside the thread that starts it?
    is it safe to do it in the Session EJB? if not, what can you recommand to do it? thanks

    hi all
    i have a question about using Runtime.getRuntime().
    if i use this to get a runtime reference to run an
    external program, is it considered as starting a new
    thread inside the thread that starts it? No. Starting a process, starts a process. Threads have nothing to do with it.
    is it safe to do it in the Session EJB? if not, what
    can you recommand to do it? thanksSo what? Run another process? If you want to run another process in java then your choices are to use Runtime.exec() or use JNI. And using JNI will probably end up doing exactly the same thing as Runtime.exec().
    "Safe" is harder. Typically to correctly use Runtime.exec() you must use threads. And as noted threads ideally should not be used. You can use them but if you do you had better understand why they didn't want you using them in the first place. You had also better be sure that you really want to wait for it to complete.
    Other than that Runtime.exec() is safe because it can't crash the VM like other interfaces can (like JNI.)

  • TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

    iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
    as i said i have two iphone 4S,,,,,
    1st one --- has os 5.1
    2nd one has os 6.0
    i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
    but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
    plz reply asap...!!!
    thnxxx in advance!!!

    If not this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    Also heating sometimes works. See:
    Why can't I select my wifi settings?
    A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then:
    Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

Maybe you are looking for