Question about VacationRequest sample

Hi
Thank you for reading my post.
I have looked at some of Oracle SOA suite sample and one of them is VacationRequest under bpel demos folder.
What i can not understand is who's job is to develop the web pages that are show in the
http://localhost/integration/worklistapp/TaskList ?
a page like :
http://i12.tinypic.com/33wus8x.jpg
does SOA suite generate it or developer should hard code the web ui?
maybe it is the prototype test page, but any comment about this page with its good menu and them will be helpfull.
thanks

The SOA suite comes with a built in task list like that, but you can also create pages with this information on your own accessing the information from BPEL.
For further SOA Suite question use their forum at:
SOA Suite

Similar Messages

Question about Pagecontrol sample app

Hi,
I've been looking at some sample apps to help with a beginners project that I'm doing. There is a Apple sample app for PageControl.
The app delegate contains this code (I hope I'm OK to include this here, please tell if not)
// replace the placeholder if necessary
MyViewController *controller = [viewControllers objectAtIndex:page];
if ((NSNull *)controller == [NSNull null]) {
controller = [[MyViewController alloc] initWithPageNumber:page];
[viewControllers replaceObjectAtIndex:page withObject:controller];
[controller release];
// add the controller's view to the scroll view
if (nil == controller.view.superview) {
CGRect frame = scrollView.frame;
frame.origin.x = frame.size.width * page;
frame.origin.y = 0;
controller.view.frame = frame;
[scrollView addSubview:controller.view];
I've highlighted two lines and my question is: how can controller be used when it has already been released in the previous section?
I'm very new to this and I thought that releaseing an object meant that you could no longer get to it?
Many Thanks in advance
Ziximo
Message was edited by: Ziximo

Objects aren't deallocated until their retain count goes to zero. When the controller is alloced its retain count is one. When the controller is added to the array its retain count is incremented to two. It's then released to reduce the count to one. Assuming the controller isn't retained by any other object, it will be dealloced when it's removed from (and thus released by) the array. - Ray

Question about WListBoxComposite sample plugin

Hello everyone,
I have a palette based on the WListBoxComposite sample plugin, now I need to change it(or completely replace it ) cause of new requirement. I used to have constant number of fields or columns with variables number of records corresponding with those fields/columns in this palette, now I get the number of fields/columns in runtime . My question is what would be the best approach to implement this ? to be more clear of what I want to do consider to want to show the personal information fields like name, address,....(that you you get them in runtime from a database) and want to show this information for employees in each row.
Thanks,
Kamran

In your resource file you have a resource for the rows you put into the tree: >resource WLBCmpNodeWidget (kWLBCmpListElementRsrcID + index_enUS) >{ >> __FILE__, __LINE__, >< kWLBCmpListParentWidgetId, kPMRsrcID_None, // WidgetId, RsrcId >> kBindLeft | kBindRight, // Frame binding Place a frame (GenericPanelWidget) inside the this to contain the dynamic widgets. Now create resource type in the resource file for each type of widget you need in the line. At runtime you instantiate a widget for each field: >InterfacePtr<IControlView> iControlView ((IControlView*)::CreateObject(::GetDataBase(this), RsrcSpec(LocaleSetting::GetLocale(), kYourPluginID, kViewRsrcType, kYourWidgetRsrcID), IID_ICONTROLVIEW)); >iControlView->SetFrame(frame); // The frame is the place you want it inside the content panel >iControlView-> SetWidgetID(); // you need to calculate this also, as you don't know how many you will have >yourContentFrame->AddWidget(iControlView); // of type IPanelControlData which you can get in you TreeViewWidgetMgr If you dont want to use the resource files you can create it dynamically and set all the parameter through function calls: >IControlView* iControlView = (IControlView*)::CreateObject(kYourWidgetBoss,IID_ICONTROLVIEW); You can also use the kWLBCmpListParentWidgetId as a content frame for the widgets, but you then need to remember to take into account other "static" widgets you might have in the line.

A question about sst sample driver

I have checked the Solaris 8 version of sst SCSI sample
driver. There is one thing I couldn't understand:
In the definition of sst_fill_cdb, sstprivp->priv_amt is used
as transfer length. This variable is set to bp->b_bcount -
pkt->pkt_resid in sst_make_cmd() when the pkt is allocated. But it is never updated during subsequent
partial DMA transfers. Is this a bug or some thing other than the driver is updating this variable ( unlikely since
this is private to the driver) ?
Any explanations are very appreciated.

Hi no1,
Do these devices have drivers that you have installed? Do they have a driver application programming interface (API) that you can access, probably through a C++ DLL? I assume you're using LabVIEW (since this is the board you posted to). If you're using LabVIEW and you do have DLLs for your cards, you can use the Call Library Function Node or the Shared Library Import Wizard (which creates wrapper VIs for your DLL calls).
Otherwise, you can use NI-VISA to communicate with your devices. Here is a tutorial how to configure a USB device using the VISA Driver Development Wizard (which would be analogous to Firewire), and here is an overview of VISA.
You would read the data from device A and then write that data to device B, using either the DLLs or VISA, depending on which route you choose. Unless the devices have specific functions to transfer data to each other in their API, you will have to transfer the data by reading and writing the data in LabVIEW. I hope this helps!
Regards,
Missy S.
Calibration Engineer
National Instruments

Questions about the sample DB

I am using the Siebel 8.0 sample DB to do the lab.
But there is no Application-Administration screen.
Can anyone help me?
Thanks.

The other thing to check is the Responsibilities and Views.
But yes, it's odd this doesn't work out of the box.
On second thought, you will need the Adminstration Screen for that.
As a last resort, read this post Linking Siebel Sample DB and SQL Server
and see if you can query the tables to see if everything is in place.

A simple question about DAQ data sampling

Hi all:
Now I meet a very basic question about DAQ sampling. I am using NI PCI-6040E DAQ card, SCXI-1001 chasis, SCXI-1102, SCXI1300 terminal block, and SCXI1160 relay module.
I am not sure , is it possible if I want to test a voltage (1 volt) on a resistor. Now I am connecting the Ch0+ to resistor+ (24 volt), and connecting Ch0- to resistor-(23 volt). So the voltage between resistor+ and resistor- should be 1volt. Actually, It is working at the first, but after I want to test 9 channels based on this connection. The Measurement & Automation can't read data from the DAQ card. (when I test it by multimeter, I can get the voltage data on the Ch0+ and Ch0- of SCXI1300 terminal block).
That's strange, does anybody know what' s wrong about it?/
Thanks a lot

Hi hanwei,
According to the specifications of the PCI 6040E (page 3), the input signal and common mode voltage should never exceed 11V from ground. I believe this is the reason you are able to measure the potential of a battery but not the 24V signal (even though the differential value is only 1V).
Best Regards
Hani R.
Applications Engineer
National Instruments

Question about EIGRP's feasible successor

Hi,
I read article "Who's Afraid of DUAL-3-SIA?" on http://www.cisco.com/en/US/partner/about/ac123/ac114/ac173/Q2-05/tech_routing.html
there is a sample to explain a new IOS feature.
But I have a question about that sample,
why Router C can't be Router A's feasible successor?
IF C is A's feasible successor, A can declare C as the alternate route as soon as receive B's query.
Am I misunderstanding the concept of feasible successor? can anybody give me some hint?
thank you all!
Regards,
sha

HI Sha,
There is no mention of any values for bandwidth and load in the topology in that link.
What I see that the link between router A to Router B is gigabit which means the bandwidth will be gbps. Now the link between Router A to Router C is only T1 which will be 1.54 MBPS. Much difference.
Now when Eigrp will calculate the metric the best metric will be from router C and that will become the best path. Now it will also check the reported distance from router C. If the reported distance from Router C will be more then the best metric which is been calculated from Router B it will never become feasible succ.
In short to become the feasilbe succ its reported dist should be less then the Feasible distance.
This link will give a better pic.
http://www.cisco.com/warp/customer/103/eigrp-toc.html#eigrpmetrics
HTH
Ankur

Basic Questions About Compiling Source

Hi!
I have some very basic questions about compiling source on 10.6. BTW, if the unix discussions still exist, they've hidden them pretty well, so I hope I'm in the right place for this!
First off, you simply cd to the source dir, wherever it may be - in my case ~/Downloads/source/ - and during the install process, everything will be installed in its proper dir, right?
How do you know which compiler to use? There seem to be several: make, gmake, gcc, g++, etc...
Once you do figure out which compiler to run, the process is supposed to go like this, right?
./configure
make (or whatever)
make install
But this doesn't always work for me. For instance, I'm trying to compile 'arm', but it doesn't seem to have a 'configure' script.
$ ls ~/Downloads/arm
ChangeLog
README
armrc.sample
setup.py
LICENSE
arm
install
/src
Maybe it's that 'setup.py' file? What are you supposed to do?
Of course, it's not only this one that's given me trouble. Sometimes the readme will say I have to edit a certain file for my system. Are there just a few standard changes you always make? Or is it...how can I put it...complicated? How do you find out what's needed in those cases?
OS 10.6.8
Xcode 3.2.4
Python 2.7

sudont wrote:
I have some very basic questions about compiling source on 10.6. BTW, if the unix discussions still exist, they've hidden them pretty well, so I hope I'm in the right place for this!
This is the place for UNIX discussions. If you have developer-related questions, there is a forum dedicated to that as well: Developer Forums
First off, you simply cd to the source dir, wherever it may be - in my case ~/Downloads/source/ - and during the install process, everything will be installed in its proper dir, right?
Yes. Hopefully the project you want to install follows standard conventions. If so, you can do "./configure", then "make", and finally "sudo make install" to install the software into "/usr/local".
How do you know which compiler to use? There seem to be several: make, gmake, gcc, g++, etc...
The make file will figure that stuff out.
Once you do figure out which compiler to run, the process is supposed to go like this, right?
./configure
make (or whatever)
make install
Yes, with the addition of "sudo" before "make install" because "/usr/local" is owned by root.
But this doesn't always work for me. For instance, I'm trying to compile 'arm', but it doesn't seem to have a 'configure' script.
$ ls ~/Downloads/arm
ChangeLog
README
armrc.sample
setup.py
LICENSE
arm
install
/src
arm? You mean "arm (anonymizing relay monitor) - Terminal status monitor for Tor relays." You really don't want to be messing with that stuff. The only people involved with Tor that are trustworthy are US Navy intelligence who have their own uses for it. If you don't understand it as well as they do, best stay away.

A question about design of Java Application on java card.

Hi every one,
I have a question about design of Java applet on java card,
There is an application on my card that it is not java card, it include a DF and some EF under DF, I would like to know if I want to have this application on java card ,how can I design DF and EF on java card ,I mean is there any relation between DF,EF with applet and file? for example can I say DF is same as applet and EF is same as file?
I'll appreciate for any help .
yours sincerely,
orchid

hi
you can write a java class for DF.
an instance of DF class have some EF objects.
for example,
samples/com/sun/javacard/samples/JavaPurse/CyclicFile.java
implements ISO 7816 CyclicFile ( EF )
see also:
http://forum.java.sun.com/thread.jspa?threadID=673745&messageID=3936272
best regards,
siavash

Question about LRU in a replicated cache

Hi Tangosol,
I have a question about how the LRU eviction policy works in a replicated cache that uses a local cache for its backing map. My cache config looks like this:
<replicated-scheme>
<scheme-name>local-repl-scheme</scheme-name>
<backing-map-scheme>
<local-scheme>
<scheme-ref>base-local-scheme</scheme-ref>
</local-scheme>
</backing-map-scheme>
</replicated-scheme>
<local-scheme>
<scheme-name>base-local-scheme</scheme-name>
<eviction-policy>LRU</eviction-policy>
<high-units>50</high-units>
<low-units>20</low-units>
<expiry-delay/>
<flush-delay/>
</local-scheme>
My test code does the following:
1. Inserts 50 entries into the cache
2. Checks to see that the cache size is 50
3. Inserts 1 additional entry (as I understand it, this should cause the eviction logic to kick-in)
4. Checks the cache size again, expecting it to now be 20
With HYBRID and LFU eviction policies, the above logic works exactly as expected. When I switch to LRU however, the code at step 2 always returns a value significantly less than 50. All 50 inserts appear to complete successfully, so I can only assume that some of the entries have already been evicted by the time I get to step 2.
Any thoughts?
Thanks.
Pete L.
Addendum:
As usual, in attempting to boil this issue down to its essential elements, I left out some details that turned out to be important. The logic that causes the condition to occur looks more like:
1. Loop 2 times:
2. Create named cache instance "TestReplCache"
3. Insert 50 cache entries
4. Verify that cache size == 50
5. Insert 1 additional entry
6. Verify that cache size == 20
7. call cache.release()
8. End Loop
With this logic, the problem occurs on the second pass of the loop. Step 4 reports a cache size of < 50. This happens with LRU, LFU, and HYBRID-- so my initial characterization of this problem is incorrect. The salient details appear to be that I am using the same cache name each pass of the loop and that I am calling release() at the end of the loop. (If I call destroy() instead, all works as expected.)
So... my revised question(s) would be: is this behavior expected? Is calling destroy() my only recourse?
Message was edited by: planeski

Robert,
Attached are my sample code and cache config files. The code is a bit contrived-- it's extracted from a JUnit test case. Typically, we wouldn't re-use the same cache name in this way. What caught my eye however, was the fact that this same test case does not exhibit this behavior when running against a local cache directly (as opposed to a repl cache backed by a local cache.)
Why call release? Well, again, when running this same test case against a local cache, you have to call release or it won't work. I figured the same applied to a repl cache backed by a local cache.
Now that I understand this is more a byproduct of how my unit tests are written and not an issue with LRU eviction (as I originally thought), it's not a big deal-- more of a curiosity than a problem.
Pete L. Attachment: coherence-cache-config.xml (*To use this attachment you will need to rename 545.bin to coherence-cache-config.xml after the download is complete.) Attachment: LruTest.java (*To use this attachment you will need to rename 546.bin to LruTest.java after the download is complete.)

Question about setup_MITE in the PCI-MIO-16E-1

I have a quick question about setup_MITE in the PCI-MIO-16E-1. In one of the manuals, it states that if you're using Dell Optiplex GX series for our hardware configuration, is it true we need to re-write the MITE functions to correlate with the hardware? Please if you can clarify what this means, I would really appreciate it. Thank you in advance.

National Instruments is starting a new newsgroup to provide a forum for customers to discuss register level programming issues and ask questions. This newsgroup is not a direct support channel for register level programming, but may be monitored by National Instruments engineers. Please post you question with additional detail in:
natinst.public.daq.driver-development.general
Christian
Christian Loew, CLA
Principal Systems Engineer, National Instruments
Please tip your answer providers with kudos.
Any attached Code is provided As Is. It has not been tested or validated as a product, for use in a deployed application or system,
or for use in hazardous environments. You assume all risks for use of the Code and use of the Code is subject
to the Sample Code License Terms which can be found at: http://ni.com/samplecodelicense

I want to ask the question about phasor measurement.

I want to ask the question about phasor measurement.the first one is that how can I accomplish the sychronized sampling with GPS?The other question is that how can I adjust the sampling rate for DAQ when the system frequency alter continuously.(if I used the DFT,due to the altering of frequency,I can't get the completed waveform)"

Synchronising DAQ with GPS depends on the DAQ sampling rate. If the rate is higher than 2 Hz you can sample the 1PPS pulse of your GPS receiver together with your data.
You change the sampling rate with the AI Clock Config.vi. You cannot do this on the fly so you must stop DAQ with AI Control.vi reconfigure the sampling rate and then start it again.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Basic questions about programing for J9 VM

I need to create a java application to run on a Pocket PC 2003 OS and I'm limited to using IBM's Websphere J9 Virtual Machine. I'm new to using java in this capacity and therefore have lots of questions which I'm guessing are pretty basic. Despite my best efforts, I've found very little to help me online. Below are a couple questions I have that I'm hoping someone can help me with. Even better, if you know of any resources that could help me with these and other questions, I'd love to have them. Thanks in advance.
1. I'm using standard AWT for the GUI but I'm having problems getting frames, dialogs, etc., to come up in anything less then full screen. setSize() and resize() have no effect, even if I extend the frame and override the setMinimumSize, setPreferredSize, setMaximumSize methods. What do I need to do to get a child window to appear in something less than full screen?
2. I'd like to be able to add menu's to the buttom toolbar (with the keyboard) but have no idea how I would add something to it. Can someone point me in the right direction?
3. When my application gets an iconified event I go ahead and call a System.exit() to exit the application. This doesn't kill the java VM though, which continues to run in the background (taking up plenty of memory). If I run my application using the J9w.exe so that it runs without the console, then not only does the VM continue to run, but I have no way to stop it (the running program list can't see it). Since each time I run my application it starts a new VM, it only takes a couple of times before I'm out of memory and have to do a soft reset of the PDA to make things right. Can I kill the VM when I kill my application?
4. I learn best by looking at example code, but have been unable to find any code people are running on J9. I have the GolfScoreTracker installed and running on my PDA, but the jar file contains only the classes. Since it's supposed to be a demo, I had hoped that the source code would be included, is that hoping too much or is the source code available somewhere? In addition, if you know of any applications out there with available source code that are known to run well on a PocketPC J9 environment I'd appreciate the link.

Hi there, I saw your questions, im currently developing a java pocket pc application as well and here's what i go so far:
AWT seem to be hard to use on pocket pc, instead i recommend that you use SWT, which is a technology developed by eclipse. It's already installed on the eclipse plugins, you just need to download the jar and dll files for the pocket pc. They are available at: http://www.eclipse.org/downloads/index.php
I assume that you already have the J9 working on your device. So you only need to copy the SWT.jar file and the swt-win32-3064.dll to the folder containing the .class files on your device.
Now, on your java IDE(im using eclipse) Add the SWT.jar library to your project which should be on C:/eclipse/plugins/org.eclipse.swt.win32_3.0.2/ws/win32/swt.jar or something like taht depending on your eclipse root.
Now you are ready to code some SWT, here is a sample program from Carolyn MacLeod, i modified a few things so it could run on the pocket pc but it's almost the same. Once you coded in eclipse run it, then copy the class file from your desktop to your device(There should be like 4 or 5 classes like sample.class, sample$1.class etc. copy all of them) where you put the jar and dll files(If program does not run you may try to rename the dll file for swt-win32-3050.dll instead of 3064.dll). Now after you have everything set up you need to create the lnk file in order to run the program. On your desktop create a new textfile and write the following on it:
255#"\Archivos de Programa\J9\PPRO10\bin\j9w.exe" "-jcl:PPRO10" "-cp" "\My
Documents\Java\swt.jar" ;\My Documents\Java" sample
Paths depend on your install, and the place where you put your classes and jar file. path for j9w is usually "\Program Files\J9\PPRO10\bin\j9w.exe", and the last word should be the classname.
Currently this form only displays an image on a canvas, click on the browse button and choose a pic and it will display on the canvas. Im trying to connect the form to an oracle database but no success yet on the device.
Hope it helps, if you have any questions about the code or something, and I know the answer, please feel free to ask.
See ya
import org.eclipse.swt.*;
import org.eclipse.swt.widgets.*;
import org.eclipse.swt.layout.*;
import org.eclipse.swt.events.*;
import org.eclipse.swt.graphics.*;
public class sample {
static Shell shell;
static Display display;
static Text dogName;
static Text textdb;
static Combo dogBreed;
static Canvas dogPhoto;
static Image dogImage;
static List categories;
static Text ownerName;
static Text ownerPhone;
static String[] FILTER_EXTS = {"*.jpg"};
public static void main(String[] args) {
display = new Display();
shell = new Shell(display, SWT.RESIZE | SWT.CLOSE);
Menu menu = new Menu(shell, SWT.BAR);
shell.setText("Dog ShowS Entry");
shell.setMenuBar(menu);
GridLayout gridLayout = new GridLayout();
gridLayout.numColumns = 3;
shell.setLayout(gridLayout);
new Label(shell, SWT.NONE).setText("Dog's NameS:");
dogName = new Text(shell, SWT.SINGLE | SWT.BORDER);
GridData gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL);
gridData.horizontalSpan = 2;
gridData.widthHint = 60;
dogName.setLayoutData(gridData);
new Label(shell, SWT.NONE).setText("Breed:");
dogBreed = new Combo(shell, SWT.NONE);
dogBreed.setItems(new String [] {"Collie", "Pitbull", "Poodle", "Scottie"});
dogBreed.setLayoutData(new GridData(GridData.HORIZONTAL_ALIGN_FILL));
Label label = new Label(shell, SWT.NONE);
label.setText("Categories");
label.setLayoutData(new GridData(GridData.HORIZONTAL_ALIGN_FILL));
new Label(shell, SWT.NONE).setText("Photo:");
dogPhoto = new Canvas(shell, SWT.BORDER);
gridData = new GridData(GridData.FILL_BOTH);
gridData.widthHint = 60;
gridData.verticalSpan = 3;
dogPhoto.setLayoutData(gridData);
dogPhoto.addPaintListener(new PaintListener() {
public void paintControl(final PaintEvent event) {
if (dogImage != null) {
event.gc.drawImage(dogImage, 0, 0);
categories = new List(shell, SWT.MULTI | SWT.BORDER | SWT.V_SCROLL);
categories.setItems(new String [] {
"Best of Breed", "Prettiest Female", "Handsomest Male",
"Best Dressed", "Fluffiest Ears", "Most Colors",
"Best Performer", "Loudest Bark", "Best Behaved",
"Prettiest Eyes", "Most Hair", "Longest Tail",
"Cutest Trick"});
gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL | GridData.VERTICAL_ALIGN_FILL);
gridData.widthHint = 60;
gridData.verticalSpan = 4;
int listHeight = categories.getItemHeight() * 12;
Rectangle trim = categories.computeTrim(0, 0, 0, listHeight);
gridData.heightHint = trim.height;
categories.setLayoutData(gridData);
Button browse = new Button(shell, SWT.PUSH);
browse.setText("BrowsePic");
gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL);
gridData.widthHint = 60;
browse.setLayoutData(gridData);
browse.addSelectionListener(new SelectionAdapter() {
     public void widgetSelected(SelectionEvent event) {
          FileDialog dialog = new FileDialog(shell, SWT.OPEN);
          dialog.setFilterExtensions(new String[] {"*.*"});
          String fileName = dialog.open();
if (fileName != null) {
dogImage = new Image(display, fileName);
shell.redraw();
Button delete = new Button(shell, SWT.PUSH);
delete.setText("No action");
gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL | GridData.VERTICAL_ALIGN_BEGINNING);
gridData.widthHint = 60;
delete.setLayoutData(gridData);
delete.addSelectionListener(new SelectionAdapter() {
public void widgetSelected(SelectionEvent event) {
Button enter = new Button(shell, SWT.PUSH);
enter.setText("No action");
gridData = new GridData(GridData.HORIZONTAL_ALIGN_END);
gridData.horizontalSpan = 3;
enter.setLayoutData(gridData);
enter.addSelectionListener(new SelectionAdapter() {
public void widgetSelected(SelectionEvent event) {
     shell.open();
     while (!shell.isDisposed()) {
          if (!display.readAndDispatch())
               display.sleep();
     display.dispose();
if (dogImage != null) {
dogImage.dispose();
}

BASIC Questions about JavaMail

Hi Everyone
I have some very basic questions about java mail.
I have a weblogic web server. I think it's version 5 or something like that.
when a user clicks a form on my application sends some information to my database (via my jsp/java program) , I need to send email to a person?
Does anyone know how to do that ?
Could someone please describe the process
Stephen

I would recommend that you first read the JavaMail design specifications http://java.sun.com/products/javamail/JavaMail-1.2.pdf
Then, download JavaMail. It comes with a reference implementation of the API and also very good samples.
Those samples should get you started very quickly on how to send email from Java program.

I have a question about japan new depriciation engine using non-japanese chart of deprication

Hi, all
I have a question about link between new depriciation engine and chart of depriciation.
My client want to use US chart of depriciation as standard chart of depriciation becuase it has already standard setting like IAS deprication keys.
it means I have to create Japanese chart of depriciation by copying from US chart of depriciation(non-japanese sample(0JP))
I have a little doubt about it. In my previous project, I copyed chart of depriciation by copy from Japan sample Chart of depriciation(0JP) stored in SAP.
Is it possible to copy from non-japan sample charg of depriciation to using Japanese new depriciation engine? I worried some errors will occrues if I do not use sample chart of depriciation(0JP) .
If I need to use sample Japanese chart of depriciation, please give me the idea why I need to use Japanese sample chart of depriciation. I want to know the examples of non-Japanese asset accouting consultants who have working experience in the area.
Thank you.

Hi, Narasimhulu
Thank you for your support.
My client use one COA to all over the world. And not only Japan, other country aslo use the COD which is copied from that of US. Basic reporting line is for USGAP. I will customize 2 depriciation ares, one for US GAP and another is JGAP. No need to create TAX realted customize. It means it enought only adding Japanese new depriciation keys to Current US COD. No need to add more Japanese local requirements.
In this case, I want to know follwoing point.
I know COD controll depriciation keys, but I want to know more detail about COD, what kinds of controls COD do. What is Japanese local requirements. Why better to use COPY of JP COD.
Thank you.

Question about VacationRequest sample

Similar Messages

Maybe you are looking for