Question about version SAp Mobile Infraestructure

Good morning,
Actually we have using the version of Sap Mobile Infraestructure MI 25 SP 22 Patch 02 Build 200901191055
Do we want to know if exist some last version or SP of the Sap Mobile Infraestructure MI 25?
Thanks
Regards
Fernando

Hi,
Now, the latest available version of SAP Mobile Infrastructure is 7.1 with EHP1.
For MI 7.1, go to:
service.sap.com/swdc -> SAP Installations & Upgrades -> Installations & Upgrades - Entry by Application Group -> SAP Netweaver -> SAP Netweaver -> SAP Netweaver Mobile 7.1 -> Installation .
If you want to install MI 7.1 with EHP1, go to:
service.sap.com/swdc -> SAP Installations & Upgrades -> Installations & Upgrades - Entry by Application Group -> SAP Netweaver -> SAP Netweaver -> SAP EHP1 for SAP NW PI 7.1 -> Installation and Upgrade.
The same installation DVDs are required to install both PI 7.1 EHP1 and MI 7.1 EHP1.
Read the installation guides at service.sap.com/instguides and it will clarify any further doubts that you may have.
Thanks,
Shitij

Similar Messages

Question about Managing SAP ERP 6.0 Upgrade Projects

Hi experts,
Some questions in this link(google: Managing SAP ERP 6.0 Upgrade Projects and download PDF)
http://www.google.com.tw/url?sa=t&rct=j&q=Managing_SAP_ERP_60_Upgrades_SAP_PRESS_sample&source=web&cd=4&ved=0CDgQFjAD&url=http%3A%2F%2Fmedia.techtarget.com%2FsearchSAP%2Fdownloads%2FManaging_SAP_ERP_60_Upgrades_SAP_PRESS_sample.pdf&ei=vTsVT7PKI4T6mAXL0czcAw&usg=AFQjCNFq83vYG3k14xC5tcoYy96PfllYFw
1. Is figure 5.3 in page 165 correct?
I think it should be
Temporary system: DEV 6.0
Productive system: DEV' 4.6C -> QAS 4.6C -> PRD 4.6C
2. Is this transport route possible?
"During this phase, you continue dual maintenance of the development
systems. You also transfer changes that you make in DEV' to DEV, and
transport changes to both quality assurance systems."
DEV' 4.6C -> DEV 6.0 -> QAS 6.0 -> QAS' 4.6C
If we modified some standard programs and transport between two different SAP versions, I think the programs can't work, right?

> 1. Is figure 5.3 in page 165 correct?
> I think it should be
> Temporary system: DEV 6.0
> Productive system: DEV' 4.6C -> QAS 4.6C -> PRD 4.6C
>
> 2. Is this transport route possible?
> "During this phase, you continue dual maintenance of the development
> systems. You also transfer changes that you make in DEV' to DEV, and
> transport changes to both quality assurance systems."
> DEV' 4.6C -> DEV 6.0 -> QAS 6.0 -> QAS' 4.6C
> If we modified some standard programs and transport between two different SAP versions, I think the programs can't work, right?
Here, you need to do manual replication between both development system. No transport is possible because of different versions. I am not sure about the document that you posted but same is explained very well in upgrade guide. Please check there.
Thanks
Sunny

Question about versioning (history) in the latest release

Hallo,
Some questions:
1. Will versioning ever be integrated with locked pages, locked scene, colored pages, revision marks functionality etc, so that at a particular moment you can optionally augment the current versioning with the more traditional way of production revision cycles?
2. If above will not be the case (or is never activated): what currently happens with scene numbers & manual breakdown info that is already added, but than the scene gets deleted. Is all this info gone (& scenes renumbered). Can we save a version to keep this info? Please clarify.
3. Regarding breakdown of elements: will there be a way that we can visualize breakdown sheets on screen. It's much easier for me to look at it that way, e.g. the Scenechronize way (I guess I'm old).
4. Regarding breakdown and making the script 'production ready', will there be a way to combine scenes that belong together and part scenes (that are not in the same shooting location but where the writer chose to combine the action in one scene, eg like telephone conversation etc).
I guess all my questions boil down to this: will Story also aim to offer serious production breakdown features that could be used by production managers & assistant directors to prep for physical production, or will it mainly be a collaborative writing tool (even if it does allow you to transfer text into On Location shotlists and then eventually into your clips).
I guess there's a conceptual difference (at least when talking about narrative film with a lot of cast, locations, props etc): do you support mainly the writing effort and than transfer into a tool like Scenechronize once production starts - or do you go further? For (corporate) interview type shoots this matters less.
I would be interested to hear your views on the matter.
Regards,
Bavo

Yes. Versioning will be integrated with locked pages, colored pages but we are not planning to lock scenes yet. We will also show asterix against changed lines in future updates.
You can always explicitly save a version (file->save as) to mark a checkpoint draft. You can add your own comments while saving this draft so that you can find it later.
We'd like to support production related features because we want to leverage script metadata for all it can be leveraged for. That said, "full fledged" is a loaded term. We will take small steps and enable workflows related to production as we go along. Dynamic breakdown reports, that can be viewed and edited in Story are on our roadmap.
--Anubhav

Question about Dreamweaver Native Mobile Apps with PhoneGap

I am trying to determine the best way to build an app for my business. It doesn't need to be anything fancy, but needs a clean UI that is easy to navigate and interfaces with an online database. The PhoneGap intergration with Dreamweaver 5.5 seems really intriguing, but before I spend the $650 to upgrade my creative suite, I had some questions.
Doing some research, I have found multiple references to apps created in this way running slowly. Noticable lapses on button pushes, pages loading slowly, etc. Is this an issue and if it is, is there any way to get around it?
Idealy, I would deploy my app to both Android and iOS devices, how smoothly does that run? I have some basic knowledge of both Java and Objective-C, but using dreamweaver seems to be quite a timesaver.
If anyone has any input or comments about using Dreamweaver to create native mobile apps I would love to get some feedback. Thanks!

PhoneGap builds mobile apps with HTML, CSS, and JavaScript. You cannot use a server-side language, such as PHP, with PhoneGap.
Presumably, you want to connect with a MySQL database on a remote server. To do so, you would need to use Ajax to send and receive data from the MySQL database. You can use jQuery to send and receive data as JSON. PHP has JSON functions that decode and encode data as JSON strings.
How difficult or easy you would find setting this up depends on your knowledge of jQuery and PHP. I don't know of any tutorials that show how to pull everything together for PhoneGap, but it shouldn't be too difficult to find tutorials for using jQuery Ajax to communicate with MySQL.

Questions about moving from Mobile Me to iCloud

I just upgraded my iPhone to iOS5 and am curious about the move to iCloud for my mobileme account. I know there are articles out there, but they seem very generic and do not put my fears to rest.
Here are my questions and concerns. I figure they will be easy for a lot of you to answer, but I need to pose them before I make the jump.
1.) Do I need Lion to move to iCloud? (from the articles I read I'm pretty sure the answer is yes, but I thought I'd clarify)
2.) I have more than one mobileme account that has calendars and mail synced on my computer. If I upgrade one account do I have to upgrade the other at the same time for iCal and Mail to work?
3.) My husband's mobileme account syncs his work calendar. It is very important that I don't lose his information and that his calendar works flawlessly after the upgrade. Has anyone run into problems with the calendar syncing? I will not move anyone's accounts if iCloud is still experiencing a lot of bugs. I will of course make a backup copy of his calendar before upgrading, but his calendar changes often and is synced to two iMacs, a Macbook Pro, Mac Mini, an iPad and an iPhone it will not be practical to keep track of his calendar and if it is syncing properly.
4.) How do I actually make the switch to iCloud once I make up my mind to do it? My Phone told me to sign into me.com to do this, but when I signed in I didn't see how to say that I wanted to use the iCloud. Maybe this is because I haven't upgraded to Lion yet?
Thanks!

I am curious about the comment you can only use one iCloud account at a time. Right now I have my moblieme calendar and my husband's mobileme calendar both visible in iCal. That is very convenient for us because then he doesn't have to open up a separate user on the iMac just to check his calendar (this is our home computer that is mainly mine). Are you telling me that I won't be able to use both CalDAV accounts in iCal anymore? Will it force me to use only one?
Most of our music and videos was purchased under my .mac account, so iTunes isn't a problem, but we like to share one user on the computer and still be able to see both our calendars and e-mail.

VCDX-DT Question about versions

Hello,
The current VCDX-DT is for version 5.x
I would like to know whether the section in the Blueprint which outlined the 'Desktop Management Components' namely, "VMware Horizon View, VMware® Horizon Mirage™, VMware® Horizon Workspace™, VMware® vCenter™ Operations Manager™ for Horizon View, vCenter"
Does this mean only versions related to 5.x are only applicable? Therefore, vCenter 6.x, vRealize Operations Manger 6.x would not be valid considerations, etc?
I am just trying to clarify what's the cut off point.
Thanks in advance.

Thanks for the quick response.
So I guess my only follow up question is, and I plead some ignorance to the defense process, could you hear questions from the panel such as "Why did you opt for v5.3 instead of 6.1 and couldn't this feature set within v6.1 have been an option?"
Of course if you were only prepared for v5.3 questions you would be caught flat-footed.
So, in the end I am asking despite it being VCXD5, defense or challenge questions COULD come from newer versions?
Thanks.

A question about version of JDK

hello!
My cpu is Turion x64 TL-50,but I use WinXp sp2 (32bit-version)
then which jdk shall i download?windows-i586 or windows amd-64?
jdk's version depends on os only?

yep, 32 bit software normally run on 64 bit cpu (not XP 64 bit, the environment) unless ur using win 64.

Question about version based downloads

How does the jnlp-servlet know where different versions of a jar are? Does it look through the entire web directory for version.xml files and keeps a list? I am asking because I don't really understand what steps would be involved when I needed to create an update to my application that was previously deployed with jnlp.
If someone could just explain how they would setup an update using the following scenario. I have an application with two jar files (one.jar and two.jar). There is a new release of my software and only the two.jar had changes. What would my old jnlp file look like and what would the new jnlp file look like? What would the directory structure look like now that I need to maintain the old two.jar around for incremental updating (i.e. jarDiff)?
Lance

see:
http://java.sun.com/products/javawebstart/1.2/docs/downloadservletguide.html
if all resources are the for the same os, arch, and locale, you would put them on the web as
<codebase>/one__V1.0.jar
<codebase>/two__V1.0.jar
<codebase>/two__V1.1.jar
old jnlp file would have:
<jar href="one.jar" version-id="1.0"/>
<jar href="two.jar" version-id="1.0"/>
updated version jnlp file would have:
<jar href="one.jar" version-id="1.0"/>
<jar href="two.jar" version-id="1.1"/>
/dietz

A question about the SAP Demo Example: OfficeControl in WebDynpro ABAP

Hello Experts,
I find some examples about WDA UI Element "OfficeControl" in packet SIOS. But some standard functions of Word are deactivated.
e.g in the following screenshots, MailMerge function is deactivated.
[screenshot|http://picasaweb.google.com/meerwu/DropBox?authkey=Gv1sRgCJy33JuwwsSVDQ#5390235805723698882]
Do you know, is it possible to activate all the word functions inside WebDynpro?
Many thanks!
meer
Edited by: Meer Wu on Oct 8, 2009 4:35 PM
Edited by: Meer Wu on Oct 8, 2009 4:36 PM

Any inputs?

Question about Associate SAP HR certification

Hii All,
I am thinking of taking Associate SAP HR certification. I actually took a training for 6 weeks. Is it possible to take the exam without work experience. Do i need work experience to take the certification. Is the certification worth taking to land a job?
I appreciate any reply.
Thanks

Hi vimal,
definetely you can take the certification, and it will help you to fetch a job but domain experieince will be added advantage
regards,
ram

General Question about SAP Documentation. Where to find?

Hello,
I am relatively new in the SAP business and so I have some general questions about the SAP Documentation.
Often internet-links like
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIBP/FI-AP-AP-PT.pdf
are posted here by group members.
But where do these group members find these documents?
All I can see at help.sap.com is IDES (the model company created by SAP)and the WWW-version of the SAP-Bibliothek.
Were can I find these PDF-Files?
I would appreciate any hint and tip!
Thank you!
Kakue

thats true! i dont know how to find either. Everytime i need something i ask on the forum.
Here's a good link
http://www.easymarketplace.de/online-pdfs.php
Plz reward points if helpfull

Question about RV_BILLING_PRINT_VIEW

Hi all,
this question is related to a post I created yesterday but is a more General question about this SAP Function Module, hence I'm posting in ABAP General.
(yesterdays post: Invoice line items - inconsistant data returned from RV_BILLING_PRINT_VIEW)
The FM RV_BILLING_PRINT_VIEW is used in the standard invoice program to bring back line item data for the invoice.
Arising from an issue yesterday, I investigated further and found that this FM does not bring back Ship-to data (LAND_WE etc.) for the first line of invoice items, for all invoices that I have tested. All remaining line items are correct. (I've tested a number of examples and found this to be the case, using different output types, partner functions etc.)
I have verified that Ship-to is correctly maintained in VF03.
Also, from debugging RV_BILLING_PRINT_VIEW, I can see that the first line item is treated differently than the rest:
for example: LINE 304
IF lvbdpr-pospa NE pospa_erste_position
(If not first position)
Is this something simple that I am missing?
Can anyone offer a suggestion as to why the first line of the returned table is not being fully filled by this FM.
Thanks in advance,
David.

Use SAP Note 724354 - DP90: Information from contract instead
of sales document

Question about SAP Router Version

Hi All,
I have a question about SAP Rotuer. How can I check what is my sap router version?
I plan to upgrade my sap router to version 23 because It can monitor by windows services.
Does any one know about this ? Please kindly explain.
Thank you & Regards,
Vipu

Go to saprouter directory in command prompt cd :\usr\sap\saprouter
> type saprouter -v
You can see result like below
SAP Network Interface Router, Version 38.10
compiled Mar 1 2010 01:38:53
start router : saprouter -r
stop router : saprouter -s
soft shutdown: saprouter -p
router info : saprouter -l (-L)
new routtab : saprouter -n

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off.

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off. never had this trouble with my 3...I don't even want to talk to anyone on this phone! Is the sensor bad? That is what the AT&t rep suggested.

Restore as new... if the problem still continues then there is a hardware issue.
If it stops after a restore as new, then the issue is with the backup the device is currently setup with.

Some question about SAP CRM consultant

Dear all,
      I'm a center-based consultant in china.Our company is among the first batch to run SAP CRM in china in 2006.Our version is CRM 5.0.From my two years' working experience,the status of using CRM in our company is not very good.Complex UI,sychrorize problem makes our partner not willing to use this system.
     I used to do some ABAP developing then i began to transfer to MM&SD.CRM work is the recent thing.During some months' work in CRM,i found i am more interesting in CRM.
    I want to find a new job in outside consulting company in future.I want to focus on CRM.One aspect is that i'm interested in CRM.The other is that CRM is a new product and there is not so many people doing this.However,i seems getting some worries.First,SAP CRM seems not quite mature just from my understanding in 5.0 version.We need to develope a lot not just using User-exit.I don't know whether 7.0 has changed a lot.I've seen the UI of 7.0.It seems much better.But is it means more company will choose SAP CRM 7.0 other than Siebel?In china,there seems not many CRM projects now and i don't know the status in other countries.Second,CRM may have much differences from ERP implementation because there are many process which can't be solidified.
   In one word,i'm worried about CRM consultant's future.And i hope gurus to give me the answers.THx.

Hi Feng
It would be very intersting to clients as well as consultants to work on SAP CRM. Career wise you have ample opportunities in the same. With the advent of various features in CRM 7.0 version, SAP is now more user friendly and is easy to implement with lot many processes covered as a part of vanila offer.
I wish you all the best and hope this helps.
Regds,
Raghu

Question about version SAp Mobile Infraestructure

Similar Messages

Maybe you are looking for