Question about Virtual Surro

Does the XFI CMSS-3D feature create a virtual surround using the multitrack audio information. Or does it create an expanded sound stage from the stereo track of the file?What are the settings needed to get true virtual surround over headphones?

I had my sound options set to headphones, naturally as I was using headphones. However I tried selecting 5. speakers and running the speaker test. Rear channels really sound like they're behind me although not stereo. Both LR and RR sound like there coming from the same place. Tried running a movie with a 5.. soundtrack and it sounded great.

Similar Messages

Software license question about Virtual PC 2007

Hi All,
I have craeted a virtual PC (Win XP) on my Win 7 PC virtual PC 2007. This virtual PC have installed crystal report 10. My question is, if I create another virtual PC (Win XP) on my Win 7 PC virtual PC 2007 and also install the crystal report 10. Does
I need to purchase another software license for the new one?
Best Regards,
Kenneth Lam

Microsoft does not provide support for the Crystal Reports products because Crystal Reports are SAP products, （http://support.microsoft.com/kb/317789）and we're not familiar with the license issue of this
product, I think you might need help in this SAP products support forum
http://scn.sap.com/community/support
Thanks for your understanding.
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Question about Virtual Machine learn repositories

Hello everybody,
I'm interested to learn OBIEE repositories. Everyone know a virtual machine to learn repositories, I'm learning dashboards and reports with Oracle Business Intelligence EE 11g (OBIEE 11g) image virtual v107. Where could I search training about repositories?
Kind regards
Carlota Viña Sirgo

Check this
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/biadmin11g_02/biadmin11g.htm
Mark as correct if it is helpful
Thanks.

Hyper-V: Questions about Virtual Switches

Hello,
This question concerns a computer running Windows 8 Pro.
Using Hyper-V, I have created a virtual machine running Windows XP Pro. (we must use it to run a very old CAD program so that we can access our legacy drawings from years ago)
I am not concerned with Internet access for the virtual machine; I just want it to connect to our LAN.
Anyway, so far, so good; I created an external virtual switch, and it works just fine. However, I have noticed that the virtual switch "takes over" the computer's physical NIC. This is making network access from other computers to
this machine very, very slow. (it has other functions in this office)
So, I tried changing the virtual switch to either Internal or Private. This "released" the physical NIC and greatly sped up access to the physical machine, but now I cannot access the LAN from "inside" the virtual machine.
So, my questions are:
1. How do I access the LAN with a virtual switch that is set to Internal or Private? Is that possible?
2. If not.... if I added a second physical NIC to the computer just for the virtual switch, would that work?
Thanks in advance,
-Kevin

1. How do I access the LAN with a virtual switch that is set to Internal or Private? Is that possible?
Not possible. Internal is local to the hardware. Private is local to the VMs that are being managed only.
2. If not.... if I added a second physical NIC to the computer just for the virtual switch, would that work?
Yes, this is one solution.
The other solution is most likely to tune the driver settings of the physical NIC. Disabling the multiple TCP Task offloading options.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will.

Question about Virtual Hosts with Apache 2

Hi,
I have a mac mini with 10.5.4 and I was wondering if it is possible to host two websites on this one computer. What I mean by this is I have an ip address 12.34.56.78 that points to the mac mini.
I also have two domain names, say example1.com and example2.com, each with total DNS control. Is it possible to point both domains to 12.34.56.78 and have different pages show. For example when example1.com is loaded, the file /Library/WebServer/Documents/example1/index.html is loaded. When example2.com is loaded, /Library/WebServer/Documents/example2/index.html is loaded.
I have tried to do this with virtual hosts, but I can't seem to get it to work. I seem to have permission problems with apache 2 and I get the forbidden error.
If anyone knows if this is possible, and how to do it that would be of great help. Thanks.

Awesome, thanks David! I look forward to reading this. I've
just been
"dealing" with it. :O)
Jon
"David Powers" <[email protected]> wrote in message
news:elh9uq$el0$[email protected]..
>I have written a short tutorial on setting up virtual
hosts in Apache 2.2
>on Windows. I wrote it as an update for readers of
"Foundation PHP for
>Dreamweaver 8", but it contains full instructions, so
doesn't require a
>copy of my book to be able to follow it.
>
>
http://foundationphp.com/tutorials/apache22_vhosts.php
>
> --
> David Powers, Adobe Community Expert
> Author, "Foundation PHP for Dreamweaver 8" (friends of
ED)
> Author, "PHP Solutions" (friends of ED)
>
http://foundationphp.com/

A few questions about my MacBook Pro?

Hey guys, I have a few questions about Virtual Machines and a few other random questions.
1. Which one is the most "complete" in its features when compared to a plain install of Win. 7?
2. Which VM should I purchase?
I have a 15" late 2012 MacBook Pro with a 2.6 ghz intel i7, 16gb ram and a 256gb SSD. (I was planning on running it off of an external hard drive— if that is possible)
3. I have 206.12 GB of 255.2 GB free— should I just use boot camp instead?
4. If I use Boot Camp, do I have to delete the data that's on my Mac currently to install Win. 7 or can I partition my current drive and keep my data?
5. What is the "other" data that's taking up 25.51 GB of space on my SSD? (I have the same problem on my iPhone, but that's a different problem.)
Thank you very much.

You posted your Boot Camp questions in the MacBook Pro forum. Try asking in the Boot Camp forum where the Boot Camp gurus hang out. https://discussions.apple.com/community/windows_software/boot_camp

Questions about Indexing and Using an Indexing POA

Although I have only about 50 users, at least 15 of them have in excess of 100,000 messages in their accounts and the POA (version 7.0.2) is regularly slowing to a crawl. (I just know that plans for revolution are fomenting!) I have embarked on a campaign to reduce these accounts by archiving everything off to get mail accounts down to 3000 or fewer pieces. I have achieved user buy-in, but have worked on only a few users so far.
In another closely related thread, it was suggested to me that the PO speed issues relate to broken indexes. And I suspect that given so many messages, the indexes were never getting fully rebuilt with the default QF POA settings. I am trying to fix that situation in addition to reducing mail account sizes. So, I have set up a second POA on another server and dedicated it to the indexing task. The /qfinterval is set for 1 hour, other /qf switches at default. The POA-QF does no mail delivery, but it does do nightly user upkeep.
The POA-QF seems to be steadily working away and making progress at reducing the number of unindexed messages. However, I have questions about what I am seeing and what more I can do:
1. Is the progress I am seeing real progress? For example I have a user with over 100,000 messages to be indexed and every time I check the logs, the count drops by about 500 messages per hourly QF cycle. I assume that if I just let it keep running, it will eventually get caught up and fixed. Not only with this user, but with all the others as well. Will my patience (and theirs) be rewarded? Are there any gotchas I need to prepare for?
2. One user has recently had virtually all of her messages successfully moved to archive. I can see them in the Archive, and do not see them in the online account. However, now over a week later, QF still shows >130,000 items still left to index for that user. The POA-QF is making slow, steady progress reducing that number, but why is this user's QF count still so high? Does it just need more time, or is there something amiss for this user?
3. I may want to rebuild indexes for single users from scratch. I have seen the TID 3105742 which tells how to do this: Essentially you turn off mail delivery functions, and make some other switch changes to dedicate the POA to indexing for just a single user, and then you let the POA rebuild the indexes. The implication of that scenario is that the POA is now enjoying exclusive access to the user's databases.
If I want to use my secondary POA-QF to rebuild a user's index from scratch, does the main POA have to be offline and the user out of GWise? That is, Does the QF process require exclusive access in order to rebuild indexes from scratch?
Thanks for any thoughts or suggestions.
Peter Smick

pgsmick wrote:
> 1. Is the progress I am seeing real progress? For example I have a user with
> over 100,000 messages to be indexed and every time I check the logs, the count
> drops by about 500 messages per hourly QF cycle. I assume that if I just let
> it keep running, it will eventually get caught up and fixed. Not only with
> this user, but with all the others as well. Will my patience (and theirs) be
> rewarded? Are there any gotchas I need to prepare for?
Set this switch for this indexing POA - /qflevel=999 - this will index
everything in one run. It will take a long time, but with no qflevel switch you
are indeed only indexing 500 messages at a time, and if the user has that much
mail, it might never really catch up.
>
> 2. One user has recently had virtually all of her messages successfully moved
> to archive. I can see them in the Archive, and do not see them in the online
> account. However, now over a week later, QF still shows >130,000 items still
> left to index for that user. The POA-QF is making slow, steady progress
> reducing that number, but why is this user's QF count still so high? Does it
> just need more time, or is there something amiss for this user?
>
This is odd, because really the index count should drop to nothing, but with the
above switch this might get resolved as well.
> 3. I may want to rebuild indexes for single users from scratch. I have seen
> the TID 3105742 which tells how to do this: Essentially you turn off mail
> delivery functions, and make some other switch changes to dedicate the POA to
> indexing for just a single user, and then you let the POA rebuild the indexes.
> The implication of that scenario is that the POA is now enjoying exclusive
> access to the user's databases.
Not really - the POA is not enjoying exclusive access to the user's database,
the indexer is just avoiding an attempt to index anything else.
> If I want to use my secondary POA-QF to rebuild a user's index from scratch,
> does the main POA have to be offline and the user out of GWise? That is, Does
> the QF process require exclusive access in order to rebuild indexes from
> scratch?
No - QF never requires exclusive access. That said, you may find that an
extremely vigorous QF can cause slowdowns for the user.
Danita
Novell Knowledge Partner
Moving GroupWise to Linux?
http://www.caledonia.net/gwmove.html

Question about Kurts comments discussing the seperation of AIA & CDP - Test Lab Guide: Deploying an AD CS Two-Tier PKI Hierarchy - Kurt L Hudson MSFT

Question about the sentence in bold. What is the meaning behind this comment?
How would you separate the role of the AIA and CDP from a CA subordinate server? I can see where I add a CES and CEP server which has those as well, but I don't completely understand his comment. Because in this second step, (http://technet.microsoft.com/en-us/library/tlg-key-based-renewal.aspx)
he shows how to implement CES and CEP.
This is from the guide located at: http://technet.microsoft.com/library/hh831348.aspx
Step 3: Configure APP1 to distribute certificates and CRLs
In the extensions of the root CA, it was stated that the CRL from the root CA would be available via http://www.contoso.com/pki. Currently, there is not a PKI virtual directory on APP1, so one must be created.
In a production environment, you would typically separate the issuing CA role from the role of hosting the AIA and CDP.
However, this lab combines both in order to reduce the number of resources needed to complete the lab.
Thanks,
James

My concern is, they have a 2-3k base of xp systems, over this year they are migrating them to Windows 7. During this time they will also be upgrading hardware for the existing windows 7 machines. The turnover of certificates are going to be high, which
from what I've read here, it worries me.
http://blogs.technet.com/b/askds/archive/2009/06/24/implementing-an-ocsp-responder-part-i-introducing-ocsp.aspx
The application then can go to those locations to download the CRL. There are, however, some potential issues with this scenario. CRLs over time can get rather large
depending on the number of certificates issued and revoked. If CRLs grow to a large size, and many clients have to download CRLs, this can have a negative impact on network performance. More importantly, by
default Windows clients will timeout after 15 seconds while trying to download a CRL. Additionally,
CRLs have information about every currently valid certificate that has been revoked, which is an excessive amount of data given the fact that an application may only need the revocation status for a few certificates. So,
aside from downloading the CRL, the application or the OS has to parse the CRL and find a match for the serial number of the certificate that has been revoked.
With the above limitations, which mostly revolve around scalability, it is clear that there are some drawbacks to using CRLs. Hence, the introduction of Online Certificate
Status Protocol (OCSP). OCSP reduces the overhead associated with CRLs. There are server/client components to OCSP: The OCSP responder, which is the server component, and the OCSP Client. The OCSP Responder accepts status
requests from OCSP Clients. When the OCSP Responder receives the request from the client it then needs to determine the status of the certificate using the serial number presented by the client. First the OCSP Responder determines if it has any cached responses
for the same request. If it does, it can then send that response to the client. If there is no cached response, the OCSP Responder then checks to see if it has the CRL issued by the CA cached locally on the OCSP. If it does, it can check the revocation status
locally, and send a response to the client stating whether the certificate is valid or revoked. The response is signed by the OCSP Signing Certificate that is selected during installation. If the OCSP does not have the CRL cached locally, the OCSP Responder
can retrieve the CRL from the CDP locations listed in the certificate. The OCSP Responder then can parse the CRL to determine the revocation status, and send the appropriate response to the client.

A few questions about MacBooks and Parallels Desktop.

I have a few questions about MacBooks and Parallels Desktop.
1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
Thanks
Keith

1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
Remember to leave at least 2 or 3 Gb for virtual memory usage.
3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
Good Luck

Basic questions about programing for J9 VM

I need to create a java application to run on a Pocket PC 2003 OS and I'm limited to using IBM's Websphere J9 Virtual Machine. I'm new to using java in this capacity and therefore have lots of questions which I'm guessing are pretty basic. Despite my best efforts, I've found very little to help me online. Below are a couple questions I have that I'm hoping someone can help me with. Even better, if you know of any resources that could help me with these and other questions, I'd love to have them. Thanks in advance.
1. I'm using standard AWT for the GUI but I'm having problems getting frames, dialogs, etc., to come up in anything less then full screen. setSize() and resize() have no effect, even if I extend the frame and override the setMinimumSize, setPreferredSize, setMaximumSize methods. What do I need to do to get a child window to appear in something less than full screen?
2. I'd like to be able to add menu's to the buttom toolbar (with the keyboard) but have no idea how I would add something to it. Can someone point me in the right direction?
3. When my application gets an iconified event I go ahead and call a System.exit() to exit the application. This doesn't kill the java VM though, which continues to run in the background (taking up plenty of memory). If I run my application using the J9w.exe so that it runs without the console, then not only does the VM continue to run, but I have no way to stop it (the running program list can't see it). Since each time I run my application it starts a new VM, it only takes a couple of times before I'm out of memory and have to do a soft reset of the PDA to make things right. Can I kill the VM when I kill my application?
4. I learn best by looking at example code, but have been unable to find any code people are running on J9. I have the GolfScoreTracker installed and running on my PDA, but the jar file contains only the classes. Since it's supposed to be a demo, I had hoped that the source code would be included, is that hoping too much or is the source code available somewhere? In addition, if you know of any applications out there with available source code that are known to run well on a PocketPC J9 environment I'd appreciate the link.

Hi there, I saw your questions, im currently developing a java pocket pc application as well and here's what i go so far:
AWT seem to be hard to use on pocket pc, instead i recommend that you use SWT, which is a technology developed by eclipse. It's already installed on the eclipse plugins, you just need to download the jar and dll files for the pocket pc. They are available at: http://www.eclipse.org/downloads/index.php
I assume that you already have the J9 working on your device. So you only need to copy the SWT.jar file and the swt-win32-3064.dll to the folder containing the .class files on your device.
Now, on your java IDE(im using eclipse) Add the SWT.jar library to your project which should be on C:/eclipse/plugins/org.eclipse.swt.win32_3.0.2/ws/win32/swt.jar or something like taht depending on your eclipse root.
Now you are ready to code some SWT, here is a sample program from Carolyn MacLeod, i modified a few things so it could run on the pocket pc but it's almost the same. Once you coded in eclipse run it, then copy the class file from your desktop to your device(There should be like 4 or 5 classes like sample.class, sample$1.class etc. copy all of them) where you put the jar and dll files(If program does not run you may try to rename the dll file for swt-win32-3050.dll instead of 3064.dll). Now after you have everything set up you need to create the lnk file in order to run the program. On your desktop create a new textfile and write the following on it:
255#"\Archivos de Programa\J9\PPRO10\bin\j9w.exe" "-jcl:PPRO10" "-cp" "\My
Documents\Java\swt.jar" ;\My Documents\Java" sample
Paths depend on your install, and the place where you put your classes and jar file. path for j9w is usually "\Program Files\J9\PPRO10\bin\j9w.exe", and the last word should be the classname.
Currently this form only displays an image on a canvas, click on the browse button and choose a pic and it will display on the canvas. Im trying to connect the form to an oracle database but no success yet on the device.
Hope it helps, if you have any questions about the code or something, and I know the answer, please feel free to ask.
See ya
import org.eclipse.swt.*;
import org.eclipse.swt.widgets.*;
import org.eclipse.swt.layout.*;
import org.eclipse.swt.events.*;
import org.eclipse.swt.graphics.*;
public class sample {
static Shell shell;
static Display display;
static Text dogName;
static Text textdb;
static Combo dogBreed;
static Canvas dogPhoto;
static Image dogImage;
static List categories;
static Text ownerName;
static Text ownerPhone;
static String[] FILTER_EXTS = {"*.jpg"};
public static void main(String[] args) {
display = new Display();
shell = new Shell(display, SWT.RESIZE | SWT.CLOSE);
Menu menu = new Menu(shell, SWT.BAR);
shell.setText("Dog ShowS Entry");
shell.setMenuBar(menu);
GridLayout gridLayout = new GridLayout();
gridLayout.numColumns = 3;
shell.setLayout(gridLayout);
new Label(shell, SWT.NONE).setText("Dog's NameS:");
dogName = new Text(shell, SWT.SINGLE | SWT.BORDER);
GridData gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL);
gridData.horizontalSpan = 2;
gridData.widthHint = 60;
dogName.setLayoutData(gridData);
new Label(shell, SWT.NONE).setText("Breed:");
dogBreed = new Combo(shell, SWT.NONE);
dogBreed.setItems(new String [] {"Collie", "Pitbull", "Poodle", "Scottie"});
dogBreed.setLayoutData(new GridData(GridData.HORIZONTAL_ALIGN_FILL));
Label label = new Label(shell, SWT.NONE);
label.setText("Categories");
label.setLayoutData(new GridData(GridData.HORIZONTAL_ALIGN_FILL));
new Label(shell, SWT.NONE).setText("Photo:");
dogPhoto = new Canvas(shell, SWT.BORDER);
gridData = new GridData(GridData.FILL_BOTH);
gridData.widthHint = 60;
gridData.verticalSpan = 3;
dogPhoto.setLayoutData(gridData);
dogPhoto.addPaintListener(new PaintListener() {
public void paintControl(final PaintEvent event) {
if (dogImage != null) {
event.gc.drawImage(dogImage, 0, 0);
categories = new List(shell, SWT.MULTI | SWT.BORDER | SWT.V_SCROLL);
categories.setItems(new String [] {
"Best of Breed", "Prettiest Female", "Handsomest Male",
"Best Dressed", "Fluffiest Ears", "Most Colors",
"Best Performer", "Loudest Bark", "Best Behaved",
"Prettiest Eyes", "Most Hair", "Longest Tail",
"Cutest Trick"});
gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL | GridData.VERTICAL_ALIGN_FILL);
gridData.widthHint = 60;
gridData.verticalSpan = 4;
int listHeight = categories.getItemHeight() * 12;
Rectangle trim = categories.computeTrim(0, 0, 0, listHeight);
gridData.heightHint = trim.height;
categories.setLayoutData(gridData);
Button browse = new Button(shell, SWT.PUSH);
browse.setText("BrowsePic");
gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL);
gridData.widthHint = 60;
browse.setLayoutData(gridData);
browse.addSelectionListener(new SelectionAdapter() {
     public void widgetSelected(SelectionEvent event) {
          FileDialog dialog = new FileDialog(shell, SWT.OPEN);
          dialog.setFilterExtensions(new String[] {"*.*"});
          String fileName = dialog.open();
if (fileName != null) {
dogImage = new Image(display, fileName);
shell.redraw();
Button delete = new Button(shell, SWT.PUSH);
delete.setText("No action");
gridData = new GridData(GridData.HORIZONTAL_ALIGN_FILL | GridData.VERTICAL_ALIGN_BEGINNING);
gridData.widthHint = 60;
delete.setLayoutData(gridData);
delete.addSelectionListener(new SelectionAdapter() {
public void widgetSelected(SelectionEvent event) {
Button enter = new Button(shell, SWT.PUSH);
enter.setText("No action");
gridData = new GridData(GridData.HORIZONTAL_ALIGN_END);
gridData.horizontalSpan = 3;
enter.setLayoutData(gridData);
enter.addSelectionListener(new SelectionAdapter() {
public void widgetSelected(SelectionEvent event) {
     shell.open();
     while (!shell.isDisposed()) {
          if (!display.readAndDispatch())
               display.sleep();
     display.dispose();
if (dogImage != null) {
dogImage.dispose();
}

A question about BC 400 training program

Dear all,
I have a question about SAP taining program for ABAP. My manager will soon register me for the training program BC 400, which seems to be the start point for those who don't know anything about ABAP. I was looking at the course description page and I saw that the course is provided as VLC (Virtual Class). As I understood is that the student connects from his workstation to the training center, so it is distant training program.
I think it would be more interesting for me to be directly in the classroom with teacher face-to-face.
Therefore, my qestion is the fact that a training program is VLC, does it mean that it is no more possible to attend directly in classes ? or is just for those who may not want for some reason attend directly to the class?
Thanks in advance,
Dariyoosh
Moderator message: moved to S & C.
Edited by: Thomas Zloch on Sep 6, 2010 2:33 PM

This is forum for general abap problems.but to answer your question
check this link from sap site
http://www.sap.com/usa/services/education/tabbedcourse.epx?context=[[|bc400||1|063|us|]]|
Thanks
Bala Duvvuri

N00b question about the ABS

Hey, I am new to Arch and I'm about to install it on my machine (used it a bit in a virtual machine) and I have a small nooby question about the ABS.
According to the wiki: https://wiki.archlinux.org/index.php/Arch_Build_System
"Running abs as root creates the ABS tree by synchronizing with the Arch Linux server."
Does this mean that the ABS tree (not the package) is always downloaded from the official Arch Linux servers, never from any of the mirrors?

jomasti wrote:
ANOKNUSA wrote:makepkg is part of the abs package.
You might be confusing that with makeworld. makepkg is included with pacman.
Anyway, gregor, you are confusing the AUR with ABS. Although, what you are saying is still possible via the source files when looking up a package on https://www.archlinux.org/packages/. But with both, using a program or using the respective page is a personal choice.
Yup, you're right. My mistake.

Question about PHP

I am completely new to programming and have enjoyed Linux so much, that I would like to go into PHP next. Currently I am a University student with a dead end major (Russian Studies). I am looking to get a certificate in PHP over the course of this next year and to find a little better job with it than I could get with my current degree. I would do a Google search for this, however, I have come to like Arch and the community that surrounds it and wanted to know if any you fine web programmers out there, had any suggestions for free online courses in PHP or book that could be purchased. I was also wondering what a good PHP certification exam to take would be. I have seen the Zend exam and was considering doing a test prep for this after I learn a little more about PHP and SQL. Thank you for your help and suggestions!

Berticus wrote:
As I said, to most people, taxonomy doesn't matter. It does matter to other people, and I don't mean people like me who have these little pet peeves.
It matters to people who know a lot of languages who need to know when to use what language. There isn't a single programming or scripting language that can be everything, so it's important for people, mostly software engineers, to know taxonomy, so they can pick a language most optimal for what they need to get done. Most of the time, when you're dealing with very complex systems. Instead of using one language for the whole system, you'll find out you'll be using COBRA to handle hardware, C++ to handle interface and C to tie everything together or something like that.
I mean when you're differentiating between an interpretted language (script) and a program, the issue is efficiency and speed. No matter what you do, an interpretted language is inherently slower and less efficient than a programming language. Even Java that is compiled, is compiled to Java Native Language or something like that, and requires the Java Virtual Machine to interpret it (that's why Java gets it's own branch). I believe it's the fastest interpretted language, but how does it compare to a natively compiled program? It's still slower.
Even when you know you're going to use a programming language, you still have choices, because each programming language can be split into a high, middle, and low level language. Reasons for using different levels are due to how quickly do you need to write the program, how portable does the program need to be, how easy should other people be able to read the program, does it need to have low level abilities such as handling memory directly. Then there's also the question about how your program is going to flow. Is it functional or object oriented?
It's not so much an opionated matter when you think about it. It's more along the lines of do you need this knowledge or not? For most people, I'm willing to bet that's everybody who posts in this thread, that information is not important, they don't need to know it, because they handle very, very simple applications compared to the complex systems that do indeed require the programmer or scripter to know the difference.
Actually, the difference between interpreted and compiled (and faux-compiled) languages is different from the difference between programming and scripting languages, interpreted languages can also be programming languages, and compiled languages can be scripting (although this happens very little and is really pointless and tedious to do )
'Scripting' usually refers to code meant to extend upon a framework or program separate from the script itself, whereas 'programming' is creating applications that are on their own, separate applications, regardless of whether they're run though an interpreter at runtime. The difference is a bit vague, and you are right in that interpreted languages are often used for scripting, but it is not necessary, look at something like python, this can be used both as scripting for automating tasks quickly by using it's immense library, as well as for creating stand alone applications, which would be programming. (PHP is virtually always scripting, though)
Either way I prefer the term 'coding'

Question about SSLM configure

I have a question about our SSLM configure, please see the following example:
service aa-SSL
virtual ipaddr 172.25.17.15 protocol tcp port 443 secondary
server ipaddr 172.24.92.6 protocol tcp port 80
certificate rsa general-purpose trustpoint www.app.aa.com
no nat server
inservice
crypto pki trustpoint www.app.aa.com
revocation-check none
rsakeypair www.app.aa.com
crypto ca import www.app.aa.com pkcs12 tftp:xxx
======================================
Once we finish the configuration, we could find the corresponding cer in SSLM, like:
crypto pki certificate chain www.app.aa.com
My first question is how to remove this cert if we want to decommission aa-ssl environment? Is it only with âno crypto pki certificate chain www.app.aa.comâ
If we have another environment like www.pre.app.aa.com shared the same VIP with www.app.aa.com. My second question is could I create only one ssl entry with wildcard like the following configuration:
service aa-SSL
virtual ipaddr 172.25.17.15 protocol tcp port 443 secondary
server ipaddr 172.24.92.6 protocol tcp port 80
certificate rsa general-purpose trustpoint *.app.aa.com
no nat server
inservice
Please advice! I would appreciate it!

You can remove the certificate but you need to be in certificate chain configuration mode to delete certificates. An example configuration is provided here
http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_c5.html#wp1043434

[SOLVED] Question about CPU temperature

Hi everybody,
I just want to ask a question about "standard" CPU temperatures because my laptop (a Dell Vostro 3700) is permanently hot with the fans on even when I am not doing anything special.
I have CPU freq scaling active with the conservative governor, and I use Gnome Shell 3.2 with an nVidia using the nouveau driver.
Here are "stable" temperatures while writing this post:
# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +72.5°C (crit = +103.0°C)
nouveau-pci-0100
Adapter: PCI adapter
temp1: +78.0°C (high = +100.0°C, crit = +110.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +73.0°C (high = +95.0°C, crit = +105.0°C)
Core 2: +73.0°C (high = +95.0°C, crit = +105.0°C)
And this is the output of mpstat
# mpstat -P ALL
Linux 3.1.6-1-ARCH (fm) 01/04/2012 _x86_64_ (4 CPU)
10:16:50 PM CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle
10:16:50 PM all 1.59 0.18 0.54 0.02 0.00 0.02 0.00 0.00 97.65
10:16:50 PM 0 1.88 0.15 0.72 0.02 0.00 0.01 0.00 0.00 97.22
10:16:50 PM 1 1.64 0.21 0.40 0.02 0.00 0.01 0.00 0.00 97.73
10:16:50 PM 2 1.47 0.15 0.67 0.02 0.00 0.06 0.00 0.00 97.64
10:16:50 PM 3 1.36 0.20 0.39 0.02 0.00 0.01 0.00 0.00 98.01
The fan, of course, is full speed (very annoying)
I think that these temperatures are quite high, but I don't know what's really causing all this heating because my laptop is basically idle.
Any suggestion?
Thanks.
P.S.: Running Linux fm 3.1.6-1-ARCH #1 SMP PREEMPT Thu Dec 22 09:11:48 CET 2011 x86_64 Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz GenuineIntel GNU/Linux
Last edited by fm (2012-01-06 09:32:01)

samuvuo wrote:
fm wrote:Just to wrap up this topic, I "solved" the issue by adding these parameters to the kernel:
Just curious: what are the temperatures now? Sensors output after the "fix" would be nice.
It's in the previous posts:
Before (idle)
# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +72.5°C (crit = +103.0°C)
nouveau-pci-0100
Adapter: PCI adapter
temp1: +78.0°C (high = +100.0°C, crit = +110.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +73.0°C (high = +95.0°C, crit = +105.0°C)
Core 2: +73.0°C (high = +95.0°C, crit = +105.0°C)
After (idle)
acpitz-virtual-0
Adapter: Virtual device
temp1: +63.5°C (crit = +103.0°C)
nouveau-pci-0100
Adapter: PCI adapter
temp1: +68.0°C (high = +100.0°C, crit = +110.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +62.0°C (high = +95.0°C, crit = +105.0°C)
Core 2: +64.0°C (high = +95.0°C, crit = +105.0°C)
After (after playing 8 min youtube video)
acpitz-virtual-0
Adapter: Virtual device
temp1: +74.5°C (crit = +103.0°C)
nouveau-pci-0100
Adapter: PCI adapter
temp1: +78.0°C (high = +100.0°C, crit = +110.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +73.0°C (high = +95.0°C, crit = +105.0°C)
Core 2: +75.0°C (high = +95.0°C, crit = +105.0°C)
Fan spinning is better (less noisy) after specifying the kernel parameters.
Thanks
Last edited by fm (2012-01-06 13:43:05)

Question about Virtual Surro

Similar Messages

Maybe you are looking for