Question about W510 & SSD

Hey 
i've read some thread and sites about w510 and ssd's, but i'm a bit confused now.
So I will buy a "ThinkPad 2nd HDD Adapter Ultrabay III SATA" and put my current in use sata hd in it. Then the new SSD into the main slot right?
And what i have to respect by the selection of the ssd?
is SATA II supported? SATA III?
is SATA 3GB/s supported? SATA 6GB/s?
would be nice if anyone can give me some advice. 
thank you

That's exactly how I roll.  Intel 160GB SSD in the primary bay.  I use a couple of different 320 and 500GB 7200rpm drives in the Ultrabay.
W510 is SATA3.  It's still unknown if the full SATA6 pipe will be available on the W520.  But SSD drives that have a SATA6 capability should still downshift and work on the W510. The Intel and Crucial C300 drives do.

Similar Messages

  • Type of HDD in Edge E130 and question about msata SSD

    I'm interested in thickness of HDD in E130. I read that in E125 was 7 mm HDD and there is troubles with 9 mm. So, is  E130 similar to E125(E130 is next-gen of this type netbooks, but there is huge posibility that Lenovo Engineers decided not to change HDD type)? Or 9 mm hard drive will work?
    Installing msata breaks warranty agreement, doesn't it? And i have some, maybe, obvious questions amout msata SSD(i've read about installing SSD in other Thinkpad notebooks), but I need some proves for Edge E130:
    1)Speed is limited by SATAII interface?
    2)mSata drive as bootable device will work?
    Last questions are not such important, but i'll happy, if Edge E130/E135 users will share their experience
    Solved!
    Go to Solution.

    I bought the E130 as a travel computer, so I didn't have to travel with my X220T - which is a tank compared to this little fellow. I have the 3358-8dg model of the e130 (came with free-dos but I bought an extra 4GB Ram to up the total to 8GB). The HDD is the usual 7mm think ones as expected.
    I've had my e130 for 2 days now and I removed the HDD it shipped with and installed a 64GB mSata instead.
    Link to image
    I then installed Win7 with SP1 from a USB in UEFI mode (see this thread: http://forums.lenovo.com/t5/Windows-7-Discussion/Prepare-an-usb-thumb-drive-to-boot-windows-7-or-8-i... - installed Lenovo System Update 5 and installed all drivers and software along with all windows updates.
    So, running only an mSata HD and booting from it is not a problem at all.
    My windows experience index is 4.9 due to the Graphics: Desktop performance for Windows Aero.
    The HD transfer rate is 7.9.
    The exact model of the mSata SSD I installed is: Crucial m4 SSD 64GB, mSATA 6Gb/s (CT064M4SSD3)
    I hope this helps.
    Moderator note: images totalling more than 50k converted to links per forum rules:  Lenovo Community Participation Rules Also fixed broken link.

  • Questions about installing SSD on my 2010 Macbook Pro

    Hey there.
    I have a Macbook Pro 2010. 15 inches and 2.4 GHz.
    I was planning to upgrade only the memory from 4gb to 8, but realized that while I was at it, I might as well upgrade the hdd to an ssd as well.
    I've lurked around the internet on how to install and set up a solid state drive onto my mbp, and I got the installation part alright (open back, T6 screwdriver, etc etc).
    I'm concerned more about the set up - the process after in which I install my ssd, and installing the OSX - I have not yet found a site with solid step - by - step instructions into doing this.
    Cloning? TRIM? I am getting very confused, and mildly frustrated.
    So basically, after I physically install my SSD (which will be a Samsung 840 by the way), screw the bottom lid back on, then what?
    Just in case this helps: I have the official cd for the Snow Leopard, as well as the application dvd and ilife. A lot of people are saying something like install Lion via internet or a purchased usb. Can i simply just install my snow leopard by the cd, and then upgrade it to lion after?
    And I know that the 2010 mbp does not support SATA3. Im buying it simply for future upgrades.
    Thanks for reading my post.

    Let's see if I can help...
    You already are aware that you can't have SATA III speeds, but you're already ahead of me on that one - I always suggest anticipating for future needs.
    You've already made your choice of drive (and size, I'm guessing) and you know that you'll need a Phillips #00 and a Torx T6 screwdriver. I'm assuming that you've watched plenty of videos...
    ...so now, how to get everything working? What I would do is to buy an inexpensive USB enclosure for your old drive, install the new SSD and boot from the old drive, use Disk Utility from the old drive to format the SSD as "Mac OS Extended (Journaled)" with a single GUID partition, and then use Carbon Copy Cloner (free for 30 days) to clone your old drive to your new drive (this is assuming that your SSD has similar space as your old HD?).
    It's a simple procedure - pretty simply outlined here -> https://discussions.apple.com/docs/DOC-4122.
    The only uh-oh is if you have far more data on your HD than space available on your new SSD. That presents a new challenge. Write back if my method won't work because of space issues.
    Oh, and I use Trim Enabler to enable TRIM on my SSD - the only drawback is that every time there's a .1 update to OS X, you must run it again and restart.
    Clinton

  • Questions about installing ssd

    I Want to install a ssd to my MB pro 13 inch late 2011 model. What is your opinion and where do I make the installation? Remove the SuperDrive, install in its place the original hdd and put the ssd in place of the original ssd?

    Personally, I would replace the original hard drive with the SSD instead of sacrificing the optical drive.  Check out the SSD offerings of OWC, http://www.macsales.com as they are Mac specialists and guarantee their stuff to work.  They also have on-line videos of how to replace items so you can see the step-by-step process.  You might also look at the small enclosure they have (around $16) that you can put the internal drive in and use as a USB drive.

  • Hi Everyone Im New, Got Question About Upgrading MSI GT60 0ND With SSD

    Hi Everyone I'm New, Got Question About Upgrading MSI GT60 0ND With SSD.
     :welcome:So As I've stated I'm new here, or at least got a new MSI notebook.
    Ive got the new MSI gt60 0ND with 750GB HD and 675 Ge-Force GTX , anyways to the bottom line.
    I would like to Upgrade my computer with SSD that I bought and install the win8 on it, in order to speed things up, but I have encountered a few problems..
    1. there is no sticker on the back of the computer that gives information about the serial number of my windows 8...
    2. lets say in some magical way I could get the serial number out, can I use it to reinstall ? because Ive heard that you cannot use this CD key anyways unless you got a special win8 installation CD key from MSI because its MSI branded windows 8.
    am I screwed    ? ?? ? I thought it is possible to upgrade with SSD but it seems like MSI made it very hard, I do not understand why they even putted the warranty void sticker on the expansion bay's .... WEIRD..
    Please help !! Thanks in advance,
    David

    Quote from: dudiz10 on 10-January-13, 19:20:54
    Hi Everyone I'm New, Got Question About Upgrading MSI GT60 0ND With SSD.
     :welcome:So As I've stated I'm new here, or at least got a new MSI notebook.
    Ive got the new MSI gt60 0ND with 750GB HD and 675 Ge-Force GTX , anyways to the bottom line.
    I would like to Upgrade my computer with SSD that I bought and install the win8 on it, in order to speed things up, but I have encountered a few problems..
    1. there is no sticker on the back of the computer that gives information about the serial number of my windows 8...
    2. lets say in some magical way I could get the serial number out, can I use it to reinstall ? because Ive heard that you cannot use this CD key anyways unless you got a special win8 installation CD key from MSI because its MSI branded windows 8.
    am I screwed    ? ?? ? I thought it is possible to upgrade with SSD but it seems like MSI made it very hard, I do not understand why they even putted the warranty void sticker on the expansion bay's .... WEIRD..
    Please help !! Thanks in advance,
    David
    I think serial key of windows is in your bios which you cannot See however it should be automatically activates windows

  • Questions about mac mini iTunes server, streaming to macbook pro, ipads, etc.

    I'm thinking about getting a mac mini to work with my NAS as a iTunes server. I have a bunch of questions about this. I will have two iPhones, a few iPads, and a laptop that will be accessing the files. I have iTunes match. This is basically to keep an always on computer for hosting the music/movies. My questions are as follows . . .
    #1 Are there any good, comprehensive guides to show you how to do this?
    #2 Can the movies be accessed when not at home on the shared network?
    #3 Can the iPads or the macbook pro download the shared movies to be stored locally?
    #4 Back to #3, how will it work on my macbook pro with listening to music (I have iTunes match)? Say i go to library and I break out my macbook pro and I don't have internet. What happens if I download music while at home onto my macbook pro to listen to it when I go to the library? Will i start a new library on my macbook pro? How will that mesh with the home server when I come back.
    #5 Is there a way to mirror files or folders? So something that I have on my macbook pro will also mirror on the home server.
    Thanks for your help on this. I'll post any follow up questions.

    seanfenton wrote:
    1. I want to replace the Optical drive with a 2TB SATA. can I use this 2.5 inch?
    I do not know if it is the same model number, but this one will work in your MBP:
    http://eshop.macsales.com/item/SEAGATE%20OWC/ST2000LM003M/
    2. I want to replace the HD with a 128GB SSD 840. When I replace these drives, will my OS still be in tact? I have never done this job before.
    No. You will have to format the drives in Disk Utility>Erase to Mac OS Extended (Journaled) and then install the OSX by using the original install disks.
    3.) I want to replace the ram sticks to max capacity. This is 2 2GB sticks, Correct?
    No.  An early 17" 2008 MBP will accept 6GB RAM with the following specifications:  200-pin PC2-5300 (667MHz) DDR2 SO-DIMM.  The best sources of Mac compatible RAM are OWC and Crucial.
    4.) Most difficult...
    I want to extend the monitor wirelessly to a projector. I thought about using Apple TV and Airplay. However, support for airplay is for MacBooks 2011 and newer. I thought of using a PS3 and the media server, but I think this brings on a format compatibility issue. (my library is so large I could not afford to convert all my movies to MP4.) So, how would you recommend I put my extended monitor with VLC player onto a projector?
    Could I possibly connect the MBP to a Mac Mini as an extension? would this work natively? I would rather use a VGA cord than F with 3rd party app BS.
    Cannot help you there.
    5..) I want to Bypass iTunes this time around. I would prefer to use Finder and VLC to manage all of my music. I mostly play all my music on shuffle, so, could I create a playlist on VLC with all of my music and play it randomly? (im sure this is possible but i'd like to organize all my plans with confirmation.)
    You are not obligated to use iTunes.
    6.) Can i upgrade the keyboard to backlit? i've read that this is possible.
    All MBPs have back lighted keyboards.  Your either needs a NVRAM reset or a repair.
    Ciao.

  • Few questions about difference between Satellite P70 , L70, S70

    Hello, i have many questions about the series P70 , L70, S70 that come with a 1920x1080 panel.
    1) What are the differences between the L70 and S70 series? Except of the HDD capacity and RAM, the notebooks look pretty identical.
    2) Do P70 , L70, S70 support a 2nd HDD or is it just the P70 series that support it ?
    3) Do all three (P70, L70, S70 series) come with the same TFT Panels ?
    4) Which of the above series supports mSata ?
    5) Do all of the model of each series come with a mSata support? E.g. Could it be that L70-a-13m supports mSata while the L70-a-146 does not ?
    6) All of the above, come with a S-ATA II or S-ATA III interface ?
    7) Which is the best of those series listed ? I am trying to understand what makes the big difference from S70 to P70 except of the casing for example.
    Thank you in advance.

    >1) What are the differences between the L70 and S70 series? Except of the HDD capacity and RAM, the notebooks look pretty identical.
    What Sat L70 and S70 models do you mean exactly? There are different L70-xxx and S70-xxx models on the market which supports different hardware specifications.
    >2) Do P70 , L70, S70 support a 2nd HDD or is it just the P70 series that support it?
    As you can see in this [Sat P70 HDD replacement document,|http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports 2nd HDD bay BUT even if there is an 2nd HDD bay this does not mean that you could use 2nd HDD. In case the 2nd HDD bay would be equipped with HDD connector, you could use the 2nd HDD
    I found also the [Sat L70/S70 HDD replacement |http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] document on Toshiba page and there I can see that 2nd HDD bay is not available
    > 3) Do all three (P70, L70, S70 series) come with the same TFT Panels?
    See point 1). Different P70, L70, S70 models were equipped with different hardware parts.
    > 4) Which of the above series supports mSata?
    As far as I know only some P70 models are equipped with an 256GB mSATA-SSD.
    > 5) Do all of the model of each series come with a mSata support? E.g. Could it be that L70-a-13m supports mSata while the L70-a-146 does not ?
    See point 4) not all models supports the same hardware specifications
    > 6) All of the above, come with a S-ATA II or S-ATA III interface ?
    I dont think that SATA III is supported. I guess it would be SATA II
    > 7) Which is the best of those series listed ? I am trying to understand what makes the big difference from S70 to P70 except of the casing for example.
    Not easy to answer because there are too many models released in Europea.
    And not all models are available in each country. So I guess you will need to look for models which were released in your country.

  • A few questions about my MacBook Pro?

    Hey guys, I have a few questions about Virtual Machines and a few other random questions.
    1. Which one is the most "complete" in its features when compared to a plain install of Win. 7?
    2. Which VM should I purchase?
    I have a 15" late 2012 MacBook Pro with a 2.6 ghz intel i7, 16gb ram and a 256gb SSD. (I was planning on running it off of an external hard drive— if that is possible)
    3. I have 206.12 GB of 255.2 GB free— should I just use boot camp instead?
    4. If I use Boot Camp, do I have to delete the data that's on my Mac currently to install Win. 7 or can I partition my current drive and keep my data?
    5. What is the "other" data that's taking up 25.51 GB of space on my SSD? (I have the same problem on my iPhone, but that's a different problem.)
    Thank you very much.

    You posted your Boot Camp questions in the MacBook Pro forum. Try asking in the Boot Camp forum where the Boot Camp gurus hang out. https://discussions.apple.com/community/windows_software/boot_camp

  • Satellite U405D - Several questions about overheat/disassembly/upgrade etc.

    Hi there,
    I have several questions about my one year old Satellite U405D-S2910
    1- When it works, after 2-3 hours (I usually run small programs like safari, msn messenger and bsplayer) CPU gets 85-90 C (178-188 F). When I play Age of Empires 2 (Come on, its an ancient game) like 2-3 hours it shuts down itself. What could be the possible reason?? By the way, let me inform you about the climate of the town I live, temp 30C - humidity 25-35% (nowadays).
    ps. Cpu= AMD Turion 64 X2 Dual-Core Mobile Processor. Model, RM-74
    2- I'm going to disassemble my laptop in order to clean its cooling units (I think reason of overheating is this). It doesnt seem like a desktop, so complicated. Ive seen a step-by-step disassembly(btw, its so hard to spell disassembly:) I think Im going to do this. What are your suggestions about it? any experiences could help me?
    3- My laptops Ram memory consists of 2X2GB PC5300 DDR2 667 MHz SDRAM, I want to replace it to 2x2GB MACH XTREME DDR2 1333MHZ CL9 NOTEBOOK RAM. Should I do it? Does it fit my laptop, work stable? any suggestions?
    ps. mainboard chipset AMD M780V
    4- finally :) , Should I use 64 bit OS or 32 bit OS (win7)? what OS would you use if you were me?
    Thank you.

    Hi buddy,
    1+2. I think everything is related to a higher internal temperature and you should clean your notebook using compressed air spray. Therefore its not necessary to disassemble it, just blow gently and shortly the air through the notebook. You can buy such compressed air spray from every computer store I think and it takes only 5 minutes.
    You can find an useful article about this here:
    3. In my opinion you should forget this update! The RAM speed is related to FSB of CPU and as far as I know on Satellite U405D its 667MHz so its already the fastest RAM that you can have. Save your money and buy a bigger HDD or in best case an SSD that can really improve the performance!
    4. In my opinion the answer is clear: Windows 7 64bit.
    Only a 64bit OS support full 4GB RAM. ;)

  • Yet another question about super raid - GS70

    Yes, another question about Super Raid...I recently picked up the cheapest model of the GS70 on newegg which comes with 1 mSata SSD...just a mediocre one if I remember reading correctly.  I'm interested in using MSI's Super Raid once my warranty is over with and have been reading a couple posts here:
    1. Walk through of how to reinstall OS
    --> https://forum-en.msi.com/index.php?topic=167198.msg1224063#msg1224063
    2. I'll need a Super Raid card with links to get some, for about $100 each
    --> https://forum-en.msi.com/index.php?topic=171722.msg1252847#msg1252847
    3. I can't get Super Raid unless it originally came with it?
    --> https://forum-en.msi.com/index.php?topic=171185.msg1249640#msg1249640
    So what's the bottom line? Would I still be able to enable super raid in the future or am I SOL since it didn't come with it originally?
    thanks!

    The GT70 CAN come with an adapter that has 2 (on the older, GT70 0NX models) or 3 (on newer GT70 20X models) sockets for mSATA drives. It's an optional part, that takes place of the primary SATA drive in the notebook, and physically has a different part that connects to the motherboard. If it doesn't come with the SuperRaid adapter, then it just has support for a single 2.5" SATA drive.
    The GS70 on the otherhand, has this built into the motherboard and there is no swapping it out for a normal 2.5" SATA drive. You can only use mSATA drives (on those ports). The GS70 is meant to be an ultrabook, and therefore does not have the same ability as the GT70 to house up to 2 full size 2.5" SATA drives.
    That's really the main difference here. Without physically seeing a GT70 to see how the SuperRaid adapter works, it's slightly difficult to explain.
    But in the end, I wouldn't worry about the SuperRaid....The GS70 should have support for Intel Raid Management Engine, in which case that's all you really need.

  • Questions about your new HP Products? HP Expert Day: January 14th, 2015

    Thank you for coming to Expert Day! The event has now concluded.
    To find out about future events, please visit this page.
    On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us.  We hope you will return to the boards to share your experiences, both good and bad.
     We will be holding more of these Expert Days on different topics in the months to come.  We hope to see you then!
     If you still have questions to ask, feel free to post them on the Forum – we always have experts online to help you out.
    So, what is HP Expert Day?
    Expert Day is an online event when HP employees join our Support Forums to answer questions about your HP products. And it’s FREE.
    Ok, how do I get started?
    It’s easy. Come out to the HP Support Forums, post your question, and wait for a response! We’ll have experts online covering our Notebook boards, Desktop boards, Tablet boards, and Printer and all-in-one boards.
    We’ll also be covering the commercial products on the HP Enterprise Business Community. We’ll have experts online covering select boards on the Printing and Digital Imaging and Desktops and Workstations categories.
    What if I need more information?
    For more information and a complete schedule of previous events, check out this post on the forums.
    Is Expert Day an English-only event?
    No. This time we’ll have experts and volunteers online across the globe, answering questions on the English, Simplified Chinese, and Korean forums. Here’s the information:
    Enterprise Business Forum: January 14th 7:00am to 12:00pm and 6:00pm to 11:00pm Pacific Time
    Korean Forum: January 15th 10am to 6pm Korea Time
    Simplified Chinese Forum: January 15th 10am to 6pm China Time
    Looking forward to seeing you on January 14th!
    I am an HP employee.

    My HP, purchased in June 2012, died on Saturday.  I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank.  When I turned it on, I got a Windows Error Recovery message.  The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything. 
    I'm not happy with HP.  Any suggestions?

  • Have questions about your Creative Cloud or Subscription Membership?

    You can find answers to several questions regarding membership to our subscription services.  Please see Membership troubleshooting | Creative Cloud - http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html for additional information.  You can find information on such topics as:
    I need help completeing my new purchase or upgrade.
    I want to change the credit card on my account.
    I have a question about my membership price or statement charges.
    I want to change my membership: upgrade, renew, or restart.
    I want to cancel my membership.
    How do I access my account information or change update notifications?

    Branching to new discussion.
    Christym16625842 you are welcome to utilize the process listed in Creative Cloud Help | Install, update, or uninstall apps to install and evaluate the applications included with a Creative Cloud Membership.  The software is fully supported on recent Mac computers.  You can find the system requirements for the Creative Cloud at System requirements | Creative Cloud.

  • Questions about using the Voice Memos app

    I'm currently an Android user, but will be getting an iPhone 6 soon. My most used app is the voice memos app on my Android phone. I have a couple questions about the iPhone's built-in voice memos app.
    -Am I able to transfer my voice memos from my Android phone to my iPhone, so my recordings from my Android app will show up in the iPhone's voice memos app?
    -When exporting voice memos from the iPhone to computer, are recordings in MP3 format? If not, what format are they in?
    -In your opinion, how is the recording quality of the voice memos app?

    You cannot import your Android voice memos to your iPhone's voice memo app.  You might be able to play the Android memos and have the iPhone pick up the audio and record it.
    Here is the writeup about sending voice memos from the iPhone to your computer (from the iPhone User Guide):
    App quality is excellent.

  • Re: Question about the Satellite P300-18Z

    Hello everyone,
    I have a couple of questions about the Satellite P300-18Z.
    What "video out" does this laptop have? (DVI, s-video or d-sub)
    Can I link the laptop up to a LCD-TV and watch movies on a resolution of 1080p? (full-HD)
    What is the warranty on this laptop?

    Hello
    According the notebook specification Satellite P300-18Z has follow interfaces:
    DVI - No DVI port available
    HDMI - HDMI-out (HDMI out port available)
    Headphone Jack - External Headphone Jack (Stereo) available
    .link - iLink (Firewire) port available
    Line in Jack - No Line in Jack port available
    Line out Jack - No Line Out Jack available
    Microphone Jack - External Micrphone Jack
    TV-out - port available (S-Video port)
    VGA - VGA (External monitor port RGB port)
    Also you can connect it to your LCD TV using HDMI cable.
    Warranty is country specific and clarifies this with your local dealer but I know that all Toshiba products have 1 year standard warranty and also 1 year international warranty. you can of course expand it.

  • Some questions about Muse

    First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
    The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
    It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html).  I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
    Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
    A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
    The hits from Facebook have sometimes very long links, eg.
    (http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident,  moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
    The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but  the text after export and moving cursor into it does not change color for some reason.
    I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
    The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
    The comments Disqus do not load, especially at horizontal layouts  (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
    YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
    Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
    On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
    This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
    Is it possible to make an option of  scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
    Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
    I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
    In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
    According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
    The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
    Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
    I’m using Adobe Muse 7.2 on OS X 10.9.1.
    and I'm sending Muse file to <[email protected]>

    Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
    Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
    Here is the link to the old forums- http://support.muse.adobe.com/muse

Maybe you are looking for