Question about WAD 3.5 and Firefox 3.0

Hello everyone,
I have a question concerning WAD 3.5.
Our company is migrating from Internet Explorer 6.0 to Mozilla Firefox 3.0.
All right, when we execute a WAD template web in IE6 and hover the mouse over a graphic's legend, we are able to see an ALT text - that yellow-rectangle wrapped text.
In Firefox 3, however, we are not able to see the ALT text when we hover the mouse over a graphic's legend. Does anyone knows if there is anyway to make it work in Firefox, or is it a browser / WAD version limitation?
I know WAD 7.0 work just fine with graphic's ALT attribute, but at this moment we have to try to make it work in WAD 3.5.
Thanks in advance for you attention.
Carlos Eduardo Lacombe
Edited by: Carlos Eduardo Lacombe on Dec 9, 2008 1:26 PM

Ok Mike, thank you very much! I was already guessing it would really not work in Firefox, and we would have to look for alternative solutions.
We followed your advice and we are now trying to use a Firefox plugin named IE Tab, and it looks like its going to solve our problem.
Thanks a lot for your attention.
Sincerely,
Carlos Eduardo Lacombe

Similar Messages

HT201263 What will i do?screenshot There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, cli

What will i do? ITune screenshot is as follows >
There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

Do what it said to do.
"Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. "

TS1814 There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

There is a problem with your iPhone.
Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
To find your nearest Apple Store, click here.
Please help me i can aktivate my phone imei 012423006333181.

There is a problem with your iPhone.
Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.
To find your nearest Apple Store
no imei also

Can I turn off auto tab loading, if no, question about uninstalling newest version of firefox

I tend to wind up with far too many tabs open at one time to not bog firefox down. I came up with a very useful workaround - close and re-open firefox with it disconnected from the internet.
Thru version 3.6.19 this works beautifully, because when it can't find the internet, it loads all of the tabs as "problem loading page." They load quickly but don't use much memory and don't bog Firefox down that way. Then I connect to internet, and work the the tabs at my leisure. That way I have many tabs of pages I'm interested in ready for me, but only a few actually open and using memory etc.
When I upgraded to the newest Firefox version, I had a lot of tabs already open but I discovered my workaround trick no longer works. As soon as I reconnect the internet, all the 'problem loading' tabs automatically start loading the full/real pages.
QUESTION 1: Is there a way I can turn this function off, at least for awhile until I can work thru the set of tabs I already had loaded when I upgraded?
QUESTION 2: Is there a way I can easily/quickly break a single window with a bunch of tabs into multiple windows? I mean WITHOUT having to handle each tab one by one...
QUESTION 3: Is there some way to get a window listing all tabs and windows where I can delete selected tabs, while I have that window open? The dropdown on the righthand side of the page doesn't work for this, because it shows them all as 'problem loading page' rather than showing the url (or maybe there is a way to change the display in the dropdown menu?)
Since I discovered this problem, I re-installed Firefox 3.6.19 (leaving the new Firefox version on the computer too). I did NOT make a new profile because I wanted it to see the session manager set of tabs I had already, my preferences & passwords, etc.... I am running 3.6.19, but I suspect it is having some problems because of both versions being on the computer with the single profile however, as its crashing more often and using more memory & CPU... I also tried to save the window in session manager (which I had before I loaded the new firefox), but got an error message.
QUESTION 4: Is this likely the problem, e.g., two firefox versions but no new profile? IF so, is there a way to duplicate the profile so each firefox version has it's own, but both are identical?
QUESTION 5: If uninstall the new Firefox, will the 3.6.19 version still run properly, with my profile, settings, session manager saved sessions, etc. all still intact?
Thanks in advance for your help, I really need it!!

Maybe:
*Multiple Tab Handler: https://addons.mozilla.org/firefox/addon/multiple-tab-handler/

Some questions about Unity 4.0 and IPC

I have a couple of questions and I was looking for "real world" answers, not specific answers from the design guide.
1.What is this bandwidth requirement between Exchange and Unity and what is it used for?
2. What sort of issues would we experience if we placed the Unity UM Server at the Colo and placed the Exchange server at the customer premise; with a single T1 between the sites?
3.What else is involved with a Unity UM install vs. a Unity VM install?
4.Does the Unity UM and Exchange servers have to be running AD?
5. Can Unity or the Exchange box be the Domain Controller? Or does it need to be a separate server?
6. Where does a vm message get streamed from? The Unity server or the Exchange server?

No you do not pay for FaceTime. It uses your WiFi network, so if you have access to WiFi it is free.
There is no server required for FaceTime, it will use a direct device to device protocol.
I can't answer the question about using phones in different countries as that will depend on if you buy a phone that is locked to a carrier.
If you buy a phone in Germany and it is locked to a German phone network then it will most likely not work with a SIM from Turkey. You would need to buy an unlocked phone which are very expensive as they do not have any carrier subsidy applied to the price.

Question about using 10g/11g and APEX ...

Hi,
I just recently learned of Oracle's APEX and have a few questions about using it.
Can I use APEX with express, standard, and enterprise editions of 10g and 11g?
Are all of these free to use?

You might want to read about APEX rather than jumping into questions that are reasonably well documented. Info at http://www.oracle.com/technology/products/database/application_express/index.html
Your specific questions:
1) Apex is a package that can be installed into any properly licensed database.
2) The price for the production license of the database varies by edition.
The price for Express Edition is $0 for use in production. Part of the cost for that edition is 'no Oracle Support based support, no patches, data volume limitation, etc.'

Questions about JVC GZ HD7 and Final Cut

i'm planning to buy a JVC GZ HD7, but i have some questions about it...
My imac configuration is
Imac 20" late 2006
1 Gb Ram
Leopard 10.5.2
Final Cut Studio 2
Ok
So my questions are:
1- When shooting the best setting for me is the 1440cbr, or 1920x1080
is better? i would like to have progressive instead of interlaced
moviefiles, but for what i have read the JVC HD7 only shoots interlaced...is possible to turn them into progressive after working in final cut?
2- In Final Cut Pro what are the sequence settings and the video
settings for a video shoot from this camera?
I would like to know the best settings possible for me,
regarding that i would like to edit in real time, no rendering needed,
and to have the best image quality that this camera can offer...

FCE is designed to work with DV/HDV files. It cannot work natively with MPEG2 files. You will need something like MPEG Streamclip to convert your files to a format that FCE understands
Streamclip is free but you need to buy Apple's MPEG Playback Component to make it work

Techie Question about iWeb, outbound links, and Google Analytics

Hi,
I have a kind of pretty technical question about using Google Analytics (GA) with iWeb sites to measure clicks on outbound links. Here's the setup:
1) My website's online, and GA is working properly.
2) I don't sell stuff directly, but I do have a "Purchase" page which contains a link to a specific Amazon page.
3) I'm pretty sure I can measure how many people go to the Purchase page using GA, but how do I measure whether visitors click on the Amazon link? It would be interesting to me to be able to gauge what the conversion rate is; that is, how many people actually proceed to purchase the product at Amazon.
I've checked the GA instructions and there's a page about manually tracking clicks on outbound links but it requires some code inputting. I know zero about coding, but I'm pretty sure that in iWeb you can't get access to the source code to input the required code.
Am I wrong about this? And if I am, then does anyone here know how to measure the clickthrough rate?
Anyway, hope you can help. Thanks in advance.

I don't know about the link tracking but you could have the link take you to a redirect page which automatically sends them to Amazon.com after a preset time, 0 seconds to whatever you'd like. You can put a counter on that redirect page, like StatCounter. StatCounter can tell you how many, from where they came, i.e country and area, repeat visits, etc.
Tutorials #12 & #13 describe how to put a visible counter on a page but with a redirect page you wouldn't have to bother since it wouldn't be seen. You can get all of your information from your account on the StatCounter site.
The redirect page would be a simple plain text page titled redirect.html and would look like this:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="refresh"
content="0; Destination URL">
<title>Redirecting or whatever you'd like to appear at the top of the browser</title>
</head>
<body>
</body>
</html>
0 Is the number of seconds to wait before redirecting the visitor. If set to zero the visitor would not know they were being redirected. Replace Destination URL with the Amazon URL you want them to go to.
OT

I just have questions about the AirPort Express and how it works.

My household Wi-Fi is not the strongest in my room and I found out about the AirPort Express and I read the overvie, but I still have some questions on how it works, how its setup and other questions as well.

The AirPort Express will not wirelessly extend the signal from another router unless that router is also an Apple product.
Not sure what other questions you might have, but we'll try to answer if you want to ask.

Question about suitability of iPhone and specific comparisons

I like the Verizon network (for which I'm considering upgrading to the Omnia II) but am thinking about biting the bullet and going to AT&T for the iPhone. I use Macs at home and at work. My main uses will be phonecalls (with reliable voice dialing from my car - bluetooth stereo and earpiece), mail (Exchange server access for calendar, mail, and addressbook), internet through the cellphone network (not wifi) - browsing, SFTP, VNC, etc., watching videos, photos, and listening to music, calendar reminders (as well as periodic sound reminders for missed calls, voicemails, etc.), opening PDF and Word documents, GPS (ideally with spoken driving directions),and Skype. Given these uses, can anyone advise me if there's anything here that is a problem for the iPhone?
thanks,
Mike

"VNC"
There are pretty nice VNC clients for the platform, the best being Jaadu VNC. (See my just-published "Everything you will ever want to know about the remote desktop controllers on the iPhone" for more info if interested; it's been cross-posted to several iPhone forums. Not this one - yet - as I still don't have Level 1.)
watching videos
The 3G S (but not the 3G!) is far better than current for example Windows Mobile or Symbian phones in that it can play back MPEG-4 / H.264 videos without excessive power consumption. That is, if all your videos are in this format, the 3G S is the way to go.
Nevertheless, if your videos are in DivX, XviD or - even worse - WMV, you won't be able to natively play them back - you'll need to transcode them first.
This, unfortunately, also means WMV streaming TV stations are far harder to watch than on, say, Windows Mobile. The only AppStore app ("Streamer") supporting them is really bad and delivers dismal performance, even on the 3G S.

Question about full cycle charges and battery life

So I've had the new iPad since day 1 and absolutely love it, though recently I've noticed that my battery life doesn't seem to hold up as well as it has in the past. I've done three full cycle charges since getting it however during my latest one I accidently brought along my iPod wall charger and not the one that comes with the iPad. My iPad was fully discharged and I plugged it in assuming that in the 7 hour window I had that it would be fully charged within 5 hours, but this was not the case due to me having the wrong charger. After about 7 hrs of charging it was only at around 60-70% so I had to unplug it, bring it home, then plug it in once more using the correct charger. Probably a fairly obvious question but does this not count as a full cycle charge because I unplugged it? Should I perform another full cycle charge even though this most recent one was not even a week ago. I know you're supposed to completely discharge your battery as few times as possible so it worries me having to do it again so soon.
About battery life, I've noticed lately that my iPad battery seems to be depleting quicker than normal, and was hoping that perhaps this was caused by being overdue for a full-cycle charge which I may have flubbed as seen above. I'm aware of a majority of the little tips and tricks to prolong battery life however I'm not so knowledgeable on the "do's and don'ts" of charging the actual iPad so any information on that would be helpful. I should also note that unfortunately I accidently left by iPad in a hot car for a little over an hour and was tremendously devastated knowing what this can do to the battery, so could this be the main cause for a seemingly weaker battery?
Thanks for any feedback!

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Question about Photoshop scratch disk and specific setup

Hi Folks
Thanks for the help in advance.
I'm a novice and need help finding a solution to a new PC Build. (Windows 7 Pro 64bit with Photoshop CS6)
I only recently found out about having a scratch disk dedicated for photoshop (very novice i know ), and was wondering if a 120-128GB SSD would be enough? (Please bear in mind I can't fit large SSD raid configs to my budget, plus I live in New Zealand, so prices are higher for SSD at the moment).
I only edit single camera RAW files at a time around 25mb per file, with no large amount of layers and very rarely do large images i.e. Panorama etc. I have searched the forums but could not find a concrete answer.
My setup was originally meant for a HTPC (I don't intend to overclock), but I will also be using it for light photography projects. Specs below:
CPU: Intel i7 3770
Mobo: Asrock B75 Pro3-M (or Asus P8H77m Pro, depending on budget)
16gb Ram (maybe bump up to 32gb later)
120-128gb SSD for OS and apps
120-128gb SSD scratch disk
2 TB HDD for storage
If anyone knows, the motherboards I've listed have 3x Sata3 ports, Asrock has one Intel chip and two Asmedia controlled Sata3 ports, while Asus has 2x Intel controlled and 1x Marvell controlled Sata3 port. If I went with the Asrock, would it be okay to connect the OS/Apps SSD to the intel controlled sata3 port and have the scratch disk and storage HDD to the Asmedia sata3 ports?
And one more novice question, when I begin to edit my images, is it best to transfer my photos from memory card to storage HDD then work from there? Or would it be quicker opening images direct from a USB 3.0 card reader / USB 3.0 external hard drive?
Thanks again everyone, really appreciate it

priddye wrote:
Just to clarify, if/when I get one 256gb SSD for my main C: drive, I can load the OS/Apps and store some data for the time being (until I get another SSD) and use the 2TB HDD for scratch disk only?
Yes, that's what I meant. You could try putting Photoshop scratch on C: at least temporarily, and watch your free space carefully. If you don't work on big documents or set your history states to be very large, it might be workable. But be careful. The safe "set it and forget it" configuration is to make your HDD the one and only Photoshop scratch drive.
When I do get around to getting the second 256gb, I will look at installing the two SSD's in RAID configuration. If i were to do this, can I load the OS/Apps to the RAID SSD's as well as using them for scratch disks and have the 2TB HDD for storage? I hope that makes sense.
Sounds about right; with 512GB on tap you should be able to run just about everything from C:, as long as you don't keep your entire photo library on there. Realistically, on a big system that's got a lot of apps installed and has been used for some time, Windows and your apps may end up consuming 100 to 150 GB, so that would still leave you a lot of breathing room.
Keep in mind that what you describe may require 3rd party re-partitioning software and/or backup and restoral, or a complete reinstallation of Windows and everything (usually the latter is what is recommended when moving up to a RAID system volume).
By the way, SSDs stay in best working order if you overprovision - i.e., maintain a fair amount of free space. The internal controllers need the free space to keep the data organized well and maintain top performance.
-Noel

Questions about Assumption of Liability and device to be used for unlimited data plan

This is my first post on here. I have an opportunity that someone I know is willing to transfer his smartphone plan with unlimited data to me. I have read extensively on here and other sites and gathered some information, and also heard of many complications and questionable losses of unlimited data plans when making various types of changes to devices or services. Some of what I read may be outdated as well if Verizon has made changes in their policies, so I will start with the most obvious question: as of this date, is an AOL possible while keeping the unlimited data plan intact?
If so, here are some other questions I have:
-Will I receive a new SIM card by mail or do I need to use my friend's old SIM card?
-If my ultimate end goal is to use laptop, do I have to connect through a smartphone (and is there any additional charge for that, or would it change the plan), or can I put the SIM card in a mobile hotspot such as the MHS291L and use only the data portion of the plan?
-After getting the plan, is there any way I can get TWO SIM cards - one for a mobile hotspot, and the other strictly for voice and text? If so, how much extra would that cost?
-If we went to a Verizon store to do this transfer or AOL, how can we be absolutely certain it goes smoothly, that no one makes any unauthorized plan changes and does not lose the unlimited data? I have unfortunately read some horror stories of it being lost in similar situations, no one seems to be accountable, and it winds up costing someone countless hours of struggle with Verizon to try to get it back (whether they are successful or not I don't know).
-If at some point the SIM card was lost (such as if I lost the device), can it be replaced without affecting the plan?
For what it's worth (especially for those working for Verizon), I am not looking for a way to hog up absurd amounts of data but simply to be able to do the basic stuff I need to online and maybe watch a movie once in a while without having really huge bills. Even if I used the internet without giving data consumption a second thought, I doubt I'd go much over 25-30GB most months.
Thanks to whoever can provide me with information.

Hi NicandroN_VZW, sorry i did not see your reply in time but thank you just the same. I called the number for the AOL department and they were able to help me with it pretty easily and answer most of my questions
I do have a couple other questions regarding the unlimited data plan on smartphones. I have seen various comments regarding these things online, and i can make a good guess about what "might work," but i'm really looking to know Verizon's official policy on these things, if one exists. In case any non-verizon employees are able to provide this information as well, if you have references to where i can find it in writing that would be helpful.
First, i realize there is an optional $30 fee for mobile hotspot use. But does Verizon have any policy about whether this fee must be paid if i connect only via a USB cable (since it would not actually be a "hotspot," and could not connect multiple devices)?
And my other question is, if i do opt to pay the $30 hotspot fee, is there any policy either for or against using that SIM card in a 4g hotspot such as the MHS291L?
PS i am asking these things here rather than by PM because, given the wide range of opinions which can be found online and that others have looked into similar things, i am sure other people could also benefit from knowing Verizon's policy regarding these things.

Question about WAD print version configuration

Hi gurus,
We are having a problem with the WAD print version. We have created two WAD templates, one of them is for be viewed at the portal and the other one for the export to PDF.
Our template has several tables(data providers) in a horizontal line. The template for the export is exactly like this original template, but despite this, when we press the "print version" button in the portal, the PDF appears desconfigure and shows the data providers one under the other, in a vertical line.
We have tried to change the size of the data providers but we are not getting the expected result.
Could anyone give me some idea of how to proceed correctly for this situation?
Thank you in advanced.
Manuel.

Ok Mike, thank you very much! I was already guessing it would really not work in Firefox, and we would have to look for alternative solutions.
We followed your advice and we are now trying to use a Firefox plugin named IE Tab, and it looks like its going to solve our problem.
Thanks a lot for your attention.
Sincerely,
Carlos Eduardo Lacombe

Questions about my MacBook Pro and Apple Support.

I was an early adopter of the Intel Mac Platform. Got my first Mac (my MacBook Pro) in April 06. It was not part of the battery recall, but I have had numerous problems. I cannot keep the machine running more than 3-5 hours without it shutting down or just locking up. The case has popped slightly (about 1mm) open on the front left. I cannot use the function keys for the heat. And I know that I need to use Apple Support, but let me tell you: I have not been impressed with Apple Support.
My Mac was sent back for "repair" in October, and returned to me less than 6 days later. When I received it, it had a preloaded user account (complete with password!) for a user (not me) that I didn't recognize. And still had the same heat/random shutdown symptoms. Upon calling Apple Support, I was told that there wasn't anything that could be done. In fact, on one phone call I was just flat-out told that I should "just go buy another one". I could go on at length about my experiences with Apple Support.
So here is my question:
Is there a magic phone number, person I can contact to actually get something done about this? I have had less than 3 total months of usable time on my Mac. (I have been dealing with Apple Support since last June.) Please help. I just want my Mac to work. I know that this is just a fluke; and that my woes are the exception, not the rule.
Thanks
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)
MacBook Pro Mac OS X (10.4.8)

Your choices are to continue trying to work this out through your local Apple retailer or contact AppleCare directly.
There's little anyone here can do to help you. These Discussions are user-to-user help. All the available contact information is available by clicking on the Contact Support link at the bottom of this page.

Question about WAD 3.5 and Firefox 3.0

Similar Messages

Maybe you are looking for