QUESTION ABOUT WORKING WITH OUT A MIDI CONTROLLER

Can some one tell me how to use the computer keyboard to play the instruments?

I did this without one in Garageband, anything's possible!!
http://www.realworldremixed.com/remix.php?remix_id=Hjkd9Nqni4zx1ZLI
Best
Steve

Similar Messages

Question about working with an audio interface

Hi
I just bought an audio interface (tascam us-122l) and i have logic express 8 installed, so i've connected my guitar and my keyboard (via MIDI) to the audio interface, and i've read the user's manual but i still don't know how things work...
Is it possible to use the built-in speakers on my imac as a sort of "amplifier". So when i play on my guitar or keyboard, i can hear what i'm playing trough my imac.
This is what i did so far;
- installed the drivers and updated the firmware
- system preferences > sound > input and clicked on my audio interface (US-122L)
- LE8 > preferences > audio > devices > and i selected the US-122L as device
This might be a stupid question but i just want to record songs.
Thnx anyway.

Logic audio preferences assumes you want to use your interface as an output for monitor speakers - the standard way and the best way given that your internal spekers will be neither loud enough or good enough to act as great monitors. If you don't have speakers you will be able to hear what you have recorded through headphones connected to your interface. If you want to listen from imac speakers or audio out you do indeed need to change to "built in input" - this is just a name logic uses to refer to your imacs internal sound card (including input and output).
To separate the input and output for different devices you need to set up your aggregate device, which you should be able to do, though you say you can't.

Questions about iphone with/out the SIM card

Someone is selling me his iPhone and I might or might not use it as a phone.
If I don't put my At&t SIM card in can I still use Safari (over Wifi) and the ipod function?
If I do put the SIM card in can I use all the functions of the iphone without a data plan?

If you purchase a used iPhone and take the iPhone with you to an at&t corporate store, more than likely at&t won't charge you for a new SIM card to activate the iPhone with at&t.
When activating an iPhone with at&t, as a new subscriber or as an existing subscriber, selecting the unlimited data plan for the iPhone, which includes 200 SMS, is required at that time. If you are an existing at&t subscriber, this replaces any existing data plan and SMS plan you currently have and are using with an existing phone with at&t.
Some have reported that were able to cancel the unlimited data plan after the activation process, but this will eliminate visual voicemail - which are downloaded to the iPhone via at&t's data network only, and if downloaded anyway without the data plan, you will be charged by the KB for each messages downloaded to the iPhone. The same when accessing the internet other than when connected via wi-fi with the iPhone. If you access the internet via at&t's data or EDGE network without the unlimited data plan, you will be charged by the KB for all data downloaded and uploaded - when checking email, web browsing with Safari, Maps access, youtube, etc., etc.
You say you won't use the unlimited data plan, but you will likely want or need to use it more often than you realize. If you don't want the unlimited data plan, you may want to consider purchasing an iPod Touch instead.

Question about function with in parameters

Hello,
I have a question about functions with in-parameters. In the HR schema, I need to get the minimum salary of the job_id that is mentioned as an in-parameter.
this is what I am thinking but I dont know if it's correct or not or what should I do next!
create or replace function get_minimum_salary (i_job_id in varchar2)
return number
as
begin
SELECT min_salary INTO min_sal
FROM jobs
where job_id = get_minimum_salary(xy);
RETURN i_job_id;
end get_minimum_salary;
thanks in advance
EDIT
Thanks for your help all.
Is it possible to add that if the i_job_id which is the in type parameter does not have a minimum salary then use the following function to register an error:
create or replace procedure insert_error (i_error_code in number,
i_error_message in varchar2)
as
begin
insert into error_table (error_user, error_date, error_code, error_message)
values (user,sysdate,i_error_code,i_error_message);
end insert_error;
This function is basically to say that an error has occured and to register that error, at the same time I need to print out the error using the dbms_out.put_line.
Any ideas of how to do that?
Thanks again
Edited by: Latvian83 on Jun 1, 2011 5:14 AM

HI
I have made little bit changes in ur code. try this
create or replace function get_minimum_salary (i_job_id in varchar2)
return number
as
v_Min_sal jobs.salary%type=0;---- Variable declaration
begin
SELECT min_salary INTO v_ min_sal
FROM jobs
where job_id = i_job_id;
RETURN v_Min_sal;
end get_minimum_salary;
Regards
Srikkanth.M

Question about Communication with Oracle 7

Hi,
Generally we use Oracle Snapshots for Communication, but since Oracle 9.2.0.5 do not work with Oracle 7.1.5.2.4. we are thinking about do use Oracle Interconnect for this Link.
Now I have the following two Questions about Communication with Oracle 7:
1. Is an Adapter for Oracle 7.1.5.2.4 available?
2. From your experience, does it make sense to install Oracle Interconnect for implementation of only one read only Link with 3 Tables if an OAS for BI is available?
Thanks,
Hannes

1. The Oracle database adapter is for Oracle 8i and up. I checked the code needed in the database and doubt that will work in Oracle 7.
1. The other option Advanced Queuing also needs 8i and up.
2. For me it doesnt make sense that you want to connect to Oracle 7. Oracle 7 is unsupported and should not have to be developed against. Also the license costs for Oracle Interconnect ~17K without any discount is a bit steep for read only links to three tables. Having the OAS means you wont have to pay another additional ~17K for the apps server.

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

Hi
Secure Zone login feature will only work if you host your website with Business catalyst.
Please take a look to this as an alternative
Password Protect Pages Widget for Adobe Muse
Also, check this thread,
Re: Can I create a login/password protection in Muse for a HTML5 page or two?

Why my i pod is not working with out charger

hey, my i pod is not working with out the charger plugged into it?!

What do you mean? Please be more precised so I may help you father. If it is plugged in, but won't open. You must wait at least 5 minutes before using it again. Ipod need a certain amount of power for it to start. Or even when its plugged in but wont charge, make sure it is connected very well to the computer or the power outlet to the Ipod. Lastly, if you are charging at another place, for example in your friend's house. The voltage power may be different from where you mostly charge it from. But if it isn't plugged. Maybe it need to be charged?
Hope this helps.
~pnoypryde

Will the lightning to 30 pin adapter work with the irig midi interface?

will the lightning to 30 pin adapter work with the irig midi interface? Want to record guitar with garage band on ipad mini. need quick/easy way to connect USB to ipad mini

From both? Interesting. I like that though. I am looking for the controls to be on the iPhone rather than the stereo as it ***** finding songs this way. And yeah, $39.00 is a lot for this, and it is only roughly 8" long. Oh well, I will need it, so I will have to buy it. Thanks for the message back!

Sharepoint 2013 list view quick edit does not work with out remote API permissions

sharepoint 2013 list view quick edit does not work with out remote API permissions.
When I give Use Remote Interfaces - Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site it works which is not an ideal situation..
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

This is true. If you use Fiddler to watch the requests from the list view quick edit you can see CSOM calls. For example when changing a value in a cell, when you tab out you will see the SetFieldValue and Update method calls on the list item.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

A Question about Compatibility with Parallels

Hello, all. I wasn't too sure where to post this, and I saw someone else posted a Parallels question here so I figured it wouldn't be a big deal. I have a MacBook Pro 15 Inch that I bought in May this year, and I was wondering if I could use Parallels to install Windows XP on it. I'm not sure if it will work because Apple apparently designed my computer to only work with Windows 7 if I were to install it through Boot Camp, but since I'm not really in the mood to shell out two hundred bucks for that OS, I was hoping I'd be able to just get Parallels and install Windows XP without any post-installation issues (like being unable to connect to the Internet and such, like the problems one would run into through a Boot Camp install if they didn't install the drivers). Could I use Parallels on my Mac instead of Boot Camp and install Windows XP?
Also, I have a minor question that I think I might already know the answer to, but I just thought I'd ask anyway while I'm here. Could Parallels Desktop 4 work with my computer?

AxelRWolfe wrote:
Could I use Parallels on my Mac instead of Boot Camp and install Windows XP?
Yes.
Could Parallels Desktop 4 work with my computer?
Verify that you machine meets the below requirements:
Hardware and Software Requirements for Parallels Desktop version 4
Hardware Requirements
Any Macintosh computer with an Intel processor (1.66 GHz or greater). To run 64-bit
operating systems in virtual machines, an Intel Core 2 or later processor is required.
Minimum 1 GB of memory, 2 GB of memory is recommended.
CPU must support Intel-VTx Virtualization feature
Almost on all CPUs used in Mini Macs Virtualization is supported, but in several early Mac Mini models it may be disabled in firmware.
Please see article http://kb.parallels.com/en/5653 how to enable Intel VT-x Virtualization support.
Note: Your Mac must have enough memory to run Mac OS X and your Mac applications,
plus the memory required for the virtual machine's operating system and the applications
installed in it. About 300 MB of disk space on the boot volume for the Parallels Desktop installation.
About 15 GB of disk space for each virtual machine.
Software Requirements
Mac OS X Leopard v10.5.2 or later
Mac OS X Tiger v10.4.11 or later

A question about error with jasperserver for pdf and Apex

I have created a pdf report on jasperserver and I can call it from apex via a url and it displays fine. The url is this format {http://server:port/jasperserver/flow.html?_flowId=viewReportFlow&reportUnit=/reports/Apex/deptemp&output=pdf&deptNo=#DEPTNO#&j_username=un&j_password=pw}
However, I am trying to follow a stored procedure executed from Apex so it would not expose the username/pwd in the url like above.
If I am reading the apache error log correctly it is erroring in this piece of the code below where it executes {Dbms_Lob.writeAppend}
loop
begin
-- read the next chunk of binary data
Utl_Http.read_raw(vResponse, vData);
-- append it to our blob for the pdf file
Dbms_Lob.writeAppend
( lob_loc => vBlobRef
, amount => Utl_Raw.length(vData)
, buffer => vData
exception when utl_http.end_of_body then
exit; -- exit loop
end;
end loop;
Utl_Http.end_response(vResponse);}
The error log says this; HTTP-500 ORA-14453: attempt to use a LOB of a temporary table, whose data has alreadybeen purged\n
What is this error telling me and how can I correct it?
The stored procedure I am following is below but replaced the vReportURL with my url like above that works.
Thank you,
Mark
{CREATE OR REPLACE procedure runJasperReport(i_deptno   in varchar2)
is
vReportURL       varchar2(255);
vBlobRef         blob;
vRequest         Utl_Http.req;
vResponse        Utl_Http.resp;
vData            raw(32767);
begin
-- build URL to call the report
vReportURL := 'http://host:port/jasperserver/flow.html?_flowId=viewReportFlow'||
     '&reportUnit=/reports/Apex/deptemp'||
     '&output=pdf'||
     '&j_username=un&j_password=pw'||
     '&deptNo='||i_deptno;
-- get the blob reference
insert into demo_pdf (pdf_report)
values( empty_blob() )
returning pdf_report into vBlobRef;
-- Get the pdf file from JasperServer by simulating a report call from the browser
vRequest := Utl_Http.begin_request(vReportUrl);
Utl_Http.set_header(vRequest, 'User-Agent', 'Mozilla/4.0');
vResponse := Utl_Http.get_response(vRequest);
loop
begin
-- read the next chunk of binary data
Utl_Http.read_raw(vResponse, vData);
-- append it to our blob for the pdf file
Dbms_Lob.writeAppend
( lob_loc => vBlobRef
, amount => Utl_Raw.length(vData)
, buffer => vData
exception when utl_http.end_of_body then
exit; -- exit loop
end;
end loop;
Utl_Http.end_response(vResponse);
owa_util.mime_header('application/pdf',false);
htp.p('Content-length: ' || dbms_lob.getlength(vBlobRef));
owa_util.http_header_close;
wpg_docload.download_file(vBlobRef);
end runJasperReport;
/}

I am new to working with working with jasperserver to apex interfacing, and also using utl_http with binary data.
But I guess typing my question down helped me figure out a way to make it work for me.
I combined info from http://www.oracle-base.com/articles/misc/RetrievingHTMLandBinariesIntoTablesOverHTTP.php
and from http://sqlcur.blogspot.com/2009_02_01_archive.html
to come up with this procedure.
{create or replace PROCEDURE download_file (p_url IN VARCHAR2) AS
l_http_request   UTL_HTTP.req;
l_http_response UTL_HTTP.resp;
l_blob           BLOB;
l_raw            RAW(32767);
BEGIN
-- Initialize the BLOB.
DBMS_LOB.createtemporary(l_blob, FALSE);
-- Make a HTTP request, like a browser had called it, and get the response
l_http_request := UTL_HTTP.begin_request(p_url);
Utl_Http.set_header(l_http_request, 'User-Agent', 'Mozilla/4.0');
l_http_response := UTL_HTTP.get_response(l_http_request);
-- Copy the response into the BLOB.
BEGIN
    LOOP
      UTL_HTTP.read_raw(l_http_response, l_raw, 32767);
      DBMS_LOB.writeappend (l_blob, UTL_RAW.length(l_raw), l_raw);
    END LOOP;
EXCEPTION
    WHEN UTL_HTTP.end_of_body THEN
      UTL_HTTP.end_response(l_http_response);
END;
-- make it display in apex
owa_util.mime_header('application/pdf',false);
htp.p('Content-length: ' || dbms_lob.getlength(l_blob));
owa_util.http_header_close;
wpg_docload.download_file(l_blob);
-- Release the resources associated with the temporary LOB.
DBMS_LOB.freetemporary(l_blob);
EXCEPTION
WHEN OTHERS THEN
    UTL_HTTP.end_response(l_http_response);
    DBMS_LOB.freetemporary(l_blob);
    RAISE;
END download_file; }
Don;t know what I did wrong, but I could not create an 'on-demand' process to call my procedure. I did not understand what it means when it says 'To create an on-demand page process, at least one application level process must be created with the type 'ON-DEMAND'.
so I had to use a blank page with a call to my procedure in the onload - before header process and that seems to work ok.
Thank you,
Mark

Questions about editing with io HD or Kona 3 cards

My production company is switching from Avid to Final Cut Pro. I have a few editing system questions (not ingesting and outputting, just questions about systems for the actual editors - we will have mac pros with either kona 3 or io HD for ingest and outputs)
1) Our editors work from home so they most likely will be using MacBook Pros - Intel Core 2 Duo 2.6GHz 4GB computers with eSata drives to work on uncompressed HD, will they be able to work more quickly in FCP if they are using the new Mac Pro 8-Core (2 Quad-Core 2.8GHz Intel Xeon) or will the mac book pro's be able to hold their own with editing hour long documentaries, uncompressed HD
2) Will having an AJA Kona 3 (if we get the editors mac pros) or io HD (for the mac book pros) connected be a significant help to the editor's and their process, will it speed up their work, will it allow them to edit sequences without having to render clips of different formats? Or will they be just as well off without editing with the io HD?
I'm just trying to get a better understanding of the necessity of the AJA hardware in terms of working with the editors to help them do what they have to do with projects that have been shot on many formats- DVCPro tapes, Aiptek cameras that create QTs and P2 footage.
Thanks

1. with the IoHD, laptops become OK working with ProRes and simply eSata setups. Without the Io, they can't view externally on a video monitor (a must in my book). It will not speed up rendering a ton, nor will it save renders of mixed formats. The idea is to get all source footage to ProRes with the Io, and then the Io also lifts the CPU from having to convert ProRes to something you can monitor externally on a video monitor, and record back to any tape format you want... all in real time.
2. Kona 3's on Towers would run circles around render times on a Laptop... no matter what the codec, but the Kona does not really speed renders up. That's a function of the CPU and just how fast is it. (lots of CPU's at faster speeds will speed up render times).
I'd recommend you capture to ProRes with Io's or the Kona 3 and don't work in uncompressed HD. You gain nothing doing it quality wise at all. And you only use up a ton of disk space (6 times the size in fact) capturing and working in uncompressed HD, which from your post, you're not shooting anyway. The lovely thing about ProRes is that it's visually lossless, efficient, and speeds up the editing process. Mixing formats can be done, but it's better to go to ProRes for all source footage, and edit that way.
With either the Kona or the Io, you then can output to uncompressed HD tape... that's what they do for you no matter what codec you've edited in. ProRes is designed to be the codec of choice for all HD projects when you're shooting different formats especially... Get them all singing the same tune in your editing stations, and you'll be a much happier camper. Only reason to buy laptops is portability... otherwise you're much better off with towers and the Kona 3 speed wise.
Jerry
Message was edited by: Jerry Hofmann

Question about capturing with JVC GY-HD200U

I am looking at this particular camcorder, JVC GY-HD200U, and was wondering if there is any issues capturing footage into FCP6. Does any one own or worked with the JVC GY-HD200U or early model?
share you thoughts about this camcorder if you have worked with it.
much thanks

Excuse my naivety here, but how does one go about importing HDV 720 as 'pro res'?
Can this be done by changing the import / capture settings, or does it require transferring the material to HD?
I'm using footage from my JVC HD GY100 in 24p. I've spent over a week trying to import the material into FCP through a JVC BR-HD50 deck with absolutely no luck, and it's getting really frustrating!!
I'm dealing with over 80 tapes of footage, so I don't have the option of going through each tape and logging individual clips. I've been trying to import entire tapes at a time.
I keep getting a 'stream error' prompt when attempting to capture.
I've tried with both start / stop detect on and off, I've tried to 'capture now', which seems to work until the very end of the tape / capture, at which time another error is reported. I've also attempted to set in and out points a minute or two from the beginning and end of the tapes, then batch capture the logged tape. Again, no dice.
Unfortunately I haven't had luck with anything, and I'm getting very frustrated.
I'm not a professional editor, so perhaps I'm missing something very basic? I have no clue why this format is so difficult to import!! I've never spent over a week trying to figure out how to import footage!
I don't care whether each tape I import is an entire tape or cut up into clips at time breaks, but I can't seem to get anything!!!
I really appreciate anyone's suggestions here. I'm at my wits end.
And again, I don't usually do this type of work, so if you could describe in detail any suggestions / solutions I would be very grateful. Many thanks.

Question about connecting two monitors to Mid 2010 MBP

I have a Mid 2010 MacBook Pro (running OS X, 10.6.8), and I want to connect it to two ASUS monitors (VS228H-P) that have HDMI, DVI, and VGA interfaces.
1) Is this possible?
2) What parts will I need to make the connection?
3) Will I be able to close the lid without the MBP going to sleep?
4) Any recommendations for an external mouse and clickety-clack keyboard? (My preference is for wireless, but I'm open to wired, too).
If there are other recommendations for configuration (I'd like to spend less than $150/monitor. They won't be used for gaming, but for working from home and watching various media...)
THANKS!!!

Hi kishap8,
Have you made changes in the display settings to make the PC use both monitors? It doesn't extend the screen on it's own.
Here is an HP Support document on how to change display settings: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03366869&cc=us&dlc=en&lc=en&product=5309983
And here are a couple videos (for Windows 7 that is very similar to Win 8) on how to work with multiple monitors:
https://www.youtube.com/watch?v=Nj0RT8yVlUA
https://www.youtube.com/watch?v=WDQCXOSJGM0
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Advise about work with differents formats in fcp

If you´ve got media shooted in hdv and pal:¿Wich is the best way to work with it?.I mean the suitable sequence settings to work with both formats in a project.
Thanks.

Juanelo, please clarify your question... PAL is a television standard or system, while HDV is a shooting format.
Are you editing PAL based HDV for PAL delivery, or do you have PAL HDV footage mixing with NTSC HDV footage...and if so, where is the delivery system...PAL, NTSC or SECAM.
K

QUESTION ABOUT WORKING WITH OUT A MIDI CONTROLLER

Similar Messages

Maybe you are looking for