Question...audio clips being cut off

Hi...just started having this issue...audio clips, usually less than 20 seconds, are now being cut off at the last few seconds of the clip. Can't figure out wny it is happening or how to correct it. If I select Edit, Play Original, I can hear the full clip.

Welcome to the PPRO forum, soneman28. We're going to need some more info.
What version of PPRO are you running. Exactly (e.g., "6.0.5" or "7.0.1" = good; CS6 or CC = not good)
exactly what kind of clips? The file type. The audio codec. And their source, too.
if they're A/V clips (as opposed to audio-only), have you messed with the frame rate through the Interpret Footage dialog?
Do you hit this problem both in the Source Monitor and with clips that have been added to a sequence (i.e., playing from the Timeline/Program Monitor)

Similar Messages

  • Audio clips prematurely cut-off

    Hello there,
    I'm fairly new to Macs and Sountrack Pro so please bear with me!
    I'm currently tasked with cutting clips from long audio interviews. They're provided in .wma so I convert them to .mp3 using Switch. Once in Soundtrack Pro I'm cutting and trimming them, improving the sound quality, saving them as WAVE files and finally, using Easy WMA to convert them to mp3.
    The majority of clips have been fine but there are few particular clips which are cutting off prematurely. It doesn't matter how much allowance time I leave after the desired end point, (I've tried from 5 seconds to 50 seconds) it always cuts off at the same point - a point before the end of the sentence. Has anyone come across this before?
    Also, while I'm here, can anyone tell me what is the most effficient format to use audio in Soundtrack Pro? just that .mp3 takes a long time to decompress when opening. Of course it depends on the length of the audio but I was wondering if there is anything quicker?

    Your format choice might be part of the problem . . . and, you're doing alot of compressing along the way which will deteriorate audio quality.
    First, I would transcode the wma's to aiff's using 44,000, 16 bit, stereo. Then bring those into Soundtrack. You'll immediately solve your decomression issue and things should go much faster.
    Again, this might help the other issue, but I'm not sure. You'll certainly wind up with better quality audio.

  • Help - clips being cut off - 'arrow' feature vanished

    I'm using CS4.
    Unfortunately, I have no idea what the feature I need is called, hence part of my issue.
    Up until recently, when I used premeire, when bringing a clip right up next to another, these little arrows appeared and helped stop the clip directly next to the clip, without accidentally deleting over it. I have no idea how - but mid edit of a piece I was doing, this feature went away, and I'm forced to eyeball, which really sucks. If I hold down CTRL (PC user), I get the one that should force everything past the clip, however, this isn't working correctly either - instead of moving a whole clip like it would before, it chops clips in half and moves only the part wherever the file landed.
    Again, sorry I don't know what this is called, and I don't know if this makes sense. But I NEED this feature back!
    Actually, if you look at this video:
    http://tv.adobe.com/watch/learn-premiere-pro-cs4/getting-started-06-editing-your-video/
    It's that black line with arrow that appears as the guy is moving clips. That is what vanished.
    Thanks!!

    THANKS guys!!! It was indeed snap.
    Jeff - thanks for the insight as to how I turned it off in the first place (while I was saving clearly).
    I'm so happy! You guys rock!!!!!!!!

  • IOS 8.2 update resulted in the bottom of my 6plus phone screen (the wording below the 5 icons - favorites, recent, contacts, etc.) being cut off.  Fix?

    iOS 8.2 update resulted in the bottom of my 6plus phone screen (the wording below the 5 icons - favorites, recent, contacts, etc.) being cut off.  Fix?

    Hi there Melinda,
    As I understand it, it seems like a part of the screen isn't visible at the bottom. I would start by quitting all the running apps on the iPhone:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the device and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    I would next check to see if an Accessibility option enabled making the screen larger with iTunes:
    Use Accessibility features in iOS
    Connect your iPhone, iPad, or iPod touch to any computer with iTunes installed.
    In iTunes, select your device.
    From the Summary pane, click > Configure Universal Access in the Options section at the bottom.
    Select the feature you would like to use and click OK.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • IBooks Author in-line tables are being cut off

    iBooks Author in-line tables are being cut off at the bottom of a column, instead of flowing to the next column, or moving the entire table. 
    The entire point of marking a table as in-line, is to get it to move as text is inteserted before it.  But when that happens, nothing makes sure the table remains visible.  When the top of the table gets pushed to a new column, it reappears intact, but when half the table won't fit, it just disappears below the bottom margin.
    How can I prevent that?

    Actually I just did.  I gave up on this long ago, but with your reply I found a way to make it work.  It seems strange, but it works half way.
    First draw a text box, then inside of the text box, put your table.  Make the text box In-line.  If you add rows to your table, you need to make the text box bigger yourself, as it won't grow automatically.  When you type in front of the text box, when it won't fit on the column or page, the entire box is moved to the next column or page.  That is the half that works.
    The half that doesn't work, is that when part of the table won't fit, it would have been nice if the non-fitting portion was moved to the next column or page, with a new header row.  Maybe with time, Apple will fix that. 
    But at least it won't cut off half the table this way.

  • Making a slideshow - top of photos being cut off

    I've been trying to make a slideshow with some of my photos being in Portait mode as against Panorama and when reviewing
    my slide show the top of the photo is being cut off. This appears to be for only those that are in Portrai mode.
    Does anyone know how I can overcome this annoying aspect?
    Alan

    Make sure the slideshow setting isn't set to scale photos to fill screen.
    That will create black areas on each side of the portrait photos but will not cut off the top and bottom.
    OT

  • Why does the top and bottom of my clips get cut off?

    Hi, I'm new to iMovie and I've encountered an annoying problem. I imported all my movie files from my flash drive without any issues. I dragged a clip from the section with all the clips to the play reel. I previewed the clip, both normal screen and full screen, and both times the top and bottom of the clip was cut off. I tried it again with different clips but the same thing kept happening? Can anyone tell me why this happens because my head keeps getting cut off and I don't like it one bit.

    First, you can go into File/Project Preferences and adjust the aspect ratio of your project to either widescreen (16:9) or standard (4:3), to match your footage.
    You can combine footage that is widescreen and standard in the same project. In this case, you have to tell imovie how to handle the clips that do not fit the overall project aspect ratio. To do this, you can select a clip in your project and use the Rotate, Crop, Ken Burns Tool. If you select FIT, it will preserve the whole frame by inserting black bars (letterboxing). If you select CROP it will cut off the top and bottom. You can select the default for this in Project Properties.

  • Emails being cut off

    hi,
    some of my outbound emails are being cut off when the reach the senders. is this a common problem with notes? i think the setup is ok and it is only something that has happened in the last coulple of weeks?
    thanks
    R

    You are posting on the Snow Leopard > Mail and Address Book forum, where everyone is using Mail 4.x. You'll need to try posting over in the Leopard forum.

  • HT1725 What might be causing incomplete downloads of an album or songs within an album being cut off?

    What might be causing incomplete downloads of albums or songs within an album being cut off in itunes?

    If you live in a Region that allows re-downloading Music...
    Delete the Song(s) and re-download...
    Download Past Purchases
    http://support.apple.com/kb/HT2519
    If not... Contact iTunes Customer Service
    Apple  Support  iTunes Store  Contact Us

  • Why are pop-up windows too small, text is being cut off. Problem is occurring with webkinz

    When I go to webkinz, the pop-up windows are too small to display all the information in the box. Text is being cut off. It works fine with Explorer. This has not always been a problem-- but is giving problems in the lat month. It occurs when you sign in, not noticeable on opening home page.

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages
    See also:
    * http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
    * http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings

  • Portion of video being cut off when rendered

    I have changed my width and height to 612x612 for a instagram video. Each time i render my footage, the bottom portion of my video is being cut off how can i fix this?

    Thanks. Here's the export window. The area with the red tint is what im talking about

  • E-mail being cut off

    I have a Pavilion P6-2317 with a Officejet 4635. My problem is that I cannot print e-mail without the right side being cut off. Even print preview cuts off the right side.Yes stretch to fit is in. This is the same using Firefox,Explorer and Chrome. Please help. About to throw entire system out the window. Running Windows 8.1

    Hi murphyjr, sorry to hear that you are having issue with printing your email. What email program are you using? Have you always had Windows 8.1 on this computer or did you upgrade from Windows 7 or 8? Please write back at your convenience and I will be happy to help.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Imovie 11: When moving clips from event to project, the top of the video clip is cut off.

    I'm working with a new project. When I add clips from an event to the project window, the top of the video clip is cut off.  Quite a bit of it is cut off.  It happens on every clip.  The aspect ratio is correct and I've set the video to fit in frame.  How can I fix this?  I would really appreciate any help.

    You may have stabilization turned on in the project. On one of the clips, click on the small gear icon at the start of the clip and select Clip Adjustments. In the Inspector that opens, uncheck the box "Smooth Clip Motion" against Stabilization. If this fixes it for you, do the same for the other clips.
    Also, it's a good idea to turn off certain preferences in iMovie>Preferences (an iMovie menu item). In the Browser tab uncheck the boxes for both "Automatically stabilize clips that have been analyzed" and "Apply rolling shutter correction for clips that have been analyzed". See this picture:
    The stabilization process causes a zoomed in effect on the video, as it has to "average" the pixels in order to smooth any shaky motion. You therefore lose a certain amount of the picture, depending on the extent of stabilization applied. Here's what iMovie Help states (in part) about this process:
    "iMovie stabilizes video by analyzing the camera motion in the video and then moving the picture the opposite way to steady it onscreen. In this process, iMovie zooms in on the picture slightly. The amount of unstable motion in the clip determines how much zooming is necessary.
    Zooming in crops out some of the picture, but you can fine-tune the level of stabilization to strike the right balance between keeping the video steady and retaining as much of the picture as possible."
    John

  • Why are my song being cut off, not all just some?

    Some of my songs that I bought on itunes are being cut off when there is about 30 seconds left to the song, both on my iphone and my macbook.  I dont know why this is happening. any help would be grealty appreciated.

    Are the episodes being shortened when you publish to a local folder and launch them in the browser as well as when published to the server? See this page under "Troubleshooting"...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
    If the local files are OK it would suggest the problem is on the server. Otherwise you need to troubleshoot iWeb.
    If the problem is files that are too large, you can reduce the sampling rate and/or convert to mono if the content is mostly speech rather than music.

  • Officejet Pro 8600. faxes being sent or received are being cut off.

    I have a OfficeJet Pro 8600. Most (8 out of 10) faxes being sent or received are being cut off.  I or they only receive half the sheet.  HELP!!!

    Hello bonnie753, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having fax issues.  I would like to assist.  Are you using the fax line that come with the printer? Are you plugged direct into a telephone wall jack or are you running into a modem?  Do you have anything between the printer and the wall jack on the fax line?
    I would suggest performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would also suggest changing a few settings under your fax menu on the front panel of the printer:
    -Go to your setup menu
    -Select Fax settings
    -Set fax speed to slow
    -Turn off Error Correction Mode
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

Maybe you are looking for

  • Accessing the bean in JSPDynPage of PAI event

    Hi friends,    In the PAI event of JSPDynpage component iam accessing the bean thru the following stmt.   dynpagebean myNameContainer=(dynpagebean)myProfile.getValue("MyNameBean"); What string have to pass in the getValue() method? Iam giving the inp

  • Illustrator 32-bit will not update to 17.0.1. Get U43M1D204

    Hi, I am running a Windows 7 64-bit machine with the latest updates and Adobe Cloud will not update the Illustrator 32-bit CC version to the 17.0.1 update even though I am logged in to the creative cloud.  The 64-bit of Illustrator CC update just fin

  • Why can't i sync my music to my iphone?

    everytime i sync my iphone to my computer, it resets my contacts and notes. i also can't sync music to my iphone and i dont know why, please help!

  • Disappearing Digital Signatures

    Our drafting group creates multi page sketches, each being a separate PDF file. Each page (PDF) is inserted in to a single PDF file as a composite document. Individual pages are revised occasionally and digitally signed off. The old revision is extra

  • Novice Question-Can users insert or delete pages?

    Hi hoping someone can help, I have created a form with a simple table for staff to use as a report. Some will need one page and others 2 or 3 is there anyway to have the user insert a new duplicate page if they need to? thanks in advance