Question: Calendar posted apointments and bold dates

The normal behavior for group wise when one adds an appointment for the calendar is to show the date of the appointment in bold on the 'Calendar View'. I.E. the panel of small month calendars on the left of the main calendar panel, between the folder panel and the main calendar panel.
It would be nice for me, if there was a way to designate some posted appointments to not cause the days in the Calendar View months to be bold. I use posted appointments to block off daily time I do not want to be available for meetings. But since I have these times blocked off for every work day, ALL the days in the Calendar View are bold. Thus I get no benefit of being able to glance at the Calendar view and see what days coming up have meetings. Thus, it would be nice if I could designate some appointments in some manner so that they don't display in this way.
Any chance that this exists as a feature. Or am I too unique again and want some software feature that nobody else cares about?

iskinner,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

How to print both normal and bold data in a single line

Hi ,
I have requirement wherin the data need to be displayed in a single line.
FAX: Z8525_text.
where FAX needs to be in bold and Z8525_text is a standard text and it shoould not be bold , both of this needs to be displayed in
a single line.
Can you let me know how to print both normal and bold data in a single line one of which is coming fro standard text.
Regards,
Senthil

Hi Senthil,
If you are using smartforms, have a character format created for BOLD and apply it to the text you want to highlight. The remaining text of the line could be applied with a Character format which is not highlighted.
Try and revert in case you need further assistance

Question about Payment term and due date

Hi experts,
I encouter a question about payment term:
I have the payment term ,the baseline date,document date and posting date.How can I get the due date??Is any SAP function module can calculate the due date?
Thanks a lot in advance.
Villy.Lv.

Hi guys,
we can use this FM FI_TERMS_OF_PAYMENT_PROPOSE to get the Days for net due date and add it to base line date,then we get the due date.
BR and thanks a lot.
Villy.Lv.

Waveburner; a few Questions regarding track files and Session Data

After a bit of negotiating, I'm almost ready to burn. Was having problems with file locations and discovered that i had multiple files in different locations. Those have been eliminated and all relative track files are in one place now with the Song Data File as well.
I then re-imported the individual aif tracks only to find that all of my fades and edits are GONE. It appears that I may have to DO THEM ALL OVER AGAIN! Please tell me that there is a work around.
Is it possible to import only the Session Data related to the fades and edits(everything but the actual audio files), so as to avoid all this "do-again" work?
I was also wonder if it is necessary, or perhaps a good idea, to change the File INFO for each of the individual audio track files from "OpenWith" iTunes (default setting) to "Open With": WAVEBURNER ?. (selectable on the aiff files, "Show More Info" window
Currently the aif files are set to "OpenWith" iTunes (default)
One last question please.
Is Waveburner really up to snuff? How many people are using this for Mastering and Burning CD's? I'm about to start inserting some AU Mastering Plug Ins and I'm hoping for the best. Any other suggestions are greatly appreciated.
G5 Dual 2.0/PBook G41.5Ghz/LogicPro7 Live5 Reason3.0 PansncDA7 TascamFW1804 Mac OS X (10.4.7)

You're grammer isn't bad jord, it was I who asked a plethora of questions under one Subject heading.
When i open the project file(.wb3),
The prompt says;
"Please choose a replacement from the list below:"
/Volumes/320GB HD/Users/ahuihou/.Trash/1 Track 01.aiff
/Volumes/320GB HD/Users/ahuihou/.Trash/2 Track 02.aiff
/Volumes/320GB HD/Users/ahuihou/.Trash/3 Track 03.aiff
/Volumes/320GB HD/Users/ahuihou/.Trash/4 Track 04.aiff
/Volumes/320GB HD/Users/ahuihou/.Trash/6 Track 06.aiff
As you can see the files are in the trash.
The first problem is that there are no actual files in the trash. Just an icon of a CD Disc which was dragged there to eject it, It is no longer in the disc drive/tray. Perhaps i should put the disc back in the drive and then update/replace the files afterwords. (The CD is scratched.)
The strange thing is that i can still preview the track that's in the trash by selecting More Info and playing it on the little Quicktime player bar. I guess the file is in a cache somewhere?
I've looked everywhere on all drives for the specific files but can not find them anywhere.
In the Replacement prompt there is a place that I can check to "Search in the same folder for subsequent files" button on the "Replacement" prompt.
which "same folder" is it refering to?
The Trash folder where the old files are or the Folder where the actual .wb3 project file is? I do have all of the correctly named song files/regions in the same folder with the project file.
maybe i should just start again. i'm not one to give up easy though and would much prefer to "beat" the computer at the game.

How can i swap the content such as messages, calendar entries, apps and app data between two iphone 4s?

I have a Iphone 4s and my friend has one too and we want to switch phones but do not want to lose any data or message or calendar entries, we want the same exact content avaliable in my phone swapped to his and his to mine. how can this be done?

Back up your phones onto your respective computers with iTunes, swap phones, Reset them and when you connect it to iTunes, instead of "Set up as a new iPhone", click on restore from back up

Issue regarding posting period and due date and document date

Dear Sir,
when i am creating sales order/purchase order and in posting date /delivery date/document date
how it is allowing me to add the marketing document of date before 3 months. i have checked the box on document setting
block allow posting date.
please help me how to block the before and after posting date
thanks
Aditee

Hi,
I don't have $38.10.number in my query. Where did you get this field?
please follow below steps:
1. Run above query in generator. Sure it gives an error message and ignore this message.
2. save it under query manager
3. Assign this FMS at AP invoice posting date and set auto refresh when customer vendor refer is changed.
Thanks & Regards,
Nagarajan

Question about iphone apps and saved data.

So let's say I'm playing a game from the app store on my iphone and I beat it. Now I want to buy a new game but I don't have enough space to keep them both on my phone. So I delete the old one from my phone knowing it will still be on my mac. Then I play the new game and beat it and I start wanting to play that old game again. So I put the old one back on my phone and I lost everything I did before. Why? Is there a way I can take an app off my iphone without losing all the saved data?

Here's how it works (from page 179 of the iPhone iOS4 User Guide). You can delete apps you install from the App Store. If you delete an app, data associated with the app is no longer available to iPhone, unless you reinstall the app and restore its data from a backup.
You can reinstall an app and restore its data as long as you backed up iPhone with iTunes on your computer. (If you try to delete an app that hasn’t been backed up to your computer, an alert appears.) To retrieve the app data, you must restore iPhone from a backup containing the data.
To restore from a backup, see page 257 of the iPhone iOS4 User Guide

URGENT REPORT START AND END DATE

GUYZ help me how to generate a report with start date and end date, two text item or calendar rpresent start and end date, it will generate only the start to end date... plzz put the code guyss..
this is my code when i call my report in runtime only in client server .. i want to generate it wit start and end date but dunno newbie ..
Declare
v_Rep varchar2 (30);
repid report_Object;
begin
repid:=find_report_object('dept');
v_rep:=run_report_object(repid);
end;

Check this sample Code..
DECLARE
pl_id ParamList;
pl_name VARCHAR2(10) := 'repdata';
BEGIN
pl_id := Get_Parameter_List(pl_name);
IF Id_Null(pl_id) THEN
pl_id := Create_Parameter_List(pl_name);
Add_Parameter(pl_id, 'P_STARTDATE', TEXT_PARAMETER,:BLK_CTRL.P_TODATE);
Add_Parameter(pl_id, 'P_ENDDATE', TEXT_PARAMETER, :BLK_CTRL.P_CURRENCY);
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
ELSE
Destroy_Parameter_List( pl_id );
END IF
RUN_PRODUCT(REPORTS, 'D:\MMRROLDL.RDF' ,SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id ,NULL);
END;

What is the SAFEST SEQUENCE to convert from a Outlook/iPad/iPhone synced with MobileMe to syncing with iCloud (I have 10 years of calendar diary events and 3000 contacts) - I am worried about the data issues that have been posted about iCloud.

What is the SAFEST SEQUENCE to convert from a Outlook/iPad/iPhone synced with MobileMe to syncing with iCloud (I have 10 years of calendar diary events and 3000 contacts) - I am worried about the data issues that have been posted about iCloud.
This has worked fine with MobileMe with only a couple of minor glitches in the past.
Any experience doing this the "right" way?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Fix for Bolded Dates in Outlook 2010 Shared Calendars

Is there a fix for seeing bolded dates in navigation calendars for shared calendars In Outlook 2010 (when appts have been made on certain dates) as was the case in Office 2003?
Looks like in 2011 someone posted on the forum that it was being looked into, but has there been a fix? It's now two years later? I had put this on the Exchange forum, and they said to put it on the Office/Outlook forum. I've seen it both
places, but no answers yet. Trying here now as suggested.
Thank you!

Hi,
I can reproduce this on my Outlook 2010. It displays the same for shared calendars on Outlook 2013, so far I'd say it's by design rather than a bug.
Regards,
Melon Chen
TechNet Community Support

Is there a fix for seeing bolded dates in navigation calendars for shared calendars (when appts have been made on certain dates) as was the case in Office 2003?

Is there a fix for seeing bolded dates in navigation calendars for shared calendars (when appts have been made on certain dates) as was the case in Office 2003?
Looks like in 2011 someone posted on the forum that it was being looked into, but has there been a fix? It's now two years later?
Thank you!!

Hi,
According to your description, it seems that the issue is related to Outlook 2003. This forum focus on Exchange 2013. Additionally, Outlook 2003 is no longer supported in Exchange 2013.
I suggest we can ask this question in Outlook forums for more professional answers:
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
Thanks,
Winnie Liang
TechNet Community Support

Calendar from Now-Up-To-Date sync wtih iCal and iPhone

I've been struggling to sync my current Now Up To Date calendar with my iphone and I think I have a solution for at least a one-way sync. Here's a copy of my post from another forum. I hope it helps others....
Does anyone else have a better solution?
I've been using my Treo as a go-between for Now Up To Date and iCal with software from The Missing Sync. This seems to work as a one-way sync from NUD to my iCal. I sent an email to them asking for help and here's their reply:
Description of problem:
Hi. I've been trying to use your software to get my data from Now Up To Date (NUD) to iCal so that I can have it on my iPhone. I know you don't support the iPhone, but maybe you can see if my approach is valid at all. I have a profile in The Missing Sync that only uses the NUD conduit. It is able to get any changes to my Treo 700p just fine. Then I made another profile that only uses the Mark/Space Tasks and Events conduits to get that data from the Treo to iCal. Somehow it worked a few times, but not any more. Is my idea a good one? Should I keep trying or give it up?
Steps to Reproduce:
Here's my steps.
1) Profile named NUD Treo. Has active only the NUD conduit, set to synchronize. I run the sync from the Treo and all changes I made in NUD are transfered to the Treo just fine.
2) I change to the profile named Treo iCal. I have slected the two condiuts, Mark/Space Events and Mark/Space Tasks. I have it set to synchronize all categories. When I run the sync from the Treo, it works for a bit, but none of the changes show up in iCal. Even though the items show in the Treo's calendar, they don't transfer to iCal.
A couple of times when I did the transfer I saw a comment "pushing from handheld".... and on those syncs the data showed up. But it doesn't always say that and the data doesn't transfer on thos syncs.
The reply from The Missing Sync's Support:
Hello,
Yes, that procedure should work.
First, update to 5.1.2 if you haven't done so yet. http://www.markspace.com/ftp/missingsyncpalmos5.1.2.dmg
Then follow these directions to have the Palm overwrite the Mac's Address Book and iCal.
http://www.markspace.com/support/kb.php?x=&mod_id=2&id=2878

I've been struggling to sync my current Now Up To Date calendar with my iphone and I think I have a solution for at least a one-way sync. Here's a copy of my post from another forum. I hope it helps others....
Does anyone else have a better solution?
I've been using my Treo as a go-between for Now Up To Date and iCal with software from The Missing Sync. This seems to work as a one-way sync from NUD to my iCal. I sent an email to them asking for help and here's their reply:
Description of problem:
Hi. I've been trying to use your software to get my data from Now Up To Date (NUD) to iCal so that I can have it on my iPhone. I know you don't support the iPhone, but maybe you can see if my approach is valid at all. I have a profile in The Missing Sync that only uses the NUD conduit. It is able to get any changes to my Treo 700p just fine. Then I made another profile that only uses the Mark/Space Tasks and Events conduits to get that data from the Treo to iCal. Somehow it worked a few times, but not any more. Is my idea a good one? Should I keep trying or give it up?
Steps to Reproduce:
Here's my steps.
1) Profile named NUD Treo. Has active only the NUD conduit, set to synchronize. I run the sync from the Treo and all changes I made in NUD are transfered to the Treo just fine.
2) I change to the profile named Treo iCal. I have slected the two condiuts, Mark/Space Events and Mark/Space Tasks. I have it set to synchronize all categories. When I run the sync from the Treo, it works for a bit, but none of the changes show up in iCal. Even though the items show in the Treo's calendar, they don't transfer to iCal.
A couple of times when I did the transfer I saw a comment "pushing from handheld".... and on those syncs the data showed up. But it doesn't always say that and the data doesn't transfer on thos syncs.
The reply from The Missing Sync's Support:
Hello,
Yes, that procedure should work.
First, update to 5.1.2 if you haven't done so yet. http://www.markspace.com/ftp/missingsyncpalmos5.1.2.dmg
Then follow these directions to have the Palm overwrite the Mac's Address Book and iCal.
http://www.markspace.com/support/kb.php?x=&mod_id=2&id=2878

Where do i find daily posted question on sap abap and sap webdynpro abap

Hi
where do we find Daily posted questions on sap abap and sap webdynpro abap in scn sap so that i can go through the questions and answer them .

Hi,
Go to the Content tab of any space and click on discussions. Then you can sort them by date created or any other
For ex: This link for WDA discussions: - Web Dynpro ABAP
You can also click on Receive email notifications for any space to get updates on that space.
hope this helps,
Regards,
Kiran

Create a Behavior for Calendar in a WPF UserControl to Select and Unselect dates with one click

Hi to everyone,
I am developing an application with a WPF Client. This Client use the MVVM pattern.
In an UserControl the application must show some Calendars, so the user can select one or multiple dates.
For that use, I should implement some behavior that allows the user click once in a date and that date is selected (what already exists in .NET Framework) and with another click in the same date, that date is now unselected.
I've already made some searches and can't find anything useful.
This kind of behavior it is possible to implement in the Calendar Control? How exactly I do this?
Thanks for reading/helping
Rafael Duarte

You should be able to accomplish this by modifying the default template of the CalendarDayButtonStyle of the Calendar and handling the PreviewMouseLeftButtonDown of the Grid in the default template. Here is an example:
<Window.Resources>
<Style x:Key="CalendarDayButtonStyle1" TargetType="{x:Type CalendarDayButton}">
<Setter Property="MinWidth" Value="5"/>
<Setter Property="MinHeight" Value="5"/>
<Setter Property="FontSize" Value="10"/>
<Setter Property="HorizontalContentAlignment" Value="Center"/>
<Setter Property="VerticalContentAlignment" Value="Center"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type CalendarDayButton}">
<Grid Background="Transparent" PreviewMouseLeftButtonDown="Grid_PreviewMouseLeftButtonDown">
<VisualStateManager.VisualStateGroups>
<VisualStateGroup x:Name="CommonStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0:0:0.1"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="Normal"/>
<VisualState x:Name="MouseOver">
<Storyboard>
<DoubleAnimation Duration="0" To="0.5" Storyboard.TargetProperty="Opacity" Storyboard.TargetName="HighlightBackground"/>
</Storyboard>
</VisualState>
<VisualState x:Name="Pressed">
<Storyboard>
<DoubleAnimation Duration="0" To="0.5" Storyboard.TargetProperty="Opacity" Storyboard.TargetName="HighlightBackground"/>
</Storyboard>
</VisualState>
<VisualState x:Name="Disabled">
<Storyboard>
<DoubleAnimation Duration="0" To="0" Storyboard.TargetProperty="Opacity" Storyboard.TargetName="HighlightBackground"/>
<DoubleAnimation Duration="0" To=".35" Storyboard.TargetProperty="Opacity" Storyboard.TargetName="NormalText"/>
</Storyboard>
</VisualState>
</VisualStateGroup>
<VisualStateGroup x:Name="SelectionStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="Unselected"/>
<VisualState x:Name="Selected">
<Storyboard>
<DoubleAnimation Duration="0" To=".75" Storyboard.TargetProperty="Opacity" Storyboard.TargetName="SelectedBackground"/>
</Storyboard>
</VisualState>
</VisualStateGroup>
<VisualStateGroup x:Name="CalendarButtonFocusStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0"/>
</VisualStateGroup.Transitions>


</VisualStateGroup>
<VisualStateGroup x:Name="ActiveStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="Active"/>
<VisualState x:Name="Inactive">
<Storyboard>
<ColorAnimation Duration="0" To="#FF777777" Storyboard.TargetProperty="(TextElement.Foreground).(SolidColorBrush.Color)" Storyboard.TargetName="NormalText"/>
</Storyboard>
</VisualState>
</VisualStateGroup>
<VisualStateGroup x:Name="DayStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="RegularDay"/>
<VisualState x:Name="Today">
<Storyboard>
<DoubleAnimation Duration="0" To="1" Storyboard.TargetProperty="Opacity" Storyboard.TargetName="TodayBackground"/>
<ColorAnimation Duration="0" To="#FFFFFFFF" Storyboard.TargetProperty="(TextElement.Foreground).(SolidColorBrush.Color)" Storyboard.TargetName="NormalText"/>
</Storyboard>
</VisualState>
</VisualStateGroup>
<VisualStateGroup x:Name="BlackoutDayStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="NormalDay"/>
<VisualState x:Name="BlackoutDay">
<Storyboard>
<DoubleAnimation Duration="0" To=".2" Storyboard.TargetProperty="Opacity" Storyboard.TargetName="Blackout"/>
</Storyboard>
</VisualState>
</VisualStateGroup>
</VisualStateManager.VisualStateGroups>
<Rectangle x:Name="TodayBackground" Fill="#FFAAAAAA" Opacity="0" RadiusY="1" RadiusX="1"/>
<Rectangle x:Name="SelectedBackground" Fill="#FFBADDE9" Opacity="0" RadiusY="1" RadiusX="1"/>
<Border BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" Background="{TemplateBinding Background}"/>
<Rectangle x:Name="HighlightBackground" Fill="#FFBADDE9" Opacity="0" RadiusY="1" RadiusX="1"/>
<ContentPresenter x:Name="NormalText" TextElement.Foreground="#FF333333" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}" Margin="5,1,5,1" VerticalAlignment="{TemplateBinding VerticalContentAlignment}"/>
<Path x:Name="Blackout" Data="M8.1772461,11.029181 L10.433105,11.029181 L11.700684,12.801641 L12.973633,11.029181 L15.191895,11.029181 L12.844727,13.999395 L15.21875,17.060919 L12.962891,17.060919 L11.673828,15.256231 L10.352539,17.060919 L8.1396484,17.060919 L10.519043,14.042364 z" Fill="#FF000000" HorizontalAlignment="Stretch" Margin="3" Opacity="0" RenderTransformOrigin="0.5,0.5" Stretch="Fill" VerticalAlignment="Stretch"/>
<Rectangle x:Name="DayButtonFocusVisual" IsHitTestVisible="false" RadiusY="1" RadiusX="1" Stroke="#FF45D6FA" Visibility="Collapsed"/>
</Grid>
<ControlTemplate.Triggers>
<MultiTrigger>
<MultiTrigger.Conditions>
<Condition Property="IsSelected" Value="True"/>
<Condition Property="IsFocused" Value="True"/>
</MultiTrigger.Conditions>
<Setter Property="Visibility" TargetName="DayButtonFocusVisual" Value="Visible"/>
</MultiTrigger>
</ControlTemplate.Triggers>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</Window.Resources>
<Calendar x:Name="cal" CalendarDayButtonStyle="{DynamicResource CalendarDayButtonStyle1}" />
private void Grid_PreviewMouseLeftButtonDown(object sender, System.Windows.Input.MouseButtonEventArgs e) {
Grid grid = sender as Grid;
CalendarDayButton button = FindParent<CalendarDayButton>(grid);
if (button.IsSelected) {
Calendar cal = FindParent<Calendar>(button);
if (cal.SelectedDate.HasValue) {
cal.SelectedDates.Remove(cal.SelectedDate.Value);
e.Handled = true;
Hope that helps.
Please remember to mark helpful posts as answer and/or helpful.

Since loading mavericks my calendar posts events one hour late. That is, if mtg invite is for 9am it posts at 10am. my pc clock and time zone are correct.

Since loading mavericks my calendar posts events one hour late. That is, if mtg invite is for 9am it posts at 10am. my pc clock and time zone are correct.

Hey Armando Stettner,
Thanks for the question, and what a great question it is!
With time zone support on, you can edit an individual event and change the time zone for that event. This list will include options for your default time zones, UTC, and "floating" - the latter of which is what you are looking for. Floating changes the event to occur at the specified time, local time.
For information on changing an event's time zone, see the following resource:
Calendar: Change an event’s time zone
http://support.apple.com/kb/PH11531
I look forward to hearing how this works for you.
Cheers!
Matt M.

Question: Calendar posted apointments and bold dates

Similar Messages

Maybe you are looking for