Question concerning the state of licenses of a Windows 2008 R2 RDS server after disolving the Domain, the DC, and the AD.

Background: - several months back a Windows 2008 r2 domain existed with a DC, and an AD. Windows servers where apart of this domain. One of the servers being a Windows 2008 R2 server with Remote Desktop Services loaded. The server was properly
licensed for 8 User CALS. All was operating correctly. Since that time the domain has been removed, the DC removed and the AD removed. What is left are Windows 2008 R2 servers in a workgroup. Again, one being the Remote Desktop Server.
Q1. Can the functioning Per User CALs (totaling 8) remain as Per User CALs?
Q2. Am I required to switch them to 8 Per Device CALs?
Referencing: "Best practices for setting up Remote Desktop Licensing...." - Article 2473823
In the above article it states under "RDS HOST and RDS Licensing servers are in the same Workgroup" that "We can use ONLY Per Device CALs in a workgroup environment. So, you should install only Per Device CALs on RDS licensing server."
( Which in my case they are both the same server.
Any information regarding what licensing options that can be used on a workgroup RDS server would be appreciated.

Hi,
Yes, agree with the supporting article which you have commented. We can only use per device CAL under workgroup environment and if you want to use per user CAL then server need to be member of domain.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Windows 2008 R2 RDS Licensing Issue

I have Citrix Presentation Server 4.5 farm (with all of the application servers running Windows 2003) and I have just migrated from using a Windows 2003 server for the terminal services licensing to a Windows 2008 R2 RDS server for the licensing. We have
a number of thin-clients that connect to the Citrix farm and provide a kiosk for users. We have 85 per device licenses however we are only using 15 of those licenses (plans were made but never implemented to use the rest), so we have 70 available licenses.
The licenses are configured per device and as Windows Server 2003 licenses.
After the migration to 2008 R2, the thin-clients connected to the new licensing server without any trouble at all. As I monitored the licenses on the new server, each thin-client was given a temporary license first and then at the
next connection they got a permanent license. All of this I have been able to confirm through the event logs on the server.
However, what I get in the event logs of the new 2008 R2 licensing server an event with event ID 21 that says:
The Remote Desktop license server "ServerName" does not have any remaining permanent Remote Desktop Services client access licenses (RDS CALs) of the type "Windows Server 2003 - TS Per Device CAL". As a result, the Remote Desktop license server cannot issue
RDS CALs of the type "Windows Server 2003 - TS Per Device CAL" to the Remote Desktop Session Host server "vvv.xxx.yyy.zzz". To resolve this problem, verify that the Remote Desktop licensing mode configured on the RD Session Host server matches the type of
RDS CALs installed on the Remote Desktop license server. If required, purchase and install additional RDS CALs as needed for this Remote Desktop license server.
(Note I have removed the server name and IP address due to company policy.) I have confirmed that every server in my Citrix farm has its terminal services configuration set for "per device" licensing and I have also specified the name of the 2008
R2 server rather than allow the servers to automatically find the licensing server. I have confirmed that my 2008 R2 server is configured for "per device" licensing.
The IP addresses I have seen in the event log messages are the IP addresses of a Citrix server rather than one of the thin-clients, and so far every Citrix server we have has appeared in one of these event log messages. I have been able
to determine that this event does not occur when a thin-client is connecting up nor does this event occur when I remotely log into the server.
As I noted above we only have 15 thin-clients using the 85 licenses so we have 70 available licenses for the Citrix servers so why are we out of licenses? What is this message trying to tell me?
Thanks
Brent

Hi Bent,
According the Event ID 21, I think you might have the license connection issues with RDS CALs. I suggest you analyze some relative services and
make sure your network without any misconfiguration.
Hopefully, there is an article describes how to troubleshoot this license issue on the terminal server.
Event ID 21 — Terminal Services Client Access License (TS CAL)
http://technet.microsoft.com/en-US/library/A98D84AC-B824-4F00-BF58-3CFF23493BF9.aspx
By the way, the license of Windows Server 2003 does not support to assign CAL to allow user to access the Windows Server 2008. You should buy a
new Windows Server 2008 license to meet the requirement above if necessary.
Hope this helps.

Why dont you take ios 7 and take out a feature so the ipod 4 can have enough space to take it I suggest when you touch your screen and the keyboard appears and make the old way.

Why dont you take ios 7 and take out a feature so the ipod 4 can have enough space to take it I suggest when you touch your screen and the keyboard appears and make the old way.

We're all users like yourself, if you would like to leave feedback to Apple go to Contact Us at the bottom of this page then go to Feedback and leave your concern. iOS 7 requires 512MB of RAM. Only the iPod 5 has 512MB RAM. The iPod 4 only has 256MB RAM. Hope this helps, Good luck.

I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!

Hi b,
Have you restarted yet?

It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, w

It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!

Hi Vmanfromusa!
It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I have an IMAC and I'm running OSX 10.9.2. I'd like to store my Aperture /IMovie Libraries to an external hard drive. In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the externa

I have an IMAC and I'm running OSX 10.9.2. I'd like to store my Aperture /IMovie Libraries on an external hard drive. In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives. Is this possible? Can I set up a RAID 5 format for redundancy?

I'd like to store my Aperture /IMovie Libraries on an external hard drive.
That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
You must have backups on a different disk .. otherwise it is pointless.
Can I set up a RAID 5 format for redundancy?
No.. you can buy special USB and Thunderbolt external drives that support RAID..
BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
Raid will corrupt all copies of the files.. it is replicated across all disks.
Delete a photo it is deleted across all disks.. you have no recovery.
Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

The synchronisation of iphone 4S to windows 7/64 bit does no longer work; kalender, individual ringtones and contacts get not sychronized in both directions. I tried reset on working configuration, deinstallation of itunes - nothing worked

The synchronisation of iphone 4S to windows 7/64 bit does no longer work; kalender, individual ringtones and contacts get not sychronized in both directions. I tried reset on working configuration, deinstallation of itunes - nothing worked - what can be done to solve?

Couple of things to check:
You are using Outlook 2003, 2007 or 2010
You have selected to sync Calendars and Contacts with Outlook on the Info tab of your iTunes sync settings
You have selected your Outlook calendar as the default claendar on your iPhone (in Settings>Mail,Contacts,Calendars>Default Calendar)
If all that is correct and iTunes still won't sync correctly, you might have to try reinstalling Outlook. Another option is to enable iCloud syncing with Outlook (see http://www.apple.com/icloud/setup/). This requires Outlook 2007 or 2010. If you decide to sync using iCloud but sure to disable contacts and calendar syncing in iTunes on the Info tab of your sync settings. Do not try to sync with both Outlook and iCloud or you will end up with duplicates in your contacts and calendar.
For syncing Ringtones confirm that:
The file is really a ringtone (right-click the file in iTunes, select Get Info, on the Summary tab it should say "Kind: Ringtone".
You have checked each of the ringtones you want to sync
You have checked "Sync only checked songs and videos" on the Summary tab of your iTunes sync settings
You have checked Sync Tones on the Tones tab of your iTunes sync settings

Installing Printers from Windows 2008 R2 printer server using the Cname

Am having issues installing printers on workstations from the windows 2008 R2 print server using the DNS names. the servername and Full qualified Name works fine.
l have tweaked the Registry and Disabled the StrictNameChecking but still getting an error. this is the message am getting...
Printer Installation Failed
You do not have enough privilege to complete the printer installation on the local machine.
I found this KB and did exactly what is in the KB but stilll....
lhttp://support.microsoft.com/kb/870911/en-us
need help

Hi.
I think I solved this yesterday. We got 1 printserver, with an alias, which we had this problem to connect to. I noticed that there is a difference between x86 and 64bits system entries in the registry...
When you are having a 64bit system, you must use REG_QWORD instead of REG_DWORD, REG_DWORD is only to be used in x86 system! See below.
Windows 2008 server R2 64-bit
HKLM\SYSTEM\CurrentControlSet\Control\Print
= ”DnsOnWire” = REG_QWORD Decimal = 1
(reg add hklm\system\currentcontrolset\control\print /v DnsOnWire /t REG_QWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters
= DisableStrictNameChecking = REG_QWORD Decimal = 1
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v DisableStrictNameChecking /t REG_QWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters\
REG_SZ = OptionalNames = “aliasname” (C-name record in DNS)
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v OptionalNames /t REG_SZ)
Windows 2008 server x86
HKLM\SYSTEM\CurrentControlSet\Control\Print = "DnsOnWire" = REG_DWORD Decimal = 1
(reg add hklm\system\currentcontrolset\control\print /v DnsOnWire /t REG_DWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\Lanmanserver\Parameters = DisableStrictNameChecking = REG_DWORD Decimal = 1
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v DisableStrictNameChecking /t REG_DWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\LanManServer\Parameters\ REG_SZ = OptionalNames = “aliasname”
(C-name record in DNS)
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v OptionalNames /t REG_SZ)
Don't forget to reboot your system after these changes!
Best Regards, Mats

HT1925 I cannot install the latest version of Itunes under Windows XP because itunes.msi cannot be found in order to remove the older version (11.0.1.12) of itunes

I cannot install the latest version of Itunes under Windows XP because itunes.msi cannot be found in order to remove the older version (11.0.1.12) of itunes. Is there any other way I can accomplish an upgrade without using the Itunes.msi file?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Windows live mail having problum after joining in domain examples incoming is good but sent or outgoing is not there and also send mails are not exporting at the time of live mail exporting time?

windows live mail having problem after joining in domain examples incoming is good but sent or outgoing is not there and also send mails are not exporting at the time of live mail exporting time?

This is not usually related to AD issues, but it may be more of a DNS issue. I posted a request in your other thread to post an unedited ipconfig /all of the DC and of the client.
This may help use diagnose this issue and your other thread's printer issues.
Thank you,
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

SQL ENTERPRISE: The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database

The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?

Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

HT201407 I am trying to update the software applications on my IPhone 4S but the noticification keep bringing up the username that I don't know it's password even after I have resseted my username and pasword about 3rice. Whtels can I do to update my iPho

I am trying to update the software applications on my IPhone 4S but the noticification keep bringing up the username that I don't know it's password even after I have resseted my username and pasword about 3rice. What else can I do to update my iPhone applications ?

Settings > iTunes & App stores.
Tap the AppleID, log out then log back in with updated AppleID.

The battery of my iPad four drawn very fast after update to iOS 8.1 and the sensitivity of my iPad decrease until I cannot swipe it and is very lag please fix it immediately

The battery of my iPad four drawn very fast after update to iOS 8.1 and the sensitivity of my iPad decrease until I cannot swipe it and is very lag >< please fix it immediately

Hello alicelan,
After reviewing your post, I have located an article that can help with device errors. You may want to consider restoring your device to factory settings to resolve the issues you've described:
Use iTunes to restore your iOS device to factory settings
Restoring iOS software deletes all your data and content from your device, including songs, videos, contacts, photos, and calendar info.
Before you restore your device
Make sure you’re using the latest version of iTunes.
Use iTunes to back up your device. Transfer and sync any additional content to your computer.
Turn off Find My iPhone in Settings > iCloud on your device to disable Activation Lock.
Restore your iOS device
Connect your iOS device to your computer using the cable that came with it.
Select your iPhone, iPad, or iPod touch when it appears in iTunes. In the Summary panel, click Restore.
Click Restore again to confirm that you want to restore your device to factory settings and delete all data and content. iTunes will download the iOS software file and restore your iOS device.
After your iOS device is restored to factory settings, it will restart. Once it does, you’ll see the "Slide to set up” welcome screen. Follow the steps in the iOS Setup Assistant. You can set up your device as new or using a previous backup. If your iOS device has cellular service, it will activate after you restore.
Learn more
If you get an error message, find out how to fix most update and restore errors.
If your iOS device with cellular service doesn’t activate after restoring, find out how to fix activation issues.
If your iOS device restarts repeatedly or isn’t responding, for example if you see a stopped progress bar or no progress bar, put the device into recovery mode and restore it again.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?, I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?

I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?, I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?

Here is some information and troubleshooting steps from Apple:
http://support.apple.com/kb/TS1440

When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

Set up iMovie Theater and iCloud
In order to take full advantage of the capabilities of iMovie Theater, you must be signed in to iCloud. If you are signed in to iCloud, movies and trailers shared to iMovie Theater are automatically uploaded to iCloud. You can also turn off automatic uploading, and upload just the movies and trailers you want, or delete individual movies and trailers from iCloud. For more information about the Theater, see iMovie Theater overview.
If you sign out of your iCloud account on your Mac, all iCloud movies disappear from the Theater, but they are not deleted; the movies reappear when you sign in again. If you ever run out of space in iCloud, an alert icon appears in the top-right corner of your movie, indicating that you can’t upload new movies. For more information, click the icon. After you upgrade your iCloud storage or clear space, your movies automatically appear in iCloud again.
Hide
Set up automatic iCloud uploading
Choose Apple menu > System Preferences, and click iCloud.
Make sure you’re signed in, and then select the Documents & Data checkbox.
Click the Options button next to Documents & Data.
Make sure the iMovie checkbox is selected.
In iMovie, choose iMovie > Preferences.
Select the “Automatically upload content to iCloud” checkbox.
To turn off automatic uploading, deselect the checkbox.

Question concerning the state of licenses of a Windows 2008 R2 RDS server after disolving the Domain, the DC, and the AD.

Similar Messages

Maybe you are looking for