Question concerning WebService and certificates

Hi, well i'd like to get data from a WebService. Scenario is RFC to WebService in SAP XI.
Therefore i also have to use user&pw and a certificate key i got previously!
So i created the receiver channel and now i am stuck. There is the option User Authentification and Configure Certificate Authentication. What do i have to use and how to configure. I know i have to use the keystore-service in VisualAdmin, but how?!
I already read this: /people/rahul.nawale2/blog/2006/05/31/how-to-use-client-authentication-with-soap-adapter but it does not fir my needs actually.
Again, i have user&pw AND certificate-key (only key in plain characters!). how to use these 3?!
thx in advance, br

Hi Jens,
Go through following pdf. It will clear some of you doubts.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/964f67ec-0701-0010-bd88-f995abf4e1fc
-Pinkle

Similar Messages

Oracle Asset (Functional) Practice Questions for Interviews and Certificati

https://www.createspace.com/3495382
List Price: $29.99
Add to Cart
Oracle Asset (Functional) Practice Questions for Interviews and Certification Examination (Release 11i and 12)
Functional Consultant
Authored by Erp Gold
This book contains 150 Oracle Asset Practice Questions for functional consultants. Very useful for interviews and certification examinations.
Publication Date:
Oct 26 2010
ISBN/EAN13:
1456311581 / 9781456311582
Page Count:
94
Binding Type:
US Trade Paper
Trim Size:
6" x 9"
Language:
English
Color:
Black and White
Related Categories:
Computers / General

Reported as spam!

Question about webservice and wsdl file

Hi All.
I have this scenario , the customer wants to send some information as they happen
The customer wants to use a web service to our database(JDBC)
I understand that from this requirement , I have to develop the Object in PI , and create the wsdl file to send it to the customer , this wsdl file will have the URL and other information for the consuming of the webservice.
Now the weired thing is the customer insists that we should use their wsdl file , I am confused about this , I understand that when the customer send their wsdl file , it is because they will act as a receiver to our request , right ?
but if they want to act as sender , then the wsdl file should be sent from PI side based on the configuration.
My question is it possible to create a scenario based on the cunstomer wsdl file eventhough the customer is the sender .
if so what and how the URL will be.
Thanks.

Malu Mader wrote:
> Now the weired thing is the customer insists that we should use their wsdl file , I am confused about this , I understand that when the customer send their wsdl file , it is because they will act as a receiver to our request , right ?
> but if they want to act as sender , then the wsdl file should be sent from PI side based on the configuration.
refer Walkthrough - SOAP XI RFC/BAPI
your URL will be;
The inbound address for SOAP messages is: http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel
Under party:service:channel enter the party name, the service name, and the name of the communication channel. If no party has been created, enter the following: channel=:service:channel

Some installation questions concerning AS and 8i

I will be installing 8i Enterprise Edition so that I can work with 9i AS. I have read through most of the Installation Guide for Oracle 8i - Enterprise Edition Release 3 (8.1.7) for Windows NT. I have some questions that didnt seem to be addressed in the documentation.
How to access Web Site component?
Appendix A, 'Individual Components Available for Installation,' indicates that the Oracle Enterprise Manager Web Site component is not included in either the Typical or Minimal installations of Oracle 8i Enterprise Edition. Is it available through a custom installation, or how do I access this component?
Advanced Security questions:
That same appendix also makes it clear that one of the primary differences between the Typical and Minimal installations is all of the Advanced Security features (encryption and integrity support; authentication support; and so on). It seems that I will need the Advanced Security component, because I will be configuring a database that stores usernames and passwords. However, I will be working with Oracle Portal. Can security features be configured just through Portal and 9i Application Server, or do I need to use Advanced Security instead, or in addition to, Portal and AS?
From what I understand, Advanced Security works with SSL (Secure Socket Layers). Does this affect visitors' ability to access a Web application anonymously before login (doesnt interaction with an application in SSL require online exchange between computers of authenticated, encrypted digital certificates? I hope this question makes sense; I'm new to the topic.) Is there a short answer to this question?
Application Server instead of Oracle HTTP server:
I also saw in Appendix A that the Oracle HTTP server powered by Apache is included with both the Typical and Minimal installations. It's also bundled as a "Web listener" with the Oracle Enterprise Manager Web Site.
However, I will be installing 9i Application Server instead to work with the 8i database. Will this cause any conflicts? I'm just wondering if the Oracle HTTP server component can be excluded from the beginning, without doing a custom install. I did see on pg. 3-6 of the Installation Guide (under 'Oracle Enterprise Manager Web Browser Requirements') that Oracle Enterprise Web Site does support the Oracle Internet Application Server.
Also, I understand from the section on 'Mandatory Individual Component Requirements' that Advanced Security "requires preinstallation of an LDAP directory such as Oracle Internet Directory (provided on the component CD-ROM)." It refers me to the Oracle Advanced Security Administrator's Guide for further information.
Oracle Internet Directory:
However, I haven't been able to access the Security Administrator documentation yet for installation procedures since I haven't been able to successfully download 8i Enterprise Edition (with all of the supporting documentation) yet.
I looked at the online 8i documentation at http://technet.oracle.com/docs/products/oracle8i/doc_index.htm but did not see any reference to the Advanced Security Administrators Guide.
As for Oracle Internet Directory itself, I did just find the Oracle Internet Directory Administrator's Guide on the oracle8i/doc_index.htm page mentioned above - so that should help.
I also looked at the Oracle Internet Directory download page to see if links to documentation might be provided there, but saw that "Oracle Internet Directory Release 2.1.1.0 is delivered as part of Oracle8i Release 3" which leads me back to the 8i Enterprise Edition page where Ive been experiencing download difficulties. So far as I know, theres no evaluation-version CDs available for this software, though there are evaluation CDs available for 9i AS.
null

Urfaust wrote:
You can use the rankmirrors script to determine which is the fastest mirror for you.
http://wiki.archlinux.org/index.php/Mir … heir_Speed
@op - the tip that urfaust posted is contained in the beginners_guide wiki article. You should not attempt installing arch without reading this guide. If you have two computers, you can install arch on one while browsing to the guide on the 2nd.

Build dataguard two more questions. password prompt and certificate error

The fiirt two data guard instances are built. One is running fine the second I'm getting this error in the primarys alert log. it looks like it is a certificate error but I'm having a hard time nailing it down.
BTW: Instance is 11.2.0.1
Thread 1 advanced to log sequence 318 (LGWR switch)
Current log# 6 seq# 318 mem# 0: +DATA/sfs01/onlinelog/group_6.4762.769266689
SSL Client: Server DN doesn't contain expected SID name
Archived Log entry 706 added for thread 1 sequence 317 ID 0x799622d4 dest 1:
Thu Mar 22 12:46:48 2012
SSL Client: Server DN doesn't contain expected SID name
The third and final data guard instance I'm building is 3T and taking forever to restore. Two questions:
1) Can I suspend rman and restart it.
2) when I restart rman how do I keep it from prompting me for the password. I would prefer to put a nohup on a shell script.
Here is the script. Right now I'm running it manually but would relly to run with nohup so I can go get lunch.
rman target SYS@sor01_primary auxiliary / << EOF
run {
allocate channel C1 device type disk;
allocate auxiliary channel C2 device type disk;
allocate auxiliary channel C3 device type disk;
allocate auxiliary channel C4 device type disk;
allocate auxiliary channel C5 device type disk;
duplicate target database for standby nofilenamecheck;
release channel C1;
release channel C2;
release channel C3;
release channel C4;
release channel C5;
EOF

Hello (certificate error is vague. By that I mean whoever wrote that error message)
Can I suspend rman and restart it? I believe no, stop and restart should work.
Something like this, I use an env file can post if it helps :
#!/bin/bash
. /u01/app/oracle/dba_tool/env/DATABASE.env
echo "Starting RMAN..."
$ORACLE_HOME/bin/rman target SYS@sor01_primary auxiliary << EOF
run {
allocate channel C1 device type disk;
allocate auxiliary channel C2 device type disk;
allocate auxiliary channel C3 device type disk;
allocate auxiliary channel C4 device type disk;
allocate auxiliary channel C5 device type disk;
duplicate target database for standby nofilenamecheck;
release channel C1;
release channel C2;
release channel C3;
release channel C4;
release channel C5;
}My env file ( yours will be different ) use env to check you compare to your profile
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/product/11.2.0.2
export ORACLE_SID=STANDBY
export ULIMIT=unlimited
export ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:$ORACLE_HOME/network/lib
export LIBPATH=$LD_LIBRARY_PATH:/usr/lib
export TNS_ADMIN=$ORACLE_HOME/network/admin
PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/etc:/etc/X11/xserver/C:.
export PATHI run from the cron which is similar to nohup as far as env goes.
Best Regards
mseberg
Edited by: mseberg on Mar 22, 2012 2:32 PM
Edited by: mseberg on Mar 22, 2012 2:41 PM

Question Concerning Erase and Sync and Itunes backups

Earlier this year my Computers Harddrive exploded without me making a backup. overtime I have moved all my new data to a new Itunes library and now after just about everything has been moved My Itunes is telling me that for my 5 devices, That I need to do an Erase and Sync. If I were to first backup my devices in Itunes would I be able to recover everything after the Erase and Sync ( Notes, Contacts, Remiders,ect.) Also a side question, If I restore my phone from a backup, are the data in the Apps Lost
Sorry For Poor Grammar did this in a hurry

If the songs are still on your computer then you'll have to add them back into iTunes and rebuild your library. Once you've done that you can reload your iPod. Pressing "Erase and Sync" when iTunes brings up the dialogue window asking whether you want to replace the songs on your iPod with the songs in this iTunes does exactly what it says. If you linked to an iTunes with only a few or completely different songs it will have erased your original iPod song list, iTunes itself must have been empty at that point as erase and sync erases the iPod not iTunes. If you lost your songs entirely from the computer and the iPod there are some data recovery programs on the market. I've no personal experience of them so I can't say how effective they are, here's an example: iPod Data RecoveryBuegie - Recovering Songs
None of the recovery programs are particularly cheap so you have to decide if in your particular circumstances it's worth it to get your songs back. It may be if you have a lot of purchased tracks which you would have to pay to download again. If they came primarily from your CDs then it's most likely not as you can re-rip them.

Question concerning Selecting and Deselecting Toggle Buttons

Hello Everyone,
I am still relatively new to the adobe web suite (still in the trial period in fact). I am working on creating a mock-up of a main web page design to demonstrate and discuss with management. The decision associated with such would determine if we go forward with purchasing adobe products, continuing a redesign of our website among many other things.
The big issue that I am running into at the moment is creating a series of interactive thumbnails.
I have the following set up on the page:
- A section for the actual image (full sized) complete with a title and description provided at the side for one of potentially many topics.
- Below the topic/image section is a series of thumbnails, which the first one is set for full opacity and marked as selected. (All of these thumbnails are in a Custom Component and break down into a Toggle Button component each, if the image is unselected it remains set at a low opacity)
- When selecting one of the other thumbnails, I need it to change the image (this part works), select/set the thumbnail to full opacity (this part works as well, given it is a toggle button feature), and lastly unselect the previous thumbnail (causing it to go to a lower opacity, I cannot figure out a way to accomplish this one)
- In the future I intend to design side bars (left and right) for both thumbnails and the section above (effectively changing the topic to a new one)
The ultimate idea is to create articles, provided with thumbnails associated to the article at the bottom and to allow clean alternation between the thumbnails, and likewise be able to switch to a new article (with a new set of thumbnails associated to the new article) as well.
Any help would be greatly appreciated.
-Steven

I think I found the solution of my own question. I share it in the hope that it’ll be useful to other people. Remind that I use Cp 6.1.0.319. I modified the project as follows: 1) I unchecked “Visible in output” for the button “Audio Play” (Bt_play) 2) I modified the AA associated to the audio on/off buttons as descrived below: Action Name: Play Assign cpCmndMute with 0 Show Bt_Stop Enable Bt_Stop Hide Bt_Play Disable Bt_Play Action Name: Stop Assign cpCmndMute with 1 Show Bt_Play Enable Bt_Play Hide Bt_Stop Disable Bt_Stop In this way the two buttons in the same location work well as a real toggle button! Greetings Elena

Straightforward question concerning borders and frame position

Two small questions:
How would you create a frame ( or something similar) that does not have the standard blue bar on its top? I'm trying to code a slash screen and the bar makes it just look silly.
Secondly how would one predetermine where a JFrame showed up on the screen? Specifically, I just want to center it.
Thanks guys.

Use JWindow instead of JFrame for a splash screen, there's no title bar. And the code to center it:
Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
setLocation((d.width / 2) - (getWidth() / 2),
(d.height / 2) - (getHeight() / 2));

Question concerning Eclipse and Tomcat Plugin and JSP

I have a Tomcat-Project that I am working on in Eclipse and quite a few external JARs. Everything works fine, when I run my Test class within my project (in Eclipse). But as soon, as I am trying to call the jsp in my browser I get Exceptions: "java.lang.NoClassDefFoundError: org/apache/log4j/Logger" for example, which tells me that in the browser it can't find the JARs... I'm guessing something's wrong with the classpath but I was thinking that Eclipse would handle those things for me...
I've added the JARs to my project via Eclipse (Properties -> Java Build Path -> Libraries -> Add external JARs). And I've created a subdirectory for my jsp files and allowed my project to update the .xml file for the settings and all... Do I need to do anything else? What have I done wrong so far, have I forgotten to do?

I solved the problem...

Questions concerning OpenAL and SDL sound

Hi,
After having sound problems with Warsow, I wanted to rebuild OpenAL as it seemed to use OSS by default. However, the PKGBUILD currently in ABS does not work anymore, the download for the source is invalid. I wrote my own PKGBUILD for openal-soft, which seems to work OK so far (I just had to create a symbolic link for libopenal.so.0, as libopenal.so.1 is now created by default). This version linked against my alsa-libs works without problems. Would it be possible to to replace openal with openal-soft or at least change the PKGBUILD or is there a reason the old version is still the standard in the repos?
Another issue was sound in Urban Terror, which also seemed to use OSS by default. As this game only uses SDL Audio and cannot be compiled to use OpenAL (the flags are ignnored), I wondered why SDL uses OSS by default and not alsa. The current SDL-version is compiled with ALSA and OSS support, but it always used OSS. After rebuilding and reinstalling SDL with --disable-oss, it worked properly (read: I could play music and Urban Terror at the same time). I don't know if there is a configuration file for SDL somewhere, I found nothing in /etc/, but as ALSA is preferred over OSS nowadays, perhaps --disable-oss could be added to the PKGBUILD for SDL. Perhaps I built SDL from source with OSS installed using the standard PKGBUILD, and OSS is not enabled in the repo's SDL, but I think this could be updated nevertheless.

Yes, it does work, but I find it a bit irritating that OSS is default for SDL, as the majority of users use ALSA nowadays. Same goes for OpenAL according to http://icculus.org/lgfaq/#setthatdriver - perhaps this should be noted somewhere?

Question Concerning "Terms and Conditions"

Lately I have been pondering about whether I should put iPodLinux on my 3rd Generation iPod so that I can play videos on it and more that Apple doesn't allow you to do. I would normally do this in a heartbeat, only my Apple Care extended warranty doesn't expire for 5 more months. So, I looked at the "Terms and Conditions" for my warranty and found an interesting bit....
The plan does not cover:
"Damage to the Covered Equipment caused by accident, abuse, neglect, misuse (including faulty installation, repair, or maintenance by anyone other than Apple or an Apple authorized Service Provider), unauthorized modification"
That does on, but you can see the point I'm making just from that. According to the section I just read, it is not violating your warranty to install other software on your iPod, but Apple won't cover it if your iPod is damaged because of the software. So, say I installed iPodLinux on my iPod, and it was working fine, but one day my scroll wheel just stopped working... I could get my iPod repaired because it is still covered under the warranty, correct?
Please let me know if I am interpretting this incorrectly.
-Timo

^Thats what I suspected, only I couldn't find anything about just installing it and voiding your warranty, only that AppleCare doesn't cover damage resulting from manipulation of your iPod.
Of course, I wasn't reading the original iPod warranty...
-Timo

Question concerning Hibernate and EJB3 Annotation overlap

Consider the following, from the JBoss EJB3 Tutorial:
@OneToOne(cascade = {CascadeType.ALL})
@JoinColumn(name = "ADDRESS_ID")
public Address getAddress()
return address;
The above two annotations are applicable, using JBoss Libraries and Hibernate Libraries.
If one wishes to use both JBoss EJB3 annotations, and Hibernate with Annotations,
do annotations need to be used twice? Naturally, if Hibernate and Jboss identical
annocations are imported, there will be a compilation conflict error.
I know that full package names can be used on annotations to avoid that.
So, if I used the above code snippet, and I want to Hibernate using
the equivalent hibernate annotations, what should one ideally
do and why?

Zac1234 wrote:
I know that Netbeans automatically may build and deploy the completed
EJB using ant to gather resources behind the scenes.
which is why you shouldn't use it to learn about things. It hiding things from you means you don't learn all you need to know.
with V2.1, regardless as to the container software that I'm deploying the bean to,
am I now required to have an appropriate XML deployment descriptor,
yup, and the ANT build file is not it.
or is this something unique to jsps/servlets?Not the same thing. Different deployment descriptors for different applications.

Question Concerning Anchor Usage

New to Dreamweaver's web world and have a question concerning
Anchors and Drop Down Menus. Is it possible to have one of the
selections from my main navigation drop down menu Anchored to a
particular section of a page?
Thank You for any input.

OH, that. Duh.... 8)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"E Michael Brandt" <[email protected]> wrote
in message
news:fu5vq2$gs1$[email protected]..
> jcraw77 wrote:
>> New to Dreamweaver's web world and have a question
concerning Anchors and
>> Drop Down Menus. Is it possible to have one of the
selections from my
>> main navigation drop down menu Anchored to a
particular section of a
>> page?
>>
>> Thank You for any input.
>
> Sure, just make its link be href="#anchorname"
>
> --
>
>
> E. Michael Brandt
>
> www.divahtml.com
>
www.divahtml.com/products/scripts_dreamweaver_extensions.php
> Standards-compliant scripts and Dreamweaver Extensions
>
> www.valleywebdesigns.com/vwd_Vdw.asp
> JustSo PictureWindow
> JustSo PhotoAlbum, et alia
>
> --

Good afternoon ladies and gentlemen! My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In t

Good afternoon ladies and gentlemen!
My question concerns the impossibility to open RAW-files directly from the program Adobe Bridge. At the moment when you open a RAW-file from Adobe Bridge by double-clicking, RAW-file is opened only in Photoshop. In the settings Adobe Bridge - in "open RAW-files by double-clicking in Adobe Camera Raw» box is checked. When you try any changes in the settings Adobe Bridge system displays a message:
Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature.
The entire line of Adobe products on my computer updated to the latest updates. Previously, a family of products Adobe Photoshop on your computer is not set. Computer - PC, Windows 7 Enterprises.

<moved from Adobe Creative Cloud to Bridge General Discussion>

Webservice call failed during execution (SSL and certificates) on NetWeaver 7.30

Hey experts,
i need your help!
We make webservice calls to sap me with our own software.
We connect to our software via SSL and certificates e.g. https://host:50001/XMII/CM/POD/MEDialogsWeb.irpt
At the beginning the software runs without any problems and than we become the following message on all our webservice:
thats the webservice configurations
(configuration - connectivity - single service administration):
(configuration - security - authentication and single sign-on)
if we restart the software after the error display, the webservice call runs successfully again.
is it a timeout?
can anybody help us?
Thanks,
Markus
our system info:
NetWeaver 7.30 Java
SAP ME 6.0
software runs log looks as following
software doesn't runs log looks as following
security Log Entry
more info from security_00.0.log
#2.0 #2014 06 06 14:51:17:136#+0200#Warning#/System/Security/WS#
com.sap.ASJ.wssec.020142#BC-ESI-WS-JAV-RT#tc~sec~wssec~service#C0000A650AD826FF0000000100000BEC#3855850000000005#sap.com/me~ws#com.sap.engine.services.wssec.authentication#Guest#0##207092CAED7111E3A01A0000003AD5EA#23386e31ed7911e39d560000003ad5ea#23386e31ed7911e39d560000003ad5ea#0#Thread[HTTP Worker [@648881277],5,Dedicated_Application_Thread]#Plain##
Received unsupported callback: com.sap.engine.interfaces.security.auth.SetLogonTicketCallback
Received unsupported callback: com.sap.engine.lib.security.http.HttpSetterCallback
Read data of type username and value MEFLEX from wsse:Security header and set on module javax.security.auth.callback.NameCallback
Read data of type username and value from HTTP header and set on module javax.security.auth.callback.NameCallback
Read data of type password and value xxx from wsse:Security header and set on module javax.security.auth.callback.PasswordCallback
Read data of type password and value xxx from HTTP header and set on module javax.security.auth.callback.PasswordCallback
Authentication for web service ShopOrderService, configuration ShopOrderService using security policy BASIC*SSO2*_*_*ws failed: Cannot authenticate the user.. (See SAP Note 880896 for further info).

Hi,
the authentication for the second call is failing. Have you tried suggest log level from note 880896 - Web Service authentication failure? I would also try to use something like SoapUI to test if the issue is caused by your application or something wrong on SAP side. Also coparing messages for the first and second calls might give you answer.
Cheers

Question concerning WebService and certificates

Similar Messages

Maybe you are looking for