Question: Difference in performace between 256gb vs 512gb

A friend of mine today made funny of me by asking this question:
Besides the storage capacity difference,
what are the difference (if there are any), between a MacBook Pro Retina 15" with 256gb vs 512gb.
Same processor, same ram, same evereything. Exactly two identical machine, but one with 256gb and the other with 512gb.
Again, I know the storage difference, but there are any improvement in performace, speed and responsiveness?
Thank you
And tomorrow I can give him the answer :-)

No performance difference, only storage capacity.
Ciao.

Similar Messages

Automatic posting question: differences between bsd and prd

Hi to everyone. Although I searched for everywhere I know (including SAP help) I couldn't find a proper answer for my question "what are the differences between transactions "BSD - inventory posting" and "PRD - Cost (price) differences" ?". it seems as if both of thhese transactions are posting in case of cost differences between goods receipt and invoice receipt (and also there must be a stock movement). I will be very thankful vor a dtailed answer.
thanks in advance.
Mehmet Akif EREK
MM module responsible

Hai,
Both BSD & PRD are the Pre defined Transaction event keys used in a SAP Std system. TO understand the BSD, firstly know the BSX ( diff bet BSX & BSD ).
 Stock posting (BSX)
This transaction is used for all postings to stock accounts. Such postings are effected, for example:
o In inventory management in the case of goods receipts to own stock and goods issues from own stock
o In invoice verification, if price differences occur in connection with incoming invoices for materials valuated at moving average price and there is adequate stock coverage
o In order settlement, if the order is assigned to a material with moving average price and the actual costs at the time of settlement vary from the actual costs at the time of goods receipt
Because this transaction is dependent on the valuation class, it is possible to manage materials with different valuation classes in separate stock accounts.
Caution
Take care to ensure that:
o A stock account is not used for any transaction other than BSX
o Postings are not made to the account manually
o The account is not changed in the productive system before all stock has been booked out of it
Otherwise differences would arise between the total stock value of the material master records and the balance on the stock account.
Account determination of valuated sales order stock and project stock
Note that for valuated sales order stock and project stock (special stock E and Q) and for the transaction/event keys BSX andGBB, you must maintain an account determination to avoid receiving warning messages when entering data (purchase order or transfer posting) for valuated stock.
During data entry, the system attempts to execute a provisional account determination for GBB for valuated stock. The system will only replace the provisional account determination for GBB with the correct account determination for the stock account (BSX), in the background, if you enter the data for valuated stock at a later point in time.
Supplementary entry for stock (BSD)
This account is posted when closing entries are made for a cumulation run. This account is a supplementary account to the stock account; that is, the stock account is added to it to determine the stock value that was calculated via the cumulation. In the process, the various valuation areas (for example, commercial, tax), that are used in the balance sheet are taxed separately.
Now the details of PRD T/E key :
Price differences arise for materials valuated at standard price in the case of all movements and invoices with a value that differs from the standard price. Examples: goods receipts against purchase orders (if the PO price differs from the standard pricedardpreis), goods issues in respect of which an external amount is entered, invoices (if the invoice price differs from the PO price and the standard price).
Price differences can also arise in the case of materials with moving average price if there is not enough stock to cover the invoiced quantity. In the case of goods movements in the negative range, the moving average price is not changed. Instead, any price differences arising are posted to a price difference account.
Depending on the settings for the posting rules for transaction/event key PRD, it is possible to work with or without account modification. If you use account modification, the following modifications are available in the standard system:
o None for goods and invoice receipts against purchase orders
o PRF for goods receipts against production orders and
order settlement
o PRA for goods issues and other movements
o PRU for transfer postings (price differences in the case
of external amounts).

SAP SD--Difference of upgrade between SAP4.7 and ECC6.0

Hi friends,
Somebody can pls tell --Difference of upgrade between SAP4.7 and ECC6.0 in terms of sap SD module or any links for this.
Rahul

Hi Rahul,
Your question is a little general...Maybe you could go to sap help portal to search for the documentation for upgrading to 600.
As I know, we have some new functionality in release 600. For example, shipping point determination with storage location, automaticly outbound delivery creation after saving stock transfer order...
Also the screen is different for most list transactions like VA05.
Regards,
Smile

Can anyone tell me the difference in performance between CSS URL switching

first
Can anyone tell me the difference in performance between CSS URL switching and F5 Big-IP?
second
Can anyone tell me the difference in performance between CSS URL switching and alteon ?
third what is best overally?
i think alteon is best
is that right?
best regard

It looks like the primary question here is performance, in which case:Performance is not an issue, so long is it is sufficient. In the case of CSS 11000 and Alteon, performance fall within the same order of magnitude (supporting web sites with several billion hits per day.) F5 does not have sufficient performance, due to platform and OS limitations (Ive heard as low as 50 connections per second in complex configurations). The Cisco CSM posts up over 10x the performance at 200k flows/second.
Typically the primary concern is features, then CSS 11000 switches lead with a wide and flexible array of features that are not only helpful to network and web administrators, but well integrated too. CSS 11000 switches offer configuration through CLI, Web GUI, and XML. CSS 11000 collects statistics that can be exported to non-Cisco applications for billing and management.
The CSS11000 also supports URL load balancing and HTTP header balancing within one content rule, with complex matching. Further, it supports user agent, pragma/no-cache, host field, cookie field, language field, accept, accept charset, accept-encoding, and Connection within the http header field.
In addition, the CSS11000 matches up to 128 bytes with support of wildcards anywhere within the string.On the other hand, Nortel (Alteon) - HTTP header load balancing is not supported on the same VIP as URL load balancing. Eg. This means that a simulated WAP user cannot be directed to a server while load balancing "normal" browsers to their servers based on URL without using two separate VIPs. Only ONE http header load balance is supported on the entire switch. This limits you to either User Agent (WAP, Netscape, IE, Palm, etc), OR pragma/no cache (do not send the user to cache, allow (the user) to go to the origin), or Host field (allowing you to direct on domain name), or Cookie. Also, Nortel does not support the language field.
In regards to F5, many of the performance claims are based on HTTP 1.0 requests (most web sites today are not using HTTP 1.0), Many emerging applications rely on HTTP 1.1 rather than HTTP 1.0. Also, the BIG-IP cannot spoof the connection to detect the URL, cannot do NAT on the flow, and cannot maintain states for persistent connections.
Overall, I think CSS switches are the lowest cost to own, and most effective of all the load balancing platforms on the market.

Difference in speed between i5 and Core 2 Duo (same GHz)?

My two-year old MacBook Pro has a 2.4GHz Core 2 Duo processor and 4GB RAM.
The cheapest MacBook Pro introduced today has a 2.4GHz i5 processor with 4GB RAM.
Anyone have any idea what the speed difference might be between these two? Approximately?
And does software have to be re-written to take advantage of the i5? In other words: What do I stand to gain if upgrading today?

Read this page and it should answer your questions.
http://www.apple.com/macbookpro/performance.html
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Difference in value Between BW and R/3

Hi,
We are in the process of validating reports .We have observed difference in value for credit and debit amount fields in BW and for the same data is coming from standard data source 0EN_JVA_2 (Joint venture: Actual line item using delta extraction) we have done full data load. In the data source the data coming from a single field and that is spited based on debit/credit indicator in R/3.
I need your valuable input on where the problem is for the difference of value between BW and R/3.
Regards
Deva

Hi,
Is there any filterations in the IP?
Any data packet deletion activity in the start rountine?
Any update rule for the key figure is having routine with modifiying the value?
Kindly check.
In case if you are seeing number of records, always aggregation happens.
If the difference is in terms of quantity of the key figure values, kindly check the above three.
Kindly come to us so that we can suggest
Hope this helps
Janardhan Kumar

An anyone help me to find the difference and relation between the following

Hi,
can anyone help me to find the difference and relation between the following methods of Swing :
a) validate()
b) invalidate()
c) revalidate()
d) repaint()

You'd be far ahead by opening up the API and Java turorial and your course book and learning for yourself, rather than, asking other to do your homework for you.
But if you have andwers already to go, then post them and ask if you have drawn appropriate conclusions.

Amount difference (0.01) between GL and profit center reporting

Hi,
After we run 1KEK for ARAP transfer to profit center there is amount difference (0.01) between GL and profit center reporting for customere reconciliation account. We checked F.5D and rerun 1KEK this issue still exit.
Any idea for it? Thanks.

hi Kyle,
thanks for the effort, but it wasn't the thing i asked for ...
what i would like to find out is:
if CO area settings are set w/o profit centers, why the system still demands profit center assignment with cost center master data (ie.)
well, i can always turn off the message, but this isn't the solution i want to use ...
i will rather open one PC (along with dummy, of course) even though those are not used for the customer ... although, this will not solve statistical posting to cc with cost element category 11 ...
d.

Calculate Difference in Days Between two Dates

Hi,
I'm trying to figure out how to calculate the difference in days between two dates using JavaScript in LiveCycle. (JavaScript knowledge = minimal)
Where "Start_Date" and "Current_Date" are the names of the two dates in the Hierarchy palette. (both Date/Time Field)
*Current date is using the Object > Value > Runtime Property > Current Date/Time
I need a Text or Numeric field displaying the difference in days. (Difference_in_Days)
I've noticed the following code being pretty standard amongst other responses:
var
Start_Date = new Date(Start_Date);
var
Current_Date = new Date(Current_Date);
var
nAgeMilliseconds = Current_Date.getTime() - Start_Date.getTime();
var
nMilliSecondsPerYear = 365 * 24 * 60 * 60 * 1000;
I know there's code missing, and the above code might not be correct.
Please advise.

Where "DateField01" = user entered date field
Where "DateFiled02" = Current Date/Time (Runtime Property)
where "Subform" = the subform containing DateField01
My script now resembles:
var oneDay = 24*60*60*1000;
var firstDate = new Date(Subform.DateField01.rawValue);
var secondDate = new Date(DateField02.rawValue);
(firstDate.getTime() - secondDate.getTime()) / oneDay;
I tried adding:
app.alert(String(diffDays));
Although I assume the reason I didn't get an error is because DateField01 is empty when the form is opened.
If I swap in actual dates instead of fields it works perfectly.
When I use the fields I have no information populating after I enter a date in "DateField01"

What is the Major Difference in MM Between R/3& ECC?

Hi Experts,
What is the Major Difference in MM Between R/3 & ECC?
Regards,
ramakrishnareddy.g

hi,
ECC just the version of R/3
Pickup list - Batch where-used list display in transaction MB56
Usability enhancements for transaction MIGO for the posting of goods movements
New report : display list of invoice documents (MIR5)
Requirement prioritizations in materials management
Mass maintenance of outline agreements
Commitment plan for purchase contracts
Availability check in "Enjoy purchase order and requisition"
External services: putting service items in the purchase order on hold (changed)
Customizing transactions OX18 replaced by view
Goods receipt: new movement types in inventory management
Prepayment of invoices
Purchasing accounting information to the former SAP Business Information Warehouse
Automatic settlement of planned delivery costs with evaluated receipt settlement (MRDC)
Parking service items
Report MB5B : Stock on Posting Date
Stock Transfer Between Storage Locations
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
Thanks and Regards,
Swathi

Question How to switch between tabs automatically? for example every 30 seconds

Question
How to switch between tabs automatically? for example every 30 seconds

Tab Mix Plus has that feature.
*Tab Mix Plus: https://addons.mozilla.org/firefox/addon/tab-mix-plus/

What is the difference, if any, between Photoshop CS6 and CC?

What is the difference, if any, between Photoshop CS6 and Photoshop CC?

Thank you, Garima. This helps!
Larry
Date: Thu, 13 Feb 2014 14:14:08 -0800
From: [email protected]
To: [email protected]
Subject: What is the difference, if any, between Photoshop CS6 and CC?
    Re: What is the difference, if any, between Photoshop CS6 and CC?
    created by Garima.J in Photoshop for Beginners - View the full discussion
Hi LarryMeikle
The biggest difference between Photoshop CS6 and Photoshop CC is that Photoshop CC is subscription-based--you have to subscribe to Adobe's Creative Cloud service to use it. Also, Photoshop CC includes new features that were not in Photoshop CS6.
Let us know if that helps.
Thanks!
Garima
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6118812#6118812
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6118812#6118812
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6118812#6118812. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop for Beginners at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Is there any difference in quality between mp4 and m4v?

Is there any difference in quality between mp4 and m4v? I am figuring out how best to save old VCR files. Is the 264 category the best?

So, what would that software be? Anything that I mentioned, e.g., iMovie? Any Video Converter?
I'm a Mac user so I want files that play "natively" in QT X, QT 7, QL, iPod Touch, iPhone, iPad, and/or TV players. This means I want the H.264/AAC compressed data in MOV, MP4, or M4V file containers. I can use QT 7 Pro, MPEG Streamclip, and /or QT X to move MPEG-4/AAC compressed data to MOV file containers, MPEG Streamclip to movie M4V and MOV MPEG-4/AAC data to MP4 file containers, and Subler to move MP4 or MOV MPEG-4 AVC/AAC/AC3/Chapter data to M4V file containers. This is strictly a simple "copy" operation and no recompression of data is involved. (I.e., the quality is not changed.)
iMovie is a video editor and it forces an export conversion of your project once completed which can degrade quality. Have never used the Any Video Converter so I don't know if it has an audio and/or video "passthrough" feature for data already in a compatible compression formats. If it doesn't then any conversion it makes has the potential to degrade video content.
As to AVI, this is a legacy file container abandoned by Microsoft a dozen years ago in favor of their modernized WMV compression format/file type products. Compared to MKV, AVI is an outmoded/out-of-date container which I don't recommend you use unless you are a glutton for punishment. However, if you must use it, then you might try the AvidMux app. It can "copy" compatible content to a number of file container types—including AVI and MKV. Just don't blame me if its use creates more problems than it solves on current Mac systems.

E90 -any difference in specs between latest black ...

E90 -Anyone know if there are any differences in specs between the latest black model & the mocca and red devices? Is the latest 'flat' keyboard also available in mocca devices , or only in the black devices?Thanks

I don't know of any difference, and yes the flat keyboard is avalible in the other colours, Im on my second Mocca and this has the flat keyboard.

Difference and similarity between SAP XI and MQ?

Hi All,
Difference and similarity between SAP XI and MQ?
Pleas send docs if anybody has.
Regards

May be both has 2 letters!! XI, MQ.
On a serious note, you cant compare a middleware with a Queue.

Question: Difference in performace between 256gb vs 512gb

Similar Messages

Maybe you are looking for