Question- Digidesign 002 connectivity with logic pro 9 ?

Interested to know how digidesign 002 links with Logic Pro 9 ?

I have a 002 rack and it works flawless here. Running PT9 and have some error problems but I have run Logic all day and not even a hiccup. 32 in buffer all the time and lots of plugins.

Similar Messages

  • Digidesign 192 units with Logic Pro X

    Hi- is it possible to use 2/3 Digidesign 192 units with Logic Pro X or am i still relegated to 8 ch in/out w the D. core audio driver? I recently bought an Universal Audio Apollo 16 that I can use for mixing/editing on my iMac or MacBookPro but I have 2 192 units and am thinking of buying another to run on an 2009 Mac Pro for live recording or would I be better off just selling the 192's and purchasing another Apollo 16for 32 tracks for live recordings?
    I could only get 8 ch in/out with LP 9 and will need more inputs for the live recording rig and would rather use Logic than PT 8.
    Thanks!

    Logic Remote detects Logic Pro via Bonjour, which is done via a technology called "DNS Multicast". AirPlay, etc. all work this way. Make sure it has the most recent firmware and maybe google for issues with it.

  • Digidesign 002 Rack with Logic Studio

    Hi,
    I have recently bought a macbook pro and am wanting to record at my drum teachers house. He uses an iMac running Pro Tools with the 002 Rack. As i am wanting to record and mix everything in logic, not pro tools, can i use a firewire 800 to 400 cable to connect the 002 Rack to my macbook and then record through that? Or is the 002 Rack not compatible with Logic?
    Thanks in advance.

    Hi there,
    I believe in theory this should work.
    You will need to download a driver called "Standalone Digidesign CoreAudio Drivers" for Mac OS X to make the 002 work on your system called. As I understand it this is for folks that have Digi Design hardware but don't have PT installed on there system.
    Try this page for the driver that is at the bottom of the page.
    http://www.digidesign.com/index.cfm?navid=54&itemid=23375
    I am sure folks that own an 002 and use it without PT can be of more help here than I.
    Good luck,
    Jay

  • I can't get my Fantom X6 to connect with Logic Pro X since I updated to Mavericks iOS 10.9.2. Any Suggestions please?

    Hello Guys, I hope someone has experienced this issue or just know a fix or work around for it. Roland will not be developing new patches or what have you for the fantom x series and I figured thats the reason my keyboard is not working with this new OS. If you guys know a work around I would greatly appreciate it or tell what kind of keyboard or midi controller you are using so I could purchase one. Thanks

    X6 (via midi cable) plus good quality Audio/Midi interface (such as a Motu)  = No issues with LPX or Mavericks....
    In other words.. stop using USB to connect to Mac.... and you should be fine.

  • Questions about Novation Remote 25SL integration with Logic Pro 8

    Preface: I have to apologize in advance if this seems somewhat confusing. I'm sure some of the terms I'm using are just plain wrong - I'm somewhat of a n00b.
    I have a Novation Remote 25SL configured to use AutoMap with Logic Pro 8 from Novation's website and most things are working well. It's confusing at times because sometimes I find it hard to tell what mode the keyboard is in, but that's ok - it's the least of my worries. Based on what I've seen through reading the manuals and my own experimentation, I have a couple of questions:
    - Despite what the guy at the store told me, I can't seem to figure out how to select different kits from within the SL. For example, if I have a garageband instrument selected on a track - can I use the data/select knob on the SL as it is now, or do I have to program that somewhere, somehow? Or if I have Ultrabeat on a track, can I use the knob to select the different kits/banks?
    - Is there a way to control non-Apple AU plugins like the rest of those which ship with Logic? All the sexy looking ones like Ringshifter, Compressor, Overdrive, etc. It seems odd that Remote will go into Mixer Automap mode and be able to control the certain portions of the instruments, but not the plugins that are automatically loaded into the channel strip when the instrument is loaded.
    - I have a 25 key Remote. In Ultrabeat, I find the key maps miss a chunk of notes between where the drum pads end and where the keyboard starts (or vice-verse). Is there a way to get it so each key has a mapping? 25 keys in Ultrabeat, 25 keys on the board plus 8 drum pads - seems like there's lots of room.
    Thanks in advance for all your feedback.
    Message was edited by: Jason Lixfeld

    Follow-up research:
    Apparently there is a driver conflict between the AlphaTrack and the ReMOTE. So far I have got the ReMOTE working - sort of - in Logic using the following method which was published at Novation's Answerbase:
    1. disconnect the alphatrack.
    2. launch Logic and then turn on the ReMOTE SL.
    3. Go into the Environment window, and add a Monitor Object. Connect it to the Remote SL's ports 2 and 3.
    So far, this seems to at least get MIDI note input into Logic, but the Automap function seems a bit sketchy so far. This will depend on Novation updating Automap and the SL's firmware for Logic 8.
    As noted previously, there doesn't seem to be any AlphaTrack support in Logic 8 yet and it's up to Apple to make it work. They do support their TranzPort product, so with luck there'll be support in the next update.
    I'd really love to use BOTH control surfaces with Logic simultaneously -- the AlphaTrack with the Mixer and plugins, the ReMOTE with Software Instruments. I suppose it might take some interesting mapping but this doesn't seem like that strange a setup -- there are plenty of "mixer surfaces" like the M-Audio one, and the Novation Automap stuff is quite popular....

  • Do you know if the Digidesign 192 will work with Logic Pro X?

    Hi everybody! The question is simple, maube the answer too... Do anyone know if the Digidesign 192 I/O will (completely) work with Logic Pro X or if it needs other devices (such as controllers, internal or external card, etc.)? Thank you all.

    Hi Jacub,
    I have a 2i4 running Mavericks 10.9.2 on a Mac Book Pro, and my unit works properly, please make sure your run the unit with the class compliant mode app (click the link below):
    http://us.focusrite.com/downloads?product=iTrack+Solo
    Please contact Focusrite support if you have any more concerns.
    Best Regards,

  • Can I connect every USB-Audiointerface with Logic Pro?

    Hello there,
    please forgive me, if my english isn't so well.
    So, my "problem": I actually informated me over Logic Pro X, and by the provided Audiointerfaces, I didn't saw my Audiointerface.
    But - Can I simply connect a USB-Audiointerface with Logic Pro?
    So, hope you understand me,
    Best wishes, "toasbrot_55" (sorry for that name, i don't know when I did chosen this name)

    All Mac OS compatible audio interfaces work with Logic, and almost all USB interfaces are Mac compatible. So it depends on which interface you have (make and model), and which Mac OS version you use.

  • Logic remote of my iPad is not connecting anymore with Logic Pro X of my i Mac

    Logic remote of my iPad is not connecting anymore with Logic Pro X of my i Mac.
    Pls help
    tks
    Kind Regards
    Richard Garrell
    Belo Horizonte
    Brazil

    Hi Richard Gl , 
    Welcome to the Apple Support Community!
    I understand that your Logic Remote is not connecting. In this situation I suggest reading over the attached information and making sure that Logic Remote is set up correctly. I would also suggest trying to connect using Wi-Fi and Bluetooth.
    Logic Remote for iPad: Get started
    Cheers,
    Joe

  • I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

    I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
    Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
    Ken

    MUYconfundido wrote:
    Pancenter,
    Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
    The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
    Thoughts?
    Thanks,
    Tristan
    Tristan...
    This is what you have, correct?
    http://www.alesis.com/usbmidicable
    This from Alesis..
    "The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
    Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
    My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
    pancenter-

  • Is Line 6 Key Board Piano good with Logic Pro X?

    IS THE LINE 6 PIANO KEY BOARD 49 ANY GOOD WITH LOGIC PRO X?

    if it works with Garageband it will work with Logic Pro X as a midi keyboard.
    ....and please don't shout (Dont use all caps in your questions) .. It makes people type really small and timidly!

  • Alesis Midi Controller Keyboard setup with Logic Pro 8

    Hi, just wondering if anyone can help me... I'm a complete newbie!
    Recently bought a Macbook with Logic Pro 8 and would like to get set up for some home recording. The keyboard I want to use as a midi controller is the Alesis QS6 which has been in the wardrobe for some time. I have a Midiman USB midi interface.
    When I connect it all up, I can't get it to make any sounds from Logic, only from the keyboard itself, which I don't want. A friend suggested taking out one of the midi cables so now I have only Midi out from the keyboard running into Midi in on the Midiman. When I play the keyboard the notes register on the Transport bar and I can even record them but I cannot hear anything.
    Can anyone tell me what settings I need to have on the Alesis? Should the Keyboard Mode be on Normal, CH Solo or Out 1,2,3...16? I read somewhere I need to turn General Midi off, does this sound right? Is it something to do with midi channels - I don't even know how to tell which midi channel is selected in Logic.
    If anyone has experience with using the QS6 with Logic I would love to hear from you!!!
    Thanks!

    Run the Audio/MIDI Setup utility. Is your keyboard/MIDI interface displayed in there?
    If not, OSX does not see your MIDI device. Install it's drivers if it has them. If it doesn't have any drivers, your MIDI config might have got hosed. What keyboard is it?
    Unplug and replug it, directly, don't use a hub. Does it show up in the AMS utility now? Try powering it for an adapter, not from USB.
    If you still get no joy, I'll give you some procedures to try...

  • Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

    Can i use my mini Mbox 2 with logic pro 9 on iMac os x lion?

    Hi there,
    Did you find out anything more in regard to this?
    I have been using Pro Tools 8 with the MBox 2 connected to my iMac operating Leopard. It worked a treat for nearly four years.
    However the hardrive has just been replaced on the iMac which now has Snowleopard.  I don't want to have to update to Lion and then fork out £500 for Pro Tools 10. 
    I would be content to get Logic Pro 9 if I can attach the MBox 2 to it.
    Your advice would be appreciated
    PXC

  • I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

    I could really use some insight into this please also how many gigs of RAM should my power mac have it only has two right now and logic tends to glitch up majorly.

    My original question :
    I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

  • Using Mackie Control with Logic Pro 7 and Yamaha O1X

    I currently own a Yamaha O1x which is a mixer/control surface/audio interface that I use with Logic Pro 7. I am planning on selling the O1X and replacing it with the Mackie Control Universal as my DAW controller and using the Apogee Ensemble as my audio interface. I already have purchased the Mackie Control Universal and would like to begin using it instead of the O1X as my DAW controller, but while I am waiting for the Apogee Ensemble to be released I still need the audio interface capabilties of the O1X. The O1X uses Yamaha's MLAN protocol to connect to the G5. MLAN is a firewire interface that can transmit both audio and midi. Does anyone have a suggestion for a work-around solution so that I can use my Mackie Control Universal (which connects via midi cable) and only use the audio capability but not the control surface of the O1X via the firewire connection? I haven't been able to figure my way through this one and see if it is possible. I have already tried having them both hooked up at the same time, and the Mackie Control seemed to work fine but the audio on the O1X didn't seem to be connecting and functioning properly. I appreciate any help as I am anxious to use my Mackie Control.
    Thank you!

    You need to connect only the Audio and not the MIDI between your 01x and Mac. You can achieve this in mLan Graphic Patchbay-connect the cables between the Nodes in Audio part of a Graphic Patchbay, connect the Wordclock but do not make any MIDI connections. this way it should work as you want. the other way is to Make your regular connection from mLan Autoconnector and disable the MIDI ports that are dedicated to control the DAW by 01x by some freeware utility (01x uses port 1 for that...)
    As this is quite 01x specific, please visit 01xray.com/forums where you will find more help, or send me PM.
    As Apogee enssemble is expected to have great features, I would rather recommend the i88x instead of Enssemble (i88x has two Mic preamps-the best Yamaha produces (derived from Dm2000)VERY good converters (mLan is known for low jitter and it was tested with Rosseta by a mate from 01x forum who said (he tested it in store with other people) that i88x sounded better-may believe it or not...).The mLan Graphis Patchbay application allows you to patch connections between mLan devices and computer -very flexible. 01x already does almost the same as Mackie control and it is for almost the same price.... But maybe you are pi_ssed of waiting for new mLan drivers? I am just speculating....

  • USB Interface Not Working With Logic Pro 9

    Hello,
    I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
    I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
    I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
    Thank you.

    The problem lies with Tascam and their inability to write stable drivers for OS X...  and isn't anything to do with Logic Pro ..
    As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with  Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
    The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
    (Thanks to Paulypaulpaul for this)
    -uninstall your tascam driver 2.10
    -restart
    -install driver 1.03
    -restart
    -plug in your tascam
    -goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
    -install drivers 2.10
    -restart
    Follow each of the steps exactly.. including all restarts when indicated..
    ...and good luck...

Maybe you are looking for