Question for active X excel experts

My question is this how do I create multiple charts on the same page using Labview?  Please look at my program to get a better idea of what I like to do.  Basically I have 2-D array of clusters of 4 elements (Y1, Y2, X1, X2), which define the range of the plot.  Each row in the 2-D array has 2 clusters which will be plotted as series 1 and series 2 on a plot.  I am indexing that two dimention array to creat multiple plots, each of which contains two series/graphs.
JC
Attachments:
Excel New XY Chart21.vi ‏123 KB
snapshot41.jpg ‏3788 KB

Hi joeycao,
To get a general idea of which sequence of commands you'll need to use to create these charts and configure them as you like, your best bet is to record a macro in Excel, doing the steps, and then later examine which are used. You'll then be able to use invoke nodes to make these ActiveX calls in the proper sequence.
Please refer to this knowledgebase, Using National Instruments Software to Control Microsoft Excel with ActiveX
for a description of how to do this.
Hopefully that gets you started on the right path.
-Sam F, DAQ Marketing Manager
Learn about measuring temperature
Learn how to take voltage measurements
Learn how to measure current

Similar Messages

  • Questions for I/O interface experts

    I have few questions for I/O interface experts:
    I have a Power Mac G5 2.3 Ghz 8GB of RAM, PCI-X slots, and am running Final Cut Studio FC version 6. I currenly have an HD project on my timeline (uploaded directly form a P2 card via 400FW), and I'd like to be able to output on a HD VTR deck as wellas a BetacamSP deck:
    1) which AjA Kona cards (3, LHe, LH) is right for me?
    2) did you personally experience, or are you aware of any issues with this Kona card and Final Cut version 6? Any tips before I purchase?
    3) will this card allow me to output uncompressed HD, that is, the same quality I uploaded?
    4) in which of the slots on my back tower does it go? 64bit 100MHz or 64bit 133MHz?
    Cheers,
    Rinaldo

    I think FireWire is probably the best route.
    The main difference between the two seem to be that the 1814 has more inputs and the ADAT interface, the 410 has more outputs.
    So are you planning on recording, then go for the 1814.
    If you envision that 2 mics and 2 inputs is enough for your recording needs and you eventually want to mix surround you'd need the 410 as it is the one with enough outputs.
    If you want specific advice about interfaces I suggest you ask in the Logic forums as those users would be most experienced with this aspect of an audio system.

  • Question for Shane about Excel file

    Hi Shane,
    I was reading one of your blogs, and you mentioned that larry jordan has an excel file for timecode? Can you please give me the link where I can find that? I couldn't find it on his site.
    Thanks...

    Don't worry, I found it on his site, under Goodies...
    Thanks though !

  • Question for EXS24 instrument editor experts!

    Can anybody help with this?
    here's what I'm trying to do:
    I'm trying to combine a solo violin instrument and a solo cello instrument into one EXS24 instrument that has the violin in the higher octaves and the cello in the lower octaves, not overlapping (to use with my EWI).
    These are VSL (Vienna Symphonic) instruments, a different sample every half step, 3 velocity layers (different group for each velocity layer). So each instrument has around 150 audio samples.
    Here's what i tried so far:
    I opened the violin instrument, I added a new group and named it "solo cello pp". I drag dropped all the cello pp samples into the new group. I chose "auto map" in the dialog box.
    OK, when I look in the new group it got all the zone key notes right (zone key note matches the audio sample name)
    But... every zone has a key range of "Lo C-2, hi G8" so when I play the patch I'm hearing all the samples playing at once (because every zone has the full key range)
    OK ... I can just go type in the correct key range for each zone (like for the A#3 sample: "Lo A#3, hi A#3" etc.) but with 150 samples per inst., that's typing in a field 300 times! Kind of insane! and I plan to build several instruments like this (trombone/trumpet, bassoon/oboe etc.)
    Is there a smarter way to do this?
    I suppose I could probably just keep the violin & cello instruments separate, constrict their ranges so they don't overlap, have them on separate tracks, record enable both tracks, and play it that way. But it would just be more idiot proof to have it all in one EXS24 instrument.
    Any help would be appreciated.
    Tripp

    EXS is not the easiest to work with.........
    but , do this:
    bring two EXS's up on two different channels.
    load the vlns in one, the cello in the other.
    open the cello edit pane. switch to "group" and select all groups.
    open the edit menu and click on "copy".
    next, open the vln editor, then click on edit and select "paste".
    this should copy the cello in the vln pane.
    if they overlap, you'll have to move them an octave and probably limit the range.
    save as....... a new patch.
    DR9.

  • Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.   When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

    Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
    When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
    I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
    However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
    So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
    Can I fully change the name without doing a complete re-install of Lion and all my apps?

    One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

  • Question for the experts on Video problem

    We are away on holidays but didn't want to miss this opportunity to ask for help from the experts. I'm not sure if I have a problem with my motherboard or video card or both. I posted the problem previously but here it is again.
    I have an HPE-250f HP desktop computer which has worked well although has not had a lot of use. Shortly after purchasing it I got a real deal on a 17" i7 laptop which has been used much more than the desktop. Yesterday numerous Windows updates were installed and a couple of reboots to complete the installations. On occasion in the past Windows updates have caused issues but am sure they are not the cause of the current problem.
    Upon turning on the computer yesterday it sounded like an airplane taking off so pulled the side cover off and it was the fan on the video adaptor that was making all of the noise. I have never heard it anywhere near that loud in the past even when under very heavy usage. In addition there was no video signal so my first thought was the adaptor had died. I took the adaptor out and reinstalled it to make sure it was seated properly however no change. I took the adaptor out again and then uncapped the VGA and DVI connectors that are on the rear of the computer but I did not get a video signal from either of those two outlets either. I don't know whether those ports are enabled on the motherboard or in the BIOS as this computer came with an upgraded video card. Either way there was no video. I have another low end video card here that I don't think was ever used so installed it and again no video. The hard drive seems to be making the normal sounds you would hear when it is booting but again with no video can't really say what is going on.
    I am sort of out of ideas as to what to try next as without video you can't see if there are any error messages coming up, whether it is trying to boot or is actually loading Windows.
    I don't want to scrap the computer and I guess an option would be to try and find the same motherboard and replace it but I am hoping someone may have some suggestions as to whether there should be video from the built in ports that come capped from the factory. It just seems odd that there is no video from the original card, the built in ports, or a different video card. It is also odd the original video card fan funs flat out when you turn the computer on before it even starts to get warm. If there is a problem with the slot the card goes in one would think the built in ports would still have video but that is assuming they are actually enabled but again don't know if they would be.
    If anyone has any suggestions or if anyone knows a reliable place to buy the same motherboard that is in this computer I would appreciate that information.
    Thank you

    Finally back from vacation and took a bit of time to get caught up from vacation. It appears somehow two threads got started so will continue on with this one as there is more activity here. There is no video from the original video card reinstalled in the computer. There is also no video on either of the integrated ports after removing the caps and removing the battery, and tried two different monitors just to be sure. I have a friend with the same computer and he said there is no setting in the CMOS/BIOS to enable the onboard video so don't know if it has been permanently disabled or not but again no video from either of the integrated ports. Also If there is a speaker on this computer they have done a very good job of hiding it and i have never heard it beep in all the time i have owned it. I know at this link under INTERNAL CONNECTORS it mentions a speaker connection. I would install a speaker for the purpose of troubleshooting but I cannot find a reference anywhere that says which pins are for a speaker so if anyone would know where to find this information I would gladly install a speaker so we could troubleshoot further. http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4162190/model/4262654/document/c02014355 It is certainly a possibility that one of the updates caused an issue but it would be surprising as these were updates to Windows and not the BIOS, so one would think if the update was causing an issue it would be after the POST and when it was about to start loading Windows. I will try the suggestions listed above to the extent I can without a speaker connected but it would be great if someone can post a manual for the motherboard that mentions which pins or header has the speaker connections so I can install a speaker. I just heard back from my friend that has the exact same conputer and his has no audible beep when it starts either and am sure there is simply no internal speaker on this computer. Thank you

  • Question to assigning Source System for Activation

    We want to assign source system for activation, before business content-InfoObject catalog activation. The steps as follows:
    1.On the Data Warehousing Workbench: Business Content view from the menu choose Edit  Source System Assignment.->This step is ok, no question.
    2. In the Choose source system by default? dialog box select the checkbox in the column Default assignment in the row containing the source systems you need to load data from.->Now we can see BI system as default call DEGCLNT500 displayed, in my case we only connect one R/3 system call DHHCLNT100 to BI system.
    So, the question to that is shoud we select both R/3 source system and BW source system as default or just select R/3 source system as default and dis-select BW source system?
    Which one should we choose, both or only R/3 source system?
    Pls help, thanks!

    Hi hi ni,
    If what you are activating it's going to retrieve data only from R/3, then select R/3 and uncheck BW.
    You can change this whenever you want, if in the future you need bw, before activating, you can change it.
    This doesn't means where is going to get the data from, this is just to look for active (and replicated) datasources to connect to the business content you are activating.
    Hope this helps.
    Regards,
    Diego

  • Interview Questions for FI- General Ledger and Special Purpose Ledger

    Hi Experts,
    Can you guys provide me interview questions for
    1) FI-SPL (Special Purpose Ledger)
    2) FI-GL (General Ledger)
    3) COPA
    4) Cost Center Accounting
    Help in this regard is highly appreciated. If you have any Interview Questions documents, please email it to [email protected]
    Thanks
    Rajanikanth.

    I have some cost center qns
    How is cost center realted to profit center?
    What is a cost element group?
    What is a cost center group?
    What is the difference between Assesment & Distribution?
    What is a activity type?
    Award points if helpful

  • "information required for activation couldn't be obtained"

    Hey, my (original, 16gb) phone was working fine all day. I started to download 2.1, and tried to add some movies (I have manual synch enabled) when I got an unknown error message. I ok'd, and continued on, and now whenever I connect my phone, I get a message "The iPhone _ cannot be used with iTunes because the information required for activation could not be obtained from the iPhone." and in smaller text, "check that the SIM card is inserted and that it is not PIN-locked." The iPhone screen says to connect to iTunes, and restarting it didn't remove this message. I'm positive that the sim card is inserted, as I used my phone multiple times today, and I've never PIN-Locked my phone. Could this issue be caused by the phone being in airplane mode? I put it in airplane mode to use some old iPod speakers, and forgot to take it out. I've never gotten this before. Please help me.

    I may have figured it out. I called apple (which you may want to do rather than try this alone). I had them stumped at first but then he had me force the phone into recovery mode. I held down both buttons until I got the apple logo and it went black at which point he said it is completely off.
    Then he had me unplug it which it already was. Then I held down the home button and plugged it in until I saw the usb plug again then I let it go. As I say, you may want to call them and tell them what I did to fix mine. I am sitting here watching it as it restores from my backup. Good luck and reply back if you have questions. I will try to answer them but I am no expert.

  • Eight questions for my N8

    Hi,
    I  got my N8  two weeks ago and I LOVE IT!!!!
    Here is a list of my questions for your expert advice:
    Remote Lock. I had this option on my E66, how can I set it up on my N8?
    Can I adjust the touch screen sensitivity?
    Can I adjust the Scrolling Speed?  The scrolling function in my Messages and my Notes  is  too sensitive and fast;  If I try to tap-to-scroll, it just selects text for copying!  
    Is Swype available for our N8? I can’t find it on Ovi Store.
    Is there a Font Magnifier software available for the N8? I’ve  adjusted fonts to the largest, but they are still not large enough for my eyes.
    On Ovi Maps, how can I repeat the Voice Guidance? In my E66, I think I would   press the 4 key, but how do I do it in our touch screen?
    I’ve paired the N8 and can make calls in my Audi, but the Signal Strength bar, the Recent calls and more so the phone’s Contacts Directory are not shown on the car’s screen, what can I do?  
    I love watching on the TV, but I have found no way to play subtitle (.srt) files, or to adjust the screen size on the TV, with a Zoom or other function. Are those options available? 
    THANKS !!! 
    memos todo check if todo works defaultm
    WEB DO
    app flashlight
    charger adaptor?
    Transfer music
    dock list to ask transfer
    internet call download
    lock my phone
    active diverts note remove?
    say names of incoming calls
    screen sensitivity
    music transfer in phone
    TV Watch  Zook and Subtitles how? ke sometimes sound not ok, how to hook up first?
    Pairing in Audi does not show Directory on phone, last calls etc
    scrolling speed in notes and other applications
    font magnifier
    maps repear voice guidance press 4
    ma'ps traffic 8

    What drummer_tom is pointing to is the Dual Channel config for RAMs.
    Slot 1 + 3 or Slot 2 + 4 or all 4 slots installed, will give you Dual Channel performance and capacity. A win-win situation.
    As for the Blue and Purple Sata connectors, the 4 purple SATA connectors are controlled by Intel ICH9R chipset and the 1 blue SATA connector is controlled by Marvell controller. Only the Intel controlled SATA ports are able to RAID.

  • I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM

    I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.

    wesb
    What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
    Let us go through the typical drill so as to take nothing for granted.
    1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
    school or company network?
    2. Are you running the program as Administrator and is there any "domain" account involved?
    3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
    4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
    Let us start by ruling in or out any of the above, and then we can decide what next.
    Any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR

  • TS4268 hi my imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? can you please help me!!! Also saying that my apple ID password is inccorrect when its not!

    Hi,
    My imessage isnt working so I turned off imessage and now its been saying "waiting for activation" and has been for a long while now? Also saying that my apple ID password is inccorrect when its not! Can anyone help me?
    Thanks

    While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion.You should also post this question there.  https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

  • HP Expert Day - April 18, 2012: Got Questions? Ask the HP Experts!

    Thank you for coming to Expert Day – the event has now concluded.
    **To find out about future HP Expert Day events, check out this page**
    On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us.  We hope you will return to the boards to share your experiences, both good and bad.
    We will be holding more of these Expert Days on different topics in the months to come.  We hope to see you then!
    If you still have questions to ask, feel free to post them on the Forum – we always have Experts on the HP Support Forum to help you out.
    Do you have questions using or setting up your notebook, desktop PC, or printer?
    We’ll, we’ve got answers.
    Experts will be on the notebook, desktop, and printer and all in ones boards ready to answer your questions from Wednesday, April 18th 7:00am to Thursday, April 19th 7:00am Pacific Standard Time.
    How the day works:
    Come to the Forums and ask your questions. More than 200 experts will be on the Forums and will do their best to answer your questions and help you out. They may need to get some more information from you so please check the box "email me when someone replies."  An online conversation will be born!
    Why should you come to the Forums?
    Whether you own an HP Envy notebook, Photosmart printer, or an HP home desktop computer, there has never been a better chance to learn about your product.
    When do you have a chance to talk directly with the people who designed the product or wrote the manual for it?
    This will be your opportunity to connect with the best and brightest minds at HP for free.
    We’ll share our knowledge on the best ways to:
    Troubleshoot the issue you are having;
    Tweak your product to increase performance;
    Set up a Wireless network;
    Safeguard your PC from viruses and spyware;
    Choose the right power supply, upgrade your video card, or add the right amount of memory;
    Use the tools built into your product that can make it run better and fix common problems.
    And it’s FREE.
    It doesn’t matter how old the product is or what it is connected to. We will do our best to help.
    Expert Day will also be occurring on these forums:
    Enterprise Business Forum (April 18th from 7:00am to April 19th 7:00am PDT)
    French Forum (April 18th – 10am - 8pm Central European Time)
    German Forum (April 18th – 10am - 8pm Central European Time)
    Portuguese Forum (April 18th – 9am - 7pm Brasilia Time)
    Spanish Forum (April 18th – 9am - 7pm Buenos Aires Time)
    Hope to see you on April 18th!
    I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

    My HP, purchased in June 2012, died on Saturday.  I was working in recently installed Photoshop, walked away from my computer to answer the phone and when I came back the screen was blank.  When I turned it on, I got a Windows Error Recovery message.  The computer was locked and wouldn't let me move the arrow keys up or down and hitting f8 didn't do anything. 
    I'm not happy with HP.  Any suggestions?

  • Please answer a programming question for an admin

    I'm not a programmer (although my interest is growing), so I can't answer this question in a discussion regarding how Win32API w/OLE and COM is SO much better than programming for Unix/OS X applications.
    The original discussion was in regards to OS X's superior Unix based security, he devolved to this. Having only begun my venture into programming, his questions are a little above my head at this point. I'm also interested (as an amature programmer), how this would be accomplished in OS X/Unix.
    Thanks in advance.
    Here's his position:
    *(1st entry)*
    I have unsed Windows and many flavors of Unix and I have written programs in Assembler, Fortran, Pascal, Cobol, RPG, Smalltak, Basic, PowerBuilder, Delphi, C, C++, C#, Java, and Perl, and I have been programming for over 20 years, so I do have extensive knowledge about programming.
    So I have one question for you:
    If you had to build a business application that has to allow users to, spell and grammer check, and perform financial calculations, and render the HTML, how would you compare the effort to do this in Windows versus that in Linux, AIX, Solaris or any other Unix operating system?
    I can make this business application have these features in ONE DAY on Windows, because COM and OLE lets me, use Word to spell and grammer check, Excel to do the financial calculations, and IE to render the HTML!
    I make my living building complex customized business software, and Windows allow me to build these applications by myself in weeks, when it would take me and a team of programmers months to do these same things in Unix because of the lack of an the Win32 API, COM, and OLE, or I would have to BUY third party libraries that did these things, and deal with the licensing, versioning, and vendor problems that go with them, and none of those third party librabries would be close to Word, Excel, and IE in CAPABILITY!
    HONESTLY tell me and others reading this thread how you would go about create the customized business application I described above by yourself in a Unix instead of Windows, and tell us how many MONTHS or YEARS it would take you, or how you would have to BUY some other third party libraries to do what Word, Excel, and IE!
    Anyone who thinks a Unix has more CAPABILITIES than Windows, has never used Win32API/COM/OLE/.Net, and does not build customized complex business software for a living, because we people that do are the reason that you find some much customized business desktop software for Windows, and so little for any Unix.
    I have nothing against Unix, and it is great for simple business tasked server software, but for complex business tasked desktop software Windows with Win32API/COM/OLE/.Net wins hands down!
    *(2nd Entry)*
    A System administrators view of an operating system and an application developers view are entirely different, and the Win32API/COM/OLE/.NET simply make my job so much easier, and you simply don't understand because you do not have to deal with the "dirty' details of making what a user wants, which is why your definition of "integration" and mines are totally different!
    With the spell check you talked about, how will you keep in in synch with the dictionary in Word where the user is constantly adding and removing words?
    No, you would have the user to have to maintain two different spell check dictionaries, and you would totally ignore the grammer check requirement!
    Cutting and pasting data between applications is simple integration, and not the complex type that I am talking about.
    Can you make your application display and use the MacGourmet menus appear in its own window, and to access and use the MacGourmet functionality (ie. search for a recipe) in its own window?
    Give me one example of a Unix application that can display the menus of another application, yet alone control its features!
    Of course you can't, because you need COM and OLE!
    I am quite familiar with different flavors of Unix, but those operating systems do not have the rich API and program integration features namely COM and OLE that Windows has, because it violates the Unix idea of security by process isolation!
    Yes that idea of process isolation keeps the operating system safe from malicious code in applications and from one application taking the others down, but you lose the power of programs working together, and you simply cannot build the type of customized business applications that I build by myself, without reinventing the wheel over and over and without having a large team with lots of programmers.
    For example, my customers and millions of others spend all day working in Word and Excel, and the Windows idea that I can transparently integrate my complex business applications right in Word and Excel menu, and into their templates and macros, is why third party developers like me prefer Windows over Unix, regardless of how much better security in Unix is.
    Do not get me wrong, Java improves business application development on Unix, but unfortuantely it is not feasable to rewrite ever legacy application in Java, and Java does not integrate well with other programming languages.
    I used to code business application for both IBM MVS and Sun Solaris, and I never want to go back to those "bad" old days again, once I took the time to learn how to PROPERLY code using Win32API/COM/OLE/.NET!

    At risk of feeding the troll I'll wander in here:
    NOTE: Since this is an Apple programming boards and I have limited experience programming on traditional Unix systems (and most of that in college) I will confine my answers to the area I know.
    If you had to build a business application that has to allow users to, spell and grammer check, and perform financial calculations, and render the HTML, how would you compare the effort to do this in Windows versus that in Linux, AIX, Solaris or any other Unix operating system?
    I can make this business application have these features in ONE DAY on Windows, because COM and OLE lets me, use Word to spell and grammer check, Excel to do the financial calculations, and IE to render the HTML!
    Note that this scenario assumes the user has Microsoft office installed. The person argues that they don't have to purchase libraries to program but what they are effectively doing is simply transferring that cost to user. I don't have to purchase libraries but everyone of my users needs to. Good for you, very good for Microsoft but bad for your customer - IMHO. OK, I know "But all Windows business users have Office installed already." When it comes free with the system then I'll retract my objection.
    Under OS X and Cocoa many of these functions are intrinsic to the system layer and do not require any applications to be installed. Using Cocoa you can write a simple Word processor that has rulers, full font manipulation (including kerning, spacing and leading), Document Save and Load, Printing, Export to PDF as well as spell-checking in under 10 lines of actual code. Adding a custom file type and icon for full system integration will add another 5 minutes to your programing.
    In case you think I'm blowing smoke here is a tutorial from 2002 (yes, this has been possible for over 5 years) outlining the 8 line Word Processor build in Cocoa. http://www.stone.com/TheCocoa_Files/What_s_sofunny.html
    And yes, Cocoa also includes Webkit so I can add full HTML rendering by dragging in a WebKit window to my user interface. For an experienced Cocoa programmer this certainly sounds like less than a day of programming - in fact it sounds like a good tutorial for a middle-experienced training day or 2 day class in Cocoa.
    I won't include the link to the 1 line web browser you can build in Cocoa using Webkit because it's shorter than the description. Feel free to search for it if you want to.
    HONESTLY tell me and others reading this thread how you would go about create the customized business application I described above by yourself in a Unix instead of Windows, and tell us how many MONTHS or YEARS it would take you, or how you would have to BUY some other third party libraries to do what Word, Excel, and IE!
    BUT this is all done from the stock system that is on every OS X computer not simply those with Office installed. Obviously you'd need to add some features that were more complicated than this - because any halfway decent programmer could turn this stuff out - and polish takes a while but to meet the requirements of the challenge it would take 2 days tops.
    Is every *nix programming environment like this? I don't know I can only answer for the system that I have experience with and is the concern of this board. If you really have questions regarding *nix programming then I suggest you find an appropriate board and troll^H^H^H^H^H ask there.
    If you're ever serious about programming on the Mac feel free to stop by and actually take a look at it. I think you'll be surprised.
    =Tod

  • Expert Day - April 26th, 2011: Have questions? Talk to an Expert!

    Thank you for coming to Expert Day – the event has now concluded.
    **To find out about future HP Expert Day events, check out this page**
    On behalf of the Experts, I would like to thank you for coming to the Forum to connect with us.  We hope you will return to the boards to share your experiences, both good and bad.
    We will be holding more of these Expert Days on different topics in the months to come.  We hope to see you then!
    If you still have questions to ask, feel free to post them on the Forum – we always have Experts on the HP Support Forum to help you out.
    Do you have questions setting up or using your printer, notebook or desktop PC?
    We have answers.
    Experts will be on the printer and all in ones, notebook, and desktop boards ready to answer your questions from Tuesday, April 26th 9:00am to Wednesday, April 27th 9:00am Pacific Daylight Time.
    How the day works:
    Come to the Forum and post your questions. More than 100 experts will be on the Forums and will do their best to answer your questions. They may need to get some more information from you so please check the box "email me when someone replies."  An online conversation will be born!
    Why should you come to the Forums?
    Whether you own a Photosmart printer, HP Envy notebook or an HP home desktop computer, there has never been a better chance to learn about your product.
    When do you have a chance to talk directly with the people who designed the product or wrote the manual for it?
    This will be your chance to connect with the best and brightest minds at HP for free.
    We’ll share our knowledge on the best ways to:
    Troubleshoot the issue you are having;
    Set up a Wireless network;
    Tweak your product to increase performance;
    Safeguard your PC from viruses and spyware;
    Choose the right video card, power supply, or add the right amount of memory;
    Use the tools built into your product that can make it run better and fix common problem;
    Also, get your questions answered about all new Internet Explorer 9, tips, and compatibility.
    And it’s FREE.
    Doesn’t matter how old the product is or what it is connected to. We will do our best to help.
    The event will also be occurring on the Enterprise Business Forum (April 26th from 9:00am to April 27th 9:00am PDT) and Simplified Chinese Forum (April 28th - China Standard Time).
    Hope to see you on April 26th! 
    I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

    Hi bkspero,
    Thank you for the feedback.  To address your concerns, your posts made during the Expert event can be found here:
    Add ATSC channels to existing QAM lineup in Windows 7 Media Center
    Delete Vista recovery partition after Win 7 upgrade
    They were moved to the appropriate post-event forum and left open for responses.  If you still need assistance with these issues, you may want to reply to your posts and let everyone know you're still looking for answers.  This reply will serve to "bump" your threads back to the top of the first page of the forums as well.
    Clicking the "Kudos star" to the left is a great way to say thanks!
    When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
    Rules of Participation

Maybe you are looking for