Question for anyone using WebEdit

We recently have turned on this feature and are seeing sporadic problems where the application opens however the document fails to display. In its place we are presented with a garbled version of our portal login screen - as though there were a gateway/security type of issue.
A PTSPY recently revealed that the user didn't have appropriate permission to a 202 object. After guessing which class that would be it seems most likely that this is either our Collab Remote Server or our Collab Crawler. Both of these are set with the everyone group to have READ access.
If you use Collab's WebEdit could you check your security on both of these objects and see if you have it raised to SELECT for your everyone group. I can't fathom that it would be needed to be set any higher than that. Or if you have any other guidance I'd be thrilled to hear it!

Geoffgarcia,
In our installation the Collaboration Remote Server and Collab Crawler the Everyone group has select permissions on them. However I suspect the issue isn't with either of these objects, but the Checked In Property. It is object 202. Check to see if it is set to select. Hope it helps!
Jonathan

Similar Messages

Question for Anyone Using CS4 Production Premium with Windows 7

I'm testing Windows 7 at home with CS3 Production Premium and have not had any issues. Of course CS4 is quite a bit different.
Anyone using CS4 Production Premium on Windows 7 regularly? Any issues to report?
Thanks

Thanks for replying to my post:
mark_m wrote:
"I notice that when I open an old CS4 project and PPro asks you to locate the file, that the "show only exact file name" tick box seems to have no effect.
This is on Windows 7 RC 64bit."
On our systems at work that have XP and Vista + CS4 Production Premium. I've noticed this with preview files in particular and possibly some others, I don't remember. The "show only exact file" checkbox is greyed out. This is somewhat annoying because projects can have a huge number of preview files with long cryptic names making it a pain to locate the correct one manually to get the ball rolling. If I don't think it'll take too long to re-render, I just select "skip preview files".
We bought 3 licenses for Windows 7 and I'm encouraged by the performance, reliability and features on my home test system (RC 64) that has CS3 installed. Can't wait to get rid of XP and Vista.

Questions for anyone using this forum

is this forum only for people who have problems with apple stuff to go and complain so that we feel better, because i've posted numerous questions on this and other forums, non have gotten replies. i really feel as though this is only a place where people can go to vent some frustration with things. i'm not even sure if there's a guy (or team,which there should be,) out there just looking at these questions and trying as best as they can. now i understand if its only a group of like ten gpeople there to help us because there has got to be at least a million people, if not more, out here sing mac products and experienceing problems. i just want to know if its really that hard to get a little responce about things. we have problems, we come here for answers because thats where apple tells us the answers are.
now my latest question may not be able to be answered by an apple tech, but, where is the best place to hock an iPod for $$$. mine is dead and will not come back to life. i want to get another iPod but its not in my budget unless i can sell my current dead iPod to put a down payment on a new one. so if theres anyone out there with an answer, please respond, otherwise its like talking to a wall.
Windows XP Pro 20 gb iPod photo

No, this is definately not a place just to complain so you can feel better. These are user-to-user support forums. Nobody here works for Apple (other than an occasional moderator). We're just users like you who enjoy helping others.
I haven't seen your other posts, but usually if a post goes a while without a response, it's because the post either doesn't provide enough information, or is just a rant and doesn't ask a specific question. Post a detailed description of your problem without ranting about it and you will be very likely to receive help.
If your iPod is dead, you can either sell it on ebay or somewhere (people will buy non-functioning iPods), or take it to an Apple store and give it to them and receive 10% off a new iPod.
Cheers!
-Bryan

Question for anyone using Modul8 2.5.8 with QuickTime 7.6?

Like the title says, please answer only if you're using Modul8 with the new version of QuickTime. There is no place for speculation, no matter how well informed, in this thread.
I've got a gig on Saturday night and I don't want to risk any degradation in performance necessitating an "archive and install" between now and then. On the other hand, if the improved Motion JPEG performance mentioned in the release notes is reflected in Modul8, then I'm all over it!

There is room for speculation, since others who might read this could benefit from it.
If you're in dire need of the system to work during your gig, and it's working now, then dont update to 7.6 until after the event this weekend. This goes for any update, and not just quicktime.

'Genius' related question for anyone with over 1.2TB of music?

Anyone out there with a iTunes library with over 1.2TB of music?
Reason I ask, is that I've not been able to solve a problem in updating Genuis - I'm getting the error - 'Genius results can't be updated right now. There is not enough memory available ~ Please try again later.' or the 'unknown 4002 error'. The steps I've taken to try and correct sometime back can be found in https://discussions.apple.com/message/12584815#12584815 and also shown here in sequence below.
I keep thinking this will be fixed with the next version iTunes but so far with the latest, things still the same. So looking to see if anyone with a similar size library is having similar problems and it just a limitation of the program or it's something specific on my end that I can fix.
Appreciate...
Up to this weekend I've had not issues with Genius. Worked beautifully and updated last Sunday as I have been doing every week since Apple added Genius. Yesterday I added a few albums and went to update and now getting the error of 'Genius results can't be updated right now. There is not enough memory available ~ Please try again later.' Now my library is well over >200,000 songs and only added 6 albums this time. Music sits on a external 2TB drive ~100GB free and my MacBook Pro has over 60GB open. Running latest Mac OSX and latest iTunes. Nothing new installed or changed since last Genius update.
To the points raised in this thread.
1. I've been updated weekly with a Library with over 200K songs till now with no problem. Majority is what I've ripped from my albums & CDs.
2. Deleted the albums recently added since last successful update - same result.
3. Connected directly to the network bypassing router as suggested here - same result.
4. Reinstalled iTunes program - same result.
5. Repaired permissions - same result.
Problem remains. Welcome any additional thoughts.
Question for anyone with a music library
https://discussions.apple.com/message/12584815#12584815
Ok, tried all the suggestions here yet the problem remains.
In addition what I posted above -
1) Dumped the cookies in user/library/cookies folder
2) Deleted the apple cookies found under Safari Preferences "Show Cookies"
3) Repaired disk permissions
4) Deleted iTunes Library Genius.itdb file
5) Reinstalled iTunes (with the new 10.1 version)
6) Restarted computer
7) Rebuilt iTunes Library folder http://support.apple.com/kb/ht1451
8) Deleted all iTunes dead tracks
http://dougscripts.com/itunes/scripts/ss.php?sp=removedeadsuper
9) Increased internet access speed
10) Removed all open "[" and '}' brackets from songs, albums & artists
10) Rebuilt my entire library from scratch!
Is there anyone out there with over 200K songs that can update their Genius? One thing I noted is the genuis.itdb file is just over 2GB. I'm wondering if there is a maximum size on this based on the error I'm getting. Any thought or know info on this?
Ok, think I may have found something here with this. I backed out all the music added prior to this problem occurring and ran the Genius update. All worked fine. I then started adding the music back little by little (running the update each time) until the problem returned. When the problem came back I ruled out the specific music added by backing that bit out, verified all was ok and added a different batch back in.
Bottom-line it appears that when my library exceeds exactly 1.208TB the problem appears. Interestingly enough it does not appear to be related to the number of songs, the size of the genius.itdb file (in fact when it was working the file was at 2.25GB - larger than what I reported before). It specifically seems to be related to the size of the overall library - when I have it for example at 1.2079 all is ok, 1.2081 it fails with this error.
I did try moving the library and related files to the external drive but same result. abavetta, I think your suggestion of this script may be a workaround for now - although from what I read, is this not the same that you can do anyway with iTunes by holding the alt/option key open start up? In fact I do have two libraries now - one with the 2TB drive which I use at home and another for 2x500GB disks I carry with me when i travel. I just reported the same back to Apple but doubt if any immediate solution will come for this. Too bad as one of the great things about having such a large library is the mixes you can generate via Genius. Anyway, such is life and will just live with this for now. I also just found this program called Tangerine! http://www.potionfactory.com/tangerine/ which creates playlists like Genius - although through a different technique I might also take a look at.

Just to let all know that may be having a similar problem, what I found by accident to fix this problem.
Reset all my Home Folder permissions using the resetpassword method from the startup utility in Lion. Then turned off/on to reset Genius and cleaned out the cache folder for good measure. Finally after more than a year without, have Genius up and running again.

Question for folks using 7200 rpm drives

Hi, for anyone here using a 7200 RPM drive in their macbook, can you post your experience regarding vibration felt on the palmrest and also what brand drive you have.
I just installed a WD Scorpio Black (320GB 7200) and it produces enough vibration on the palmrest to be annoying. The stock Fujitsu produces absolutely none. I am going to return the WD and either get a different brand, or get a 5400 RPM.
Thanks for any feedback.

Hitachi Travelstar 7K200 200GB. I've had it since last January. Never a noticeable vibration, although the sound of the bearings/platters spinning seems to have increased recently. I don't find that unusual since that's typical for any hard drive.
The hard drives don't typically produce noticeable vibration unless they're loose. Have you checked to see that it's secure in the drive bay? I've heard that sometimes the little shock-absorbing "bumpers rails" in there can get dislodged in the installation process.

Question for anyone who uses temperature monitor

i think my temperature monitor is broken..i had it on my last macbook and it worked fine..but this one says my computer is constantly at 21*Celcius...and i've tried uninstalling it and reinstalling it..what is the best temperature monitor?

None of these these temperature monitors are going to work right with the current Intel Duo Core chips. It's an Intel processor design fault. I got this info from the Hardware Monitor developer.
Q: I have a Mac with an Intel Core Solo or Core Duo processor.
Sometimes, the temperature readings seems to "hang" and are no longer
being refreshed. Is this a problem with the application?
A: No, this problem is caused by an internal design flaw of current
versions of Intel Core processors. The Digital Thermal Sensors may
stop working when the processor returns from a C3/C4 power saving
state. Intel plans to correct this hardware bug for future steppings
of the CPU.
Intel refers to this hardware problem as Erratum AE18. For detailed
information, please see Intel document 30922204
http://www.intel.com/design/mobile/specupdt/309222.htm
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 

OWB general questions for effective use.

Hi all,
I have been using OWB for a while now, and am getting to the point where I want to make sure I am using it effectively.
For example, how does one decide what to include in one project, or to split it up into multiple projects? I am loading a warehouse, and so far I am only loading raw data into tables.
My next step will be to perform ETL on the raw data and start forming more structured warehouse data. Would that step be better contained in a separate project? Would I need to repeat the definitions of the tables in the loading project? Should I just keep the whole thing in one project? The loading project is quite large, as we have raw data from many sources, and it seems to get one file in takes about 5 - 7 OWB objects (flat file, ext table, 2 - 3 mappings, process flow, 1 - 2 tables.)
So I have dozens of mappings, tables, etc.
Even though much of the data comes from different places, it is generally used together by the end users, and the ETL will likely also need to use most of it together.
Is there any "Best Practices" posted anywhere?
Another question that has come up is this: It seems the idea is to create the warehouse structures completely in OWB and deploy to the DB. However OWB doesn't allow for a full table definition, for things like Triggers, or for advanced features due to a later DB version.
So does one just create a "phantom" entry in OWB that is never deployed, and then create the actual table manually, or deploy and then modify manually to add the trigger?
Or are we not supposed to be using DB triggers, and instead control everything through OWB?
Any insight would be appreciated.
Thanks

Hi
I think the kind of questions you are asking are more aimed at methodology's not so much OWB. There are plenty of sites you can get this kind of info from one but not necessarily the best being <http://www.ittoolbox.com/>
In any case we use three projects and multiple schemas
project & schema 1 is used to collect data quickly from multiple sources
project & schema 2 normalizes the data (acts as the storage repository)
project & schema 3 is where the datamarts exist (de-normalized data)
this approach allows you to isolate your integration layer from your reporting layer. most changes only affect one of the layers, not all.
as far as creating your structures in owb is concerned I seen no problem, provided you are using a good ER tool and have ironed out any potential problems.
I have certainly created triggers manually and added them after deployment, but in most cases you can use Transformations, post-mapping, and pre-mapping processes to do the same thing, after all the data should only get into the target through a mapping. If it gets in any other way, you have a hole in you bucket.
Chris

A CR remote ODBC connection question for anyone brave enough to jump in.

Greetings.
Been working with CR 2008 for about a month now, having great success. Two days ago it all went south as I hit a brick wall. Yep, I'm a relative newbie to CR, but I've been doing IT for many years. This has really got me stumped. Any takers?
My testbed:
I have a segregated network with two PCu2019s (A and B). PC (A) is running XP-Pro (32-bit) at IP 192.168.1.104, while PC (B) is running Win 7-pro 64-bit at IP 192.168.1.100.
I installed CR 2008, Oracle 10g Express and MySQL Server 5.5 on both, so they are both configured identically from a database/server perspective. Both use Norton Internet Security 2011.
Oracle EX came with a sample HR database. I added a normalized Innodb compliant northwind database to the SQL Server and verified both installations.
Both CR programs on PC(A) and on PC(B) can connect without issue to their respective local databases. The HR database has been successfully (locally) accessed by CR. The Oracle northwind database has also been successfully accessed (locally) by CR.
The problem:
When running CR on PC(A), I cannot find a way to successfully connect it (i.e., CR) via ODBC to the other databases on PC(B) - or visa versa.
I have eliminated the obvious possibilities like firewalls or improper port addressing. Strangely, I can create DSNs on PC(A) that tells me it successfully connects to the target DB on PC(B), but for whatever reason I cannot get CR on the same machine to successfully use the same DSN that just successfully connected without CR. ARRRggggggg!
For example:
Step 1:
I set up a System DSN as follows on PC(A) in my attempt to connect to the target HR database on PC(B):
System DSN: HR-Fastsob
Driver: CR Oracle Wire Protocol ODBC Driver 5.3
Standard connection, Host: 192.168.1.100
Port: 1521
Service name: XE
Step 2:
I click on the Test Connect in the u2018ODBC Oracle Wire Protocol Driver Setupu2019 window.
It responds with a u2018Logon to Oracle Wire Protocolu2019 window, in which I am prompted to enter the User Name and password. On the Oracle Express setup, I configured the database instance with root access as User: u2018SYSTEMu2019 and Password: u2018Passwordu2019, so I figured these should be the correct credentials.
I click the u2018Test Connectionu2019 connection button and breathe a sigh of relief as it tells me Iu2019ve u2018successfully connectedu2019.
Step 3:
3.1 - I launch CR
3.2 u2013 I create a new blank form
3.3 u2013 I create a new connection
3.4 - I click on ODBC (RDO)
3.5 - I select the HR-Fastsob DSN from the list of DSNs.
3.6 - Click next
3.7 - An ODBC (RDO) connection window appears. Iu2019m prompted to enter the user ID and password (SYSTEM and Password respectively), then hit the u2018Finishu2019 button.
3.8 - A u201CLogon Failedu201D pop-up appears. I hit the u2018OKu2019 button.
3.9 - Another popup appears saying u201CDatabase Connector Error: u201808s01:[Crystal Reports][ODBC Oracle Wire Protocol driver]Connection refused. Verify Host Name and Port Number. [Database Vendor Code -1]u201D. I sigh, then hit the u2018OKu2019 button.
3.10 u2013 Yet another window appears saying u201CLogon filed. Details: 08001:[Crystal Reports][ODBC Oracle Wire Protocol driver][Oracle]ORA-12203: unable to connect to destination [Database Vendor Code -1]. I hit the u2018OKu2019 button.
3.11 - An ODBC (RDO) connection window appears with my earlier entries (from step 3.7). No matter what I enter, the results are the same.
Two days later, Iu2019m still scratching my head.
I'm really hoping there's a guru in here that can feel my pain and who can dumb down the solution to this perplexing problem I'm facing.
Iu2019m really at a loss. Obviously, I donu2019t fully understand ODBC connectivity well enough.
The next beeru2019s on me if you get this one.
Thanks to anyone willing to help me out

Hi Don....
Thanks for jumping in -- much appreciated.
Your suggestion seemed plausible, as I had alternated between the system32 (64-bit) and the sysWOW (32-bit) odbc drivers. I thought maybe I had mixed it up...but alas, that didn't turn out to be the source of my problem. Your suggestion is still valid though, had I been using the 64-bit ODBC driber with a 32-bit CR app.
I decide to try another approach -- by eliminating CR from the equation altogether. I ran Microsoft excel against the same remote databases using the same DSN and voila.... all worked as I thought it should in the first place. My connection was extremely fast and rock solid.
This would ( I believe) suggest that the issue is with my version of CR i.e., Developer edition (v12.3.0.601) running on Win 7.
I tried running CR in compatibility mode XP-Pro SP2, but got the same errors. So now I have to decider whether or not to upgrade to CR 2010 in the hopes it will work on Win 7 Pro 64-bit.
Thanks again for stepping up.
warm regards
Bob

Good information for anyone using Flash Catalyst CS5 !!!

I am using FC_CS5 and I am a huge fan and can not wait for the next version to come out. I have already maxed out the potential of this program and I have noticed many other people having the same problem that I had when it comes to not being able to create any more than 20 different states or 20 different pages.
The way around this is simply to design your project within AI CS5, Fireworks CS5, Photoshop CS5. I started my project out in Illustrator CS5 simply because Flash catalyst will recognize your layers and your individual artboards and will lay them out for you in your Catalyst project. This is the great part!!!
You can't create new or duplicate anything over 20 states from within Catalyst but you can create a large amount of artboards or in catalyst terms, "states", thus allowing you to get by the restriction within catalyst.
My project has about 45 different artboards. I created a few extra artboards incase the client wanted to add some stuff later on. I create a catalyst project from my AI project and now I have 45 different states.
I hope this will help anyone who is using Flash Catalyst and I can't wait for the adobe crew to fix this issue allow for more than 20 states in the future and I better not find out that the adobe crew stops the "work around" I described above!

OH man it's precious.
Do you have any insight into my imported swf problem?
I have just now updated dw and fc and redone the process (heard imported swfs was easier on the beta version) don't know why I can't manage my assets, or what I did wrong in one instance, but correctly in the other. (see the animation on the LW corner).
The help files really need to be developed in this area, I guess..
two versions, testing server correct: www.cachetrade.com
Not running swf (with rollover of the yogi on the left): www.desertypalmyoga.com
Is this a hijack or a top-post?
I really just want to understand the issues so I can plan workflow: really quite powerful, that's why this first design in most b+w (though curious how the color overlays and modes will work... )
THANKS!

Calendar / Timezone question for anyone in Arizona

I was just looking at my calendar for next week and noticed that all items are 1 hour earlier than they should be. My first thought was that the timezone was set incorrectly (Arizona doesn't observe DST). In fact when I went to Settings -> General -> Date & Time with Set Automatically On it shows me in Cupertino. If I turn Set Automatically Off and type in Phoenix for the Timezone next weeks calendar is correct.
Not sure what else I should do to get the phone to automatically put me in the right timezone. I've made sure Setting Time Zone is on under location services. Went outside to make sure I had a good GPS signal while toggling Set Automatically On and Off.
Anyone in AZ or any other place that doesn't observe DST seeing similar issues?

Hey Dark,
Follow Allan's advice. You might just find an "Easy Out" that will fit perfectly. Otherwise you'll have to drill it out a bit to get a grip. There is a liquid that had carborundum grit in it that I've used with success.
One heads up, that power button lead is really tiny and can be easily ripped out. You have to detach it before the outer case is more than 5" or so off.
Richard

Dreamweaver CC mac is STILL unusably slow. I question if anyone using Dreamweaver CC mac successfully?

My setup is 3.4GH i7 iMac w24GB Ram and Fusion-SSD disk, running 10.8 (Mountain Lion), and Dreamweaver CC is still unusable. And from what I read on this site, many others have given up and gone back to CS6, like I have.
Very frustrating to lose days trying this or that to speed Dreamweaver up. It appears this is just now a bloated Pig that checks for too many things and have timeout issues somewhere.
I now question if Adobe has ANY users successfully using this program?

A lot of people are using CC successfully. Everyone's system is different. Slowness can be caused by various things including but not limited to:
network drives,
backup software,
anti-virus software,
GA Tracking code,
null protocol links // to scripts on 3rd party servers like Typekit.
Google Ads,
CSS @import,
code validation errors
If none of the above are relevant, try Deleting Corrupted Cache in DW
http://forums.adobe.com/thread/494811
If that doesn't help, try Restore Preferences
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If all else fails, use the CC Cleaner Tools below followed by a software re-install.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Also ensure that you have Java SE 6 runtime. Yosemite ships with 8 but that won't help you with DW.
Java SE 6 Direct download:
http://support.apple.com/kb/DL1572
Nancy O.

I have a question for anyone that can help me with ACER mini laptop!!

I am thinking of buying this laptop, i really just need it for internet, storing photos, and simple tasks...I dont really need a whole lot of bells and whistles. I would like to be able to watch movies on it when i'm traveling, and i'm assuming i would have to buy a attachable DVD drive for it correct? If anyone has this computer, or knows anything about it I would appreciate a response before I decide to buy it
Thank you in advance.

I have a 9" Aspire One and love it, although I wish I'd known about the 10" one coming out, it's less than what I paid for my 9" in December! (I also have a fullsized laptop for gaming and such, but many times I just bring the tiny AAO along - superportable and great battery life)
As previously mentioned, you can't legally save DVDs to the hard drive of a computer to watch on a plane (or whatever) even if you own the DVD. No real technical barriers, but it is not legal.
I do routinely take TV recordings from my MythTV (Computer-based PVR, kind of like TiVo on steroids) system and recompress them with Handbrake (http://handbrake.fr/) for my Aspire One. Recompressing broadcast TV recordings is legal.
FYI - The netbooks Best Buy sells are usually the same price as from other sources but frequently include a smaller 3-cell battery instead of a 6-cell battery, a fact which is not mentioned on Best Buy's online ordering systems, or at least wasn't a few weeks ago.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Question for BasicComboBoxEditor use in JComboBox How can I get right ce

I use a JComboBox as the editor for JTable.Now I met a problem In use object that BasicComboBoxEditor as the editor for JComboBox that in JTable.
I can't get the cell data rightly.I can't get the editing row and column when system call getEditorComponent() . Mouse event process is after getEditorComponent().
How can I get right cell data when then getEditorComponent calling?

Sorry,I am english is poor.
I use a component of JComboBox as editor of JTable. then
I want to konw that how can I get right data in a cell of JTable when table enter editing

Question for people using Sitraka's PerformaSure

Anyone out there using this product on Weblogic?
If so, what kind of load do you typically see it introduce in your system?
What do you think overall?
Thanks,
Kent

To be more accurate, the dock shows when applications are running with a little spotlight/blue dot (as of Leopard).
You can also use Expose' to force all the application windows to show up temporarily (if they're not minimized).
In general, you find that there are more UI shortcuts in OSX than there are in XP/Vista. And there's just as many keyboard shortcuts they're just different (very different in some cases).

Question for anyone using WebEdit

Similar Messages

Maybe you are looking for