Question for checking local key-in time

Hi,
I would like to ask one simple question for checking actual key-in time.
Our SAP server located in Europe(CET). The creation date of our orders are based on CET. It is correct. Now I intend to check local time for entering sales order in SAP, for example, our company code is KR01 which located in Korea. Does SAP provide the functionality to check when the order created in local time?
Many Thanks
Aries

Hi Aries,
most applications (like sales order processing) does not provide the option to convert the creation date /time into a local time zone. So your users in Korea have no easy possibility get the date / time displayed in their time zone, even if they have the Korean time zone as user time zone.
Best regards, Ulrich

Similar Messages

Adobe photoshop cs5 extended always asks me for a serial key every time i open it.pls help

pls help

yes it is accepted when i type it and i can use it until next time i open it when it asks for the serial key again.this keeps on repeating.OS=WINDOWS 8 64bit.
system=dell inspiron 15r 5521 i5 intel processor 1.80ghz 4gb ram.

Why does aperture keep asking for my activation key each time I open the programme?

I have aperture on iMac and macbook air - everytime I open aperture on air, it asks my name and key number. how do I get it to remember this? why does it do it?
Help please - I am tired of it.

Be sure to enter the serial number, when you are logged in from an account with Administrator priveleges - otherwise the serial number cannot be stored.
Aperture is installed for all users on your mac, so the serial number is written to the system library, not the user library, and this requires read/write access for administrators. Do you enter your serial number using an administrator account?
When did this start? Have you migrated your system from another mac? Then you still may have an older ProAppSystemID file or Aperture cannot write to the System Library.
To stop Aperture asking for the serial number, first check, if you still have an old file "ProAppSystemID" in your System Library.
Quit Aperture.
Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
Reenter your serial number, hopefully for the last time.
Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
Use the Finder's "Go" menu
Go > Got to folder and enter /tmp into the textfield. If you see the file there, move it to its proper location.
Aperture must be running, and you will have to wait a few minutes to be seeing the file appearin the /tmp directory.
In this case you may want to repair the permissions on your system drive; you can do this using the "First Aid" tools in "Disk Utility" (located in Applications > Utilities)
Regards
Léonie

Question for Printing - Local Administrators can See all printers but ordinary users and additional administrators cannot

Hello, this is urgent. This is the setting, Using Citrixx XenApp, branch users will print into the head office. The built-in admin can see all printer sessions in head office and branch but ordinary users and additional administrators cannot.
Even though, I'll put the users in the group Administrators,still, they cannot see all the printers, they can just see their own. But, I need to see ALL.
Please help me. Thanks.

Hi Lei Mab,
Please understand that this forum is used for the discussion about issues related Windows 7 operating system usage, any 3rd-party software usage issue would not be supported here.
The curent situation is when you are using Citrixx XenApp for the printing task, please seek help at their official website support forum.
Meanwhile, if we are in a domain environment, please take a look at the group policies settings, which might be the cause of the issue you encountered.
Besides, take a look at the following path:
Control Panel\Hardware and Sound\Devices and Printers
See if the printers would be listed there.
Best regards
Michael Shao
TechNet Community Support

Need to enter WPA key every time i re-connect?

I have a small network of one wired PC, one wireless PC and a wireless laptop. I messed something up while trying to add our new itouch to the network and now, the laptop is asking for the WPA key every time it re-connects. As of right now, the wired PC is also the only one getting on the internet. We are using the WRT54G v.4, running windows XP on all three computers and i'm about to throw them all out the window. Please help. By the way, the laptop has a different IP address then the other computers...is this a problem too? Thanks in advance.

All the computers on your network should have different IP addresses, but they should all be on the same subnet 192.168.1.x . If your computer fails to connect, it may show a 169.254.xxx.xxx address. This address simply means you failed to connect. It comes from Windows, not the router.
First, in the router, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Also, in the non-working computers, temporarily turn off the software firewall, including Windows Firewall, and see if that helps you make a connection.
To fix the recurrent WPA key entry problem:
In the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. Delete your current network (this will clear any old settings). Reboot computer. Return to "Preferred Networks" and re-enter your current network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. Your computer should connect automatically to your router. If you still have trouble, make sure your computer's software firewall is off.
If the above does not fix your problem, download and install the latest driver for your wireless card.
Also, please note that WPA = "WPA with TKIP", and WPA2 = "WPA with AES".
If you are using WPA2, then note that Windows XP requires a patch to run WPA2. Go to Microsoft Knowledge base, article ID=917021 and it will direct you to the patch.
Sadly, the patch is not part of the automatic Windows XP updates, so lots of people are missing the patch.
If you need more help, please state the computer software firewall that you are using.

LR5 KEEPS asking me for the license key

I have installed Lightroom 5 on my Mac (OS X 10.9.5). I have installed both via disk and via download. It says installation is complete. When I go to open LR5 it asks me for the license key and says that license key is good. Problem is that it asks me for the license key EVERY time I open LR5 and after I enter it and hit finish it closes LR5. I cannot get past this. I have un-installed, restarted my computer and re-installed about a dozen times with the same result. Any ideas?

reset your preferences -
acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall
or see if this works for you, Lightroom: Asking for serial number each time it's launched

Message no.8Z876 No time base defined for the revaluation key -Problem ABAW

Hello,
I have a problem... I have a revaluation area (04: in local currency) and a parallel revaluation area (05: in hard currency) and I have to revaluate an asset, but I couldn't with Tx ABAW. The error is :
Message no. 8Z876 No time base defined for the revaluation key
I checked the configuration and I think it's all ok. I did some tests and I could revaluate only the Area 04 (local currency). Example:
Area 04: 500000 PEN
Area 05: 0 USD.
But this is a big problem for example when I make a transfer the asset to other because the revaluation Area doesn't transfer.
Can anybody please tell me how resolve this?
Regards,
Fernando
PD: I'm so sorry for my grammatical errors, I'm spanish speaker

Hi
The error
message 8Z 876 can be shown for two basic things:
1. TBE (Time Base exposure variant) is not maintained.
   Please check if any time base is maintained for the revaluation key.
And if it have all the intervals correctly defined and the post flag
marked for the months required to calculate revalaution.
   If it is maintained please check if the last revaluation date is
filled in your revaluation areas. If the last revaluation date field is
blank, the time base must have the following entry: 31.12.XXXX-1 where
XXXX is the current fiscal year (for ABAW).
2. In the ABAW transaction itself you are trying to post values to any
of the parallel areas defined in the chart of depreciation.
   In transaction ABAW (or AB01) do not post any amount to parallel
areas. The posted values should be equal to zero.
   The values in hard currency will never be revaluated by the inflation
program. If this is the case, please enter manually only zero values as
"Amount posted" in those parallel areas.
If by some specific reasons you still plan to post (manually) to these
parallel areas, you will get error message 8z876 in accordance to your
explanation of the problem.
   To allow posting of non-zero amounts to these areas, you need to
create Revaluation Key NULO. To do this, go to the customizing system
IMG (transaction SPRO) according to the link:
IMG -> Financial Accounting -> Asset Accounting -> Special Valuation ->
        Revaluation of Fixed Assets -> Revaluation for the Balance Sheet
        -> Inflation -> Maintain Revaluation Keys
Create new entry (click F5) for key with name NULO, And save data
(Ctrl+S).
Please, adjust your customizing in accordance with the instructions
above.
Best Regards,
Blaz

TS1368 My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful.

Can somebody give some real time questions for alv report

hi guru
can somebody give some real time questions for alv report.
answers also.
regards
subhasis.

hi,
The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports, saving time which might otherwise have been spent on report enhancement
The common features of report are column    alignment, sorting, filtering, subtotals, totals etc. <b>To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).</b>
Using ALV, we can have three types of reports:
   1. Simple Report
   2. Block Report
   3. Hierarchical Sequential Report
<b>Reward useful points</b>
Siva

My iMessage for my Macbook Air is not working. It says no delivered with a red ! next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time. I have done about everythin

My iMessage for my Macbook Air is not working. I have updated everything. My system is running on OS X Yosemite Version 10.10. When I go to send a message, it says no delivered with a next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time and updating FlashPlayer. I have done about everything I can think of. Any help would be greatly appreciate!

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

How to stop Firefox from checking for add-on compatibility every time it opens?

How to stop Firefox from checking for add-on compatibility every time it opens?

That can be a problem with the compatibility.ini file in the Firefox profile folder.
Try to rename (or delete) the compatibility.ini file in the Firefox profile folder to see if that helps.
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
You can also check for problems with preferences.
Delete possible user.js and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences

Checking for duplicate primary keys on row inserts

Checking for duplicate primary keys on row inserts
I have a situation where I will be making bulk table inserts knowing that the primary key value will in some cases already exist. In this is the case I simply want to ignore the duplicate inserts.
Should I be performing a sub-query on the table and using a statement like:
where not exist in
Or is there a cleaner way of discarding or checking for duplicates on insert.
My concerns were mainly one of performance, as my routine will be inserting a few thousand rows in its operation.

The MERGE commnad is a good option when a large percentage of the data will exist in the target because it is much more efficient to attempt to update then insert when the update affects zero rows than capture an error and convert it to an update.
However, since in this case it would appear that only a few rows will alreadys exist and we want to ignore the duplicates when they exist then
begin
insert
exception
when dup_value_in_index then null;
end
would be the way to code this one. The bulk insert version has in 9.2 the ability to store the errors so that they can all be handled at once which means the rest of the array insert can work.
HTH -- Mark D Powell --

.PST settings for .CSM Entry point locale key field

We have been instructed by the USPS to populate the .CSM Entry Point Postal Code with the ZIP+4 of the BMEU, which is 48233-9997. The .CSM Entry Point Locale Key field should be populated with the Locale Key of the BMEU, which is Y11740.
What and where is the PST settings that may affect these changes?
For entry point zip code, I updated "Origin Post Office ZIP Code (10 chars)=".
For entry point locale key, I updated "Entry Point Drop Site Key (to 9 chars)=".
The CSM shows the updated zip code in positions 59-67. However, in the locale key, positions 50-58, I see "ORIGIN". If I search the .PST file, I find no setting with ORIGIN.

Paul,
Can you please tell us what is your Entry Point Type and Origin Post Office ZIP code?
Thanks

When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

When I use update software from my mobile it take long time for checking update software and no thing happened to update my IOS software

Servers have been swamped. Keep trying and be patient. Wait a few days.

HT5312 I have forgotten the answers to my apple security questions. I have tried several times but just cant get through and I need to make a purchase for the first time

I have forgotten the answers to my apple security questions. I have tried several times but just cant get through and I need to make a purchase for the first time

I am having the same problem. I know my apple ID and password but do not remember my security questions. How do you go about changing the security questions? Please help.
Thanks.

Question for checking local key-in time

Similar Messages

Maybe you are looking for