Question for "Hyper-V replica" and "replica server"

On the replica server, is it possible to have and operate other VMs, that are not replicas to existing VMs ?

Hello DimiterS,
Yes, sure you can run VM workloads on both Hyper-V hosts which are participating in Hyper-V Replica and vice versa.
For example, you can have DC01 on HV01 and DC02 on HV02 and then replicate DC01 to HV02 and DC02 to HV01.
No, you cannot have replication from Hyper-V 2012 to Hyper-V 2012 R2, you need to maintain the same Windows Server version on the physical host.
One advise, I would strongly recommend you to exclude the Paging File disk from replication, you can change the location of the System Page File inside the Guest OS to another disk/volume and then exclude it during the replication wizard, this will help
to reduce the replicated traffic and I/O since the paging files are constantly changing. More information
here.
Hope this help.
Regards,
Charbel Nemnom
MCSA, MCSE, MCS, MCITP
Blog: www.charbelnemnom.com
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark
as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

Error Message when installing Companion CD for HTMLDB 1.6 and HTTP Server

Hi. First time forum user so bear with me.
I'm not sure if this is the correct forum for this but the assistance of anyone who may be able to shed some light on the problem whould be greatly appreciated. I am having a problem when attempting to install the Companion CD for HTMLDB 1.6 and HTTP Server, details given below:
The following Oracle components have been successfully installed
     Oracle 10gR2 Database.
     Oracle 10gR2 Database patch 10.2.03.
     Critical patch up date (security).
The following Oracle component failed to install.
     Companion CD for HTMLDB 1.6 and HTTP server
Scenario leading up to failure
     Extracted companion CD installation files to D:\oracle\utilities\Oracle_10_2_0_Companion
     Executed D:\oracle\utilities\Oracle_10_2_0_Companion\companion\setup.exe.
The following error message is displayed in a "JAVA VIRTUAL MACHINE LAUNCHER" dialog box
     "Could not find the main event class. Program will exit."
I have been attmepting to resolve this problem for over a week and have already checked the following with no resolution to the problem:
Cause. This issue may have to do with two issues (and may occur more on Windows):-
1. Within the ORACLE_HOME directory full pathname there is a space.
2. The directory from where the software / patch is being installed has a space within the directory full
pathname (where the file for the installation by default is named products.jar or products.xml).
Solution. To implement the solution, please execute the following steps:-
1. Rename the full pathname directory NOT to contain a space.
2. Launch again the OUI... and verify if the problem occurs.
Any further guidance would be greatly appreciated.
Edited by: user10386555 on 03-Oct-2008 02:51

Can you install using OUI from the RDBMS installation? IIRC, there is a problem using OUI on companion to install companion items.

I forgot my security questions for my Apple ID and I need it to buy something on iTunes.

I forgot my security questions for my Apple ID and I need it to buy something on iTunes.

http://support.apple.com/kb/HT6170?viewlocale=en_US

HT201303 I never set up any security questions for my Apple ID and I was asked on the app store to sign in and answer my security questions. I never made security questions in the first case. I can't purchase anything without them. What should I do?

I never set up any security questions for my apple ID and I was asked on the app store to sign in and answer my security questions, I never made any in the first place and it came up with questions that I didn't know. I've already been in support and tried to reset them, but I have to answer the security questions in order to change them. Is there any way to find out what they are?

From a Kappy post
The Best Alternatives for Security Questions and Rescue Mail
1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Which Laptop is good for VS 2012/2013 and SQL SERVER 2008 R2 /2012 ?

Hi,
I am planing to buy a laptop.
I am gonna be using mostly for Visual sStudio 2013 and Sql Server 2012 .
my budget is $1000.
confuse between DELL/ HP / LENOVO..!!!
please help.

This is only a personal taste of mine:
I prefer to work in Virtual Machines. In fact I did set up a VM just for my programming. This has the advantage that games and other stuff are not slowed down by SQL Server Services and similiar stuff.
This also allows me to quickly make a small virtual networks with multiple clients if I need to test some client/server stuff.
Plus I am also a bit of an adminstrator and prefer to test stuff in VM's before I try them in the real world.
I prefer using Virtual Box for Virtual Machines, so one thing of big importance was support for VT-X/AMD-V. Without them Virtual Box cannot run x64 guests even on a x64 host system.
Otherwise I wanted Windows 8 (so I could finally learn to live with it/learn programming for it's UI). And of big importance was an upgrade of gaming ability (my old one had difficulty/impossibility to run most current games).
So I bought a x64, Win8 Gaming Laptop with 8 GiB RAM (so I can run 3-6 Windows 7 hosts in paralell) and looked that the CPU supported Hardware Virtualsiation.
Otherwise pretty much every current laptop will work. x64 OS might be prefereable, as .NET has some limitations under x32/x86 OS (like the
2 GiB limit). Multicore (2 or more) is pretty much the state of the art (are there still any single core CPU's out there?).
It of course needs to be a Windows (7 or 8) to support VS. New Laptops should have UEFI (all that are sold with Windows 8 have).
If you do not need a lot of storage, using a SSD instead of a HDD will propably speed up startups (Windows, Programms) and compilation times a lot (those are disk-heavy operations) - but I only know that it should and heard of people who have them.
Let's talk about MVVM: http://social.msdn.microsoft.com/Forums/en-US/wpf/thread/b1a8bf14-4acd-4d77-9df8-bdb95b02dbe2 Please mark post as helpfull and answers respectively.

Documentation for oracle webcenter wiki and blog server 10.1.3.2.0

Hi
Can anyone tell me where I can get the documentation for oracle webcenter wiki and blog server 10.1.3.2.0. I am specifically interested in this version and not the latest version Oracle® WebCenter Wiki and Blog Server 10g Release 3 (10.1.3.4.0) because I have heard the older version provided out of the box portlets for creation of blogs.
Since we want blogs very fast, I want documentation of this older version.
Can anyone point them out to me as soon as possible please

You can find the demo portlets here: http://www.oracle.com/technology/products/webcenter/owcs_10132_demos.html#wiki_blog_disc_samples
I do not believe there were any portlets provided with the earlier release.
Anyway what i think is it should not take you more than a few hours to integrate blogging functionality if you are using the Connection & Task flows provided by WebCenter.
Venkat

I forrget my securety question for my apple iD and i need the link to reset it how can i find it

i forrget my securety question for my apple iD and i need the link to reset it how can i find it

The only thing I can suggest would be to contact AppleCare:
http://www.apple.com/support/appleid/contact/

The process could not execute 'sp_repldone/sp_replcounters' error for Log Reader Agent and SQL Server Assertion 17066 & 3624 errors in SQL Logs

One of our SQL Server started creating SQLDUMP file and and on investigation I found the error longs are filled with Errors 3624 & 17066. There is transnational replication configured on one of the databases is the LogReader Agent is failing error "The
process could not execute 'sp_repldone/sp_replcounters' on XXXXX".
Not sure if both these Assertion & Logreader Agent errors are related. Before I remove and put the replication, I wanted to check if anyone has experienced the same issues or aware of what the cause.
***********Error messages from SQL Logs******
**Dump thread - spid = 0, EC = 0x0000000111534460
Message
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to
Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Error: 3624, Severity: 20, State: 1.
SQL Server Assertion: File: <logscan.cpp>, line=2123 Failed Assertion = 'UtilDbccIsInsideDbcc () || (m_ProxyLogMgr->GetPru ()->GetStartupState () < RecoveryUnit::Recovered)'. This error may be timing-related. If the error persists after rerunning
the statement, use DBCC CHECKDB to check the database for structural integrity, or restart the server to ensure in-memory data structures are not corrupted.
Error: 17066, Severity: 16, State: 1.
External dump process return code 0x20000001.
External dump process returned no errors.
Thank you in advance.

You need to determine if this error is a transient one or a show stopper one.
It sounds like your log reader agent has crashed and can't continue.
If so your best bet is to call Microsoft CSS and open a support incident.
It also sounds like DBCC CHECKDB was running while the log reader agent crashed.
If you need to get up and running again run sp_replrestart, but then you might find that replicated commands are not picked up. You will need to run a validation to determine if you need to reinitialize the entire publication or a single article.
I have run into errors like this, but they tend to be transient, ie the log reader agent crashes, and on restart it works fine.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

I am having trouble answering my old security questions for my itunes account and it is creating a problem because I am not able to purchase apps/songs on my new IPAD. What phone number/email adress should I call to get a quick response to my issue?

I have recently bought an IPAD 2 for my girlfriend and have encountered a problem with purchasing apps through my itunes account. It is requesting that I not only enter my pasword (which I know) but answer my old account questions, which I have forgotten the answers to. It had since locked me out of changing my questions for eight hours. Is there any number I can call to prove that I am the real owner of my itunes account so my girlfriend will be able to use her ipad to purchase new apps without having to go through the trouble of using one of my other apple devices? Random information: I believe my questions were set back in 2007 when I purchased my first ipod nano, since then I have used this same itunes account for my own ipod touch and ipad 2 and my girlfriends iphone 1st generation. I have never run into a problem regarding my questions before on any of these devices

http://www.apple.com/support/itunes/contact/

Interview Questions for FI- General Ledger and Special Purpose Ledger

Hi Experts,
Can you guys provide me interview questions for
1) FI-SPL (Special Purpose Ledger)
2) FI-GL (General Ledger)
3) COPA
4) Cost Center Accounting
Help in this regard is highly appreciated. If you have any Interview Questions documents, please email it to [email protected]
Thanks
Rajanikanth.

I have some cost center qns
How is cost center realted to profit center?
What is a cost element group?
What is a cost center group?
What is the difference between Assesment & Distribution?
What is a activity type?
Award points if helpful

Question about transfer between oracle and sql server

Could i program to transfer lots of data between Oracle and SQL Server quickly?
I have tried make two connection between two databases, but it took me lots of time to transfer data.
How could I do it?
Thanks

Hi,
If you need to move data fast, then use the Oracle Migration Workbench to Generate SQL Server BCP data extraction scripts and Oracle SQL Loader files.
This is the fastest way to migrate the data.
In the Oracle Model UI tab of the Oracle Migration Workbench, right mouse click on the tables folder. there is a menu option to 'Generate SQL Loader ...' scripts. This will help you migrate your data efficiently.
Regards
John

I can't query VMs on the hyper-v replica server 2012

Hi,
using the command get-vm -> no result..
get-vm test2012
get-vm : The parameter is not valid. Hyper-V was unable to find a virtual machine with name test2012.
At line:1 char:1
+ get-vm test2012
+ ~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidArgument: (test2012:String) [Get-VM], VirtualizationInvalidArgumentExce
   ption
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.GetVMCommand
Ramy Shaker

You did not elevate your command prompt or you don't have permissions.
But the end result in those cases is usually a silent empty return.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Design question for database connection in multithreaded socket-server

Dear community,
I am programming a multithreaded socket server. The server creates a new thread for each connection.
The threads and several objects witch are instanced by each thread have to access database-connectivity. Therefore I implemented factory class which administer database connection in a pool. At this point I have a design question.
How should I access the connections from the threads? There are two options:
a) Should I implement in my server class a new method like "getDatabaseConnection" which calls the factory class and returns a pooled connection to the database? In this case each object has to know the server-object and have to call this method in order to get a database connection. That could become very complex as I have to safe a instance of the server object in each object ...
b) Should I develop a static method in my factory class so that each thread could get a database connection by calling the static method of the factory?
Thank you very much for your answer!
Kind regards,
Dak
Message was edited by:
dakger

So your suggestion is to use a static method from a
central class. But those static-methods are not realy
object oriented, are they?There's only one static method, and that's getInstance
If I use singleton pattern, I only create one
instance of the database pooling class in order to
cionfigure it (driver, access data to database and so
on). The threads use than a static method of this
class to get database connection?They use a static method to get the pool instance, getConnection is not static.
Kaj

Licensing question for AD enterprise with new SQL Server

Hi!
We have Server 2008 R2 STD where our AD is located and it has enough User CAL's. Additionally we have Terminal server with TS licenses.
Now we're purchasing a Server 2012 where we plan to install SQL Server 2012 STD where we will install our third party program and this program is going to be used through Terminal server.
Now the question is do I only need SQL CAL's or will I have to get both SQL CAL's AND User CAL's for the new server? I'm thinking AD servers User CAL's is enough for the whole enterprise, but I'm not 100% sure and need help with this!
Thanks!

Licensing questions should be directed to trained Microsoft licensing specialists instead of a technical forum.
www.microsoft.com/licensing.
That said, SQL CALs and operating system CALs are sold separately. Talk with the vendor from whom you are purchasing your licenses. They should be able to help you sort out the CAL questions.
. : | : . : | : . tim

ODBC errors for Oracle Migration Workbench and SQL Server 2000 on Windows

Hi all-
I setup a new ODBC connection for the Oracle 10g Migration Workbench to MS SQL Server 2000 on Windows XP and keep getting the following errors when I try to
either test the new ODBC connection to MS SQL Server 2000 for use with the Oracle Migration Workbench tool. Goal is to fix these errors so that I can migrate our test SQL Server 2000 databases to Oracle 10g.
Current configuration
- Oracle 10.1 Migration Workbench
- Oracle 10g Database (target)
- MS SQL Server 2000 (source database)
-Windows XP
-ODBC 3.85.1117 driver for Windows XP with SQL Server and Oracle
Errors:
I. When I test the ODBC connection:
Microsoft SQL Server ODBC Driver Version 03.85.1117
Running connectivity tests...
Attempting connection
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Specified SQL server not found.
TESTS FAILED!
Now here is what has me totally confused:
I can use the command line ISQL to access the database on the server and IP is all correct and port is available. So I can access the SQL Server database fine it is when I try to setup ODBC that it gives me problems.
Any tips how to get this ODBC working?
Thanks
Ben Prusinski

1. Jing Jin. If you had READ the post you would have seen that installing later versions is NOT an option.
2. Not supported does NOT mean does NOT work, as Balmukund pointed out in the referenced thread. The site that this databases supports is using ASP which is also NOT supported by Microsoft. As it turns out Balmukund's solution actually turns
out to be the correct solution. I installed SS2K and its Service pack 4 on the machine last night. Good answer Balmukund. as we say in the Navy, "BRAVO ZULU!!" which means "WELL DONE!!
3. Tom Li I just posted the question less than 48 hours ago. My last post was less than 24 hours ago. I think I have the right to be given the opportunity to determine whether a reply is the answer or not. I understand you don't like unanswered
posts sitting around for weeks, months or years. (I don't like it either as I have a few that are still unanswered after several years.) But you should not be showing replies as answers before I even get a chance to see them, much less try them out.
You should also not be showing replies as answers which don't address the criteria of the question. I specifically stated that I had to install SS2K. I went on to state, "And before anyone asks I need to install this version because that is what
the customer is using and I need to duplicate their databases." So the correct answer, if in fact SS2K did not work on Windows 7, would have been a virtual machine answer, as suggested on the thread Balmukund referenced. So before you mark a reply
as an answer read the question.
Edward R. Joell MCSD MCDBA

Question for "Hyper-V replica" and "replica server"

Similar Messages

Maybe you are looking for