Question for music producers ! MacBook Pro and my audio interface from Virus Ti doesn't seem to work properly after I updated 10.9.4 Mavericks

Hello
Few days ago I upgraded my Macbook Pro to 10.9.4  Mavericks And I’m using the sound card from the Virus Ti for all audio in/out and when I’m not producing music , I usually close my Logic and I use the Virus Ti as a sound card for listening to Soundcloud or iTunes on my Mac and the audio usually come out of my studio monitors , but right now even when everything is connected , the sounds from the web site is coming out from my Macbook speaker instead of my studio monitors ? and I already checked the “Output/Input” in preference and is already say Access Virus Ti and  I already repair disc too ! ,
Right now when I’m using Logic to produced with Virus sound card everything is working fine and the audio is coming out of my monitors but as soon as I turn off Logic to use Youtube or other web site, the audio automatic switch back to laptop speakers ?
If anyone had this problems with their audio interface and OS 10.9.4 , please advise !
Your help is much appreciated : )

@michelle929 don't feel so bad, i too which i never would have upgrade to ff4, OMG, so piss., worse is they deleted the old version from my computer, how dare them..lol... but most of the thing i use now don't wanna work.. i want my 3.6.15 well i think that was the last one i had.. piss piss,,and Michelle your not whining , just stating the fact's.. give me back the old version Mozilla... can't even find it on here,, any one knows where i can find it... if not gonna have to go to a server an get it,,
thanks Lotta firefox. great job, not tell us first hand what won't work....:(

Similar Messages

  • HT1848 Forgive such a basic question, it's easier than looking it up.  I have my iTunes music on macbook pro and have only synced it to one iPod.  I want to buy a new iPod and want to know will I be able to sync my music from computer to new iPod at no ch

    Forgive such a basic question, it's easier than looking it up.  I have my iTunes music on macbook pro and have only synced it to one iPod.  I want to buy a new iPod and want to know will I be able to sync my music from computer to new iPod at no charge?

    will I be able to sync my music from computer to new iPod at no charge?
    Yes, you will.

  • My Airport wireless is working for my two MacBook Pros and my daughter's iPod, but our iPad, Iphone and other iPod all say they need to set up an Airport Base Station but do not have the proper software.  I'm not sure what to do to remedy this situation.

    My Airport wireless is working for my two MacBook Pros and my daughter's iPod, but our iPad, Iphone and other iPod all say they need to set up an Airport Base Station but do not have the proper software.  I'm not sure what to do to remedy this situation.

    This might sound like a silly question, but are you sure the iOS devices (iPhone, iPad, iPod touch etc.) are still trying to connect to the same network from your own Airport router, as the MacBook Pros are? If you tap Settings on them, is the network name next to where it says Wi-Fi, the right one?
    I've got a weird feeling that either in the past couple of days, a neighbour got an Airport device and hasn't set it up yet (causing your iOS devices to try to help), or that perhaps there's an issue with your Airport router and they're noticing it and trying to help out, while for whatever reason, Airport Utility isn't opening itself on the MacBook Pros like it normally should if there's a problem.
    If you open Airport Utility on one of the MacBook Pros, does it report any problems with your Airport device, and can you view/edit the settings on it?

  • Hello i have a question: I have a MacBook Pro and it takes 35 sek. to get starter. is that normal?

    Hello I have a question: I have a MacBook Pro and it takes 35 sek. to get starter, is that normal?
    because I think it's too long?

    What makes you think it's too long? Actually 35 seconds is pretty fast.

  • I started using LT 4 and I have a serial number, also upgraded to LT 5 and have a serial number. Now I just bought a new Macbook Pro and installed the LT 5, but it doesn't accept my serial number. Why?

    I started using LT 4 and I have a serial number, also upgraded to LT 5 and have a serial number. Now I just bought a new Macbook Pro and installed the LT 5, but it doesn't accept my serial number. Why?

    When you installed the Lightroom 5 on your MacBook, did it ask for both serial numbers. Since you purchased Lightroom 5 as an upgrade, you need both the serial number from your original purchase as well as the new serial number for Lightroom 5. If you have both of those numbers and they are still not being accepted then you will have to contact Adobe customer support for a solution.

  • I just purchased a macbook pro and was wondering about an install disk.  It seems to be missing some of the applications that should be on it from a fresh install.  I was wondering if I would have to purchase a new OS and do a fresh install?

    I just purchased a macbook pro and was wondering about an install disk.  It seems to be missing some of the applications that should be on it from a fresh install.  I was wondering if I would have to purchase a new OS and do a fresh install?

    Ahhh, well  you never mentioned that before. You need to contact your friend from whom you purchased the computer. He/She should have any and all install discs for any third-party software included as well as for OS X and the original pre-installed software.
    Apple will gladly sell you replacements for any discs that did come with the computer originally, but they will not do anything for you because you purchased the computer used. If it's in warranty still, then you can get any warranty covered things taken care of through AppleCare:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support visit online support site.

  • I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel?

    I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update, it says the latest version is unavailable to the U.S. I can't access photos

    I updated the latest version of iOS software on my Macbook Pro and now when I try to open up iPhoto it says that I need to update the latest version. But when I go to update on iTunes, it says the latest version is unavailable to the U.S. I wouldn't mind leaving it be but I can't access any of my photos. What do I do?

    stuckoncc wrote:
    I updated the latest version of iOS software on my Macbook Pro
    iOS is on iPhones and iPads.
    Are you using an iPhone or iPad?

  • I have a MacBook Pro and my word has frozen up, I haven't saved my work, how can I fix it?

    I have a MacBook Pro and my word has frozen up, I haven't saved my work, how can I fix it?

    You can't fix it but if you have activated Words autobackup system you may be able to get some of it back.
    Have you?

  • Streaming music between Macbook Pro and IMac

    Sorry if this seems a stupid question to you, I don't even know if its possible or not but was hoping someone could help me.
    I was wanting to know if you can play music from your Macbook Pro and have it play through your IMac Speakers through the wireless network?
    Any help appreciated.
    Thanks alot,
    Curtis

    Rogue Amoeba writes that kind of software.  I don't know if they have one for doing that.

  • HT1296 I just bought a new MacBook Pro and moved data over from my old MacBook Pro.   Everything seemed fine at first but Outlook 2011 for Mac will not run.  It just flashes the Outlook logo briefly and then closes.  Help!

    Everything seemed to work fine after moving everything over from my old MacBook Pro at first but I cannot run Outlook 2011 for Mac.  The logo displays briefly and then the app closes.  It never really even gets anything loaded other than the little logo.

    Try removing and reinstalling Outlook
    Next try posting in a more appropriate forum. this is the iPod touch forum

  • I have a macbook pro,and my finger swipe to make the text larger isn't working... is there a setting i have to check to make this feature work again?

    on the mousepad of the macbook, if you take your thumb and index finger and swipe them either together,or apart,it make the text smaller or bigger... this used to work on firefox,but doesn't seem to work anymore,and i was wondering if there is a setting that i can change to get this working again....

    Some gestures have been removed in Firefox 4 and later.
    You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
    browser.gesture.pinch.in -> <b>cmd_fullZoomReduce</b>
    browser.gesture.pinch.in.shift -> <b>cmd_fullZoomReset</b>
    browser.gesture.pinch.out -> <b>cmd_fullZoomEnlarge</b>
    browser.gesture.pinch.out.shift -> <b>cmd_fullZoomReset</b>
    browser.gesture.pinch.latched -> <b>false</b>
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold(user set).
    *Preferences can be reset to the default or changed via the right-click context menu.

  • I have a separate keyboard and mouse to use for my 13" MacBook Pro and I was wondering if there is need to actually "safely" disconnect such types of usb (like a printer) from the laptop! Thank you!

    I have a keyboard, mouse, and printer that I connected to my 13" MacBook Pro through their provided USB cables. I wanted to know, do I need to "safely" disconnect these specific devices or is it ok to just pull them out? My reason why is that I had put in my USB blood glucose meter to charge on here and without thinking pulled it out––a message had popped up saying that I need to safely disconnect devices or they could become corrupted or something like that. I looked up information on how to disconnect a usb and they said that there would be an icon in Finder that I could drag to the trash and that would allow me to safely disconnect the device. If you have any information please help me because I got this laptop 2 weeks ago and I'm still learning a lot about it! Thanks for your time!

    I use a usb adapter so i can have my mouse and other things plugged in all the time - i can safely disconnect the mouse and keyboard anytime with out having to eject - i would eject things like devices with IOS and external hard drives.

  • I have a MacBook Pro and have just switched from Windows, I would like to know if it is possible to download somehow my Collins Talking English and talking French Help please

    I have a MacBook Pro opperating on Mavericks, Apple is all new to me having switched over from Windows, my question is, I have been unable to download my two COLLINS talking English and French, both worked well on Windows but will not  download on my MacBook, is there a method or way to download,  help please

    I don't know these programs myself, but I suspect they are not written for Mac (if they are, it will say so on the packaging somewhere).  If they are Windows only, then your only alternatives are as follows:
    You can use Boot Camp which comes with your Mac to install a copy of Windows on your Mac so that you can boot into windows and run this software via Windows.  This, of course, requires you to have a copy of Windows that you can install on the Mac. Copies of versions of Windows can be purchased via e-bay etc.
    Alternatively, see if you can find similar software that is Mac compatible (this may be a cheaper option) on Amazon or other sites.

  • Motorola HS820 will not pair with my Macbook Pro and now audio is broken...

    My problem is two fold.
    First i cannot connect my Motorola HS820 Bluetooth headset to my Macbook Pro. The bluetooth assistant pairs it succesfully but when it connects it immediately disconnects. All of the posts i that address this are either for g4 macbooks or do not work for me...
    Second, now that i have attempted this connection i am having issues with several apps including firefox and mediacentral. Audio from these programs will not play. I get an error message saying there was a problem with configuration..

    This is not related to the Intel platform (MacBook or MacBook Pro). Make sure the headset is turned on before you turn on your Mac. Then it should connect correctly.
    To change the sound outpu, please go to Mac OS X > System Preferences > Sound > Output and change it back to the internal speakers.

Maybe you are looking for

  • Hww to implement Sender function in XSLT

    Hi kindly any one give me a idea about implementing the sender function present in graphical mapping usinfg XSLT sender > fixedvalues> xxx(field in receiver) this flow is in graphical mapping. how will i implement the above logic using XSLT. kindly h

  • How can I add photos to my iPhone?

    How can I add photos to my iPhone 3GS? I used to do it on my 2G, now I can't seem to remember how.

  • I Mac G5 Start up

    I have one of the early models of the imac G5 and have recently experienced some start up issues, it will start up and then freeze after running for half an hour or show up a kernel panic telling me to restart or it will start up have 3 high pitched

  • Multiple Stored Procedure Versioning

    Hi All, MS SQL Supports, Multiple SP Versions, Does oracle support automatic code translation, can it handle Multiple SP Versions ? Stored Procedure Version information: http://www.sqlservercentral.com/columnists/awarren/versioncontrolforstoredproced

  • .Mac web galleries with Aperture

    Hi all, I use Aperture for all of my photography needs however, I'd really like to be able to use the .Mac web gallery feature of iPhoto '08. I haven't bought iLife '08 yet because I'd like to know how this would work... Can anyone give me an insight