Question for Post Installing of Windows 7

Does anybody know how to not have the drive for Windows pop up on the Mac side of the desktop. It is showing a drive on my Mac Desktop and when I click on it, it has the Windows programs. I really want it not to show up there. Thanks

In Windows, do the following:
1 - Windows start button > right-click Computer > Manage > Disc Management
2 - Right-click the Windows drive (probably labeled 'C:\') > Properties
3 - On the General tab, type or copy the text below including the period at the beginning into the description field at top of dialog:
.windows
and then click 'Apply' button if available, or just OK.
This will hide the drive from the desktop but will still be seen in Finder sidebar, Disc Utility and Start-up Disc.
Note - if you do not have a two button mouse, you can bring up any properties dialog by selecting the item you want and pressing 'Alt+Enter' in Windows.
Note #2 - edited thrice for clarity in description (typing too fast and not checking here):(
Message was edited by: CorkyO
Message was edited by: CorkyO
Message was edited by: CorkyO

Similar Messages

Questions regarding Clean Install of windows 10 on my HP 2000

This doesn't answer any of 3 questions that I've asked

Hello! I've bought this laptop around 2.5 years ago and it came with genuine Windows 8. When 8.1 came out, I updated it. Now, obviously, I was able to update to windows 10. However, it's my desire to do a clean install. After spending hours researching this stuff, I reliazed that some aspects of it might turn out to be more difficult than others. I'll just lay it down point by point and list my questions at the end. 1) My Version of Win10 has been activated (double checked)2) I want to re-install Win10 using boot drive (USB/DVD) unless there is an easier way3) I understand the basics of creating a boot drive, and Microsoft seems to have a very nice utility already prepared for this4) I want to completely re-install windows 10 as if this was an absolutely new laptop Now for the questions that I've developed: 1) If I was to use USB for media boot drive, I understand that I need to delete everything on it because this utility will wipe everything on it anyways and will store windows "image" on it. Do I need to do some special kind of defrag on it? Will I be able to use it after I'm done installing Win10, or it will stay as dedicated image? 2) On forums they write a lot that there might be some issues entering BIOS and changing the "boot options" to USB/DVD on laptops. My BIOS configuration is F.3A - 06/13/2013 - can somebody provide me with exact instructions how to execute this procedure properly? 3) One of the aspects of installing Windows is dealing with partitions. Now, on desktops as far as I know there are usually as many as external storage harware devises there are ( plus the ones user manually created). I've never messed around with my partitions and recently I've found out that I have 7 of them (screenshot). When going through installation, I will need to choose which partitions to put my windows10 on. And this is where I'm very confused. Will I need to delete some partitions prior to installing Windows? Which one do I put it on? Do I need to defrag any of them? This laptop came with genuine Win8, does this matter? Whoever will spend time answering these questions - thank you!

Copyright question for posting to the web

hi all.
i am wondering if someone wouldn't mind giving me a bit of expertise on a question i have.
i have a set of images from various sources that are basically creative imagery. i have organized these and i would like to share them by posting them to an album on my flickr account.
i have named the files with the topic and the photographer and i am wondering if it is likely to create a problem. in /most/ cases these images are actually from the New York Times so the file name says "architecture house_ray jones NYT.png" or whatever.
is there a hard rule against this? is it possible to give attribution in the photo explanation and be OK?
thanks for any advice.

You'd have to contact the copyright holder to find out what you can do with the images.
from the NYT website:
2. CONTENT ON THE SERVICES
2.1 The contents of the Services, including the Site, are intended for your personal, noncommercial use. All materials published on the Services (including, but not limited to news articles, photographs, images, illustrations, audio clips and video clips, also known as the "Content") are protected by copyright, and owned or controlled by The New York Times Company or the party credited as the provider of the Content. You shall abide by all additional copyright notices, information, or restrictions contained in any Content accessed through the Service.
2.2 The Services and Contents are protected by copyright pursuant to U.S. and international copyright laws. You may not modify, publish, transmit, participate in the transfer or sale of, reproduce (except as provided in Section 2.3 of these Terms of Service), create new works from, distribute, perform, display, or in any way exploit, any of the Content or the Services (including software) in whole or in part.

Post-Install Issue - Windows Installer runs every time CRW XI R2 loads

I have XP SP3. If I uninstall CR XI SP2 and re-install CR XI from cd, it loads perfectly - no windows installer. When I uninstall CR XI, and re-install CR XI SP2 from the saved download on my harddrive, the Windows installer runs every time I load it; it seems to think it's never been run before. Takes 3-8 minutes to load every time, which is completely annoying.
I have also tried downloading that full build of XI SP2 3 times - and uninstalling/reinstalling. Makes no difference.
I know this is not a design issue, but I didn't know where else to turn. I have been tolerating this issue for about 18 months and I can't take it any more!
Thanks!

Hi,
Please try using other computer units then update me the result, the purpose is to check if your unit OS may be the problem.
Regards,
Clint

Advice for clean install of windows 8.1

I finally figured out how to install windows 8.1 from an 8.1 iso and get rid of Toshiba's bloatware. The computer ran so much better, however, I could not get the wifi installed and there was another missing PCI driver.
I went ahead and restored back to the default toshiba image to see what it had configured. Is there a folder on the computer I can copy that has all the drivers? Or even a set of drivers or program to go out and get the correct drivers?
I have a Satellite L55-B5267. I used all the drivers I could find on the site and it didn't seem to be the correct ones.

Nevermind.. I figured it out.. see here;
http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Here-are-instructions-to-install-clean-Win...

How can I dual-boot Windows 7 with pre-Installed Windows 8.1

Hi, I have a Toshiba Satellite C55-B5362 with pre-installed Windows 8.1.
Make DualBoot Windows 7 and Windows 8.1 (both 64 bit), so, I don't know how to do this. If I set BIOS to CMOS and Install Windows 7 disabling Secureboot, I will lost all the pre-installed Windows 8.1 and the OEM licence.
and other question... if the upper is not possible. Okay. I will delete Windows 8.1 and Install Windows 7 permanently until Windows 10 is released, but.... If I have Windows 7 with CMOS BIOS and SecureBoot disabled, then supposing that I could have problems with Windows 7, and I want to upgrade to Windows 8.1 again, and supposing that I have a Recovery Partition backed in a USB drive, what can I do for re-install OEM Windows 8.1 and the licence.
Thanks.
Solved!
Go to Solution.

As I said above...
..you will need to install essentially all of them to make that laptop work as designed.
..install the TVAP before any other Toshiba utility.
-Jerry

Post instal Rapidwiz linux64 bit errors RW-50015 HTTP Listener

New Installation of R12.1.1 on Linux x86-64
using zip files from e-delivery
created staging dir successfully
Ran rapidwiz
selected new Installation and Express Installation
Rapidwiz worked and installed all files but it failed at the end during validation for post install
when showed screen for Validate System Config the post-install check:
I had error in HTTP (RW-50015: Error: - HTTP Listener is not responding)
details of error:
HTTP
checking URL = http://localhost.localdomain:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
some other facts,
I cannot run sqlplus, no access to database.
it seems environemt variables are not set as echo shows empty value.
since the HTTP RW-50015 error is known issue, i have tried several solutions, but no luck:
tried solution 1:
I was able to run APPSVIS_localhost.env
however i canNOT connect to sqlplus
therefore no access to database:
pwd
/d01/oracle/VIS/apps/apps_st/appl
[root@localhost appl]# chmod 777 APPSVIS_localhost.env
[root@localhost appl]# ./APPSVIS_localhost.env
[oracle@localhost appl]$ ./APPSVIS_localhost.env
[applmgr@localhost appl]$ ./APPSVIS_localhost.env
[applmgr@localhost appl]$ cd /d01/oracle/VIS/db/tech_st/11.1.0/bin
[applmgr@localhost bin]$ ./sqlplus
./sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
[applmgr@localhost bin]$
when echo oracle env variables they are all empty:
for example:
[oracle@localhost scripts]$ echo $APPL_TOP
Then I tried commands $ADMIN_SCRIPTS_HOME/adstpall.sh apps/apps and restart with adstrtal.sh:
couldn't even use script v as I got error:
[oracle@localhost VIS_localhost]$ cd /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts
[oracle@localhost scripts]$ ls adst*
adstpall.sh adstrtal.sh
[oracle@localhost scripts]$ ./adstpall.sh apps/apps
You are running adstpall.sh version 120.10
adstpall.sh: Database connection could not be established. Either the database is down or the APPS credentials supplied are wrong.
USAGE:      adstpall.sh <appsusername/appspassword>
adstpall.sh: exiting with status 1
also in another question in forum
RW-50015: Error: post R12 installation on Oracle EL 5 (X64)
it is asked to try this:
... commented out the following line:
#eval ohs_start -DSSL "$args"
... and replaced it with:
eval ohs_start "$args"
I have not tried this, i think my issue is with database and sql which cannot be accessed.
solution 2:
Tried workaround from Note 943443.1
but first i cannot see any file with # ls libdb*:
[root@localhost inst]# cd /usr/lib
[root@localhost lib]# ls libdb*
ls: cannot access libdb*: No such file or directory
after running the command from the Note:
[root@localhost lib]# pwd
/usr/lib
[root@localhost lib]# ln -s /usr/lib/libgdbm.so.2.0.0 /usr/lib/libdb.so.2
now, I can see libdb.so.2:
[root@localhost lib]# pwd
/usr/lib
[root@localhost lib]# ls libdb*
libdb.so.2
then click on Retry in the rapidwiz screen where it showed the error (Validate System Config)
but still fails with same error:
HTTP
checking URL = http://localhost.localdomain:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
solution 3:
tried to stop and restart services:
[oracle@localhost VIS_localhost]$ pwd
/d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost
[oracle@localhost VIS_localhost]$ ls -ltr add*
-rwx------. 1 oracle oracle 2785 2009-12-02 17:37 addbctl.sh
-rwx------. 1 oracle oracle 4119 2009-12-02 17:37 addlnctl.sh
[oracle@localhost VIS_localhost]$ ./addbctl.sh stop
You are running addbctl.sh version 120.1
Shutting down database VIS ...
sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
addbctl.sh: exiting with status 127
[oracle@localhost VIS_localhost]$ ./addbctl.sh stop
You are running addbctl.sh version 120.1
Shutting down database VIS ...
sqlplus: error while loading shared libraries: /d01/oracle/VIS/db/tech_st/11.1.0/lib/libclntsh.so.11.1: cannot restore segment prot after reloc: Permission denied
addbctl.sh: exiting with status 127
your help is highly appreciated
thank you!

Thank you
items 1, 2 and 3 are answers to your questions,
I think you pointed to an important section as i have feeling something is
wrong with this simple default choice of localhost.localdomain.
please also see #4 as it has new information (the rapidwiz error are fixed now
but i still don't have access to anything)
1-) file: /etc/hosts
i have 2 lines in this file
[oracle@localhost etc]$ pwd
/etc
[oracle@localhost etc]$ cat hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost.localdomain localhost localhost6.localdomain6
[oracle@localhost etc]$
2-) file: /etc/sysconfig/network
i have 2 lines in this file:
[oracle@localhost sysconfig]$ pwd
/etc/sysconfig
[oracle@localhost sysconfig]$ cat network
NETWORKING=yes
HOSTNAME=localhost.localdomain
3-) per step 3- of note 761564.1 I deleted file (using root accout):
/etc/sysconfig/networking/profiles/default/network
(before deleting i made a backup network-bak, just in case):
[oracle@localhost default]$ pwd
/etc/sysconfig/networking/profiles/default
[oracle@localhost default]$ ls -ltr
total 16
-rw-r--r--. 3 root root 230 2009-11-29 19:12 ifcfg-eth0
-rw-r--r--. 2 root root 112 2009-12-02 16:42 hosts
-rw-r--r-- 1 root root 53 2009-12-03 21:31 resolv.conf
-rw-r--r-- 1 root root 31 2009-12-04 02:37 network-bak
[oracle@localhost default]$
4-)
I made so many changes to dir access permissions using chmod 777,
also i checked mark some of the apache entries in Linux > System > Admin > SE Linux Management.
after that i accidently clicked on the "Back" button (on the rapidwiz screen where it had
the errors),
then I clicked Next button ( which of course went to the same screen I had error on )
then I clicked on Retry button and it appeared it fixed errors.
Rapidwiz confirmed all sections are ok,
no errors anymore.
(Previously i always clicked on Retry button only, but this time, clicked on Back, then, Next button,
then Retry button).
I am not even sure changes i made fixed the errors or this is just a bug in rapidwiz,
but right now, I completed rapidwiz and all errors are fixed,
however I still don't have access to anything:
Started firefox and try to go to:
http://localhost.localdomain:8000/QA_HTML/AppsLogin
it says Unable to connect
(by the way do I have to download IE and try in there or should it work in Firefox as well ?)
I am unable to run sqlplus
I don't have anyvalue in the environment variables, they are still empty.
I also ran steps 2.2 and 2.3 from note 3877859.1 (using AutoConfig to manage System Config EBS R12):
2.2
[oracle@localhost /]$ sh /d01/oracle/VIS/db/tech_st/11.1.0/appsutil/scripts/VIS_localhost/adautocfg.sh
AutoConfig completed with errors.
2.3
[oracle@localhost /]$ sh /d01/oracle/VIS/inst/apps/VIS_localhost/admin/scripts/adautocfg.sh
     Configuring IES_TOP.......COMPLETED
     Configuring CSD_TOP.......COMPLETED
     Configuring IGC_TOP.......COMPLETED
AutoConfig completed with errors.
still same problem, didn't change results.
Thank you for your help!

In the middle of the installation processing, this has appeared: "There is a problem with the windows installer package. A program is required for this install to complete could not be run." my question is, what is that specific program?

in the middle of the installation processing, this has appeared: "There is a problem with the windows installer package. A program is required for this install to complete could not be run." my question is, what is that specific program?

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Very simple question, how do you configure windows 8.1 to use a SF card as the default install location for software applications?

Very simple question, how do you configure windows 8.1 to use a SD card / external drive as the default install location for software applications? Primarily interested in apps installed from the windows store. This should be available in the settings
charm within the windows store. This must have been overlooked in the development of windows 8.1 or is a bug.
Regards, Bill
* update
I've tried modifying this key and the path:
“HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx”
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-do-you-install-apps-in-windows-8-from-the/c4fbe2a8-fd3d-41c1-b9a6-6f881eed374f
Also tried using symlinks as detailed here:
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral

Here's some links I've used to try to figure this out:
http://social.technet.microsoft.com/Forums/windows/en-US/2dfc0cd9-7d1b-41de-abce-e03fb6a5a383/metro-apps-not-working-in-windows-8-pro-x64-after-moving-users-and-programdata-folders?forum=w8itproinstall
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral
http://social.technet.microsoft.com/Forums/windows/de-DE/f5e33ac9-beab-4b99-b3ca-7cb5e6f415e4/how-do-you-change-metro-apps-default-install-location?forum=w8itprogeneral
Regards, Bill
The registry method does not work with 8.1. I found this out the hard way. Doing it on 8.1 will leave you reinstalling the OS if you didn't do a SRP beforehand.

Question for installing Solution Manager & ECC 5.0

Any idea for installing Solution Manager 3.2 on Windows server 2003 with Oracle9i problem when install Database Instance. Installation failed when the intallation progress went to Oracle Post-Load Action.
The message from startsap log file is
"running C:\usr\sap\T01\SYS\exe\run/sapstart.exe name=T01 nr=03 SAPDIAHOST=saptest02 -Wait
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
CreateNamedPipe for
saptest02\pipe\SAP01_03 Failed, Extended Error #2
start service SAP01_03 on machine
saptest02
OpenService of SAPT01_03 failed. Error#: 1060
C:\usr\sap\T01\SYS\exe\run/sapstart.exe=>sapparam(1c): No Profile Used."
Another question is about installing the Oracle database software: should we choose Create Databse or not when install Oracle Server Software only?
Is my installation process as following correct?
->SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
install Oracle9i Client 9.2.0.1.0->Administrator
Thanks a lot

Hi Shusen, I´m trying to do the same think (Install ECC IDES with Oracle 9i in one computer for educational propose), can you help me with this:
1.I made the same Oracle install process because when I tried with sapserver.cmd nothing happened, for that reason i made:
SELECT A PRODUCT TO INSTALL:
Oracle9i Database 9.2.0.1.0
->WHAT TPYE OF INSTALLATION DO YOU WANT:
Enterprise Edition
->SELECT A DATABASE SUITED TO YOUR NEEDS:
Software only
After end of installation
I did not install client, is this correct?
2.After install this, I run the sapins.exe but show me this error: INSTALL FIRST SAP J2EE ENGINE, I download the JAVA SDK from JAVA page (java_ee_sdk-5-windows) but did not fix the problem: Do you know what file is this? Or, where is it in the DVD installation?
Thanks in advance if you or somebody can help me and excuse me if the answers are obviously, but I´m not a system engineer I´m only try to install IDES for learn SAP WM.
Thanks.

I am trying to install iTunes on my PC, but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." Help!

I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!

Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario

When I installed iTunes 10.6 to windows 7, during the process i got this message -" There is a problem with this windows installer package. A program required for this install to complete could not be run"

when I installed iTunes 10.6 to windows 7, during the process i got this message -" There is a problem with this windows installer package. A program required for this install to complete could not be run" and after that the setup closed automatically. Plaese tell me if any setting up of windows is in order.

Try looking at the two previous discussions listed on the right side of this page with your same question.
Also, try searching/posting in the iTunes forum since you do not have an iPod problem.

NO Lenovo Windows 8.1 Recovery DVD for CLEAN INSTALL! + unable to Install UEFI MODE

Hi,
I Just bought 25 Thinkpad T431s Laptops for my company (@ISRAEL)
All of them came with windows 7SP1 Installed And Recovery is Windows 8 (not 8.1 even though 8.1 is out for a yr!)
The Install process takes 3 Hours!!! Just for upgrading to windows 8.
Then I need to upgrade to 8.1 - the process is about 3 hours more! Because I need to Register And create Microsoft account for each user then to verify the account.
After that I need to Log with the account to the PC And then Download the update (3.5GB) And Install it.
IS ANYONE AT LENOVO THINKS THAT ITS ACCEPTABLE?
DO I WORK FOR LENOVO? DO I NEED TO SPEND 6 HOURS FOR UPGRADING EACH LAPTOP?
Don't forget that after that I need to uninstall all the bloater from the PC. Like Symantec AV (Because Enterprise company's uses Enterprise Class AV, FW And other software. We uses Kaspersky Enterprise, ESET, And others...)
AND ABOVE ALL.
If I want to Install Original Windows 8.1 I can't!
Because the OS Recovery DVD is not bootable And contain special recovery files with special extensions. Also, there is no PRODUCT CODE! Just "WINDOWS 8" sticker logo on the back of the notebook.
SO I WANT TO KNOW WHERE AND HOW(!)
I CAN GET A WINDOWS 8.1 ORIGINAL ISO IN ORDER TO INSTALL IT ON ALL MY PC's.
I want to know why I can't Install Just the "OPERATING SYSTEM RECOVERY DISK" (A standard clean Install)
== When I tried with my own Windows 8.1 Pro VL \ RETAIL ISO to Install it didn't pass activation==
==================== not even with the extracted key from the bios=====================
FYI - WHEN I BUY DELL OR HP LAPTOPS I'M GETTING A WINDOWS 8.1 PRO X64 BOOTABLE DVD DISK in addition to the 2 DVD RECOVERY DISKS. (So I am able to Install windows Without all the that you And them put into the recovery disk set).
Customer service in ISRAEL said that this is not possible! And that the only way is:
1. Use the 3 DVD recovery disks to format And Install windows 8.0
2. Register the user with a Microsoft account
3. Log in to each PC with his own Microsoft account
4. Download 8.1 update from Microsoft store
3. Install the 3.5GB update.
4. uninstall all the bloater.
So can I please ask you to confirm the answer I got from LENOVO ISRAEL. If So, ill return the laptops And that will the last time ANY OF MY COMPANY'S WILL EVER BUY ANY NOTEBOOKS OR TABLETS FROM LENOVO!
In addition, im trying to figure out how can I contact Lenovo main office to file a complaint against Lenovo Israel.
CEO Ms. Sigal didn't do anything to try And solve the issue, the product manager Mr. Many talk with me on the phone And was very rood. At the end he hang up the phone in my face! After I proved him wrong in another issue (T440s T431s cannot be installed with UEFI Because External DVD drive does not support UEFI Install only Legacy. And there is a big different between Legacy And UEFI)
Thank you.
Moderator note; profanity / implied profanity edited. Forum Rules

Hi ohad, welcome to the forums,
I'm sorry to read about your experience.
I don't work for Lenovo but it would appear to me that something may have gone wrong at the sales / purchasing stage; to my knowledge the T431s is only available with Windows 7 preload, (with Win 8 recovery discs in some cases as you have), or with Windows 8 preload. A Win 8.1 preload doesn't appear to be available for the system, but I stand to be corrected on this. If you required Windows 8.1, in my opinion the better option of the two, would have been a system with the Win 8 preinstall as this would only require updating to Win 8.1
Unfortunately I also can't envisage Lenovo creating a factory image for the T431s because it must be pretty near end of life.
You might find the following to be of interest;
http://forums.lenovo.com/t5/Windows-8-and-8-1-Knowledge-Base/Why-can-t-I-boot-from-a-USB-key-on-UEFI...
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Every time I try to download I tunes I get this errorthere is a problem with this windows installer package. A program required for this install to complete could not be run. Contat yur support personnel or package vendor.

there is a problem with this windows installer package. A program required for this install to complete could not be run. Contat yur support personnel or package vendor.

Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Help for downloading/installing PSE13 with window 8.1?

I get this message after intall attempts ..."Installer has detected that a machine restart may be pending. Its recommended that you quit the installer, restart your machine and try installing again," Lightroom, however, installed fine.

Thank you for responding. I got some advice from a Microsoft forum....it worked. Thanks again.
From: Pat Willener <[email protected]>
To: kathryn kramar <[email protected]>
Sent: Saturday, January 3, 2015 10:56 PM
Subject: help for downloading/installing PSE13 with window 8.1?
help for downloading/installing PSE13 with window 8.1?
created by Pat Willener in Downloading, Installing, Setting Up - View the full discussion
pwillener wrote: What is your operating system?
Sorry, you specified Windows 8.1 in the subject line. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7063274#7063274 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7063274#7063274 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Question for Post Installing of Windows 7

Similar Messages

Maybe you are looking for