Question for pros

Ok this is my problem. I create a leave request page,
the employees log in. After they log in it takes them to a
calandar. On the calandar they request the leave by clicking a
check mark box next to the day they are requesting and hit submit.
And the record is updated. To prevent duplicate entrys in our
database, if the employee wants to request additional leave for
that month they login and return to the calandar. The calandar
already displays the days that they have prevously requested. Now
this is my problem. It displays the days they prevously requested
as planed, but I want to block the user from changing any of the
exising checkmarks from a prevous request. Is it possible to Gray
these out or hide these fields with checkmarks. Thanks for you help
in advance.

Just set the attribute disabled="disabled" in the checkbox
tag of those that
they have already entered.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"lands1ide" <[email protected]> wrote in
message
news:ee9f7o$qnp$[email protected]..
>
Ok this is my problem. I create a leave request page,
the
> employees
> log in. After they log in it takes them to a calandar.
On the calandar
> they
> request the leave by clicking a check mark box next to
the day they are
> requesting and hit submit. And the record is updated. To
prevent
> duplicate
> entrys in our database, if the employee wants to request
additional leave
> for
> that month they login and return to the calandar. The
calandar already
> displays
> the days that they have prevously requested. Now this is
my problem. It
> displays the days they prevously requested as planed,
but I want to block
> the
> user from changing any of the exising checkmarks from a
prevous request.
> Is it
> possible to Gray these out or hide these fields with
checkmarks. Thanks
> for you
> help in advance.
>

Similar Messages

Question for pros: should I keep this 23" ACD?

I have a new "23 six days to evaluate whether to keep or exchange it for a different one. I'm a pro photographer and this is my first large LCD other than the 17" on my MBP. I could use a little advice on whether to keep this or not for the following reasons:
Overall in normal conditions the illumination is even and there is little or no pink (magenta) tint. It calibrates well with my Eye-One puck. There is a little ghosting of white windows (like browsers) after they've been up several minutes but it's faint and they fade and that doesn't bother me too much, though I do notice it occasionally. The main issue is the backlight leakage in deep blacks when the room lights are down. It is in the lower part of the monitor, mostly concentrated in the corners. I do notice it in the uncommon photos that have a lot of black in them, mostly ones shot at night.
Is this common behaviour for all these monitors? I don't expect perfection but would like to know if this one should be returned for another, whether I can expect to find a perfect one. If it's typical for all LCDs I'm fine with this, but if it's not, perhaps I should be thinking exchange.
I've kind of decided to go Apple because Iezo (sp?) are kind of expensive and I've seen photographers on the galbraith forums complain about highly restricted angle of view on the Dells.
Many thanks in advance for any thoughts.
dave

You should expect perfection and as a photograph you need to be sure of your display! Send it back direct and make an complain, don´t do what I did, expect Apple to take special care of pro people.
If you don´t get it fixed, turn it back! It´s several pro products out there ( maybe not so good looking), even if LaCie is a sometimes stange company, thay always been taking care of defect products (even after warranty is out).
Don´t accept any ghosting at all, not for that price!
Thats my advice, since I have 4 of them and after one yera they start to show up tha bad quality ( you know, the exact limit of the warranty must be calculated in
knowledge of this.........)
G5 Quad Mac OS X (10.4.6)

Easy questions for Pro about ASM block size

hi
how can we change DB_BLOCK_SIZE in ASM (while instalation)
we have a default of 4096

As for databases 'later' is not possible. I'm not sure what happens when you choose another blocksize at creation time. ASM blocksize is only for metadata,it's not related to the actual database data (having the database blocksize) stored in ASM diskgroups.
These are the blocks which are used for extent maps in shared pool.o you dont need to worry about this blocksize difference.
here is the actul link that i copied over from(above)
ASM instance's block size

Question for Pro Photogs - Sports Related - (Nikon)

Is there a way to "Tag" photos (like the Lock Photo works in PhotoMechanic) on your camera so Lightroom only displays the "tagged" photos on import? Obviously this would be a huge time saver when trying to transmit at let's say half time of a football game.

See John Beardsworth's "Locktastic" plug in here: http://www.photographers-toolbox.com/index.php
It performs a smilar function.
If you already have Photo Mechanic, it's probably faster to do your initial selections in PM, then drag only the selected images to LR for importing and editing.

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question. When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?

One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

Is this forum also used for Pro*'C Questions?

.

This is not a good forum for Pro*C, because although Pro*C is now shipped with Studio, it is an Oracle DB product.
An Oracle database programming forum is the best place to look. A list of forums is here:
https://forums.oracle.com/forums/category.jspa?categoryID=18

'Genius' related question for anyone with over 1.2TB of music?

Anyone out there with a iTunes library with over 1.2TB of music?
Reason I ask, is that I've not been able to solve a problem in updating Genuis - I'm getting the error - 'Genius results can't be updated right now. There is not enough memory available ~ Please try again later.' or the 'unknown 4002 error'. The steps I've taken to try and correct sometime back can be found in https://discussions.apple.com/message/12584815#12584815 and also shown here in sequence below.
I keep thinking this will be fixed with the next version iTunes but so far with the latest, things still the same. So looking to see if anyone with a similar size library is having similar problems and it just a limitation of the program or it's something specific on my end that I can fix.
Appreciate...
Up to this weekend I've had not issues with Genius. Worked beautifully and updated last Sunday as I have been doing every week since Apple added Genius. Yesterday I added a few albums and went to update and now getting the error of 'Genius results can't be updated right now. There is not enough memory available ~ Please try again later.' Now my library is well over >200,000 songs and only added 6 albums this time. Music sits on a external 2TB drive ~100GB free and my MacBook Pro has over 60GB open. Running latest Mac OSX and latest iTunes. Nothing new installed or changed since last Genius update.
To the points raised in this thread.
1. I've been updated weekly with a Library with over 200K songs till now with no problem. Majority is what I've ripped from my albums & CDs.
2. Deleted the albums recently added since last successful update - same result.
3. Connected directly to the network bypassing router as suggested here - same result.
4. Reinstalled iTunes program - same result.
5. Repaired permissions - same result.
Problem remains. Welcome any additional thoughts.
Question for anyone with a music library
https://discussions.apple.com/message/12584815#12584815
Ok, tried all the suggestions here yet the problem remains.
In addition what I posted above -
1) Dumped the cookies in user/library/cookies folder
2) Deleted the apple cookies found under Safari Preferences "Show Cookies"
3) Repaired disk permissions
4) Deleted iTunes Library Genius.itdb file
5) Reinstalled iTunes (with the new 10.1 version)
6) Restarted computer
7) Rebuilt iTunes Library folder http://support.apple.com/kb/ht1451
8) Deleted all iTunes dead tracks
http://dougscripts.com/itunes/scripts/ss.php?sp=removedeadsuper
9) Increased internet access speed
10) Removed all open "[" and '}' brackets from songs, albums & artists
10) Rebuilt my entire library from scratch!
Is there anyone out there with over 200K songs that can update their Genius? One thing I noted is the genuis.itdb file is just over 2GB. I'm wondering if there is a maximum size on this based on the error I'm getting. Any thought or know info on this?
Ok, think I may have found something here with this. I backed out all the music added prior to this problem occurring and ran the Genius update. All worked fine. I then started adding the music back little by little (running the update each time) until the problem returned. When the problem came back I ruled out the specific music added by backing that bit out, verified all was ok and added a different batch back in.
Bottom-line it appears that when my library exceeds exactly 1.208TB the problem appears. Interestingly enough it does not appear to be related to the number of songs, the size of the genius.itdb file (in fact when it was working the file was at 2.25GB - larger than what I reported before). It specifically seems to be related to the size of the overall library - when I have it for example at 1.2079 all is ok, 1.2081 it fails with this error.
I did try moving the library and related files to the external drive but same result. abavetta, I think your suggestion of this script may be a workaround for now - although from what I read, is this not the same that you can do anyway with iTunes by holding the alt/option key open start up? In fact I do have two libraries now - one with the 2TB drive which I use at home and another for 2x500GB disks I carry with me when i travel. I just reported the same back to Apple but doubt if any immediate solution will come for this. Too bad as one of the great things about having such a large library is the mixes you can generate via Genius. Anyway, such is life and will just live with this for now. I also just found this program called Tangerine! http://www.potionfactory.com/tangerine/ which creates playlists like Genius - although through a different technique I might also take a look at.

Just to let all know that may be having a similar problem, what I found by accident to fix this problem.
Reset all my Home Folder permissions using the resetpassword method from the startup utility in Lion. Then turned off/on to reset Genius and cleaned out the cache folder for good measure. Finally after more than a year without, have Genius up and running again.

Mini vs. Quicksilver for pro apps--which would you recommend?

Hi all,
I've been running the Adobe CS2 Suite of applications (Photoshop, InDesign and Illustrator) on my Mini 1.42GHz/1GB RAM with not very pleasant results. Even if only one of the apps is open at any given time, the performance is painfully slow and the spinning beachball is always making an appearance.
Now, I've also got a Quicksilver 2002 800MHz/1GB sitting currently collecting dust in a corner of my office. I "upgraded" from the Quicksilver to the Mini because I had grown sick and tired of the incredibly loud fan inside the Quicksilver.
My question is this: Should I bring the Quicksilver out of retirement to do the Adobe CS2 work? I realize that the machine only has an 800GHz processer versus the Mini's 1.42 GHz, but it (the QS) also has a 7200rpm hard drive versus the mini's 4800rpm hard drive.
If I use the QS instead of the Mini, will I see a performance increase, a decrease, or just about the same?
I'd love to hear feedback from any of you out there who have used both the Quicksilver and the Mini, especially in conjunction with Adobe CS2 or similar CPU-hungry pro applications.
Thanks!

I would agree with Doug - that typically for 'pro' application use, it would be better to use a 'pro' system, even if older.
As an example, I have a mini on my desk, running alongside a 6+ year old G4 tower. The G4 has had a second video card added to drive up to 3 displays, has had the original HD replaced by a high speed larger capacity unit, a second drive of similar spec has been added, a third SCSI drive is also in the system for booting specifically for photoshop, the RAM has been upped to 2Gb, and the original 450MHz processor has been replaced by a modest 1GHz unit. Total cost of the upgrades was less than the cost of a mini, the G4 is pretty much of similar 'speed', but the flexibility of the design allowing the additional and faster drives and video has made the G4 the system that gets used most when heavy duty workload is being done.
That's not to detract from the mini's great strengths - it's a fast, compact and powerful system for a wide variety of potential uses and that is more than ample for the majority of users. The only thing that lets it down is the lack of flexibility and expansion/upgrade options, and for pro users, those are often of great criticality.

I have created a .png logo to use on my video. It has it's own storyline so the logo is shown overthe whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

Final Cut Pro 10.0.8
I have created a .png logo to use on my video. It has it's own storyline so the logo is shown over the whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Basic questions for a self-taught re: HDV for SD HDV (yes again)

ok - like many others posting on this topic, I am apologising for going over what seems to be one of the most covered topics out there, that still isn't clear!
I am trying to teach myself DVD SP4 in the same way I did with FCP5 (trial, error and lots of forum searching). I am by no means a pro on FCP - but have certainly got enough understanding of it to have cobbled together 7 23 minutes episodes to broadcast! I have gone thought the DVD SP4 Manual and forums and lots of it just makes my brain ache - what mostly lets down my understanding are formats/compression/codecs.
So - my main questions (for now....)
-In DVD SP I couldn't import my QT movie into my assets list as it was an "incompatible format" - is this because it was HDV to a SD DVD Project? Doesn't the process of DVD SP encoding it as Mpeg 2 make is SD anyway?
-I read a post from someone in a similar situation, who advised exporting a HDV sequence as Uncompressed 8 Bit, and bringing that to DVD SP. So am doing that now (6 hours or so for a 23" sequence) and am hoping it gives a great looking picture, but I have seen from its preview icon that its a 720 x 576 frame - why is it not exporting in 16:9? or will it squeeze that down to normal once it's in DVD SP?
Really appreciate any understand you can help me with.
cheers
Hugh

Hughey wrote:
Going back to my original questions - could the problem be a HD file in an SD project?
No. If you followed the workflow process from the above post you would have a SD mv2 file. The file should be playable in Quicktime and it should be 16:9.
EDIT: Yes. Reading back on your OP this question ->
In DVD SP I couldn't import my QT movie into my assets list as it was an "incompatible format" - is >this because it was HDV to a SD DVD Project? Doesn't the process of DVD SP encoding it as Mpeg 2 >make is SD anyway?
I believe that importing a HDV file into a SD project would give you that error but if you follow the above steps and import the mv2, AC3 files you should not get that error.
The reason you got three files is because that is how the preset group is made up. To be completely truthful I duplicated that preset, deleted the AIFF part and renamed the group. I now use that as my default settings when I bring any asset into Compressor.
As far as bring video assets (quicktime SD/HD, or other) into DVDSP in general you can do this but, what is happing is that in the background DVDSP is going through the steps from my above post and creating the mv2, AIFF, AC3 files for you (based on your preference setting in DVDSP) and then replacing the video files you brought in with the compressed files.
Can you play the mv2 file in quicktime? If not then something else must be going wrong.

IMac requirements for Pro Tools 10

Hi guys,
I'm currently working in a music studio as a producer. I've always been a Windows guy but as Pro Tools on the Mac is an industry standard, I need to migrate. I've never owned a mac before. I'm strongly swaying towards the iMac 27" with the 2.7ghz CPU and 4gb of ram. My question, does this system have enough punch for Pro Tools 10? I will often be using 10-15 tracks each with varying VSTs. Would this system struggle?
Many thanks guys :)

Hello Joel, & a wam welcome!
27" should do it, but I'd go for the 3.4 GHz i7, add the 2 GB Graphics option, extended AppleCare, & add More RAM yourself, as much as you can afford, up to 32 GB...
http://eshop.macsales.com/shop/memory/iMac/2011/DDR3_21.5_27
http://store.apple.com/us/configure/MC814LL/A?
http://avid.force.com/pkb/articles/en_US/compatibility/en419171
If you’re using Pro Tools HD 10, you’ll need a minimum 4 GB of RAM, but 8 GB is recommended (even more will be helpful if you want to use the new Extended Disk Cache functionality in Pro Tools HD 10).
http://www.sweetwater.com/sweetcare/articles/what-system-requirements-for-pro-to ols-10/

How can you change your security question for I tunes?

How can you change your security question for I tunes?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use

I have a new email address and my old email keeps coming up on icloud when trying to update apps and i don't know the password or security questions for the old email. I can sign in with my apple id which is tied to another email but not itunes how to fix

I have an apple id and it has my current email attached to it. however when i go to update apps it's asking for the password for an old email. I no longer have the old email and can't use it. when I go to icloud on my ipad it asks for the password for old email. it doesn't allow me to change the old email to current. when i go to reset it i can't remember the password or security questions for the old email so it doesn't let me go any further. How do I fix this? Do i need to call apple support?

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

I am having trouble answering my old security questions for my itunes account and it is creating a problem because I am not able to purchase apps/songs on my new IPAD. What phone number/email adress should I call to get a quick response to my issue?

I have recently bought an IPAD 2 for my girlfriend and have encountered a problem with purchasing apps through my itunes account. It is requesting that I not only enter my pasword (which I know) but answer my old account questions, which I have forgotten the answers to. It had since locked me out of changing my questions for eight hours. Is there any number I can call to prove that I am the real owner of my itunes account so my girlfriend will be able to use her ipad to purchase new apps without having to go through the trouble of using one of my other apple devices? Random information: I believe my questions were set back in 2007 when I purchased my first ipod nano, since then I have used this same itunes account for my own ipod touch and ipad 2 and my girlfriends iphone 1st generation. I have never run into a problem regarding my questions before on any of these devices

http://www.apple.com/support/itunes/contact/

Can somebody give some real time questions for alv report

hi guru
can somebody give some real time questions for alv report.
answers also.
regards
subhasis.

hi,
The ALV is a set of function modules and classes and their methods which are added to program code. Developers can use the functionality of the ALV in creating new reports, saving time which might otherwise have been spent on report enhancement
The common features of report are column    alignment, sorting, filtering, subtotals, totals etc. <b>To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).</b>
Using ALV, we can have three types of reports:
   1. Simple Report
   2. Block Report
   3. Hierarchical Sequential Report
<b>Reward useful points</b>
Siva

Question for pros

Similar Messages

Maybe you are looking for