Question for RSSM_OLTP_INIT_DELTA_UPDATE after system refresh

Dear expert,
I need to run RSSM_OLTP_INIT_DELTA_UPDATE , and only to told
After the execution of BDLS has completed, in the BW system: Execute report RSSM_OLTP_INIT_DELTA_UPDATE for each datasource, which has an active init request. Provide the field 'ALWAYS' with value 'X'.
This will push the init / delta information of the BW into the source system, thus allows to continue loading delta or to do a new init.
but how can i know what value to fill for the field LOGSYS & DATASOUR
I guess i should logon to Q11 then se16 to consult a table and note down the entry right? but which table which kind of entry i should note down?
thank you so much!
Kate

Hi Deepak,
Thank you for your quick action:)
my question: I query the table rssdlinit & rssdlinitsel in QAS BW right , since I check them in ECC , there is no entry in both table...
Thank you!
Kate
Message was edited by: Kate Ji
I now checked in the BW for the 2 table, they have the same records 200 records.
Now my question is
If according to the results of ECC(no hits) , i don't need to execute program
but if according to the BW(200 hits), i need to execute the program for 200 times ?

Similar Messages

After System Refresh Variants missing

Hi,
We have used Export / Import method to build QAS system from production
ABAP export file.
After System refresh we got the same Production client with all
configurations, Variants, Object including data.. Which is Perfect.
But, as per our business we don't want to use the same production
client number in Quality System., so we done Cliet Copy to copy to
different client (ex: Client 200) using SAP_ALL profile.
Question: But after client copy we found that some Data, Objects,
Variants are missing in the new client (200).
Ex: In Client 100 (Copy of production client) table T009 is having 10
entries, but after client copy in client 200 the same table doesn't have any
entry in that including standard and Z.
Please help me on this, how do I get clone / copy of 100 client
(original client)
Thank You,
Ramesh

Hi Ramesh,
Looks like your client copy didn't bring all the data and Objects, Did you checked logs, Is there any error message ? The client copy completed with all the tables ?
You can try Remote client copy method .
You can manually export the variants from the source client to Target client and you need to export the Variants from the table VARID, VARI, VARIT and VARIS.
You can use the below forum procedure to export and import variants.
how to export RFC destination to file in order to import it in an other sys
Since, not only the variants you are missing data and Objects, I would suggest for re-copy the client.
Regards,
Arjun

Logical System Conversion after system refresh failed

Hello,
Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
02/18/2009 16:09:33 Job started                                                                     00           516          S
02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD)      00           550          S
02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system                                  PO           349          I
02/18/2009 16:10:19 Job finished                                                                    00           517          S
When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
Any suggestions on this?
Thanks,
Mahesh

Hi ,
Rerun the BDLS again as this took very little time.
When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
Thanks.

SAP License issue after system refresh.

Hi,
After system refresh, refreshed system has License info of source system. When trying to apply license from unix, it gives below error, saying system number is incorrect to apply new license. Looks the system number of source system is causing issue. I checked, there is no data in MLICHECK table. I could see some info in "saplikey" table. System is 700 system.
sidadm> saplikey -install "/home/SID/sid_multiple.txt pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS01_sapsidci
This system's system number is "000000000710287641", but there is a license key
for system number "000000000711311441" in file "/home/SID/sid_multiple.txt".
sidadm>
Thanks.

First check whether you have deleted all invalid licenses?
use below command to delete invalid licenses
sidadm>saplicense -delete
And apply new license based on new hardwarekey with below command
sidadm>saplicense -install
*I think there should be some invalid licenses lying in your system
Regards
Nick Loy

A very important question for every After Effects user

a very important question for every After Effects user, from product manager Steve Forde:
http://adobe.ly/1exI6tI

Tom Daigon Great idea everybody! Encourage Adobe to do ONLY ONE THING with AE for 2014. Since theres not a heck of a lot of development that can be done on the present foundation, they can really stretch the rental scheme out for many years.And once you get used to the concept, every year they will do ONE THING to placate you. So now they have you swallowing no "ownership" of software and limited development.

Adding transports to import queue after System Refresh

Hello All,
Every time we do system refresh from PRD to Sandbox as a part of post refresh activity we need to import all the transports which are in the import queue of PRD(which are not yet imported to PRD) to our Sandbox.
But its a tedious job, as in the import queue many old transports which are still not yet imported to PRD will b there.
So may b around 150+ transport requests in the import queue of PRD, which we need to add those manually from path
Extras---->other requests -
> Add. doing same for 150 times. cant even imagine dat work.
So my question is, Is there any way to get the replica of import queue of PRD to Sandbox.
Some where i read like transport buffer in the path /usr/sap/trans/buffer/<SID> of the system will have list of all transports in the import queue.
So can i copy dat file and replace SID with Sandbox SID and place it in the Sandbox under same path.
Please suggest or give me a correct solution.
Regards,
Ravi

Thanks a lot for your reply.
I had read about using script like tp addtobuffer inorder to add the transports to the import queue some time back.
But forwarding transports is a new method i got to know here which even looks easy too. It would be great if any 1 tell me how forwarding works.
Also it would b fine if who all uses this method of forwarding to add transports to import queue do reply about any problems faced while forwarding requests.
Bcoz in our landscape , transport route is as below
Dev to QA and Sandbox then from QA transports will move to Production.
So after refresh forwarding Transports from PRD to Sandbox, how does this work. Please share your suggestions.
Regards,
Ravi

False backup / archive alerts after system refresh

We have implemented CCMS on our systems. We recently refreshed our QTS system with a backup of production (PTD). CCMS is now sending alerts for backups and archives. It tells us that the backup and archive did never run.
I checked DB12 and found that there is no data in DB12. This is probably due to the system refresh.
Is there any extra post refresh step that we can do to prevent these false alerts (other than running a full online backup as post refresh step)? Is it possible to export the backup information (tables used by DB12) as pre refresh step and re-import them after the refresh?

Kevin DK wrote:
Will it create issues if we do not delete tables SDBAH and SDBAD during the refresh?
No. BTW, tables are not to be deleted, just the table 'entries'.
Thanks

Source System Problem after system refresh in RSA1 trx

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi
Need to restore the All Dalaload connection settings after refresh the system which either R/3 or SCM.
RSA1 -> select the Source system -> Right click -> Restore , It'll ask the connecon paramters like RFC , method of activations. Then check the connection test of the Source system .
Check the the note for further info...
Note 886102 - System Landscape Copy for SAP BW and NW BI
Hope halp you...
Regards,
Sureshram

Source System Problem after System Refresh

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi Chintan,
Can you please check IDOC in your Target system. It should be the same type. Better you do the Partner profile steps.
Also please check have correctly created the idoc in Inbound or Outbound.
Consider the case like if its exist in BW as Out bound then its connected to Inbound IDOC of R/3 and vice a versa.
Please elaborate your refresh activites. Normally IDOC setting never get changed in you refresh activites.
Just check your BW system patch level and search for Notes.
Regards,
Mahesh

SDCCN settings after system refresh

Hi,
I am planning to refresh my TST system with PRD.
For post system refresh activates, what I have to do for SDCCN settings.
So that EWA will generate automatically.
Kindly advice.
Our environment Windows 2003, Oracle 10g2 and Netweaver 7.01
Best Regards
Satya

Hi Satya,
Once you finish the QAS refresh then login to Solution and perrun a "managed system configutation wizard " and make sure to activate EWA.
After you finish the above said wizards sucessfully then schedule EWA under "EarlyWatch Alert Management" (SOlman SP10).
I'm sure this would assistance you to enable EWA in QAS .
Regards
Mani

Backup of background jobs after system refresh

Hi All,
I want to know that during the system refresh how can we take the backup of the background jobs which are in "Released" state so that we can schedule them the same way after the refresh is done. Presently we are taking the screen shot of "start condition" and "step" of each and every job and then using those screenshots we are scheduling them again after the refresh is completed. It would be really helpful and time saving for us if we come to know the tables where this information is stored and also if there is any other easier way for this.
Regards,
Lovneesh

Hello,
Check the below thread. It mentions all the tables that contain batch job information.
https://scn.sap.com/thread/1709175
" Check below mentioned tables
BTCCTL,
BTCDELAY
BTCEVTJOB
BTCH1000
BTCH1010
TBTCO
TBTCP
These have all the information you need regarding background jobs, you may export these tables at the source and import them "
Check and provide feedback.
Regards,
Mudasir

Large numbers of workflows appearing in SAP Inbox after system refresh

Hi all,
We are having an odd issue where after we perform a system refresh of our PR system to QA, a massive number of Business 23,000+ appear in the SAP Inbox of certain users who are registered as agents.
We understand how to delete the workflows but want to understand the process of why they keep appearing, and whether this is a system error or a symptom of a user/batch process during or after the refresh. The workflows do NOT appear for these users in the PR system.
95% of the notifications are flagged "Error when generating IDoc from MC Document."
I have been reviewing the Workflow wiki but have yet to find anything pertinent yet.
http://wiki.sdn.sap.com/wiki/display/HOME/3.Administrationand+Troubleshooting
Any help with this or applicable SAP Notes would be greatly appreciated.
Thanks!
Edited by: Ben Daniels on Dec 6, 2010 11:21 AM

Hi,
As the error message, those workitems are generated when system trying to generate IDocs.
And the reasons why all workitems are sent to all users is, the task is marked as general task.
What i would suggest is, select any of those workitem, go to its workflow log & analyze which workflow generates these workitems in what case and proceed accordingly.
Regards,
Raj

Delta Setup/Link Broke After System Refresh in Sandbox with Prod

Hi All,
   We have done the System Refresh for Sandbox with Production in BW. After that, we tried to load 0FI_GL_4 Delta and it failed with 'Queue 0FI_GL_4 is not available in the Source System' in Monitor. It means something went wrong in System Refresh process and the Delta setup broke. The 'Status' traffic light for 0FI_GL_4 DataSource is in RED in 'BW Delta Queue Maintenance' (RSA7) in R/3 system. When I display this Status (Red traffic light) it says 'There are still no parameters available for the delta transfer'.
   Since the Delta link broke, I have deleted the 0VENDOR_ATTR Master Data DataSource in RSA7 in R/3 and Initialized the Delta in BW for this 0VENDOR_ATTR and it completed successfully and now 0VENDOR_ATTR Master Data DataSource in RSA7 in R/3 is in GREEN.
   But, we have GL InfoCube which has 120 million records and if we initialize the Delta it will take atleast 7-10 days. It will take atleast 2 weeks for all the InfoCubes and ODS's.
How could we restore the Delta setup/link and the Status of the DataSources will turn into GREEN in RSA7 in R/3, PLEASE ?
Thanks in advance.

Hi,
Ask your BASIS team to run BDLS. That should take care of the problem. It'll repoint the delta queues to the correct source system. With the refesh the delta DS will point to the system it was refreshed from, hence the problem.
Cheers,
Kedar

Java Dispatcher Down but Server0 and SDM up after system refresh

Hello,
I have done system refresh from PRD to QAS of CRM system - dual stack.Once after the system refresh ABAP is up and running fine but Java is down (Only Dispatcher is down. Both SDM and Server0 are running fine).
I have followed Note 609603 - Problems with Multiple NICs and SAP J2EE Engine and have given the correct host name but the no luck..
std_dispatcher.out says the following error:
Cannot attach to the Message Server. Can't open port [3925] on host [<Source Host Name>/Source IP Address].
Could you please let me know if I need to do any changes in the Config tool?
Thanks,
Subbu

HI,
IN DB restore the hostname of java system stored in profiles would be your PRD.
Go to Configtool in Edit mode -- cluster --> change the hostnames in Instance profile -- and under other files like bootstrap etc whereever you find PRD hostname.
And otherwise for JAVA system you should use export/import option.
Regards,
Tajinder

Restore SECSTORE security store after system refresh?

When we refresh a QA system from PRD, we first export the RFCDES table from QA, then perform the homogeneous system copy from PRD -> QA, and then import the RFCDES table we saved prior to the copy. This restores the various RFC destinations in the QA environment.
In recent releases, the password information has been moved out of the RFCDES table into the Secure Store; it looks like this is based on tables RSECTAB and RSECACTB. However, when we transport the contents of these tables and then bring them in again after the refresh, the RFC destination passwords are still marked invalid.
Has anyone refreshed a QA system while saving the RFC destinations, using the secure store? If so, how?
Thanks,
Rich

Hi ,
As an initial check , please check for error/informaiton on Kernel.
OSS notes 816861 & 522536 will help you.
Regards
Nagaraju

Question for RSSM_OLTP_INIT_DELTA_UPDATE after system refresh

Similar Messages

Maybe you are looking for