Question for Shane about Excel file

Hi Shane,
I was reading one of your blogs, and you mentioned that larry jordan has an excel file for timecode? Can you please give me the link where I can find that? I couldn't find it on his site.
Thanks...

Don't worry, I found it on his site, under Goodies...
Thanks though !

Similar Messages

I need format for data in excel file load into info cube to planning area.

Hi gurus,
I need format for data in excel file load into info cube to planning area.
can you send me what should i maintain header
i have knowledge on like
plant,location,customer,product,history qty,calander
100,delhi,suresh,nokia,250,2011211
if it is right or wrong can u explain and send me about excel file format.
babu

Hi Babu,
The file format should be same as you want to upload. The sequence of File format should be same communication structure.
Like,
Initial columns with Characteristics (ex: plant,location,customer,product)
date column (check for data format) (ex: calander)
Last columsn with Key figures (history qty)
Hope this helps.
Regards,
Nawanit

Understand further about "excel files is locked for editting by me"

Hi friends. I hope you are doing well.
i have a problem with an user in my office when opening an excel file from Server:
“<file_name>.xlsx is locked for editing” . The error shows that it is being used by its own user and that user could not open this file.
- Our company is domain network and our Domain Controller is also File Servers.
* I got a workaround action plan is: "unshared the folder which contains the problematic files in server, then share it again". However, this only works with folders which contain a small volume of data. For several GB it will take a considerable
time and affect to network availability.
I have few questions:
1. Is there anyway to kill the process/service which is controlling the "excel files" at server ? ( Since i reboot client machine but the error message still persists), beside my workaround action plan.
2.When i use OpenFilesView (from the link: http://www.nirsoft.net/utils/opened_files_view.html) i can see that the excel files is opened by 2 process : "xlsx and xls" from remote computer. However, i can not kill the process using OpenFilesView.
So i would like to ask: Is there any way to kill a process from remote host?
3. What actually happens when sharing a files from Server in domain ? ( mechanism of sharing files)
I would appreciate if you can give me some advices for my concern.
Thank you very much! Have a good day.

Hi,
We have a lot of possible causes for this error, I would suggest your to take a look at this public blog and try the steps out there:
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2012/05/14/the-definitive-locked-file-post.aspx
Also, below KB article describes the way that how Excel saves files, you might also want to take a look. There may be some softwares or process is accessing these temporary files. Check if there is any temporary file (~$filename.xls
or ~$filename.xlsx) in the shared folder, delete them and try again.
http://support.microsoft.com/kb/814068/en-us
Hope this helps.
Thanks,
Ethan Hua CHN
TechNet Community Support

Wht are the function modules for download upload excel files in bdc.

hi all,
this question seems to be silly but i had open office excel files i am getting problems to upload or down loading. can you tell which function modules can upload or down load open office excel files.
another dought this is not need full but i need to get some of graphics which are in se78 .
how can we dowload them from sap.
thanq,
rajesh.k

Hi,
use :   CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
   REPORT YKC_XL_UPLOAD.
TYPE-POOLS TRUXS.
TABLES : ZMARA.
* Selection screen
PARAMETER P_FILE TYPE RLGRAP-FILENAME DEFAULT
'C:\Kris\TEST_UPLOAD.xls'.
TYPES: BEGIN OF T_TAB,
        MATNR   LIKE ZMARA-MATNR,
        ERSDA LIKE ZMARA-ERSDA,
        ERNAM LIKE ZMARA-ERNAM,
        END OF T_TAB.
DATA : T_UPLOAD TYPE STANDARD TABLE OF T_TAB WITH HEADER LINE ,
        WA_UPLOAD TYPE T_TAB,
        IT_RAW TYPE TRUXS_T_TEXT_DATA. "work table internal table
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = 'P_FILE '
    IMPORTING
      FILE_NAME     = P_FILE.
START-OF-SELECTION.
* Uploading the data in the file into internal table
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
*   I_FIELD_SEPERATOR =
*   I_LINE_HEADER = 'X'
    I_TAB_RAW_DATA = IT_RAW
    I_FILENAME     = P_FILE
TABLES
    I_TAB_CONVERTED_DATA = T_UPLOAD[]
EXCEPTIONS
    CONVERSION_FAILED = 1
    OTHERS            = 2.
IF SY-SUBRC NE 0.
    MESSAGE ID SY-MSGID
            TYPE SY-MSGTY
            NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END-OF-SELECTION.
* Uploading the data into the database table
LOOP AT T_UPLOAD INTO T_UPLOAD.
    ZMARA-MATNR = T_UPLOAD-MATNR.
    ZMARA-ERSDA = T_UPLOAD-ERSDA.
    ZMARA-ERNAM = T_UPLOAD-ERNAM.
    INSERT ZMARA.
Endloop.
Tks,
Krishna

Help for writing to excel file from Java Program

Hi,
I am new to Java and Java API. I need to write to some specific cells of an excel file from a Java Program. Please anyone help me or give some directions.
Thanks,
Reet

Hi,
I saw an example while searching in google about importing jxl.*. Could you direct me how I can import this package as java does not have it. I heard that jxl is much easier that POI although I am not new to both of them.
Thanks,
Priya

A command for opening an excel file

Is there any way, or method I can call, when a button in my GUI is pressed, to open an excel file ??
Thanks,
Seanie

Look at Runtime.exec(), but read this first (and understand it, of course): When Runtime.exec() won't: Navigate yourself around pitfalls related to the Runtime.exec() method

Question for active X excel experts

My question is this how do I create multiple charts on the same page using Labview? Please look at my program to get a better idea of what I like to do. Basically I have 2-D array of clusters of 4 elements (Y1, Y2, X1, X2), which define the range of the plot. Each row in the 2-D array has 2 clusters which will be plotted as series 1 and series 2 on a plot. I am indexing that two dimention array to creat multiple plots, each of which contains two series/graphs.
JC
Attachments:
Excel New XY Chart21.vi ‏123 KB
snapshot41.jpg ‏3788 KB

Hi joeycao,
To get a general idea of which sequence of commands you'll need to use to create these charts and configure them as you like, your best bet is to record a macro in Excel, doing the steps, and then later examine which are used. You'll then be able to use invoke nodes to make these ActiveX calls in the proper sequence.
Please refer to this knowledgebase, Using National Instruments Software to Control Microsoft Excel with ActiveX
for a description of how to do this.
Hopefully that gets you started on the right path.
-Sam F, DAQ Marketing Manager
Learn about measuring temperature
Learn how to take voltage measurements
Learn how to measure current

Kona DVCPro HD to HDCAM Cross-Convert Question for Shane Ross

Hi Shane (Or anyone else whose done this)... Shane posted the comment below at Creative Cow Oct'06:
Quoting Shane: "...because with FCP I can capture DVCPRO HD 720p 23.98 and edit at full resolution. When I lock picture I can, with the use of a Kona 3, cross convert to 1080p 23.98 via the hardware and output to HDCAM."
GREAT! I want to mimic this workflow!!! I have a completed project that was edited as above in FCP (based on your creative cow video tutorial). I shot with the HVX200.
1. Are you happy with the cross-converted 960X720 DVCPro HD footage to 1080p 23.98 quality? I'm assuming this is 1920X1080...
1b. Why not 1280X720? The original .mxf. Seems like that would provide better resolution . What am i missing?
2. Any Artifacting/aliasing? How did titles and transitions hold up? Did the reds bleed?
3. Are there any new advances that you've come across that i should look into as well?
4. And, can you be more specific about how you did question # 1. What codec; Does it come with the card or is it in FCP? What VTR do you suggest?
5. Can i do the above with a BlackMagic card? Which one?
6. What am i forgetting to ask?
Big fan, your posts have saved me hours of headaches over the last 5 months. Cheers...
Hayden
Mac Pro 2.66, 2GB ram, 250GB system, 1TB internal raid, ATI x1900xt and NVidia 7300GT Mac OS X (10.4.8)
Mac Pro 2.66, 2GB ram, 250GB system, 1TB internal raid, ATI x1900xt and NVidia 7300GT Mac OS X (10.4.8)

1. Are you happy with the cross-converted 960X720 DVCPro HD footage to 1080p 23.98 quality? I'm assuming this is 1920X1080...
Absolutely. It looks great. But, this is HDCAM, so it is anamorphic HD...1440x1080. Since DVCPRO HD is anamorphic as well...it all works out.
1b. Why not 1280X720? The original .mxf. Seems like that would provide better resolution . What am i missing?
The network delivery specs require a 1080p 23.98 master on HDCAM or D5. They chose that because you can convert that into anything.
2. Any Artifacting/aliasing? How did titles and transitions hold up? Did the reds bleed?
No artifacting or aliasing whatsoever. Titles and transitions all held up. No bleeding in the reds.
3. Are there any new advances that you've come across that i should look into as well?
ProRES...that will come with FCP 6. I'll be playing with that codec when I get my hands on it.
4. And, can you be more specific about how you did question # 1. What codec; Does it come with the card or is it in FCP? What VTR do you suggest?
It was really VERY simple. The Kona 3 has an option in the Kona control panel to cross convert 720p to 1080p. We chose that. Then we blacked the first 3 min of the tape, then used EDIT TO TAPE to output. The card did everything. Not sure about the model of the VTR...it was the Sony HDCAM deck (not HDCAM SR).
5. Can i do the above with a BlackMagic card? Which one?
I don't know if any of the Blackmagic cards can cross convert. You'll have to ask them.
6. What am i forgetting to ask?
Where you can send the check for all the workflow advice I am giving to you (and everyone)
Also, how did we deal with our downconverted masters we were also required to deliver. While the network wants an HD master, they don't air HD. They air in SD from a digitbeta master. We had to do a separate output to digibeta with all the graphics properly sized for letterbox output.
Shane

A question for document about 10.2.0.4 on Windows Server 2008

Hi
This link - http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b14264/toc.htm#BAB - describes how to install Oracle Database on Windows Vista and Windows Server 2008.
But I have a question about this document.
According to the document, the first step is "Install Oracle Database using the 10.2.0.3 media."
But I don't know which 10.2.0.3 media I should use. Is it this one?
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html
Thanks.

Hi all
There are some patches for oracle 10.2.0.3. After I installed 10.2.0.3, I should apply these patches, such as p5746875_10203_GENERIC.zip, p5846376_10203_WINNT.zip, p5916257_10203_WINNT.zip.
My question is: should I apply these patches before I install 10.2.0.4 on Windows Server 2008?
Usually I think these patches for 10.2.0.3 should be integrated into 10.2.0.4, so I don't need to apply these patches, just install 10.2.0.4.
But after I installed 10.2.0.4, I use opatch command to check the patches, I didn't find these patches included in 10.2.0.4. Also I didn't find these patches in 10.2.0.4 patch list...
Is there anyone can help me? Thanks!

Question for David Powers re file 'quotations.sql'

It would appear from the first few lines of this file (shown
below) that it
first checks if a table "quotations" already exists, and if
so deletes it. Then
it creates a new version, and populates it with the following
data.
Is this correct?
Clancy
-- Table structure for table `quotations`
DROP TABLE IF EXISTS `quotations`;
CREATE TABLE `quotations` (
`quote_id` int(10) unsigned NOT NULL auto_increment,
`quotation` varchar(255) NOT NULL default '',
`first_name` varchar(30) NOT NULL default '',
`family_name` varchar(30) NOT NULL default '',
PRIMARY KEY (`quote_id`)
) ENGINE=MyISAM DEFAULT CHARSET=latin1;
-- Dumping data for table `quotations`
INSERT INTO `quotations` VALUES (1, 'My disability is ......'
Clancy

Clancy wrote:
> I thought so. As the sql file redefines the table, is it
necessary to define
> the table at all before running the file?
The purpose of the preceding section is to teach you how to
define a
table. If all you're interested in is copying my table
structure, feel
free to do so. However, I believe in the principle of
teaching a man to
fish, rather than giving a man a fish.
> I have been thinking about how to set up a database for
my photo album, and
> wondering how to order it. If I have a text file, like
'quotations.sql', it
> looks as if the easiest way to change the order of the
photos is to swap the
> lines in the text file, and then reload the whole
database.
If that's your conclusion, then I'm afraid that you have
failed to
understand the fundamental principles of how a database
works. The order
in which records are entered is totally irrelevant. You use
SQL to
display them in whichever order you require.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Question for romko23 about getting A.S.D

                         Hello i am ,romko 23 told me to contact him about apple asd for my powermac g5 early 2005 dual 2.7.I replaced my processors and overhauled my l.q.s but now i was told i need the apple asd.How could i get a copy of your asd ?
                                                                                                               Thank You,
                                                                                                                   connet123896

Here I am! Given the length and size of this file I will be unable to send it via email.. Leave me your email and I can see what I can do.
Romko.

Question for BDC about tcode VK12

Hi, everyone, i encounter a problem when i use BDC to transfer data about vk12.
when i usd BDC to transfer value to the field F001,F002, F003 and F004-LOW then click run, the detail record are be chosed and displayed, then i must chose them and click delete. if there is only one record accord to the condition, it is easy to deal with it, but, if there are more than one record, what should i do the deal with the detail records, especially how to deal with it dynamicly acoording to the condition.
for example:
when i enter first condition through BDC .(see the first record)
ZPR0|X||RENT-L1-M03||100001||1000|00|01.01.2008|
the condition value are: zpro, x , rent-l1-m03, 100001,1000, 00 ,01.01.2008 and then i will find only detail record according to this condition, it like this:
RENT-L1-M03
2,000.12
sgd
1
ea
01.01.2008
31.12.9999
then flag this detail record and click delete.it is successful
when i enter second condition through BDC .(see the second record)
ZPR0
X
RENT-L1-M00
100021
1000
00
01.01.2008
the condition value are: zpro, x , rent-l1-m00, 100021,1000, 00 ,01.01.2008 and then i will find three detail records according to this condition, like this:
|RENT-L1-M00|2,000.12|sgd|1|ea|01.01.2008|31.12.9999
|RENT-L1-M00|2,000|sgd|1|ea|01.01.2008|31.12.9999
|RENT-L1-M00|1,000|sgd|1|ea|01.01.2008|31.12.9999
then if i use the same BDC record program to deal with this detail record, it is deal with only one detail record, so what should i do to deal with the others.(because all of them should be flaged and deleted)

Just check if you have a Select All button when you select the record you want to delete.

Question for Turingtest2 about previous instructions

Hi Turingtest2,
I tried to follow your instructions to another poster about linking a new computer to an iTunes library on an external hard drive. Unfortunately, I've done something wrong and now neither old or new computer will link to the library. All my files are still on the external hard drive, but I cannot get either computer to link to them! I'm not very good with computers, and I'm very frustrated (as I've spent 3 hrs on this). Can you please try to walk me through reconnecting to my external hard drive files? I am using Windows 7 on the new computer.

I recently had an eye examination done, and it came back perfect. This is the previous monitor I used: http://www.walmart.com/ip/AOC-931SWL/13890785
I get that it's completely different, but it didn't cause me any eye strain at all. I also tried calibrating the color, right now it's really warm, with less blue LEDs, and it's easy on the eyes, but it's definitely, still a problem.
I know that some people don't have any problem with them at all, but some others are having the same issue, but I am just trying to figure out if what Apple has done with the change in the new iMac is their solution to the problem.

4 simple questions(I guess) about audio files in FCP X.

Hello,please help me.
1) Is it appropriate to import my audio files from "Music and Sound Browser" tab into FCPX) or its a better idea to arrange all Audio files
what I am going to use in a folder and then import from finder window?
2)Is it possible to drag and drop music tracks from "Music and Sound Browser " tab to Event Browser without put the audio
in sequence?how?
3)How to import a part of a music / soundtrack? (Can I mark in / out BEFORE I drag to timeline)? I mean,set IN / OUT directly from
Music and Sound Browser" tab.
4)How to connect music / sounds what I have in "Music and Sound Browser" tab TO connected clips (NOT to primary story line clips)?
thank you

Actually, you can have music from the Media Browser edit any way you want into a Timeline: either to a Storyline, or be a Connected Clip, or do an Insert Edit. Highlight the song, click the desired Edit button. Keyboard shortcuts don't work for this.
Drag-and-drop any selection for the Media Browser to an Event. It will COPY that audio file into your Event folder, so you'll now have two physical copies. One in iTunes/sound library, one in your Event folder.

Easy questions for Pro about ASM block size

hi
how can we change DB_BLOCK_SIZE in ASM (while instalation)
we have a default of 4096

As for databases 'later' is not possible. I'm not sure what happens when you choose another blocksize at creation time. ASM blocksize is only for metadata,it's not related to the actual database data (having the database blocksize) stored in ASM diskgroups.
These are the blocks which are used for extent maps in shared pool.o you dont need to worry about this blocksize difference.
here is the actul link that i copied over from(above)
ASM instance's block size

Question for Shane about Excel file

Similar Messages

Maybe you are looking for