Question for the masses regarding hard of hearing

All,
I have a new employee who is partially deaf. This user requires a telephone on my CUCM/IPCC system to take calls for our servicedesk. Here is my challenge that I was hoping some of you might have already faced and solved and be able to give me some advice. The employee who is partially deaf has a hearing aid that has bluetooth capability. A headset is not an option as the hearing aid has feedback if it is covered up with a headset.
Per some of my research - the only phones I have found that are offered from Cisco that support bluetooth are for the 500 series small business system and then the 7925 series wireless phones. Both are not options for me here. Are any of you aware of headset devices that have bluetooth capability that would work with a Cisco 794X phone and that would pair with a bluetooth hearing aid?
I welcome any insight or input you might have.
Thanks.

Hi,
The Cisco 9951 and 9971 IP phones support Bluetooth for headset connections and so may be an option if you are running a version of CUCM that supports them.
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps10453/ps10513/data_sheet_c78-565680.html

Similar Messages

  • Question for the future..

    ...is it planned to enable Question for the future..
    Is it planned to enable Smartphone/PDA software to use Adobe3D futures.
    I think it is an essential question for travel engineering buiseness. 
    Regards
    Lars

    Hi,
    My 5 years old computer works with only a minor problem but is has been fixed therefore I expect a 3 yrs old computer should work, but who knows !
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Choosing proper CoDecs for the masses?

    Here is a website that serves up QT movies of a specific person's commercial film work: http://www.sprocketfuel.com/2007/reel.html
    For some reason, the Fast Start QT movies created for this site are not working very smoothly... it almost seems that the computer will play the beginning of the QT movie, and then catch up to the download, and re-set, only to begin playing from the beginning again.
    These movies are only :30-:60 seconds in length, and only 4Meg to 8Meg in size... it doesn't seem like they should be so troubled!
    They were exported as Fast Start movies from QT Pro 6, using Sorensen 3, High (not Best) Quality and 22K stereo audio.
    In the past, we have had pretty good luck with that, but now they seem to be acting quirky.
    Should I choose a different codec? Make them even smaller? What is a good rule of thumb to make them play smoothly for the masses?
    PC Windows XP Pro Fast. Very Fast.
    PC   Windows XP Pro   Fast. Very Fast.

    Hmmm...
    I don't know if I just answered my own question, but I went ahead and did the JavaScript updates for the Windows IE fix... and it seems to have improved things dramatically. Who'da thunk it? I only use FireFox, so I didn't think that would affect my experience, nor could I understand why the JS fix would help either... but something triggered and it works a lot better for me now.
    Any webmeisters that haven't yet changed their OBJECT and EMBED coding, I highly advise that you do! Very weird, but it seems to work well.
    I was sure my problems were from odd codecs, slow servers, or funky computers... but it seems to have been a Microsoft "update" that killed the established way of doing things.
    Fargin' Microsoft!
    PC Windows XP Pro Fast. Very Fast.

  • Question for T20 owners regarding aux input

    I'm hoping someone with T20s can answer a simple question for me. When you have two different sources plugged into the main input and the aux input, do you hear both mixed together? Or, does plugging in the aux "cut off" the main input? I've got two computers and I'd like to pipe both into just one set of speakers, and I've heard using reverse splitter adapters is a bad idea. All help is appreciated. Thanks! :-)

    I'm not an audio expert but here goes. The aux does not cut off the primary input for the speaker, and you can hear both sources at once. (I have my laptop plugged into the rear and an MP3 player feeding the aux input)? I don't know that it's really a great idea since you could probably overload the speakers quickly if both sources are playing, even with transient spikes, but if you keep the volume reasonable, it probably may work fine. Best of luck.

  • Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

    Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

    Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
    Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
    See http://www.alsoft.com/diskwarrior/

  • I have a new email address and my old email keeps coming up on icloud when trying to update apps and i don't know the password or security questions for the old email. I can sign in with my apple id which is tied to another email but not itunes how to fix

    I have an apple id and it has my current email attached to it. however when i go to update apps it's asking for the password for an old email. I no longer have the old email and can't use it. when I go to icloud on my ipad it asks for the password for old email. it doesn't allow me to change the old email to current. when i go to reset it i can't remember the password or security questions for the old email so it doesn't let me go any further. How do I fix this? Do i need to call apple support?

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.   When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and

    Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
    When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
    I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
    However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
    So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
    Can I fully change the name without doing a complete re-install of Lion and all my apps?

    One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.

  • I have created a .png logo to use on my video. It has it's own storyline so the logo is shown overthe whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

    Final Cut Pro 10.0.8
    I have created a .png logo to use on my video. It has it's own storyline so the logo is shown over the whole video. Do I need to composite the logo storyline to the main storyline before exporting? Same question for the audio storyline.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar
    The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
    Thus, if you get it to work restore to factory settings/new iPod, not from backup                               
    You can redownload most iTunes purchases by:        
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Questions for the end users in Building an application.

    Questions for the end users in Building an application.
    Hello,
    I am assigned a project in building a CF application. As far
    as the business requirements, I have an idea from the MIS people.
    However, I have a meeting with direct users and I have to ask
    questions to add to my requirements. I am still a beginner in this
    but I need to ask questions.
    Can anyone give me tips? what basic / important questions?

    For starters,
    DO:
    Ask them to discuss what they want to do with the application
    Try to understand their level of computer literacy
    Keep your conversation non-technical
    Continue to interact with the users during the design and
    development process
    Try to identify a "champion" with whom you can interface as the
    project progresses
    DON'T:
    Use technical terms or discuss technical issues
    Talk down to them
    Promise delivery dates until you have documented their
    requirements and they have approved them

  • I have a question for the Adobe customer service dept., not for the "community" as a whole!

    I have a question for the Adobe Customer Serice Dept., not the "community" as a whole. And I expect an answer! I want to know why I am expected to sign up for another service package when I just paid $25+ yesterday to be able to convert files back and forth from a PDF to a Word file and then back to a PDF. What kind of rip-off is this?

    Hi,
    I am very sorry that you had unpleasant experiences with our customer service.
    If you would like to export your PDF files to MS Word files then ExportPDF tool will do the job.
    If you would like to convert MS Word files to PDF then ConvertPDF tool will the the job.
    If you would like to export your PDF files to Word file then convert the Word files back to PDF then PDF Pack service is required which includes ExportPDF/Convert to PDF/Combine Files tools.
    Please let me know if you have any questions/issues.
    Thank you.
    Hisami

  • I having problem with the answer  question for the App Store. And I forgot the answer

    I having problem with the answer  question for the App Store. And I forgot the answer

    Pleae call 1800MYAPPLE ask to speak to account security

  • Questions for the october release

    Hey there,
    two questions for the october release update:
    1. We often use filmconvert in our workflow. Is it possible to send a sequence via Direct Link to SpeedGrade and keep and see the effect?
    2. Can I send  a sequence with some AfterEffects Dynamic Link pieces in it to SpeedGrade to grade the project or will the connection get lost?
    Thanks for your help
    Jesko

    All effects should come over.  No mention about Linked comps, though.
    http://tv.adobe.com/watch/adobe-at-ibc-2013/adobe-speedgrade-cc-october-2013-release-overv iew/

  • HT201303 I hot Remember the questions for the confirmation of the Apple store

    I not Remember the questions for the confirmation of the Apple store and I can make purcheses

    If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address set up then go to Express Lane  and select 'iTunes' from the list of 'products' in the middle of the screen.
    Then select 'iTunes Store', and on the next screen select 'Account Management'
    Next choose 'iTunes Store Account Questions' and fill in that you'd like your security questions/answers reset.
    You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox)

  • My account asks me to change my password every week for no reason and i have different security questions for the same account

    My account asks me to change my password every week for no reason and i have different security questions for the same account

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Try changing the security on the router. Start with no securty as a test.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • ? for the experts regarding the HP Pavilion dv7t Quad Edition (with the new Sandy Bridge CPU's)

    Hello,
    This is a question for the experts.
    The HP Pavilion dv7t Quad Edition has the following GPU:
    1GB ATI Mobility Radeon(TM) HD 6570 graphics
    Is this GPU GDDR5 or DDR3 in this laptop?  I know someone that purchased one from a MicroCenter and it shows GDDR5 on the packaging (http://www.flickr.com/photos/bravoexo/5298674802/) and in GPU-Z, but I called HP support and they said it was DDR3 (although, HP support told me that GDDR5 didn't exist and that DDR3 in GPU's were the most advanced to this date).
    Please let me know ASAP, as this is a main factor in me purchasing this or not.  I can find other DDR3 gaming laptops out there for less, but if this really IS GDDR5, then I'm sold.

    Thank you both for your questions and answers, I was wondering the exact same thing. I'm ashamed to admit I already began the process of perchasing this computer prior to having all detailed specifications made available.
    I'm upgrading from a 13.3 inch HP laptop called the dv3510nr. It was never intended for enthuiast gaming, but it has exceeded the sum of its parts. It does have dedicated graphics, backlit keyboard, other novelties that make it the best computer I've personally ever owned.
    Few people can say they've managed to run Fallout 3 or Supreme Commander at maximum detail on a 9300M GS. It has 512 MB of DDR2 memory, 4 GB system memory and a 25W P7350 Core 2 Duo processor (2.0 GHz)
    Its served me well but mobility is no longer a priority. I waited until Sandy Bridge was announced and took the plunge immediately. 6 GB of DDR3 RAM, a 6570 with 1 GB, 1600 x 900 display AND best of all:
    -The i7-2720 quad core processor, (2.2 GHz, up to 3.3 GHz with Turbo Boost)
    --for a total price of just over $1,000 after taxes. With 2 year warranty standard.
    For brand new, bleeding edge technology not yet even widely available, at such a large upgrade margin at an absurdly low price; I didn't need to know anything else.
    So imagine my excitement when I learned this 6570 was in fact based on the old 5770 (the lowest available card with GDDR5 support), not the 5650; and could contain a 1 full GB of the fastest memory technology on the market, GDDR5.
    That would mean virtually no bottlenecks in my system as a whole; I don't have an SSD but truth is, I don't like them anyway. They don't last very long with 'wear leveling', cost too much and only impact synthetic benchmarks.
    My new DV7 can't get here fast enough.

Maybe you are looking for

  • Adobe Bridge zentrale Bilddatenbank

    Hallo zusammen! In Adobe Bridge habe ich ja bekanntlich die Möglichkeit, Bilder mit Schlagworten zu sortieren, und somit eine struktuierte Bilddatenbank zu erstellen. In unserer Agentur hat sich im Laufe der Zeit eine große Anzahl an Bilder und Grafi

  • How table data is stored in Oracle db?

    Hi, I would like to know the, order in which the data is store in oracle. say for e.g. If I type select * from emp; -- with out order by I get record in some order I would like know the order in which oracle stores the data, say if I insert rec 1, re

  • Pse 7 edited photos

    Hi i have just started using PSE7 and if i use the auto fix feature it make a copy of the photo in the same directory as the original this is ok if there are only 1 or 2 photos to pick out, but its a bit of a pain if there are loaded of photos in the

  • Address print problem - sapscript

    Hello I have a problem with print name for example "Mr &Smith& and &M& company" from field &VBDKR-NAME1&. The output is "Mr and company" sapscript format the name. I use /: ADDRESS PARAGRAPH AS /: ADDRESSNUMBER &VBDKR-ADRNR(K)& /: FROMCOUNTRY &VBDKR-

  • Open session problem.

    I am using 11.1.2.1 Jdeveloper and i have problem with open sessions. I set in appModule pool, min available size: 0 I set in Db Conexion pool, min available size:0 This are the step i am doing to get the problem: - I Clic on search button from input