Question from a new person

i have trial version of adobe flash cs4 and i need help
Im not sure how to do this... so ill tell you all what i did
and see if you can help me
i draw circle.
highlight it alll and make it be a movie symbol
now i want to make code for it and do this
onClipEvent (enterFrame)
if (Key.isDown(Key.LEFT)) {
_root.me._x=(this._x-20)}
but when i have the symbol selected and i hit F9 it says u
cant add actions to this...:(
Where do i go to do this?

you would probably do well to take a introduction to flashCS4
class at
http://www.lynda.com/home/ViewCourses.aspx?lpk0=392

Similar Messages

  • Why can't I post a question from my new system?

    Hello All:
    I was just trying to post a question from my new mbp but it wouldn't allow me to do anything.  It continually gave me a message highlighted in 'red' that i was;t allowed to modify or post anything.  I've been asking questions for quite a while and have never seen this.  I also happen to have my older bmp, also logged onto the 'Apple Discussions' site, open beside me.  Can anyone explain this to me please?  BTW, my new system obviously has Yosemite on it while my older bmp has Lion.  Thanks in advance, to all those who respond.
    Regards,
    Ciaochiao

    ChitlinsCC, I'm adding your reloaders to my article on how to make using ASC easier.
    Here is my ASC work flow...
    1) I login.
    2) Block the automatic 30 minute logout.
         Unless you do something every thirty minutes you get logged out.  The forum software waits to tell you this as long as it can to keep you in suspense  ;-) . Filling out a reply is the exception to the thirty minute window.
            Start an auto reloader.
    Safari = SafariTabReloader
    Firefox = ReloadEvery: "Reload web pages automatically"
    Others = Reloaders | Cerberus - Support Center
      You need to pick a page that will reload over time without stalling out. It's ASC.  I've found my profile display the best to use. I get my Profile page after some  logins.  It's ASC.  Change rccharles to your apple id.
    https://discussions.apple.com/people/rccharles?view=discussions
    Reply technique
    Open a new browser window.  Pick some discussion.  Open a reply window.  As long as this reply window is open, you will stay logged in.  The 30 minute times is reset as needed by the ASC software.
    3) I open another window to do my normal ASC browsing.
    4) I have a FireFox bookmark to goto the discussions that I have participated in. I've modified it to add on the content stuff.
             turingtest2 recommends. Change rccharles to your apple id:  
    https://discussions.apple.com/people/rccharles/content?filterID=participated~obj ecttype~objecttype%5Bthread%5D
    5) Use turingtest2's generated links with the /content suffix as browser bookmark to the ASC discussions: 
    Site map of Communities and Categories
    https://discussions.apple.com/docs/DOC-2463
    6) Adjust the ASC web page layout.
    For FireFox
    I run with Hiroto's modification to user content.  This is the only way these forums are readable for me.  How to adjust the format and layout of ASC Web Pages:
    https://discussions.apple.com/docs/DOC-7501
    For Safari
    "ASCPowerTools is a Safari Extension designed to give more control"
    http://www.etresoft.com/ascpowertools
    7) Read and answer my old posts.  I kind of memorize the time I last posted. ( It's way bad that apple eliminated the last poster to a thread. )
    8) I use tabbed browsering.  From a list of discussions, hold down the command key then click on the link. You get two tabs this way. The original window will keep where you have been.

  • May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

    May be slightly simple question from a new Mac user: Why can't I quit safari? I cannot quit it from top menu bar neither to do it from dock? All other apps are working normally.

    Or you can actived the right button on your magic mouse and click on they icon in the dock. then you select "stop" and it's out of your dock.
    Greetings
    *update: Sorry, my mistake! I didn't read your message correct! Sorry for the inconvience!

  • 2 mail questions from a new apple person

    1. The delightful sound made when i sent mail just up and stopped. How do i get it back?
    2. How do i keep a note in the Notes mailbox without it also being in my Inbox, where i don't want it to be, but when i trash it from the Inbox it also disappears from the Notes mailbox. I want it in 1 place only and that place is the Notes mailbox.

    Thanks a lot you two makes me feel better, Originally I was going to go for the twin but oddly enough they're all sold out of retailers and newegg has them under Discontinued I find it odd, the older 7870 is plenty around and the 7850's/7950's are everywhere but the middle child was abducted or something. (This intially spurred my paranoia that has bothered you guys)
    I think you're spot on about the one extra heat pipe and the metal shroud. That has always been bothering me though why sell two versions at the same time and I thought the difference was something much more critical at first. I can rest easier knowing that its really only a minor difference. The word is that anything below 70's is very good considering the previous generations of cards ran much hotter and produced less but like I said I was just paranoid/ Confused.
    One other question actually, how do you check the vbios? What is the difference between one set and other?
    Once again, thank you both for your input and reply it makes me feel better and its the time that you take out that make me feel assured I was right to go with MSI.

  • Few questions from a new user

    Hi Guys
    I've had my 3gs 16GB for about a week now. I am absolutely loving it, but I have a few questions.
    I am completely new to apple products. I had never used itunes before I bought my phone.
    First question is about the battery. I know this has been greatly discussed and I have searched through the forums and have found just about all of the answers I was looking for, so this is more of a comment than a question. I was a little worried about all the issues people are having with their battery life, so I did a few tests. I am pretty happy with the results. I have the following settings:
    wifi - on
    notifications - on
    brightness - ~40%
    bluetooth - off
    3G - on
    push - off
    fetch data - hourly
    After 48 hours the battery is at 10%. Usage is at 5 hours which included mostly internet browsing on wifi, about 20 sms messages, and about 10 minutes of calls. This is about what I was expecting. The only question I have about the battery is about charging. I am going to charge it daily and once a month fully drain and recharge. I haven't found out if it is ok to leave it plugged in after it has fully charged. Do I need to take it of the charger when it is fully charged, or does the battery shut off and just use the external power source? Ideally I would like to charge before I go to bed and take it off the charger when I wake up.
    Next question is mainly about accessories. I would like a good case that is minimal, but still providing protection from scratches. Are there any good recommendations or is it just kinda personal preference. Also, has anyone tried some of the screen protectors on the market? Can you tell that they are there, or do they give you any problems with the "touch" and "feel" of the screen?
    Thanks

    joshdsalley wrote:
    Hi Guys
    Next question is mainly about accessories. I would like a good case that is minimal, but still providing protection from scratches. Are there any good recommendations or is it just kinda personal preference. Also, has anyone tried some of the screen protectors on the market? Can you tell that they are there, or do they give you any problems with the "touch" and "feel" of the screen?
    Thanks
    I don't use a protective case on my iPhone has I think it spoils the look of it. Instead I have a leather case that provides protection from the screen getting scratched and can be easily taken out when I need to use the iPhone.
    The case I got has a soft velveteen interior which protects the screen from scratches. It wasn't cheap (£25) but it is well made and is lovely soft leather, and you can tell it will last.
    Here's the link to it:
    http://www.knomobags.com/eshop/knomo_product.asp?SS=5&C=84&CA=227&P=394
    I have read though that some screen protectors can interfere with the photo sensors on the iPhone (there the 3 little dots that you can see to the left of the earpiece) whereby the screen will remain on or off when it shouldn't be.

  • A few questions from someone new to Aperture (and DSLR photography)

    Hi - I have just got my first DSLR camera (A Nikon D3000) and am trying out Aperture 3. I had a few questions which aren't all just necessarily Aperture related:
    I have imported my library from iPhoto, however now all my albums are in alphabetical order, rather than date created. I only seem to have the option to arrange my albums by, "Kind", "Name" or "Manual". Any idea how I restore the date created order?
    This may be too large a subject for here (I should probably buy a book on the subject), however JPEG, NEF and TIFF - I am shooting in raw mode which is generating NEF files. I had tried RAW+JPEG, but the basic JPEG this creates is really quite poor. The NEF files are generally around 7-12Mb. If I open them for editing in Photoshop, a TIFF file is generated in Aperture which looks to be over 8x the size of the original raw file, sometime over 100Mb. I then seem to be able to save it back as a JPEG at pretty much maximum quality which results in a file slightly smaller than the original raw file. Is it necessary to keep the large TIFF files once I've created a jpeg? Am I best off just keeping the finished jpeg and the original raw file in case I want to make changes?
    When publishing to flickr, It would be good to be able to just publish the latest versions of all photos in an album. ie not the same photo in tiff, nef and jpg format. Is there an easy way to do this, or is it a case of manually picking each one?
    Also - When uploading NEF files to flickr it would appear to convert them to jpg, which is kind of good I suppose, but does anyone know what level of quality the jpegs created are? Am I best off converting them to jpeg myself first and then uploading? If I did this then my albums would be full of duplicates in different formats, which leads back to my previous question about uploading just one version of each. That may be a question for the flickr forum...

    You have jumped into the deep end with both feet.
    With Aperture running select the single the Browser and you will find the sort controls under the Mobileme to New Smart Album icons depending on how stretched out you have the Inspector panel. There is the ability to sort by just about every parameter there either ascending or descending.
    Can Aperture not convert your NEF files? You dont have to have Tiff files at all. See your Preferences regarding External Editor. How much storage space and your archiving requirements will influence your decision about retaining Tiff files.
    I know nothing about Flickr but assume you will have to choose your own images. I doubt a Smart Album can select exactly what you need.
    When uploading files online galleries generally optimise the images. You are wasting your time uploading massive Tiffs IMHO. Most web services work with jpegs I understand. Consult the Flickr help and support for their requirements and advice.
    Enjoy your new hobby.
    AW
    Whether you have the room to save Tiff files as well as Raw files will probably decide whether you keep them or not.

  • A few questions from a new tech...

    It is based on the conversion process of a Cisco 6500 Series switch (WS-Sup720-3B release) w/MSFC3 from a hybrid mode (CatOS/IOS) over to a native mode. I've found a few conversion processes online however, I do not know which process is the best to use (as some of them seem outdated) and detailed enough:
    http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/12031-catos-ios-conversion-6500k.html
    http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/70273-70273.html
    http://www.ciscopress.com/articles/article.asp?p=102093&seqNum=5
    Also, another question that I have is about the correct, most up-to-date software. Whenever I use the Cisco software download navigator to search for an applicable image, I see different images based on various network requirements. Are these images applicable to this process? 
    https://software.cisco.com/download/release.html?mdfid=280829702&flowid=20135&softwareid=280805680&release=15.1.2-SY4a&relind=AVAILABLE&rellifecycle=ED&reltype=latest
    Any help would be very much appreciated.

    It depends on how complicated your configuration is.
    When I did this a long time ago I just did it by hand ie. I didn't use a conversion tool I just created a new configuration in a text editor and then copied in the new configuration.
    A lot of the commands in a configuration are defaults and you don't necessarily need to replicate them because you will get a new set of defaults when you convert.
    If you have a lot of extra configuration eg. QOS then it may be worth using one. It really depends on how well you know what your switch is currently doing.
    In terms of IOS image key things are -
    1) feature set ie. you need a feature set that supports all the things you are currently doing
    2) memory on your supervisor and whether you have enough
    3) module support ie. you need to check the release notes for each release because they may not support all your existing modules
    Jon

  • Basic questions from a new mozaic owner

    I have some very basic questions about how to use the new mozaic 2G mp3 player. I bought the Mozaic because it has a speaker and sleep timer, but I'm finding it to be much harder to use than other mp3 players that I have had (Ipod shuffle, clix etc). This may reflect my failure to look in the right place but I have to say the "help" section isn't much help.
    Here goes:
    . I download podcasts to listen to during my morning run. WMP provides an easy to find place in its program, "recently added," which allows the user to just work with those files. As near as I can tell, Creative makes you wade through all of your tracks. Is there some way to create a file to which "recently added" tracks, or specific tracks, can be dumped? How about automatic tagging of these added files?
    2. I have several thousand pictures on this hard dri've. Apparently, the Mozaic Centrale
    Is going to copy all of them, which strikes me as a waste of space. Is there a way to shut this function off? I couldn't care less if a single photo was added to the centrale program (or whatever it's called). Is it really going to duplicate all of the jpg files?
    3. I have the Zen Stone plus speaker which has served me very well. I had similar problems working with whatever Zen was calling its media player and wound up using WMP instead. I"d like to take a run at using the dedicated Zen media player....
    I apologize for the basic nature of these questions, but the answers weren't obvious to me from the materials I was able to locate.
    gba

    sineadholly wrote:
    Problem with speaker. I read you need to do a firmware update to get the speaker option on your product's menu so i've completely updated it, but still no option to switch speaker on, and won't just come on when i unplug the headphones, any ideas?
    what exactly is the model of your Mozaic? Is it EZ 00, EZ 300 or plane ZEN Mozaic?

  • A few simple questions from a new Iphone user

    Hi a few simple questions, just got an iphone 2g - 2nd hand so not really sure what to expect. Anyway I guess my first question is about mine sometimes being a little slow - when I look at contacts and sometimes when sending a txt it slows down/freezes a little - normal?
    Secondly Edge - I havent used it much but when I have its been painfully slow, is this normal - is it always really slow - cause I had read despite not being 3g Edge was actually pretty fast - what exactly is data roaming by the way? I mean I have been switched off as basically I dont wanna use the internet till next month when they change my contract to one I get unlimited access on - is that right?
    Im having a problems syncing videos to it - it just wont sync some but will others and Im not sure why - theyre same file type and they used to sync to my ipod touch but now they wont for some reason
    Cheers

    I have the origina iPhone.
    Downloaded 2.0, synced phone with everything UNchecked. Installed 2.0. Synced with all the options checked to reload my data. The iPhone has been great. Noticed a little lag when I opened contacts. Installed the new upgrade, and everything is back, no lag.
    Edge is Edge and nothing more. It is slow compared to a strong 3g signal. But is liveable most of the time. Heavy traffic can slow it down to barely usable.
    My four wheel drive club has a web site with a large photo section. I was standing out in the middle of parking lot in San Jose, Ca and showing a friend some photos. It opens up a page of small picts to choose from. Select a print and it enlarges, He was amazed at how fast they appeard. Especially given the quantity of photos.

  • Few Questions From A New

    what's up? new creative user, just jumped on board in april with a Muvo Micro N200 GB and bought my little sis a 256 Muvo TX FM. I just have a few questions for the experienced users.
    . What's the point of the Zen Micro? Spend 80 bucks on a 5 GB player when you can buy a 20GB player for around 200 (Zen Xtra), what sense does it make?
    2. Why doesn't the zen touch come in 60GB capacity like the XTRA?
    3. Why is the Touch soo much more expensi've than the Xtra?
    4. Why are people still buying ipods when creative is >>> the ipod in almost every way? Show me an ipod with 20 gigs that can hold 0,000 songs, FM radio, voice recorder, and with a 24 hour battery life.
    5. why is Cnet.com sooo biased towards the ipod?
    6. WHERE is the zen sleek available? I checked amazon.com - not there.
    7. what's the difference between the muvo micro n200 and the zen nano plus that I've seen in walmart? features are the same.
    8. Why doesn't creative include some REAL headphones with their mp3 players instead of those pieces of feces that they come with now? After spending 300 for a 40 gig zen touch, I deserve some decent headphones!
    dang, didn't realize I had soo many questions.

    Okay, let me give this a try:
    . Simple - the Micro is smaller. For many folks, convenience and portability are more important than capacity. Try fitting an Xtra in your front pocket.
    2. Again, it's a size issue. The Touch uses a single-platter .8 inch dri've. In any player the bulk of the space is taken up by the dri've and the battery. bigger dri've=bigger player. The Touch was designed to compete with the itty-bitty Ipod.
    3. The Touch is a newer model that incorporates the whole "touch" interface. Newer things are almost always more expensi've.
    8. No company provides decent headphones with their player. Have you ever heard Apple's headphones? Part of this is cost, and part of it is that for many people, especially audiophiles, headphone choice is very personal. It is akin to why most bikes don't come with pedals.
    There you go Bitch!Message Edited by cameron on 08-02-2005 07:35 AM

  • 2 questions from a new user........

    7/26
    Hi!  Forgive me but I am a new Iphone user and have 2 questions.  1) How/where do you find what the remaining
    memory on your phone is after some apps have been added?  2) I have deleted the icon of a free app I downloaded
    but understand that does not delete the content of the previously downloaded app.  How/where do I delete the
    content of a no longer needed app?  Many thanks for your assistance.  PA Dennis

    Number one. Connect the iPhone to your computer, launch iTunes. Select the iPhone under Devices left side of the iTunes window. Select any of the taps to see storage availability at the bottom of the window.
    Number two. Select Apps under Library left side of the iTunes window. Right or control click an app then click Delete.
    Connect your iPhone to your computer, select the Apps tab from the menu then click Sync.

  • Questions from a New User

    I have just started using LabVIEW 7.1 Student Edition w/ NXT Toolkit.  I have a few questions I would like answered.
    Loops:  In NXT-G, you could make a loop run a certian number of times.  How is that done in LabVIEW?
    Variables:  In NXT-G, Variables could be easily created.  In LabVIEW, all I can find is the LOCAL variable.  I can't figure this out.
    Documentation:  Where is a good user manual or set of tutorials?
    How on Earth do arrays work?
    I'd like it if someone can help me with these.
    Team RoboSquad
    http:\\teamrobosquad.blogspot.com

    Hi RoboSquad -
    You certainly ask lots of questions -- a good characteristic for a beginner to have!  I don't have all the answers, but hopefully I can address some of your queries.
    Loops: sounds like you've worked out the idea that you can watch the loop counter (i) of a while loop and wire a true value into the stop condition terminal when you've finished the number of iterations you want.  Albert's comments are correct for "for" loops in full LabVIEW, but you're correct that the NXT Toolkit only includes "while" loops.  Auto-indexing will still work; see my comment on arrays.
    Variables: local variables are basically "references" to front panel indicators or controls, and can be read or written just like normal variables.  But depending on what you're really trying to do, just adding a constant to the block diagram or using wires to pass a value to different parts of your program may be a better solution.
    Documentation: the LabVIEW help is pretty extensive and comes with LabVIEW.  You can also use the Example Finder to search for examples for a particular topic, including "while" and "array."
    Arrays: from your post, it isn't clear to me whether you're completely unfamiliar with what an array is, or you're just confused by LabVIEW's implementation of them.  If it's the former (what is an array?), your best bet is to use Google or Wikipedia to build some basic knowledge.  If it's the latter (how do arrays work in LV?), try using the Example Finder to find and work through some examples.  If you're still confused, try to ask a more specific question.  One thing that may be confusing is that, by default, arrays don't have a type.  If you drop an array constant on the block diagram, you get an array of <nothings> with a black border.  To tell LV what types of values will be in that array, you have to drop a constant of that type inside the black box: a numeric constant, a boolean constant, a string constant, etc.  Then the array constant which change color to match the data type it will hold, and you'll be able to type in values for the different elements of the array.  Maybe that's the key realization you're missing?
    Debug gray-out: when you turn on Execution Highlighting on a LV block diagram, LV will gray-out parts of the program it hasn't executed yet.  Once the sensors have been read and are ready to be displayed, the meter indicator should get "re-colorized."
    Input dup: "dup" is an abbreviation for "duplicate," meaning you'll get back the same value that you wired into "Input."  This is purely an aesthetics thing; it makes block diagrams a little less messy.  Rather than wiring one value separately to a whole bunch of subVIs in your program (and having wires going around all of your subVIs), you can instead wire that same value "through" each of the subVIs.  This results in a clean-looking diagram where the subVIs look like traincars sitting on a "railroad track" of wires.
    Whew!  That was certainly a long post, but I hope it gave you some new ideas to investigate.  Let us know when you have more questions!
    James Blair
    NI R&D

  • Question from Brand New User / Thanks

    Hi - I'm a new smart phone user (Samsung Galaxy S III) with a very basic question (thanks).  I have the 4GB data plan.  When I click the "Internet" icon on the Home screen (and connect using the phone, instead of a Wi-Fi network), does my usage of data end when I "exit" the Internet by touching the Home key (returning to the Home screen)?  In other words, do I need to do anything else to disconnect from the Internet, and thus stop using the data?  I hate to think that by just returning to the Home screen, that I might in effect have just 'minimized' the Internet view, without disconnecting, and am thus still using data, until the next time the phone is shut off.  Thank you.

    Unless you turn cellular data off, you can be using data.
    Everytime your email client "checks" to see if there are any new emails, whether there are any or not, you use data. Everytime you receive a Facebook notification, you use data, everytime you get ANY type of notification, other than a text message, you are using data from your allowance. Your internet browser is not the only item which uses data.

  • A Dumb Question From A New CS3 User

    I am in the process of building a new site using CS3. This is
    my first experience with this product and I have what I am sure is
    a remarkably dumb question. I have an image (a banner ad) centered
    on one of the pages and would like to insert a table to the left of
    the image without the image moving (i.e. down) from it's current
    location. How can this be done?
    Thanks!

    Thanks!
    That worked perfectly.
    quote:
    Originally posted by:
    Newsgroup User
    Hi Big,
    >I am in the process of building a new site using CS3.
    This is my first
    > experience with this product and I have what I am sure
    is a remarkably
    > dumb
    > question. I have an image (a banner ad) centered on one
    of the pages and
    > would
    > like to insert a table to the left of the image without
    the image moving
    > (i.e.
    > down) from it's current location. How can this be done?
    An easy way is to make your table with two cells, then put
    the banner in the
    right cell - if you need more subdivison of the left cell,
    you can put a
    table in it.
    Aloha,
    Jerry

  • A quick question from someone new to the forum, PLEASE help.

    Hey Guys/Girls I have had my iphone 3g for over 2 years now I am not under any warranty or anything like that and recently my Iphone 3g power/hold button stopped working. I was wondering if there is anyway to fix it that you guys know about and also how much it would cost me to get it fixed?
    Thanks alot in advance for you help.

    I understand that without the contract that i would of had to pay that much, and yes now this much time later with so many newer versions of the phone released it does sound insane that i would have to pay 200$ to replace this one, seeing as i would have to hand this one in for it and they can turn around and fix it for next to nothing and sell it refurbished.
    I dont understand how you think 200$ for a 3 year old phone sounds like a reasonable price, unless your loaded or something. I'm not trying to be rude but in my opinion that is way to much money.
    I thought that maybe I could get it fixed from apple for around 25-75$

Maybe you are looking for