Question how SAP behaviours if blocked vendor fixed in src list or in Quota

Hi There,
I would like to know what to expect in the following situation when i create a requisition and activate source determination:
1 Sourcelist - I have create a 2 vedour source list. Fixed one vendor. The fixed vendor record is blocked. Will the system send an error msg in the Purchase req or will the system automatically asign the other vendor without sending a message?
2. Quota arrangement - I have set up a 2 vendor quota arrangement. The effective quota vendor record is blocked, what will the system do when I try to create a requsition and activate source determination?
Regards.
Edited by: Sheena Roberts on Oct 17, 2008 7:12 PM

> 1 Sourcelist - I have create a 2 vedour source list. Fixed one vendor. The fixed vendor record is blocked. Will the system send an error msg in the Purchase req or will the system automatically asign the other vendor without sending a message?
Case : 1
First of all You cannot Select Indicator Fixed and Blocked in Source List at a Time. you should select only one either Fixed or Blocked. Otherwise System throws the following Error.
06 797 Please select either "blocked" or "fixed" indicator
Case : 2
If you Select Vendor in Souce list as Fixed and if you Block the Verndor in MK05 / XK05 then System wont suggest the Vendor and throw an error based on your Settings.

Similar Messages

How to limited the Block vendor can't to do the subcontract movement

we had set the vendor to blocked,
but we found when the W/H to do the Subcontract action, MB1B , movement 541, the system can't give any warrning message,
and generate the document no.
How to setup to restrict the W/H can't to do the movement for this block vendor ?
Thanks,

Hi,
How is the process started?
If you are using a sub-contract Purchase Order then I believe that the block would occur there, when the PO is created, and the warehouse would have no authority and no paperwork authorising the transfer to the sub-con vendor. If the warehouse is simpley executing a 541 'on the fly' then there doesn't seem much control. Maybe invoicing would be a problem too as there isn't anything to invoice against!
You may have more luck doing the transfer via MIGO but there is also an OSS note (659005) in this area as MIGO isn't even prompting for the vendor!
Could be user exit time with one of your ABAPers to check the vendor status when posting a 541 is attempted.
Regards,

Hideing the blocked vendor for F4 serch list

Hi ,
How we can hide the blocked vendors or materials for F4 search list .........
raghu

you can develope (customize) your own search help tab where you can include the deletion indicator to selection and list
you can even hide the field in the selection and assign "blank" as value, which then just lists the unblocked vendors.
Customizing transaction is OMSI

How to check & resolve block corruption if no RMAN backup is there?

*<<+MY Findings+>>*
to check block corruption :
(run command)
select * from v$database_block_corruption;
DB_VERIFY is useful in these situations:
When block corruption is expected;
Forecast any future problems w.r.t. database file/ block corruption;
When you restore files from a tape. It will help knowing if the first file pulled from tape is corrupt, instead of spending hours to extract all of them.
to check block corruption
DBVerify
C:\>dbv userid=nfadmin/nfadmin file=+DG1/nfdb/datafile/low_s_data.304.782536883 feedback=10000 blocksize=8192
can use DBMS_REPAIR to detect and repair corrupt blocks in tables and indexes
BEGIN
DBMS_REPAIR.admin_tables (
table_name => 'REPAIR_TABLE',
table_type => DBMS_REPAIR.repair_table,
action => DBMS_REPAIR.create_action,
tablespace => 'USERS');
DBMS_REPAIR.admin_tables (
table_name => 'ORPHAN_KEY_TABLE',
table_type => DBMS_REPAIR.orphan_table,
action => DBMS_REPAIR.create_action,
tablespace => 'USERS');
END;
Question* :::how to check & resolve block corruption if no RMAN backup is there?

http://www.oracle.com/technetwork/database/focus-areas/availability/maa-datacorruption-bestpractices-396464.pdf
http://www.oracle-base.com/articles/misc/detect-and-correct-corruption.php

How do i check ensure that SAP checks for duplicate vendor invoice numbers?

Hi Experts -
How do I verify that SAP checks for duplicate vendor invoice numbers and blocks duplicate invoices from being paid?
Thanks!

Hi
Pls chek the settigs by following the path
IMG>Materials Management>Logistics Invoice Verification>Incoming Invoice>Set Check for Duplicate Invoice.
Here you make the settings for creating a duplicate invoice check.
Moreever, in the vendor master, you need to tick the check box for duplicate invoice check.
I suggest you search the Forums before posting a query. There are lots of postings on this issue.
Thanks & regards
Sanil K Bhandari

How to block vendor invoices when GR is made to stock type 2?

Hi,
I would like to get your advices on the following case:
- I need to be able to block vendor EDI invoices from payment when GR is made with 101 to stock type "2", Quality inspection. Manual blocking is not the case here but SAP should block invoices automatically in these cases. Is there any user exit available for this? Invoice blocking should be made also in the case when initial GR is made with 107 (in this case invoice is blocked by standard) and material is then released from valuated GR blocked stock with 109 to stock type "2", Quality inspection. In standard system vendor invoice is now unblocked but my customer needs to have an invoice still blocked as material is in quality inspection stock type.
Please advice.
Br,
Tapio

Hi,
Refer this post
http://forums.sdn.sap.com/thread.jspa?threadID=1488428
You will get the idea

Report in SAP that shows me the fixed assets per vendor

Hi,
I have been asked to produce the following;
Can I run a report in SAP that shows me the fixed assets per vendor?
I need the detail of the depreciations (start and end date, purchase price, depreciation rate, methodu2026) and the fixed assets register (purchase amount, purchase date, vendor nameu2026)
Could you kindly explain to me in simple steps what report I should run?
Many thanks in advance.
Alex

Hi, there is no such report in SAP. You can develop your own, The main issue is that to get vendor for asset to which were issued material from storage. You can do it via batch(write down while purchasing to some field, or to find it via batch). Fir material for which batch management is not active it's not possible to, because you can buy one material from different vendors.

Hello there .. When I want to change my security question I can't and show me Emil not for me to send the information for change the security question how to fix this problem

Hello there .. When I want to change my security question I can't and show me Emil not for me to send the information for change the security question how to fix this problem

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a rescue email address or a Security Questions issue, then see:
         If you forgot the answers to your Apple ID security questions - Apple Support.
         Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

I forgot my security questions how do I fix this

I forgot my security questions how do I fix this

From a Kappy post
The Best Alternatives for Security Questions and Rescue Mail
1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

How do i post a question to SAP

Hi,
How do i post a question to SAP through service.sap.com?
Regards

Hi
Thanks for your reply.
I have the login and password of my own.
Kindly show me the path to post the question. in service.sap.com
My client finds difficult to close the Open PO's to apply notes for 4% CVD of ADC.
Is there any alternative solution for this?
If any one encountered the problem please suggest the solution, otherwise will post to SAP.
Regasrds

HT5312 I forgot my securty questions how do i fix that?

I forgot secutry questions how do i fix that? unable to buy apps without them..

Read the page that you posted from, that has instructions for how to reset them i.e. if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 half-way down that page should let you reset them.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

TS2446 i didnt forget my password i just forgot the ancwers to my security questions. how do i fix this?

i didnt forget my password i forgot the ancwers to my security questions. how do i fix this?

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

Error in BDC program for Block vendor in SAP R/3

Hello friends,
I wrote a BDC program to block vendor using FK02.
When I debug the program in <b>No screen</b> mode
the program gives a error 'No batch input data for screen SAPMSSY3 0131.
But the screen name and screen number is not available in the program.
When I execute without debugging in No screen mode, the program works correctly.
When I run in ALL screen mode, the program works correctly and the program does not prompt for SAPMSSY3 0131 screen.
Is there any solution for this problem.

check this
... MODE mode
Effect
The processing mode can take the following values:
'A' Display screen
'E' Display only if an error occurs
'N' Do not display
<b>'P' Do not display; debugging possible</b>
If the MODE addition is omitted, then the processing mode is 'A'.
If a screen is displayed in processing mode 'E' because the system reached the end of the BDC data, the system automatically switches to processing mode 'A'.
If breakpoints are set in a transaction tcod called using the CALL TRANSACTION tcod USING itab variant, these are not actually reached in 'N' mode. The system tries to insert data in the Debugger screen; the call ends with SY-SUBRC = 1001 and the message "Batch input data is not available for screen SAPMSSY3 0131" (S 00 344).
Conversely, in 'P' mode, transaction screens are processed in the background (as in 'N' mode) and debugging is possible.
Regards
Prabhu

I forgot awnsers to security questions how do I fix this

I forgot the awnsers to my security questions how do I change them

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

Hi SAP FI/CO GURUS ...... PLEASE GIVE ME INTERVIEW QUESTIONS ON SAP FI/CO

Hi FI/CO gurus
I require your great help to get my brother into SAP House. He had done his FI/CO training and he is trying as fresher into SAP. So i request you to please give me interview questions on SAP FI/CO in topic wise. The reason i am asking here in this forum is, a lot of gurus who are having great experience are there in this group. if i get help from these gurus, that will be great help to my brother into get into SAP FI/CO.
So i request you to please send me interview questions on SAP FI and CO in topic wise. Awaiting for your reply.
Regards
Raj

Hi,
Please find below few questions on FI. I think those are very useful for intervew
SAF FI Technical Interview Questions 1
1. Tell me about FI Organizational structure?
Ans:     Client
               |
      Operating Concern
               |
Controlling area1       Controlling Area 2
         |
Co. Code 1 Co. Code 2
    |
Bus area 1 Bus area2 Bus Area3 Bus Area 4
2. How many Normal and Special periods will be there in fiscal year, why do u use special periods?
Ans: 12 Normal posting period and 4 special periods are in the fiscal year which can be used for posting tax and audit adjustments to a closed fiscal year.
3.Where do you open and close periods?
Ans: PPV is used to open and close the periods based on a/c types considering GL Accounts. Tr. Code. OB52.
4.What do you enter in Company code Global settings?
Ans: 4 digit Alphanumeric key.
Name of the company
City
Country
Currency
Language
Address
5.What is document type, and what does it control? Examples.
Ans: Document type is nothing vouchers containing line items. Several business transac! tions can be identified within a particular document type.
It controls the document number ranges.
It controls the Header part of document
IT controls the line item level of the document
Helps filing of physical document
6. What is posting key and what does it control?
Ans: These are special classification keys. Two character numerical key it controls the entry of line items.
Posting key determines Account type, Debit/credit posting, Field status of transaction.
7. What is field status group, what does it control?
Ans: FSG is mandatory field in ! GL Creation. You use this field to define which fields are displayed when you post business transactions to a G/L account.
A field may have one of the following statuses.
- Suppressed
- Display
- Optional
- Required
8. What is chart of account and how many charts of accounts can be assigned to a company?
Ans: Chart of account is a list of all G/L accounts used by one or several company codes.
For each G/L account, the chart of accounts contains the account number, account name, and the information that controls how an account functions and how a G/L account is created in a Company code.
You have to assign a chart of accounts to each company code. This chart of accounts is the Operating chart of accounts and is used for the daily postings in this company code.
You have the following options when using multiple company codes.
You can use the same chart of accounts for all company codes
If the company codes all have the same requirements for the chart of accounts set up, assign all of the individual company codes to the same chart of accounts. This could be the case if all company codes are in the same country.
In addition to the operating chart of accounts, you can use two additional charts of accounts If the individual company codes need different charts of accounts, you can assign up to two charts of accounts in addition to the operating chart of accounts. This could be the case if company codes lie in multiple countries.
The use of different charts of accounts has no effect on the balance sheet and profit and loss statement. When creating the balance sheet or the profit and loss statement, you can choose whether to balance the co! mpany codes which use different charts of accounts together or separately.
9. What does definition of a chart of account contains?
Ans: chart of account key
Name
Maintenance language
Length of the GL Account Number
Controlling Integration
Group chart of accounts (Consolidation)
Block Indicator
10. Can one COA be assigned to several companies?
Ans: yes. One COA can be assigned to several companies.
11) What is account group and what does it control?
Ans: Account group determines which fields you can configure on the G/L master record. It is necessary to have at least two one for B/S and another one for P&L a/c.
It controls the Number ranges of GL A/C.
The status of fields of the master record of GL belongs to company code area.
12) What is reconciliation account; can you directly enter documents in that a/c?
Ans: When you p! ost items to a subsidiary ledger, the system automatically posts the same data to the general ledger. Each subsidiary ledger has one or more reconciliation accounts in the general ledger.
We cant use reconciliation account for direct postings.
13) How do you control field status of GL master records and from where do you control!
Ans: Field status variant is maintained all FSGs.
14) What are the segments of GL master record?
Ans:
- COA Segment
A/C group
Nature of account
Short text
GL a/c long text
Trading partner
Group Account Number
- Company code segment
Account currency
Tax
Reconciliation a/c for a/c type
OIM,LID,FSG.
15) What does Field status group assigned to a GL master record controls?
Ans: It controls the account assignments that are made to the account. Specifically the field status group controls whether postings to cost centers, internal orders, profitability segments and so on are required, not allowed (suppressed), or optional.
16) What is Country and operational chart of account? Why do you use group chart of account?
Ans: Operational chart of account Day to day activities It is mandatory.
Country COA Its used for legal specific requirement of each country. Its additional and optional.
Group COA used for consolidation of Company codes. This is for group consolidation purpose.
17) What are all the segments in a Customer/Vendor master record?
Ans: Segments in Customer           Segments in Vendor
-      General Data segment            General data segment
-      Company code segment         Company code segment
-      Sales area segment                 Purchasing organization Segment
18) What is open line item management? What do you mean by clearing open line items?
Ans: Open item management is further reconciliation function. OIM allows you to display the open and cleared items and amounts in an account. OIM should be used if an offsetting entry is made for every line item posted in the account. The a/c is reconciled and cleared against another account. Ex. Salary clearing account and GR/IR Clearing account.
19) What is residual payment and part payment?
Ans: Residual payment it clears original invoice with incoming amount and create new line item for remaining outstanding amount.
Partial payment it leaves the original invoice amount and creates new
line item for incoming amount.
20) What is internal and external number ranges?
Ans: Internal Number Ranges: Doc. No will be provided by the system automatically in serial order allotting the next available progressive number. The number must be in numerical.
External Number ranges: Doc. No will be given manually by the end user. System will not lock no automatically in this case. User can pick the number randomly. Number may be an alpha numeric.

Question how SAP behaviours if blocked vendor fixed in src list or in Quota

Similar Messages

Maybe you are looking for