Question: How to assign number ranges to the Official Excise Document Numbe

Question: How to assign number ranges to the Official Excise Document Number
Field name is: EXNUM, table name: J_1IEXCHDR
SAP CIN
Dear expert,
I will briefly explain the scenario:
I have created return po.
Process MIGO w.r.t. return PO- Material document generated.
Process: J1IS - excise invoice other movement create.
--> Now I want to print the document --> I m trying with T-code J1IP --> entered all the required data --. Used out put type - J1I0
But I am not getting the list of document for printing and even print is not coming.
There is no print document getting for a printing.
When I checked in an above said table (mentioned in question), I found that for transaction type OTHR, there is no number ranges defined for official document no.
And because of this reason I m not getting any document in the print.
Can you Pl extend Ur help and Pl suggest me where (path or transaction) the number ranges can be maintained for the official excise document No.
Thanking you all n advance and expecting your earliest response.
Regards
om

Dear Friend,
J_1IEXCHDR this table stores the all the excise documents created while excise transactions are done ,
for that Goto j1i9 or SNRO in these transaction you maintiane the number ranges for the
J_1IPLA2     PLA part II number range object
J_1IRG1     RG1 Number range object
J_1IRG1_T     No. Range for RG1 - Excise group / Material
J_1IRG23A1     RG23A part 1 no. range object
J_1IRG23A2     RG23A part II number range object
J_1IRG23C1     RG23C part I number range object
J_1IRG23C2     RG23C part II number range object
J_1IRG23D     Folio Numbers for RG 23D
like these lot of objects are there for them u maintiane the no. ranges
Regards
Pramod

Similar Messages

How to assign voided cheque to the new payment document no.

Hi Experts,
A cheque no 11111 was manually assigned to a payment document no. created for a vendor X but physically another cheque no. 22222 was issued to vendor X by mistake. Later on the user issued the cheque no. 11111 phisycally lying with him to vendor Y but did not assigned this cheque to vendor Y's as this was previously assigned to vendor X. When the user came to know this, he reversed the payment document no. by voiding the cheque no. 11111 with void reason ''Inserting wrong cheque lot'' and created another payment document no for vendor X with cheque no. 22222. This way he corrected the vendor X payment document with cheque no. 22222. Now he wants to assign the cheque no. 11111 which is voided to vendor Y's payment document. Further he has issued many cheques from the cheque lot which contain the cheque no. 11111 and 22222.
Is there any way to assign the voided cheque to the new payment document no as the user wants it very desparately.
Hoping for solution.
Rgds,
BABA

Hi Shailesh,
Use FCH5 to create check information. Enter thr payment document , Company Code, Fiscal year and the house bank information to assign the check. IF the check lot having the check number has further checks assigned from it, this check lot has to be made non-sequential so that we could manually assign the check number.
Thanks & Regards
Preeju Susan

Number range in Material Master for document number

Dear All,
I have an issue in that i have specified a number range (ex:5000000000-5111111111) for the year 2010.
If the number range finishes before the end of that year and i want to create a new number range. Is that possible
and how should i do that.
thanks ,
Vidhya

you can not create new number range but can extend the number range
number range (ex:5000000000-5111111111) for the year 2010.
number range (ex:5000000000-5911111111) for the year 2010.
tcode OMBT
hope this helps

Number Ranges for the Serial Number Profiles

Hi All,
We wanted to trace the Goods movement based on the serial numbers. we could make this possible by attaching the serial number profile with relevant procedure (Stock Chk) to the Material.
Now the issue left out is of Number range and the pop-up for the existing serial numbers for the material. Is it possible to define Number Ranges (Ext. / Int) to the Serial Number profile ? Also, to get a pop-up for the serail numbers of material currently in Stock, which can be issued. Currently, I have to get the detail of sr. No. thru' IQ09 / IQ03.
Pls advise.
Shekhar.

Hi,
Yes. In IMG under Plant maintenance -- > Technical objects -->Serial No profile.
Here you can create diff profile with difff procedures.
And mention the properties of each.
There is a material master record for each type in the system. For control purposes, the company wants to know which customer received which collector type, and which serial number(s) of the collector type were supplied to the customer, when the individual solar collectors were delivered.
It is therefore necessary to assign a serial number to the customer delivery in addition to the material number.
A serial number master record is created with the assignment of the serial number. You can maintain data fields specific to the serial number in the master record.
At a later date, it may be necessary to enter equipment master records for materials that have already been serialized and delivered to customers, for example, if the producer of the solar collectors also has to perform maintenance activities for the customers and therefore wants to use all the functions available in the equipment master record for a serialized material.
In order to keep this option open at any time, you must define a number range for serial numbers. The numbers assigned from this number range are not the serial numbers but reserved keys that stand for the combination of material number and serial number and the equipment number that may possibly be assigned.
You can also define one or more serial number profiles.
The serial number profile defines how and under which conditions a serial number is assigned for a material.
Note
A material can only be assigned serial numbers after the required serial number profile has been entered in the material master for a specific plant.

Vendor acct group and number range in the MDC vs MDS

IN MDM 3.0 when a new BP with vendor as role is created via UI in MDS the vendor is created with a generic BP number range in the MDS. The down stream MDC's all have different vendor account groups with different number ranges assigned in each MDC.. example...
client     type of vend   acct grp      num range
MDC1      purch vendor     com2      1000000-1999999
MDC1      acct vendor      act1      2000000-2999999
MDC2      purch vendor     pur1      2400000-2499999
MDC3      purch vendor     POV1      3599999-3599999
How does MDS know when it distributes the vendor to the MDC's what account group and number range to create the vendor with in the MDC's. The MDC cannot change all its existing master data that has been created already with the account groups and number ranges becuase field variants have been established. Where is this mapping contained MDS or XI and how is it done.

The number range in the MDS is determined by the value in the "Grouping" combo-box. This combo-box is populated by values entered in IMG activity Master Data Objects -> Business Partner -> Business Partner -> Basic Settings -> Number Ranges and Groupings -> Define Groupings and Assign Number Ranges. Each value must have an associated number range and one of the values must be defined as the standard grouping in case the user doesn't select a grouping. This is how numbering occurs in the MDS. Unfortunately you cannot assign more that one grouping to a new BP.
Now, for the MDCs. When sending a new BP to an MDC, for example an R/3, there must be an external number range setup in the MDS for that MDC and it shouldn't conflict with any number range in that MDC.
IMG Activity Master Data Exchange -> Central Settings -> ID Mapping -> Make General Settings for ID Mapping allows you to define which number range you want to use for a specific object type in a specific system (e.g. KNA1 (customer) in system R/3_100).
So far this isn't sufficient for you because you have 2 number ranges for MDC1 in your example.
In the IMG activity I just mentionned, there is also a possibility to add an additional parameter which allows you to assign a number range for each unique object-type/system/additional parameter combination. By putting the account group in the additional parameter field, this allows you to assign number ranges per account group.
What remains to be done is to use this information in the XI Mapping for BP to R/3 Vendor. The first thing is for the XI Mapping to map the MDS account group to the MDC account group. Then the XI Mapping must call the MDS to create a new ID-Mapping between the BP and the Vendor. During this call, the XI Mapping must provide all the usual parameters as well as the account group. This will ensure that the correct number range will be selected so the correct vendor id will be generated. This id will then be used in the ID Mapping.
If you need to create the Vendor for multiple account groups, then you will have to implement special logic to map the MDS account group from the BP to the many MDC account groups needed for the Vendor.
Hope this helps!

Every Shipping point has corresponding number range for the HU box number?

Hi,
Every Shipping point has corresponding number range for the HU box number assignment?
For example, we are doing packing, then a Handling Unit number has been generated. So where to define this number range of the HU number??
Is it from the SPRO or controled by programs.
Thanks.

Hi,
Please find good stuff on Handling Units Below:
HANDLING UNITS CONFIGURATION:
A Step by Step Guide to the SAP Handling Unit Management Configurations
The SAP Handling Unit Management system allows you to manage the entire movement of the handling units and the materials they contain rather than tracking each material individually.
This paper is for the HUM Delivery although some of the contents is related to Inventory under the Logistics General modules.
Table of Contents
Objective
IMG Menu The Starting Point
Handling Unit Management Overview
Start of HUM Outbound Deliveries Manual Packing Configuration
Define Number Ranges for Handling Units
Define Packaging Material Types
Define Material Group for Packaging Materials
Define Allowed Packaging Materials
Use Handling Unit Supplements
Maintain Goods Movements for Handling Unit Stock-Posting
Define User Status Profile
Set QM Check and Delivery Type for Each Movement Type
HU Requirement for Storage Locations and Default Values for Deliveries
Packing Control By Item Category
Define Requirements for Packing in the Delivery
Delivery Type Determination
Set Unique Number Assignment for HU Identification
Number Range Maintenance for HU Identification
Define Number Assignment for Each Packaging Material Type
Delivery Output type for Packing List
Maintain the Delivery Output Determination Procedure
What else to maintain after the Manual Handling Units Configurations?
Start of the Automatic Packaging Configuration
Define Number Ranges for Packing Instructions
Define Determination Type for Packing Instructions
Define Number Ranges for Packing Instruction Determination Records
What else to maintain after the necessary Automatic Packaging Configurations?
Appendix A: How to do Manual Packing for Non-Assigned Handlings Units?
Appendix B: Scenario 1 How to do Manual Packing by Delivery Item?
Appendix C: Scenario 2 How to Manual Pack the Materials into Pallets?
Appendix D: How to do Automatic Packing?
Appendix E: How to do Goods Movement for Handling Unit Material?
Appendix F: How to Unpack the Handling Unit Material?
A handling unit is a physical unit that consists of the packaging materials (load carrier / packaging material) and the goods contained therein. A handling unit is always a combination of materials and packaging materials. All the information contained in the material items, such as batches and serial numbers, is always available by way of the handling units.
Handling units can be nested, meaning that you can also create new handling units from several handling units as often as you like.
Handling units have unique, scannable identification numbers that can be formed according to standards such as EAN 128 or SSCC.
Figure 1: Handling unit example
Structure
The handling unit object contains the following attributes:
     Identification number
     Dimensions
     Weight
     Volume
     Status
     Materials and quantities
     Packaging materials
     Packing instructions
A handling unit consists of a handling unit header and handling unit items. For identification purposes, it is given a unique number.
Handling unit header
The header data of a handling unit is divided in the following way:
     Weight/Volume/Dimensions
     General data
     Means-of-transport data
     Additional data
     Output determination procedure
For more information about each of these detailed points, see Editing detailed data for handling units.
Status
The handling unit is linked to general status management. In this way, the various physical states (planned or implemented) and other attributes (weighed, loaded, blocked or posted goods issue) of handling units can be documented.
You can use the HU_ST_INIT user parameter when you create handling units without object reference to set which initial status the handling unit is to have when it is created.
If you want to implement a status of your own, you can define a user-specific procedure for the packaging material type (see also Define Packaging Material Types).
Handling unit item
The items of a handling unit can consist of material items, packaging materials or other handling units that appear in an overview. For more information about this overview, see the Contents section of Editing detailed data for handling units.
To access the item data of an individual handling unit, select the handling unit concerned and choose Goto  Detailed HU data  Contents.
Integration
Handling units can be used in all processes within the supply chain.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

How to get the Next Material Document Number

Hi,
Please let me know How to get the next Material Document Number using Functional Module,
Material Document number are in MSEG table.
Regards,
Ganesh

Hi Ganesh,
if you want the next matrial number then first of all you have to define it as a number range in transaction snro.After creating the number range you have to define the interval.
now you can use your number range by calling the function module
CALL FUNCTION 'NUMBER_GET_NEXT'
      EXPORTING
        nr_range_nr             = '01' " here you have to give the number range number which you have defined in number range
        object                  = 'ZPRODLOG' " Number Range
      IMPORTING
        number                  = wa_prod_error_log-seqnr " sequence number generated,in your case material number field
      EXCEPTIONS
        interval_not_found      = 1
        number_range_not_intern = 2
        object_not_found        = 3
        quantity_is_0           = 4
        quantity_is_not_1       = 5
        interval_overflow       = 6
        buffer_overflow         = 7
        OTHERS                  = 8.
each and every time next number will get generated .
i hope this will help you.
Thanks,
Tanmaya

How I know my answer to the security question, How I know my answer to the security question

How I know my answer to the security question, How I know my answer to the security question

Click here for information. If you can't reset them through the method described in that article or by sending yourself a rescue email(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section.
It isn't possible to create a rescue email address without correctly answering two of the questions. Nobody on these boards can reset them for you.
(94895)

How to assign Profit segment to the G/L account

hi all,
have anyone know how to assign Profit segment to the G/L account?
rgds,
Worached

Hi,
   Select the
     1. Field Status Group for Profitability segment (T.Code : OBC4)
     2. Select the automatic account assignment (T.Code : OKB9)
     3. Select the PA Transfer Strcuture , direct posting from FI and MM.
Hope this helps. Please assign points as way of thanks.
Thanks
Lakshmi Narayana

Number range for the Material type

Hi,
When I am trying to create the number range for the Material Type, when I choose the groups the following error has occurred
No elements exist for the object/sub-object
What may be the problem
Thanks in advance

Hi Binu,
Had similar issue lately.
This is happening as the download of the category is not done properly.
So the solution which wrkd for me was to dwld the content again correctly, and if its done, there'll be no such error shootin up.
Suji

Number ranges for SD and FI documents(Invoices, credit and debit notes )

Hi all,
I have a requirement that that the document numbers used on sales documents issued to customers be within the same number range.that means SD and FI documents (Invoices, credit and debit notes to customers) should be in the same number range.
Can anybody tell me userexit for this or related solution or how should I approach to it.
Regards,
Azra.

>
Azra Husain wrote:
> SD and FI documents (Invoices, credit and debit notes to customers) should be in the same number range.
>
> Can anybody tell me userexit for this or related solution or how should I approach to it.
> Regards,
> Azra.
What do you mean by same number range?
As for as i know number ranges are application specific so you cannot have both SD and FI documents in a same number range.
What you can do with userexits is to assign a number range based on a condition. For example Plant based Billing number range, even you cannot have same number range for Sales order and billing.
Regards
Karthik D

How to select data from a table by passing document number from another tab

How to select data from a table by passing document number from another table.
for eg:-
I want to display name, adres, region from ADRC table
by using field delivery document number
Kind Regards,
Shanbagavalli.S

Hi Shanbagavalli,
There are multiple solutions to this questions a few i will try to answer and then you can take the best required for your requirements.
**Consider that you have a Internal table having document number from other table..
SELECT NAME ADRES REGION FROM ADRC
       INTO IT_ADRC
       FOR ALL ENTRIES IN IT_DOC
       WHERE DOCUMENT_NO = IT_DOC-DOCUMENT_NO.
**Consider that you have 1 document number then
SELECT NAME ADRES REGION FROM ADRC
     INTO IT_ADRC
     WHERE DOCUMENT_NO = W_DOCUMENT_NO.
Hope this solves your problem.
Regards,
Kunjal

Cin Number range issue.(capturing Excise Invoice)

Hi guys
I created sales cycle and after i am creating excise invoice thru tcode-j1iin
When i enter excise group and series group and after saving it.. it is showing error message that internal number range for J_1IINTNUM
I have maintained number range for this in tcode-j1i9..
and i assigned this number range to billing typejexexcise invoice.
even though error come.
Help in this issue
Here the error message:
Error in allocating internal document number Interval not found Number object J_1IINTNUM

Hi!
Kindly check the number range maintained is as Follows ??
No. Year From Number To Number
01 2008 0001000000 0001099999
CIN only takes No 01, it does not recognises any other no.
Moreover the number range should never be maintained as External Numberr range.
Check the same and let us have the feedback.
Regards,
Dnyandeo H. Ainarkar

How to download list of PO's from Invoice document number.

Hi,
We have received a querry from one of the end user regarding Parked Invoice document.User wish to download the list of PO's pertaining to one Parked Invoice document number.
We can not suggest user to use SE16 due to authorisation issue.
Please suggest the tcode through which list of PO's can be downloaded for given Invoice document number.
Regards,
Kiran

Hi,
In T-Code MIR6, give the invoice document number on the initial screen and execute. On the Output screen click on the "Spectacles Icon" and it displays the Invoice document overview. Here the user can see the list of PO for the corresponding Invoice document number.
If the above does not help, customized report has to be created.
Thanks and Regards,
Maheshwari

Maintain number range interval "01" for inventory documents

hi,
when i am creating a physical inventory creating document t.code LI01 i got this eror:
Maintain number range interval "01" for inventory documents.where i have to maintain please reply me.
naveen

hi,
spro->log.execution>warehouse mgmt->activities->physical inventory---->maintain number ranges.
Regards,
velu

Question: How to assign number ranges to the Official Excise Document Numbe

Similar Messages

Maybe you are looking for