Question in Mapping- (N:1 Mapping)

Dear friends,
Hope everybody is doing great.
I am doing file to Idoc scenario.
I want to map N elements from source side to target one element under particular node.
When I duplicate the node on the target side and do mapping, it pops up below error while saving "The source or target structure has been changed or could not be found in the Integration Repository. The mapping definition contains elements or attributes that do not exist in the changed structure. The relevant entries will be deleted ".
True, because I duplicated the node, and did mapping, target structure is changed.
What should I do in this case?
Thanks in advance.
Thanks
Narayana

Hi Narayana,
You can also try it in graphicla mapping without any trouble. Follow the below steps.
In your target structure, make sure that you have mapped all the mandatory fields of the IDOC.
Lets say that your source is
Source
A
B
C
and target is ORDERS05 IDOC which will look like
ORDERS05
   IDOC
      E1EDK14
         ORGID
Now map like below.
A --> E1EDK14
A -->     ORGID
Now duplicate the E1EDK14
B --> E1EDK14
B -->     ORGID
Duplicate it again
C --> E1EDK14
C -->     ORGID
I think this solves your problem.

Similar Messages

Questions about Mapping GL Accounts to Group Accounts

Hi,
I have some questions about mapping gl accounts to group accounts while configuring OBIEE APPS 7.9.6.3 with EBS R12 as a source:
FIRST QUESTION.-
For file file_group_acct_codes_ora.csv, I have the following accounts from my customer:
101101 - Caja Administrativa
101102 - Fondo Revolvente
101103 - Caja de Cambios
101104 - Efectivo en cajero
This group of accounts is named CASH, now my customer said that this group begins in 101101 and ends in 101199 but in this moment only have this 4 accounts in GL, the rest of the accounts, I mean 101105-101199 are not used right now, they are gonna used in the future.
So, my question is, in file_group_acct_codes_ora.csv how I need to put this group:
In this way:
CHART OF ACCOUNTS ID,FROM ACCT,TO ACCT,GROUP_ACCT_NUM
50308,101101,101104,CASH
Or in this way:
CHART OF ACCOUNTS ID,FROM ACCT,TO ACCT,GROUP_ACCT_NUM
50308,101101,101199,CASH
I mean, is there any problem if I use the second way, or is necessary to do it in the first way, and why?
SECOND QUESTION.-
For file file_group_acct_names.csv, when I update with a new group of accounts, is there any rule or size boundary for GROUP_ACCOUNT_NAME?
THIRD QUESTION.-
For file_group_acct_names.csv, what is the value in column LANGUAGE? I mean, is EBS language?, DB language?, server language?
I hope that someone can help me, because I need to clarify this and don't do the first full load and this load ends with error because of this.
Regards,
Arnulfo

I'll take some broad swipes at this and let the smarter people come fill in the details.
We have a true 1:1 setup in our office and have moved to PHDs as a means of protecting against downtime. The thinking is that we will have a spare machine lying around with our base installation ready to go. If a user's machine fails we'll replace it with the spare machine, let it sync the user directory from the server, and we're back in business. It's no substitute for a real backup system, but it potentially avoids having to run a restore from your backups. It also reduces network traffic compared to plain networked homes, and still lets your users work if the server goes down, but provides the benefits of centralized management. John DeTroye wrote a nice article about this.
If you've already got data on your "client" Mac you will need to move it onto the server. PHDs will download data from the server to the client on the first sync, but will not upload a complete home directory from the client to an empty directory on the server. You'll find some posts in this forum discussing how people have gone about migrating data prior to that first sync.
WGM allows you to establish exclusions for stuff you don't want to sync.
One thing to watch out for in the scenario you describe is the so-called "rabbit effect." Assume Bob uses Mac1 as his primary machine. If one day he logs into Mac2 his home directory will be downloaded to Mac2. Once he returns to Mac1 he'll still be cluttering up Mac2 with his data. If he logs into Mac3 the next day and Tom and Sue are also periodically logging into different machines, you can see how you'll end up with a mess pretty quickly.
Hope this helps.

Few questions about maps

Hi guys,
I got few question about maps.. Perhaps someone can help....
BTY, this work is a voluntary work for Human Rights in Syria...
{message:id=10193821}
{message:id=10192983}
{message:id=10192990}
Best Regards,
Fateh

Hi guys,
Please do not let me down ... it is a humanitarian work...
Regards,
Fateh

2 Questions on Maps in iOS 6 on iPhone 4

I know that certain iOS 6 Maps features are not available on on iPhone 4, but my questions are:
1. Is there a way to add the Maps to the lockscreen as advertised, or is that a 4s and above thing as well?
2. Is there a way to plan a trip with multiple destinations in the Maps app?
Thanks in advance!

rbrylawski wrote:
KC7GNM wrote:
Why is it bullying? You have a 2 year old phone and expect all the same features in newer phones with better hardware? The iphone 4 camera is no where's near as good at the 4S so that is probably the reason why. You would be complaining about the quality if they decided to give you panorama and it didn't work as well on the 4.
+1 It's the I'm entitled to everything mentality that is amazing. I don't know many (if any) phone manufacturers who offer software updates to phones that are two years out of date, yet Apple does. Only they can't offer all upgrades as the processor or camera, etc., on older devices can't be compatible with the newer features. Yet, people will still complain.......
I wouldn't complain if they wouldn't be flashing these new features in my face for months at a time, saying that i'll get them in the new operating system, and then once i get it, i realize that none of them are things i can have.
just say "these features are only for ios 6, which will only be available for iphone 4S and up."
if they said that, i would have more respect for them. instead they just say you'll get all these things, then in fine print later after it's released 'oh yea, you can't take panoramic photos. yea yea i know you can do that NOW with a ton of free apps, but the one we're making, you can't have. no reason. doesn't require more processing power. you're able to do it with the processing power you have now. also has nothing to do with the resolution of your photos. it just has to do with stitching multiple photos together. but yea, you can't have it, but i'm going to get your hopes up till september so you download it anyway. you may be disappointed after you download it, but i never SAID you'd be able to have all these features."

LDAPMAP: questions about mapping

Hi All.
We want to implement an interface between our SAP ECC6 and Microsoft Active-Directory.
I have some questions about the mapping done in LDAPMAP t-code:
1.
What the meaning of the structure and fieldname (e.g. structure-USERNAME; field-BAPINAME)?
They cannot be found anywhere in the DB or in SE36.
2.
How do I create new pairs (e.g. PA0008-TRFGR)?
3.
How do I communicate with these structure-fields, i.e. fill data to them?
Any help will be appreciated.
Ayal Telem.

Hi Ayal,
Do you got any clue on this.? It will be great help if you provide me some inputs on this. I'm facing similiar kind of requirement.
Thanks a lot.

Question about mapping logical sources to dimensions

1) On my physical layer I have one fact table (FACTS_DETAILS) linked with CATEGORY dimension table. Other fact tables (aggregated data) don't linked with this CATEGORY dimension with physical joins.
2) On my BMM layer I have mapped my dimension "Category" with my FACT_DETAILS.
3) Other LSTs don't mapped on "Category" dimension, as they do not linked with Categories on physical layer.
4) When I try to display detailed facts by CATEGORY - it's ok.
5) When I add another dimension (For example, COUNTRY) i get error, because COUNTRY dimension isn't compatible with my FACTS_DETAILS.
The question is: how to avoid displaying error message at Answers in such situation? Maybe it is possible just to not display data without error message?

Sounds like you need to architect your physical/logical model a bit better and also you need to set the appropriate levels in the LTS for your facts and dimension logical table sources.

Question about mapping AD to OID

I'm trying to determine the correct entries for the activechg.map file.
I have 2 issues to resolve:
1. Most of the user accounts are in the AD users folder but I also have user accounts in an AD OU named "Cust Ser Reps". So do I need the following entires in the map file?
CN=Users,DC=norris,DC=intra:cn=Users,dc=norris,dc=intra
OU=Cust Ser Reps,DC=norris,DC=intra:cn=Users,dc=norris,dc=intra
2. I have a second AD domain (swtp.intra) that resides in a different forest from norris.intra. There is a 2-way external trust between them. How do I map this domain to OID? The OID is only setup for dc=norris,dc=intra.
Thanks for your help.
Tom

Hi Thomas
The answer to question one is "yes" that is exaclty how you do it. If you have users in different parts of the tree you can modify your Domain mapping rules by adding the second tree and both will be synced with OID.
To answer your second question, if you have a forest of AD servers then you should only sync with the Global Catalog Server. This will ensure that all changes made to any of the AD servers in the forest are synced with OID. You can read more about this in Chapter 43 of the OID admin guide.
If you have multiple independant AD servers then you need to create a new DIP profile for each one that you want to sync with using ODM to create the new profiles.
Jay

Questions In mapping...

1) Whats the purpose of conversion function and In which scenarion we gor for Conversion Functions...
2) Whats the use of mapping Pattern... and which scenarion we use
3) Whats the status of the messages in the message monitoring table.
venkat

Hi,
1) Whats the purpose of conversion function and In which scenarion we gor for Conversion Functions...
There are no conversion funcitons. There is a conversion agent where you will use this when you want to convert any documents like PDF etc into xml. Then you will use it. To use this you have to install this in XI. for this:
all docs can be found here:
http://help.sap.com/saphelp_nw04/helpdata/en/43/4c38c4cf105f85e10000000a1553f6/frameset.htm
SAP conversion agent it a tool that helps to convert unstructured data
(like EDI messages, work files, pdf files etc) into XI (or from XI)
you just use an IDE to develop the program that you can later on
put inside the adapter module (for fiel adapter for example)
so no programming (as it's drag and drop)
for many documents
2) Whats the use of mapping Pattern... and which scenarion we use
There is nothing like mapping pattern. just let us know what you are talking about or where you have heard about this?
3) Whats the status of the messages in the message monitoring table.
1.Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
2.Status: WAITING
The message had been sent and it is failed and is currently waiting for another attempt.
3.Status: HOLDING
The state of an EOIO message that cannot be delivered until its predecessors have been delivered.
4.Status: DELIVERING
The state of message when it has popped out of the Messaging queuing system and is in the process of being transmitted across the system or delivered to an application.
5.Status: SYSTEM ERROR
These error messages occur during transfer due to a failed server or abnormal operation on a consistent database instance. With some errors, an implicit Shutdown is performed.
6.Status: APPLICATION ERROR
The Subtree containing errors that are reported in the namespaces of applications (software component versions) that sends or receives XML messages using Exchange Infrastructure.
7.Status: CANCELED WITH ERRORS
The state assigned to a message when an administrator decides to abort sending the message, or when a message could not be delivered due to a fatal exception that cannot be repaired.
...Satish

A question about mapping

ok, my problem is this :
I use /faces/* mapping and i want to be able to put my links like
this :
<h:outputLink value="login.jsp">
<h:outputText value="Login" />
</hLoutputLink>
If do it like this then my apache doesnt find "the FacesContext" (i know it's a common problem).I know that I should change the link to "faces/login.jsp"
and it works if I do it , but when click on the link the address bar changes to
http://localhost/mysite/faces/faces/login.jsp
U see ? It ads one more /faces in the address. If I click many more times the address tends to look like that.
http://localhost/mysite/faces/faces/faces/faces/faces/faces/
faces/faces/faces/login.jsp
The login.jsp link is in a navigation bar which is in all my pages , if u're wondering how can click on the same link again and again.
So what should I do so that i'll see just one /faces in the adress bar ?(i would
like to keep my mapping as it is and not change to an extension mapping jus t to solve this).

I think I could change the links to commandlinks but i would like it to solve the problem using output link .One reason I used output link is cause it felt natural not to do otherwise.I mean I use command links and navigation rules , when there are many more possible outcomes. Here I want that everybody should be allowed to access this link .Btw, the link is not login.jsp cause u're right i should use a navigation rule for authentification , I just used login.jsp for example.The actual link is "viewsellads.jsp".
As for the "/faces/login.jsp" or "faces/login.jsp" , when u put no slash he goes to http://localhost/faces/login.jsp
But my web application is in a directory called "example" so I want tomcat to put the entire path .For short when I put no slash it goes where it should
http://localhost/example/faces/login.jsp
The reason this is so frustrating is probably cause I think I had the same problem some time ago too , when I was writing a site just with jsp and servlet. I didnt know there how to solve some relative path issue either, but
I changed to extension mapping ...and all was fine.But I dont know , it seems
that it should be another solution

Question about mapping art to a 3d object

I'm looking for help with mapping art to a 3d object using the extrude and bevel effect, and I keep running into the same issues.
I've attached an image of what I'm trying to replicate (on the left) and where I am currently at (on the right). The left image is what we're looking to duplicate, in a 3d manner, but I'm not able to add the roll tail (which now needs to have a bit of a curve coming towards you), without there being numerous surfaces in the 'map art' box. What I am hoping is that there is a way to create one surface that wraps completely around the roll, and then down to the tail, and curling towards the viewer. Currently when I do this it creates numerous surfaces so I have to map the art to piece it together and it doesn't line up with the other mapped art. I would so appreciate any help you can offer!
Also, I'm not able to get a great shadow inside the roll, is there something I'm missing with the lighting options?
Thank you!
(Using AI CS6 on a PC)

I managed this quickly:
for some reason it split the top surface of the reel into two though. the divide is at the top. I just mapped the symbol to both so it looks like it's going all round.

Question about Mapping& Typecasting

Hi, I am trying to typecast this map into characters at the end. I started by inputting the file as a byte array and have the treemap map it out and count the characters. But since I used bytes it comes back out to me as integers but what I want to display is characters. I'm not sure where I should typecast it since I just write System.out.printlnt (m) in order to print out the list. Any ideas?
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.PrintStream;
import java.util.Map;
import java.util.TreeMap;
public class charcount {
 public static void main(String[] args) throws IOException {
 try {
 File inFile= new File("text.txt");
 FileInputStream inStream= new FileInputStream(inFile);
 FileOutputStream out = new FileOutputStream("output.txt");
 PrintStream p = new PrintStream( out );
 int fileSize=(int)inFile.length();
 byte[] byteArray= new byte[fileSize];
 int b =inStream.read(byteArray);
 Map<Integer, Integer> m = new TreeMap<Integer, Integer>();
 for (int a: byteArray) {
 Integer freq= m.get(a);
 m.put(a, (freq == null) ? 1 : freq + 1);
 finally{


First of all, your Map object must have the following type parameter:
Map<Character, Integer> m = new TreeMap<Character, Integer>();Then, your foreach loop is more resonable if you extract from the byteArray byte values, rather than int values - As the array is an an array of byte elements...
Finally, you may remember that char is, in deep, a numeric value, interpreted by java to a character. So, you can cast a byte value into a char:
byte bVal = 97;
System.out.println((char)bVal);This will print the 'a' character in your console
Have fun!

Question about mapping.

How would I "map events to the indices of an array?" For example, I have an array that looks like:
{2, 2, 2, 6, 4, 10, 1, 1}
Instead of explicitly storing each event, I'd like to have the index of the array represent the event and have the element hold the number of times the event occurred. For example, the above would be:
Result of event: 1 2 3 4 5 6 7 8 9 10
Number of times event occurred: 2 3 0 1 0 1 0 0 0 1
Thanks.

If the events you're tracking are densely packed integers--that is, most or all of the integers in a given range--then you create an array. Let's say you're tracking events identified as 1-10. You'd create an array of 10 ints. arr[0] is how many times you've seen event 1, arr[1] is the count for event 2, etc.
Numerical array elements are initialized to zero upon creation, so every time you get an event, you increment the corresponding array element: int eventId = getEventIdSomehow();
arr[eventId]++; On the other hand, if your events are the numbers 1 1,000 2,500,000, 10,000,000, and 2,000,000,000 then you don't want an array of 2,000,000,000 elements just to track five of them. In that case, or if the events can't be identified as densely packed intgers, then use a java.util.Map. The key will identify which event, and the value will be the number of occurences.

Question on mapping measures in 10g

I have a very simple schema I am using to reproduce somethign on my end, three tables.
One table has a primary key that joins 1-n to the foreign keys of the other tables.
My dimension is from that central table, but both my measures are each from one of the other two tables.
In Analytic Workspace when I try to map my relational columns to the measure, and click apply, it simply removes the tables and mappings I added. All the examples I found in the oracle documentation lead me to think I need to create some sort of fact table or view which holds the measures in the same table as the dimension, but I do not want to pre-aggregate these.
Is there something I am doing incorrect in creating this basic cube?
All help is greatly appreciated!

But when I make some common change in the template and re-apply it in all the message mapping, wherever it is being
used, my overridden field mapping are lost and I am not able to keep track of the changes that has been done on top of the
template.
See....if you are using a template --> making some change to it --> re-importing it into your mapping program then the logic present in this template will be considered.....it wont be possible to retain the other mapping logic that you have used.
Or Do I need to make the changes individually in all the message mapping itself rather then template wherever the
template has been overridden?
seems so.

Complex string pattern match/sort question for mapping data - Exchange Enable mailbox use case

Hi, Im trying to do a runbook to Enable mailbox for a user. Our Exchange Admin uses a rule/formula to allocate the mailbox database based on users first name and this is what I am having difficulty replicating in Orchestrator to add the correct
data in the Database property of Enable Mailbox activity.
The Rule exchange uses, takes up to the first 3 chars of forename and based on an alphabetic sort, it will allocate to a particular mailbox db (we have a quite large Exchange Org with 20k users so hes tried to allocate about 500 users per mailboxDB). so
for example User Forename A-ALI = DB1, ALL-ANG = DB2, ANH-ANY=DB3,AO-BER=DB4 etc etc.
So I was hoping someone could advise of some string comparison activities native in Orchestrator or maybe done as last resort in powershell (as I'm not great in powershell) to provide a map of the published data for forname to appropriate mailbox matrix.
Any help on this would be much appreciated...
Cheers

You could use the built in Mid function [Mid(‘Return subset from this string’,1,3)] to get the first three letters of their name and honestly I would send
this to the Run .Net Script activity using powershell myself and do a select case to get it to publish to the database the name of the database server.
I am all for using built in activities to do things in Orchestrator but you are going to quickly find that you need to have good powershell scripting skills to extend the tools beyond the capabilities of the built in activities.
Vaughn

Question w/ mapping header text fields from the ORDERS05 idoc - Need help!!

My mapping seems to be combining two header texts categories(IDs) and putting in into the XML target field. That's the first issue.
The 2nd issue is trying to figure out how to only use only a part of the tdline.
The idoc value is: <TDLINE>232828-0 06/25/2009 EDI Vendor Confirmed</TDLINE> .
I only want to use the first part: 232828-0 and ignore the rest(
06/25/2009 EDI Vendor Confirmed).
Would someone have 30 mins to help a newbie out.
I can send screen shots of the idoc coming into PI and the XML file going out as well as my mapping for the field.
Thanks,
Jeff
jschreiber@ballhort .com

Jeff,
I have sent a test email pl send me screenshots.
Issue 2: Did you try to use standard function for texts i.e "substring". Open the mapping in editing mode and all the way down you can see "Function" from where you can choose std functions.
-Sid

Question in Mapping- (N:1 Mapping)

Similar Messages

Maybe you are looking for