Question in swedish regarding font appearance

Kanske en dum fråga, men jag har en kund som ställer följande fråga till mig. Jag är trött på att klicka i drop down listan för teckensnitt(familj) för att se dom under liggande teckensnitten. Finns det någon form av visning inställning som gör att när man har mus pekaren över teckensnittet så öppnas dom underliggande upp med automatik.

I currently am building up the courage to delete Font Book off my macbook.
As always, Font Book has no special, or dire functional need for the OS. It's just another font manager. Delete away.
I use Font Explorer X but I feel that my fonts are all over the place (in various folders).  Should I keep my fonts in one folder?
As long as you're not trying to keep them in one of the three main Fonts folders, it doesn't really matter where they are. For myself, I have all of my fonts on a separate partition in a folder named (big surprise), Fonts. Within that, they're all separated out by how they were purchased or acquired free with other software. The basic gist is that I keep them all in one place and activate them as needed.
I would always suggest setting up FEX (or Suitcase) to open fonts in place, and not to copy them anywhere when activated. There is simply no need to.
Also, I tend to have many fonts (being a teacher, I use different fonts and doodlebats), but many do not show in the drop-down menu when I am using Word 2008 for Mac.  Why is that?
I assume you mean dingbats, rather than doodlebats. But anyway, if only Word is affected, then the most likely reason is that its font cache files are damaged. Office keeps its own font cache data. To clear them:
Close all Office applications. Remove the following files. The tilde (~) indicates your home account.
~/Library/Preferences/Microsoft/Office Font Cache (11)
For Office 2008, the location of the second item is:
~/Library/Preferences/Microsoft/Office 2008/Office Font Cache (12)
For Office 2011, the location is:
~/Library/Preferences/Microsoft/Office 2011/Office Font Cache
Is Font Explorer X enough, or do I need Font Doctor also?
FEX has a good font analyzer built in. There isn't much of a need to purchase Font Doctor.

Similar Messages

  • After upgrading to OS 10.10 some fonts appear blurry. Specifically top menu bar, desktop icons, mail

    After upgrading to OS 10.10, some fonts appear blurry. Specifically top menu bar, desktop icons, mail and Safari. This only occurs after the computer has been running for awhile, not immediately after startup. I'm running an iMac, 20 inch, Mid-2007 with the following graphics: ATI Radeon HD 2400 XT 128 MB.
    It's not a huge problem, just darn annoying. Thoughts anyone?

    Hi,
    Please note that this upgrade related problem would very likely be what has been covered by the support document at the link below:
    http://support.apple.com/kb/TS2537
    If you also find any files named to include MessageSorting (which would mean you once have upgraded from a version of OSX earlier than 10.4, which is clearly the case for you), remove those, also, but never restore those.
    Often this is all that needs to be done, but you might then need to force an overall reindexing via the removal of the Envelope Index. Note the special instructions when forcing the reindexing of IMAP or Exchange accounts in the following:
    http://docs.info.apple.com/article.html?path=Mail/3.0/en/14019.html
    This will force the reindexing of all the POP mailboxes and all On My Mac mailboxes. With regard to any IMAP accounts if you have any, the practical result of this action of removing the account folder, is that with the IMAP account still set up in the Preferences, Mail will connect to the IMAP server and create a new account folder, and while doing so will index the messages in the mailbox folders of the IMAP accounts on the server.
    Keep me posted.
    Ernie

  • My question is in regard to pc to mac migration. How do I migrate information from my pc with specific user account to an existing user account on my mac? I do not want to use multiple mac user accounts.

    My question is in regard to pc to mac migration. How do I migrate information from my pc with specific user account to an existing user account on my mac? I do not want to use multiple mac user accounts.

    https://discussions.apple.com/message/16371308#16371308

  • Keynote PDF output: fonts appear "bold", milky background

    Hello,
    we observed two problems when exporting a Keynote presentation into PDF ("export" and "print" exhibit the same behaviour):
    (1) when opening the PDF in Preview, the medium-size fonts appear to be "bolder" than in the presentation, small fonts look OK. We have tried several fonts (e.g. Trebuchet), the effect seems to be independent of the font. Colors look exactly as in the presentation.
    (2) when opening the same PDF in Acrobat 8 Pro on either Mac or PC, the fonts look OK but all colours look as if through a "milky glass layer". This is an effect which is probably related to some color space conversion.
    A similar topic was discussed last November, but no satisfying solution was presented. Many thanks in advance for any help with this.

    It doesn't seem to matter what the Registry/Ordering is - I still get the error. I do recall that setting it to something known like Adobe and Japan1 had other effects, though, such as incorrectly chosen glyphs, though those could have been related to other issues we had at the time.
    Since any value seems to prompt the issue, it leaves me even more confused as to what could be the root of this problem. Distiller seems to bypass embedding CMaps by using the "Identity" encoding and simply writing the glyph indeces into the text stream. Does Preflight just not like embedded CMaps?
    I have uploaded a sample document to acrobat.com if anyone wants to take a look. It has several changes from the original description, in an attempt to root out the problem. Here is the URL:
    https://share.acrobat.com/adc/document.do?docid=4284cd55-d710-411f-8a91-51359564a78b
    Thanks again for any help.

  • When I export documents as a PDF in Indesign the fonts appear as squares. This has started happening since I updated my operating system to 10.9.4 on my iMac.

    When I export documents as a PDF in Indesign the fonts appear as squares. This has started happening since I updated my operating system to 10.9.4 on my iMac.

    Apple Mail uses Apple's own PDF viewer, and it's ... well, let's be friendly and say not really up to par. Don't use it for anything else than ascertaining there is *something* in your mail. Then use the free Adobe Reader to view your PDF.
    See this recent thread: http://forums.adobe.com/message/4526583

  • Font appearance jumping between light and bold

    When I first open thunderbird in the morning, fonts appear bold [as if all unread] then if i quit thunderbird and try again it open with font as light, with only unread email showing as bold.
    OS X Yosemite 10.10.3
    Thunderbird 31.6.0
    UTC/S 5.0.0
    This is now happening on another mac with Yosemite installed. It worked for a few days and now not working

    behnazutx wrote:
    The first respondent indicated that when the design is made into a PDF, then the fonts are embedded and visible across platforms. Are there any situations I should be aware of in which this isn't the case? If that statement is true or generally true, that is good news, and will make me feel a lot more OK about this process.
    I Googled "fonts that cannot be embedded in pdf" and these are the top 3 results:
    Why Some Fonts Cannot Be Embedded In PDF
    Cannot Embed font into InDesign PDF
    Adobe Acrobat X Pro * Font embedding and substitution

  • Japanese fonts appear larger in Flash Player  10.0.42.34

    Hi
    We're experiencing a strange problem in a flash swf object embedded on an aspx page in a .net web application.
    Environment :
    Adobe Flash Player  :  10.0.42.34
    Browesers : IE 6 , 7  Firefox 3.5
    Client machine configuration :
         Windows XP SP3
         East Asian Language Pack installed.
         Flash player version 10.0.42.34 installed.
    We're displaying Japanese text on the page through the flash player.
    What happens is that randomly on some client machines the Japanese fonts appear too large in size while on others
    they appear perfectly fine.
    We also have English , Honkkong and Chinese  versions of the page ..all of which work perfectly fine across all client machines.
    The issue is only with the Japanese version.
    Any pointers on this guys .... ?
    Please help !!!!
    Thanks

    Sure , here is the url :
    http://www.forevermark.com/ja-jp/The-World-of-Forevermark-/Precious-Collection/
    On some machines , the Japanese text in the centre section appears very large. ..( see attached snapshot)
    We initially encountered this on the version prior to the 10.0.42.34 version.
    However even after the upgrading to 10.0.42.34 , the problem still persists .
    Thanks

  • PDFs from CS3, ligatures not showing up on editor's PC, fonts appearance changed

    Hi there. I just redesigned a magazine using the Hypatia Sans family, Avenir family and Arno Pro family. Avenir is the one font I have been using. With both Hypatia and Arno, the ligatures totally drop out of the pdf when viewed on a PC. And, when the editor made the edits in the "comment-able" pdf and sent it back to me, really none of the fonts appear right. Nothing looks like Hypatia or Arno or Avenir. The font flow seems to stay put, but that is about it.
    I'm trying to pinpoint this a little tighter. But while I'm doing that, I wanted to put this out here on the discussion boards. Since this is an entire magazine, it's not going to be acceptable to proof it this way. I don't know if I can send a pdf to someone at Adobe to look at and see what they think is happening? I'm not finding much on the boards about this either so I don't know if it's a widespread issue or not.
    -K

    Follow up ...
    Kellie and I discussed and problem and then she checked with the editor.
    In fact, the editor was putting PDF comments on the InDesign-exported PDF file using MacOS Preview and then saving the file and returning it via e-mail to Kellie. MacOS Preview converted all of the text from Arno Pro, Avenir and Hypatia Sans to MacOS versions of Multiple Master Helvetica and Multiple Master Times fonts which clearly did not have all the glyphs of the original fonts.
    The editor was advised to download and install the free Adobe Reader and guess what? The problem went away.
    Problem solved!
    Sorry folks, but there is absolutely nothing that Adobe can do about this problem other than to continue to advise our customers to avoid PDF reader software that simply doesn't implement or doesn't properly implement the full PDF specification. (Note that this specification is an ISO standard now, not something that is secret or Adobe-proprietary in any way!)
              - Dov

  • Why do fonts appear in Keynote, but not in Font Folder?

    I made a misguided move in adding fonts through Font Book and am trying to restore my fonts to a previous iteration.  Strangely though, the fonts appear in Keynote, but not in the usual Fonts folders.  Can anyone shed light on why this might be the case?  More information can be found, under the Mavericks discussion forum, here.

    Suzanne,
    As is my guess, there is now something wrong with those fonts. There are utilities, that can possibly repair them - two mentioned in the article. If you have a backup of the fonts, from when they worked, perhaps just going to that, and reinstalling them will solve the issue. I'd hate to think that they might have to be acquired all over again, but that might be "plan D."
    Periodically, I will copy all of my fonts to DVD (now - used to be CD), just to have them available for new computers, or OS's. Over the decades, I have lost a few to corruption, that could not be repaired. In several cases, I had an older BU, that did work, but have had to buy a few again. Just checked on my workstation, and I've got 19,362, though seldom more than about 350 ever installed at one time.
    This reminds me that it's about time to do another BU, as I will be getting a new workstation and laptop fairly soon, and will need to transfer my fonts to them.
    Good luck, and hope that things can be saved - I hate to loose a favorite font.
    Hunt

  • Captivate 8 - "Question X of Y" Font Issue

    Hi All,
    I am using Captivate 8 to create a quiz and have set the "Question X of Y" font to be Sergoe UI Bold (with a different colour) to match our company Style Guide, however when I produce the Quiz - this Question X of Y produces/displays as a different font.  It is noticeable as all the other questions/answers on the slide are all set to Sergoe UI, so it is unmistakeably different.  Has anyone else come across this/ know how to fix it?
    Note:  I noticed some old forum discussions about Quiz font display issues in Cap 6, but nothing specific to the Question X of Y or in Cap 8.
    Any and all help appreciated.
    Thanks!
    Nicole

    Admittedly, I have tried the web safe fonts - but no luck! 
    Thanks anyway.
    Nicole

  • Private Fonts Appear in Numbers -- How?

    I have a family of fonts (Swiss 721) installed privately in my ~/Library/Fonts folder.
    When my wife logs into the computer, Swiss 721 does not show up in Pages or in Font Book. If she does a Spotlight search for "Swiss," nothing appears. This is the expected behavior.
    However, when she runs Numbers, the Swiss 721 family of fonts shows up. They mostly work: Outline fonts show as outlines. Condensed fonts appear to be condensed. And bold fonts appear bold. They all seem to have spacing problems. There are no font warnings issued when she opens a Numbers document containing any of the Swiss 721 fonts.
    I've tried using the atsutil to clear the font cache. I've tried deleting the iWork font cache as well. Neither has corrected the problem. When she starts up Numbers, there are these fonts that she cannot otherwise access. Very odd.
    So, how is this font family showing up in Numbers for my wife when it is actually installed privately under my user directory? Somehow Numbers is seeing them, but not perfectly, since, as I mentioned, the spacing is way off.
    Thank you,
    James Detwiler

    That was the solution. Auto activation was turned on.
    There was a copy of the font on an external drive. Auto activation allowed that font to be used without being installed. (The font did not display correctly, which alerted us that something odd was happening.)
    Thank you!!

  • Font appears as bold when published

    hi all!
    This font issue is driving me crazy..I have set the font to helvetica light on my site but when i publish the site on mobileme some sections appears as bold randomly. i have tried highlighting text and changing font type to helvetica light again but even though it appears as light in iweb when published it is still bold.
    Is there an easy solution to this please?

    I'm having the same issue as shannondasilva. Looks great offline in iweb but as soon as I publish my site the font appears bolder and thicker than it should. Very annoying and not consistent enough for Apple. Anyone worked out a way of making the font appear as it should without having to convert the text to an image, etc. I want my text to be found by google so it needs to remain as text. And yes I'm using standard Helvetica and Arial websafe fonts. Please can someone help here???

  • I upgraded to Firefox 6 random websites are using illegible fonts from my computer instead of the default. No issues with Firefox 5 or any other browser I use. Each time I open Firefox or reinstall it a different illegible font appears. Please help.

    Firefox 6 using incorrect fonts.

    When I delete the font that keeps showing up as the default, a new illegible font appears. The fonts are not 'garbled' they are just decorative typefaces that are being grabbed from my computer. I have never had an issue with my fonts on old Firefox versions or other browsers like chrome, safari, etc., so I don't think the issue is my fonts. I also don't want to have to delete all the fonts off of my computer. I uploaded another photo of when I deleted the font that was appearing before. Please help if anyone has found a solution to this problem with Firefox 6+ :/

  • When I type symbol font appears on screen and browswers fail to work properly, reboot fixes, new keybord fixed it but it now back?  driving me crazy..virus???

    when I type symbol font appears on screen (Safari, Mail, Firefox text boxes) and browswers fail to work properly (click on reply and browser tries to download), reboot will temp fixe, new keybord fixed it but it now back?  driving me crazy..virus???  When this starts up iMac does not work properly, odd things, start happening, like all my screens will dissappear and I have to click on app to 'show' then as quick as it started it will stop.  Run MacPilot/Onyx, no change.
    Wireless keyborad, 27" i7 chipset, 2.8 Ghz,12 Gigs RAM

    when I type symbol font appears on screen (Safari, Mail, Firefox text boxes) and browswers fail to work properly (click on reply and browser tries to download), reboot will temp fixe, new keybord fixed it but it now back?  driving me crazy..virus???  When this starts up iMac does not work properly, odd things, start happening, like all my screens will dissappear and I have to click on app to 'show' then as quick as it started it will stop.  Run MacPilot/Onyx, no change.
    Wireless keyborad, 27" i7 chipset, 2.8 Ghz,12 Gigs RAM

  • Changing font / appearance of Fill-in-the-blank questions

    1) I am using a Fill-in-the-blank question. I can change the
    font of the name and the description, but not of the Blank Answers
    themselves. I figure this should be possible, since these are
    basically text entry boxes (or drop down lists if you select the
    list option). Is there a way to do this? Perhaps an option I
    missed, or with a Javascript code that modifies some system
    variables, or some other way?
    2) Also, how can I get rid of the numbering in front of the
    Blank Answers that Captivate generates? Is there a way to do this
    (an option I missed, Javascript, or whatever)? I even tried to
    cover them up with a highlight box, but Captivate does not allow me
    to bring the highlight box in front in z-order.
    Surely, you wonder why would I want to do this, especially
    #2. One really useful example would be to embed the Blank Answers
    in the Phrase itself. Example:
    The <1> and the <2> are the two longest rivers on
    earth.
    1. __________
    2. __________
    By adding some blanks in the Phrase and moving around the
    Blank Answers, this could be turned into:
    The __________ and the __________ are the two longest rivers
    on earth.
    I would think that many would consider the second version
    more appealing.
    In addition, this would open other possible uses for
    Fill-in-the-blank questions. For example, consider a table or
    spreadsheet like setting where each Blank Answer is actually a
    cell. The user fills in the cells, and all entries are evaluated
    when the user submits.

    I guess the best response would be generate the
    Fill-In-The-Blank question as Captivate requires. After it creates
    the questions slide, double click on the text box you wish to edit.
    For example, when you publish your question "The <1>
    and the <2> are the two longest rivers on earth.", this will
    appear as a text box on the screen. Double click it to edit and
    change "<1>" and "<2>" to "___________".
    You should also be able to edit your answer boxes in this
    manner as well.
    HTH
    Jim

Maybe you are looking for

  • Can photo albums be viewed on iWeb blog if you don't have 08?

    Recently tried to create a blog with a couple of my photo albums on it. Unfortunately I am having some trouble doing it. I hope don't need the new iLife to do that task. I tried to click and drag he photo album from I photo onto the iWeb blog page...

  • Problems with LENS CORRECTION Photoshop CS5

    Hello I get up the dialogue box AUTO CORRECTION. But I cant acitivate CORRECTION (geometrical distortion, chromatic aberration and vignette). I cant press it, its is gray. I have filled out everything as I have always done it. I have never had this p

  • What printers are compatible with Mac Book Pro's?

    Hi All, Just looking to buy a printer for my Mac Book Pro but I don't know which ones are compatiable... Any suggestions or do you know where I can find a list of compatible printers?? Thanks

  • Will hooking up my iPhone to iTunes and "Transfer Purchases" also transfer my music?

    If I deleted all my music files, but the library still has the tracks (with the '!' symbol) and I transfer purchases, even though not all of them are purchased but ripped from CDs and such, would that restore the missing files? If it doesn't is there

  • Documentation for AUTHN_FAIL reason codes?

    Hi: I'm working on some BI Publisher reports that work on audit records and the eventtype is AUTHN_FAIL and there is a "reason" column with the records. The Reason is an integer value like 37 or 40 etc. I assume it is OAM that defines what these code