Question Mark Folder?!

Hey all (im posting this for a friend, as you can see i use a MB)
Well from what he was saying is that he just got the Question mark folder. He was working on it and it froze with the spinning beach ball. He closed the lid and it didnt go to safe mode so he held the power button to shut it off. So he turns it back on and it comes back, the folder so he turns it off and on and tapped hard lol underneath it and it works. He wants to know if his MBP is dying. He also dropped it before and after he turned it on the folder showed up.
Its this fixable or will he have to get a new MBP?

It's too soon to conclude that the MBP is dying, but it looks like it's having trouble finding its startup disk. Here's the place to start:
http://docs.info.apple.com/article.html?artnum=58042
Try all the steps in the article and post back if you don't get it working again.
Also, it wouldn't hurt to open Disk Utility after he gets it working again and verify and repair if necessary both permissions and the startup disk. Also, check at the bottom of the DU window and make sure that SMART status is verified.
Please post back if you need further clarification.
Good luck!
Message was edited by: S.U.

Similar Messages

Flashing Question Mark Folder on Start-up

I recently starting having administration issues with my Mac Mini.
I went to update to OS 10.5.7 and when the administrator box came up asking for my password, my name was missing. After putting in the correct information, was unable to update, but received the message what my clue to password was.
Anyway, I performed a safe startup, changed the password and tried again. Same issue as before. So I started up from the Start Up Disk, and ran Disk Utilities and verified the disk and repaired any permission issues. When I started up my Mac Mini from the hard drive, I still did not have my administrator password working.
At this point, the start-up ping is gone.
I reset the Pram and had the same issue. So, I saved all important files to an external hard drive and tried to do a clean install. I was unable to do the clean install.
I removed the hard drive from my Mac Mini and installed it into a friends Mac Mini. I had complete control of my computer with no administrator password issues, the ping was there, and I could reload all saved items and still not have any issue no matter how I started up the computer. I then performed a complete erase and reinstall and still had no problems.
I reinstalled the hard drive into my Mac Mini, and I now have the Flashing Question Mark Folder with gray screen on start-up and no ping. Can't fire wire to start up, can't clone, can't start-up from disk, safe mode, etc..
Any ideas would be helpful. Most likely I will be going to the Apple Store and seeing what they can do.

generally, the flashing folder mark means it can not find the startup drive.
if you hear those kind of noises your hard drive is most likely dead. while this is almost certainly true you can try booting from the install DVD and see if the drive is visible in disk utility. if you can't insert the DVD try this. reboot and hold option at the chime. this should boot you into startup drive manager. there you should be able to insert the DVd and choose it as the startup drive. boot from the DVd and once past the language screen start disk utility from the Utilities menu at the top. see if it detects the internal drive. if it does, try repairing it. if it doesn't the drive is dead.

Boots to flashing question mark folder and disc utility cannot locate internal hard drive

Bottling my MacBook Pro I end up with a flashing question mark folder. I reboot holding the option key to select discs and there were no options at all. I plug in an Ethernet cable and it shows a internet recovery option. I click and it downloaded a temporary recovery mode. From there I open disc utility but it doesn't find any internal hard drives. I reset the pram and I still get the flashing question mark folder. Thinking it was my internal hard drive that failed I bought and replaced the internal hd with a new one and repeated all the processes and still no internal hard drive was found. I'm stuck with the flashing question mark folder. Therefore I've concluded that it was my MacBook pros internal hard drive CABLE that had failed. Does anyone know of any other possible problems that is causing this for my MacBook Pro or know of any solutions? Or is replacing my internal hd cable the only solution? Please help!

It was the internal HD cable. I replaced it and now my MacBook Pro works

Flashing Question mark Folder and clicking - no start up.

Dear Mac Users,
I've already got some info on the above, but my 3.5year old G5 iMac wont get past the flashing question mark folder icon. It can't find the start-up drive. The think the hard drive is dead - if I start up from external HD it's OK and/or Tiger CD - but the mac's HD is nowhere to be seen on any disk utility.
Just bought Disk Warrior - that wont see the iMac HDrive either - so unless anyone has got a fix, it looks like the thing will be dumped or I get a new HD. Are these easy to buy and fit? It's a Rev A model, (the buzzy first edition). I haven't got all my files backed up, just the key ones, which are now on a new alum iMac. Or I could run it off an external drive (noisy, though).
I had been moving the G5 around a lot (switched off) before it went belly up - could this be a cause?
Maybe it'd been feeling left out, with the new 24in installed.
Hope someone can shed further light.
Rob
(PS - anyone want buy my Disk Warrior?)

Your drive is dead, you can look in [macsales.com] or [smalldog.com] for a new new one. The drive isn't too difficult to replace, you can do it yourself, and do get the largest one you can afford, just make sure it's a 3.5" SATA.
Keep your DiskWarrior, you never know when it'll come in handy.

MacBook Pro hard disk upgrade shows question mark folder

I recently bought a 1TB hard disk for my teenaged daughter's MacBook Pro.
I formatted it, used Carbon Copy Cloner to clone the existing drive. I even made sure to create the recovery partition.
I restarted while holding the option key and chose the new drive. It booted fine so I checked in System Preferences to make sure it was selected as the boot device.
I opened the case and swapped the drives. Put it back together and restarted only to see the question mark folder!
I tried booting while holding the option key and now I get the choose a network prompt.
I am desperate and hate the thought of disappointing my daughter. It used to be that I was her hero who could fix anything now I'm the guy who asks too many questions and doesn't put enough money on her debit card. Granted she busts her butt getting awesome grades and I was upgrading her drive so she could continue her video yearbook for her school. So I shouldn't complain but it would be great to be her hero again.
BTW, I am not a newbie to the tech world but I don't do nearly as much in the Apple arena as I do in the PC world. Then again I've been a senior tech in the industry sine before IBM had a PC. In fact, my first real work was on a 6502 processor that used the same machine code as the Rage of the day, the Apple ][. All that to say I usually can find my way around a problem but this one has me stumped.
I appreciate any assistance offered.
Thanks,
Thom

I tried to reboot with the option, command P. And R keys pressed. I heard the ding several times it still showed the question mark! I also tried the shift option and it only displayed the network selection. Also I tried to press C so I could boot from USB and it didn't work either.
If I cannot get this to work I fear my only other choice is to use a FireWire enclosure. This isn't a good option as my daughter does mostly movie work and iMovie has this terrible "feature" that forces all movies to be stored in one place. It sure would be handy if it allowed movie projects to set the storage location individually. I suppose I could simply move all the movies to the drive and try to find a way to point all iMovie projects to the external drive.
Unfortunately, my daughter is one of those Mac users who isn't savvy enough to use anything but the default settings. Heck I've tried to explain to her that she ought to get rid of the big files once she has done her work. That's why her drive is always full.

Frequent startup with question mark folder icon--a diagnostic challange!!!

I recently obtained a 500 mhz G4 Cube; I transplanted memory, video board, video riser board, and DVD/CD drive from my old (dead) 450mhz G4 Cube (logicboard and DC-DC board were fried) to the 500 mhz Cube AND I added a Western Digital 80gb hard drive. The problem involves frequent startups with the question mark folder (Mac OS logo alternates with question mark).; Eventually the system folder is found and OS 10.4.11 starts up--sometimes in 20 seconds and sometimes in 3, 4, 5 minutes or longer..........I have tried 2 brand new batteries after numerous PRAM (via keyboard) and CUDA resets (depressing the CUDA button on the motherboard just once and then installing the new battery). The battery terminals in the Cube look perfect--no corrosion. With the new battery, startups were fine for a day but now 4 out of 5 times, I will get the question mark folder. Using Disc Utility, I fixed any errant permissions and the hard drive checks out with zero problems. Once running, the Cube works great, but these startups are maddening. One other issue; if I start up with the G4 Cube 9.1 installation disc, the install program DOES NOT recognize any bootable discs; whilst starting up using the Tiger Upgrade install disc, my 2 bootable discs (partitions of my Western Dig. hard drive) ARE recognized. Any ideas would be greatly welcome!!

I believe I have solved the problem regarding the question mark startup---> after rechecking all cable connections to HD, OD, and logic board, I revisited the jumper setup on the HD; it turns out that I set the HD up to be the MASTER, but what I should have done was set the HD to be the MASTER with attached SLAVE. Since reconfiguring the jumper, all startups have so far been normal. Also, I did install OS 9 drivers, but I the OS 9.1 install disc still does not recognized my 5 gig partition when starting up from the CD; this is minor in retrospect as I can still use the classic mode with a earlier version of OSX that does not hog so much disc space.

My Mackbook won't boot - Question Mark Folder

Hi Everyone,
I've got a problem and I don't know how to fix it for the life of me. Last week my friend was trying to delete a program using the terminal. He looked it up online and found detailed instructions on how to delete it but it ended up deleting everything on the HD. That's as much as I know for the back story.
Now, when I got it from him I powered the machine on and it acted as though there was a leopard installer cd in the drive (and the cd wasn't in the drive) and would load up just past the language select and fail. It would say it can't be installed on this computer. So I used command+T and tried to repair the disk but it would fail and say that I couldn't. So I erased the disk and installed 10.4 clean install. Powered off the machine, reboot and now I get the question mark folder.
It seems like the drive is fine but the kernel wont see the drive. I believe the drive is fine because I can select it and boot from it with the other mac I have (g4 1ghz) while the macbook is in target disk mode.
I've tried zapping the pram a few times, taking out the battery and holding the powerbutton for three secs, holding command+s or v (single user and verbose modes dont start up at all), holding shift, holding x, while starting up and nothing works.
Can anyone help me!? I'm a freelance designer and I can't function without this thing.
Thanks in advance!!

It means critical system files have been corrupted or damaged. You need to reinstall OS X:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Macbook pro flashing question mark folder, won't recognize hard drive

My 2010 macbook pro froze and after restarting I was greeted with a flashing question mark folder. I then restarted again and held down "option" key and went into Mac OS X utilities then into disk utilities. In disk utilities, my only drive options are "superdrive" "disk0" and a subfolder of "disk0" labeled "Mac OS x Base system". My hard drive is no where to be seen. I also tried to install a new hard drive but the same thing happened, the computer could not recognize that there was a hard drive present. What can I do to fix this??

Hi bigdubee,
The exact same thing happened to my 2010 MacBook Pro today. Restarting with the "option" key held down, I get only 2 of the 3 options you listed in disk utilities ("disk0" and a subfolder of "disk0" labeled "Mac OS x Base system".
Did you take your Macbook Pro to the Apple store? And were they able to fix it?

New Hard Drive still have Question Mark Folder

So I first got the 'Question Mark Folder' and had to keep running Safe Boot Mode to use computer. Finally got around to replacing the Hard Drive, but this Question Mark Folder still comes up trying to turn the computer on and now trying to setup the new hard drive. Won't let me do anything. I've tried all of the button combos/recovery mode/etc. Tried inserting both a backup disk of Mavericks and Snow Leopard, nothing. Is there any other problems that could cause this? Maybe a dead SATA cable? or something else small hopefully?

My newest Mac just did the same "folder of death" dance. It's too late for you now, but you might consider a passport backup drive.You can get 2&3 T-bytes now fairly reasonably priced. A given with computers is they will crash, just a question of how bad and when, so you can be prepared for the next time.

Hard disk in mums macbook failed, bought a new one, formatted it first. Have tried starting it with every possible key and I either get flashing question mark folder or a cursor.

Hard disk in mums macbook failed, bought a new one, used sata adapter cable to format it for mac first. Connected it and have tried starting it with every possible key combination and I either get flashing question mark folder or a cursor. A disk is stuck in it so I can't boot from OSX, and yes I have tried every option of starting to try and eject disk but none work. HELP ME!

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
If you have a 2010 MBP or later, then you can use Internet Recovery. Start by rebooting the computer. At the chime press and hold down the COMMAND-OPTION-R keys until a Globe appears in the upper part of the screen. This process can take upwards of 15 minutes to get connected to the Apple network servers. You should eventually see the utility screen of the Recovery HD. You may now go about the process to install Mountain Lion:
Install Lion/Mountain Lion on a New HDD/SDD
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

TS2570 i have an intel imac and im getting a grey sceen. I get the flashing question mark folder. iv changed the H.D 2x and tired to install a new os into it but no luck. The mac isnt going into safe mode or anything. help?

Intel imac 2009. Grey screen with question mark folder. Changed harddrives 3 times now. Tired 5 keyboards on all Usb ports and a hub and keyboard wont boot to startup or safemode of anything but hub gets power. disc drive wont eject or accept a disc cuz keyboard commands not being sent to computer. Help?

Keyboards must be connected directly to the USB port, not through a hub.
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Question Mark Folder Problem (Already replaced hard drive)

On Sunday night I found my macbook pro ("13, mid 2010, refurbished) in a frozen state a few seconds after waking it from sleep. So I did a forced restart and then my macbook wouldn't boot (blinking question mark folder). I troubleshooted with the OSX Install DVD on my own before taking it to the Genius Bar (disk utility & TDM could not find the hard drive), and we both came to the conclusion that I should install a new drive. So yesterday I bought a new drive, did a fresh OSX install and managed to migrate all of my info from my presumed damaged drive to the new one. Everything went smoothly and the computer was in working order all night. That is until this morning when I shut it down before bringing it to work. On my lunch break I decided to fire up my newly upgraded macbook only to find that it once again would not boot, still with the blinking question mark folder. I also tested to see if I have faulty RAM and it doesn't look like it (unless both sticks are fried). This is becoming incredibly frustrating and I hope I don't have to replace a board or anything like that. Anybody here have suggestions? It'd be greatly appreciated.

Could be something as simple as the hard drive cable...the hardware test won't identify this. Have an Apple store nearby? If so, make an appointment. If it's a bad cable, the fix is easy, but not free unless you have AppleCare.

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

I need to reinstall lion OS on my MAC mini. I have the 'question mark folder'.

It is a mid 2011 mac mini. It boots to the 'question mark folder'. I installed lion server over my lion OS. After trying to remove the server app unsuccessfully, I id a command-r boot and erased the Macintosh HD where my OS was wiht the intention to reinstall. THe on-screen instruction I thought said I had to reboot after to use the recovery HD so I di. Now when it boots, it jsut goes to the 'question mark folder' and does not load. I only have the bluetooth keyboard so will the mini recognize the command-r on boot? It doesnt appear to.
Thansk for any input,
Ken

Had the same problem w/ a Mac mini server. The only thing that helped was not the timing, but a disconnection of all cables from the machines: power, keyboard, etc., and a wait of one minute which according to Apple support - resets some config on the machine. After I did that, Command R worked just fine.
BTW, According to Apple, you have to hold Commmand R just after you hear the chime, and keep holding it until you see the recovery utility. Another alternative can be holding Command Option R for network recovery.

Persistent Flashing Question Mark Folder Icon, after Repair & Rebuild-THX!

Hello All,
Thank you in advance for any insights.
For the past week, one/two days after a force re-boot, my Quicksilver Mac (OSX 10.4.11 and OS 9 Classic) starts up with the dreaded flashing question mark folder.
The start up disk has always been on "Mac OS X, 10.4.11 on main stuff" ("main stuff" is the name of the hard drive.)
The first time, I ran DiskWarrior and rebuilt the hard drive, which is kind of new as it was replaced in April 2009. Then I ran OnyX and got a clean bill of health. The Mac was shut down at the end of the day as is my habit via turning off the power strip.
If it helps, here's part of the DiskWarrior report:
• 13 files had a directory entry with an incorrect text encoding value that was repaired.
• 340 files had a damaged extended attribute that was repaired.
• 3 folders had a directory entry with an incorrect custom icon flag that was repaired.
• Incorrect values in the Volume Information were repaired.
Disk Information:
Files: 370,719
Folders: 85,161
Free Space: 92.55 GB
Format: Mac OS Extended (Journaled)
Block Size: 4 K
Disk Sectors: 268,171,472
Media: WDC WD5000AAKB-00H8A0
The next day, the flashing question mark folder reappeared. This time I used the original system installer CD (labeled Power Mac G4 OS X Install). Disk Utility made its repairs. And this time, the computer was put to sleep instead.
In the morning, it woke up, the wireless optical mouse worked for a few seconds, the hard drive is humming along then all of a sudden the arrow (mouse) froze and none of the keys on the keyboard functioned.
After some research, I deleted the energy saver preference (powermanager.list?) and ran Disk Utility again. And again, I shut down b/c I wasn't going to use the Mac for a day or two.
This afternoon, the pesky icon reappeared at start up. At first Disk Utility didn't see the hard drive then I restarted and the hard drive was selectable though not mounted. It was repaired and verified yet once again. Btw, when I did hard drive test, the message says something to the effect that it appears to be working properly.
My question is, might anyone know what's wrong? I've been backing up after every use and I have a laptop. But I love working on the desktop and if this issue can be fixed, that would be perfect.
As an aside, I've read that I should do a clean install. Would doing a clean install mean I need to re-install OS 9 as well as all other all other software programs-Adobe Creative Suite, Quickbooks, Verizon DSL, printer drivers etc.?
One final question, can I continue to boot up from the CD, repair then restart or will I damage the computer? Once it restart, everything seems to work normally and well.
Many, many thanks for reading and any help would be greatly appreciated!
Have a wonderful weekend.
Sam

Disk damage can also affect the startup sequence, but I think what you have already done should have repaired any disk damage, or given you more information.
Once you have ruled out Disk damage, you get the flashing question mark when your Mac cannot find:
• the preferred operating System
• of the preferred version
• on the preferred startup drive.
All these items are stored in the parameter RAM, backed up by a 3.6 volt, non-recharging 1/2-AA size battery that lasts three years or so, unless you turn off all power at night.
If you cannot remember when you last changed that battery, now is a good time. Be sure to reset the PMU/PRAM after installing the new battery.
Message was edited by: Grant Bennet-Alder

Question mark folder at startup, safe boot not working

Last night my iMac froze up, Force Quit didn't work, and I used the Power button to shut it off. When trying to restart, it was getting stuck at the grey Apple.
I tried unplugging the peripherals and restarting; zapping the PRAM and restarting; safe boot and restarting. Safe boot did it.
I then ended up going through those steps a few more times as my iMac starting freezing up again. One of those times I changed all my applications in the dock that were set to launch at login to not do so, wondering if that was somehow causing a problem. I also took a folder of recent items I'd created, mostly a LOT of PDFs of newspaper articles, burned it to a DVD and deleted the folder to free up more memory if that was part of the problem (I'm running out). I then restarted from the Apple menu and it shut down through safe boot and then restarted without safe boot and did so just fine. I ran Disk Utility and very few if any permissions needed repairing. And it was operating OK for a bit and then froze up again.
Now I'm getting the question mark folder at startup and safe boot isn't working. What should I be trying next? Lion Recovery with Command-R? I'm relatively new to Lion, but it had been working OK for me for a while now.
What other things should I try? Would Target Disk mode possibly work from the MacBook I'm using now, which doesn't have Lion installed?

The question mark folder usually means that the
firmware could either not find a valid operating
system to boot, or, it could not find a hard disk
with an operating system on it.
Have you tried booting to Lion Recovery? If
you can, then go into Disk Utility and do a
Repair Disk on your OSX volume. If the
OSX volume is not showing up, you may need
to do a reformat and re-install.
Since it is a 24" iMac (from your description) it was
a pre-Lion Mac. If you still have the original install
disks, try booting with it and use Disk Utility from it
to see if the hard drive is working.
Try this first before making a road trip.

Question Mark Folder?!

Similar Messages

Maybe you are looking for