Question mark on startup following Leopard Install and

hi there,
I installed leopard on my girlfriend's intel white macbook yesterday. i did all the updates, except I didn't perform the keyboard firmware thing (i did donwload it, but after rebooting when it asked me to connect the computer to a power source, i simply quit it cause I had to leave the house in a hurry). I remember that I also deleted the previous system folder, which I believe its okay since all the apps were on the new applications folder, so I assume the folder I deleted refers to the old Tiger system.
She just called me now saying that her computer won't boot and a question mark appears flashing and won't go past that point.
updates
I told her to put the installation DVD on the drive and press C, which she did. I then asked her to go to disk utility to perform a disk repair. guess what ? hard disk ain't there. I've experienced problems in which the disk was not found and turned out that the disk wasn't dead at all so I'm not assuming right away that the disk is gone for good.
im not home right now so I won't be able to help her till I get there, but I'd like to know your opinion on this. Thanx a lot !
Ricardo

so, i have the faulty computer with me. Tried booting from DVD, the hard drive is definitely not recognized. ive tried using pressing D on startup to access the apple hardware test thing to no avail. My last option would be trying the Disk Warrior and/or TechToolPro and probably taking off the hard drive and putting it back again. maybe it's not well attached, although I don't see how it could come off like that, the computer has fallen (!!) twice (!!!!!) during its 2 year life and apparently didn't affect anything, nor even on the outside of the computer. maybe these are the side effects, i dunno...
btw, i tried the firewire target mode thing and the disk didnt come up on the host computer's desktop.. i guess that says it all..
Message was edited by: Riquier

Similar Messages

Macbook Displays Flashing Question Mark on Startup After Leopard Upgrade

Hello, I have a first Generation Macbook that I tried to Upgrade to Leopard. I put in the install disk and everything went smoothly until I checked on it an hour later and it said "Install Failed" without specifying a reason and it asked me to restart. So, I restarted with the disk in and then the installer claimed it couldn't locate my hard drive. I popped out the disk and now all I have is a flashing Question mark on my screen. I know there is a help article related to this, but I was wondering if there is something different due to this being a result of an attempted Leopard Upgrade, also I was wondering If I do put in the OSX Tiger Disk that came with my Macbook and re-install it will it erase everything I had on the computer?
Thank You Any help is Appreciated!!!!!!!

The Tiger install discs will need to erase your hard drive to allow for Tiger to be installed.

My MacBook Pro (15-inch Mid 2009) question mark on startup

My MacBook Pro (15-inch Mid 2009) has a question mark on startup.
I brought it to my local apple service centre and they told me that after a few tests it was the hardrive, so they changed it under-warranty. Back home I started re-installing my system and got again a question mark on startup.
I decided to put the hardrive in a FW800 external enclosure and boot my system this way and the computer started without any problem. I reinstalled the hardrive in the MacBook Pro and again got a question mark on startup.
I decided to buy another drive, Seagate momentus XT 500Go, transfered all my files in this new drive and I installed it inside the MacBook Pro, still the same question mark on startup. I installed it again in my FW800 external enclosure and everything worked fine.
I decided to installed it again in the MacBook Pro, load the computer via the original Mac OSX install DVD, load the system and try to install a new fresh one on the hardrive... no hardrive were found....
So I decided again to bring it back to the same local service centre, and they told me again it was the hardrive the problem... but they don't want to listen to me when I told them that all my hardrives can startup the computer via an external enclosure....
So I would like your help, I think the problem come from the cable that linked the HD to the motherboard or the SATA chip inside the motherboard, but they don't want to test it !!!!
Thanks in advance for you help, I have been without my computer since 2 weeks now and I can't afford working without it any more !!!
Sincerely
bosa30

You need to take this computer to a real Apple Store. Or call AppleCare. Obviously this "local serve centre" doesn't have the skills to deal with your issue.
I'd also check your RAM, as an easy first step. But I think the HD controller in your Mac is bad, since you can boot from an external drive.

I erased my HD and could not install lion. if I turn on the mac now all I see is a folder with a question-mark. How can I install a new operation system?

I erased my HD and could not install lion. if I turn on the mac now all I see is a folder with a question-mark. How can I install a new operation system?

Install or Reinstall Mavericks, Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

Get a folder and a question mark on startup

I get a gray screen with a folder icon and a blinking question mark on startup. Is this bad?

It's certainly not good! A flashing question mark appears when you start your Mac. Usually, the only workable solutions is reinstalling OS X. What version of OS X do you have installed?

Blue screen with flashing folder and question mark on startup

Hello.
I need help with my Macbook Pro. I get a blue screen with a flashing folder and a question mark at start up. To date I have tried the following:
Apple Hardware (Extensive) Test (Results: "No Trouble Found")
Safe Boot
Reset NVRAM
Reinstall OS X via the internet (I received no discs when I purchased it). I select the StartUp Disk to reinstall. When reinstalling via the internet I get to a point of reinstalling Mountain Lion but it asks me to choose a drive - yet there are no drive options to choose from. Then a window comes up asking me to "Select the system you want to use to start up your computer" but no options appear. When I choose "Restart" a note pops up saying "You can't change the startup disk to the selected disk. Startup Disk could not gather enough information on the selected disk."
The only option is "Restart" from the Apple menu. When I choose that it goes back to the original "Blue screen with flashing folder and question mark on startup."
I have no Time Machine
I can't access the disc utility.
Are there any ideas as to what might be the problem?

Your hard drive has likely failed and needs replaced. That would explain why the system does not display it when you attempt to reinstall the OS via Internet Recovery.

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. Does any one know how I can get it to recover?

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? Thanks

I just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me..

I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

I have replaced my ibook hard drive but when I start up I get a folder with a flashing question mark. I have tried installing the OSX disk using the "C" key but can't get any further than the flashing "?." What do I do? What is the problem?

Which iBook do you have?
http://support.apple.com/kb/HT1772?viewlocale=en_US
Which version of the OS is installed, and which version are you trying to install?
You could try starting up with Startup Manager and see if it will allow you to select the OS X install disc as the startup disk. If so, maybe you can proceed from there. I would recommend repairing the hard drive first since you are evidently having a bit of a problem with it.

Flashing Folder/Question Mark on Startup

I have been having an issue with my machine for the past couple days, and cannot find the Install Disks to remedy this situation (my OSX 10.4.4 disks will not recognize), so ANY help would be appreciated.
I have been able to troubleshoot using FireWire target disk mode. I've run DiskUtility and DiskWarrior on this machine from another machine and everything checks out with the hard drive, but I keep getting the Flashing Folder/Question Mark on Startup. Safe boot (Shift key at startup AND Shift-Command-V) do not work. Resetting the NVRAM / PRAM does not work.
Suggestions?
I don't need the info on the machine, as I am trying to set this up fresh for my wife.

But I was going on the assumption, as it was an internal drive (not an external data only drive), he had an OS installed, since his problem seemed to be that out of the blue he was getting the flashing folder question mark on startup. He had written +"I have been having an issue with my machine for the past couple days...."+ implying that it had booted normally before that.
Anyway, you're probably right; I'm just puzzled: how would his once bootable OS disappear just like that? Obviously something I'm not understanding here.

A flashing question mark on startup

My Mini is displaying a flashing question mark after startup. How do I fix it?

The flashing question mark indicates that your Mini cannot find a valid startup disk. Restart with the Install disk in place and hold down the C key and the Mini will start up from the CD. Repair the Mini's hard disk using Disk Utility on the Install CD (Look under the Apple menu). If this does not work, you may need to obtain a startup CD with a third-party recovery utility such as Disk Warrior to attempt to rebuild the Mini hard disk directory.
Here's a link to an Apple document to help you:
http://docs.info.apple.com/article.html?artnum=58042
Bob N.
Mac Mini 1.5 GHz; iBook 900 mHz; iPod 20 GB Mac OS X (10.4.5)

Mac Shows Folder With Question Mark On Startup?

Hey Guys!
I currently own a Macbook Air First Genereation (2008) running on Lion 10.7.5 (upgraded from Snow Leopard)
Recently, when I was just using the Macbook Air, the Hard disk started spinning and was creating a lot of noise well I just ignored it and gave it a hard reboot
So the next day wehn I booted my mac it was showing a folder with question mark on startup. I tried going to recovery (holding option on startup) but neither Macintosh HD or Recovery HD was being shown. I tried a internet recovery but it was not even entering Internet Recovery. I tried Single User mode, that didn't work.
I really don't know what to do now, I am panicking cause I don't have a backup and all my schoolwork is inside there.
Please reply soon and thanks in advance if you can help me
A youtube tutorial or online step by step tutorial would be great!

My tutorial is simple: pack up the MBA and charger and head for the nearest Apple store or Apple reseller. The error you see can mean three things: (1) your drive's system files are damaged, (2) your drive's directory or partition are damaged, or (3) your drive is dead. The fact that you can't boot into the recovery mode pretty much eliminates #1. It is possible that your drive's partition table was damaged but were that the case I'd expect that Internet recovery would work. So I strongly suspect #3.

Blinking question mark on startup - tried lots of things - advice?

Hi,
A friend called me yesterday about a two year old iMac. Got the blinking question mark on startup. So I went over, tried disc utility, but disc utility (off the iMac's install disc) could not even see the hard drive. So I tried TechTool Pro. Same result. TechTool from AppleCare disc, same result, DriveGenius, same result, start up in single user mode, same result, targeted disc mode connected to my MBP, same result, Data Recovery II, same result, connected a Mac via FireWire and started up from that and ran those same diagnostics, same result. None of those could even find - much less repair - the hard drive. It still shows a blinking question mark. It seems like all the hardware is working fine (motherboard, display, etc), except the hard drive. Any advice?
Thanks!
Russ Conte

The machine must be a G5, or it would be older than 2 years. And no AppleCare or it would be in the shop before this. The most likely cause is hard drive failure, as already stated. A fact of life is that all hard drives will fail or have failed.
You can deal with this, providing you can handle a screwdriver. Go to the support area of the Apple Website and click "Manuals" instead of discussions where you are reading this. In the block "search manuals" type "Imac Hard Drive". The next step is to select the instructions for correct machine, and download.
Cost of replacement drives depends upon capacity. One source is macsales.com.
A new drive will have to be formatted. Easy to do prior to installation by connecting to any Mac with a Universal Drive Adapter via a USB connection. That adapter is also available at macsales and other places.
Final step after installation is to install the OS hopefully from the original disks.
Good luck to you.

Folder with question mark on startup after using boot camp!!!

im getting a folder with a question mark on startup after using boot camp. it shows up for a second, then the apple logo pops up and OSX boots normally. i wouldnt be concerned except this folder with the question mark usually shows up when the computer cant find the startup disk or OS. so in fact what is happening is that my macbook cant find the startup disk for a second and then seems to find it. is anybody else having this problem. i dont like it and want to get rid of it. help!!

This is correct.
I wonder how it can be that in the System Preferences - Startup Disk - OS X volume can become "deselected" like it was... I had to re-highlight the OS X volume and all is well.
b
MBP & Mac Mini Mac OS X (10.4.6) http://www.therottenapple.net/phpbb

Random flashing question mark on startup

Every once in a while when my mac mini cold boots, I get the flashing question mark. Turning the mac off, and booting it back up again usually fixes the problem. I ran verify disk permission and verify disk; both came back ok. S.M.A.R.T status was always "verified". I have also booted into single user mode and ran FSCK. No problem there either.
I didn't have this problem until I upgraded to 10.6.3. Just wanted to find out if anyone else is having the same issue and if there is a way to figure out what is causing the problem.

On the face of it, this sounds like a temperature-dependent problem: when the hard drive is cold, it either isn't spinning up on the first try, or the calibration is slightly off and the Mac doesn't recognize the drive as being bootable.
When it is slightly warmer (second try) it spins up, or the calibration is now within limits and therefore it boots and now can pass all the DiskUtility tests.
If it were me, I'd make sure that I had this drive fully backed up onto another external drive -- just in case.
(In terms of it perhaps being a spin-up issue, I'll note that I have 640Gig 2.5" external that doesn't always mount when I turn it on. Generally the second time is a charm. I attribute it to the drive not spinning up.)
Just in case the issue is something else, I'd suggest going to Apple Menu > System Preference > Startup Disk and explicitly setting the drive to be your startup drive.
It might also be interesting to hold down the Option key at startup and explicitly choose the drive. Do this for a few days and see if the problem continues to occur. Holding down the Option key should give the drive a bit more time to spin up.

My macbook has question mark flashing on a grey screen and no functions, my macbook has question mark flashing on a grey screen and no functions

Hi
My MacBook has a question mark flashing on a grey screen and no functions, help?

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'llsee a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Question mark on startup following Leopard Install and

Similar Messages

Maybe you are looking for