Question mark (?) where My Boot Camp Applications used to be

I have just upgraded to Mountain Lion and therefore needed to upgrade my Parallels to version 7. However on the upgrade to Mountain Lion, the My Boot Applications Folder became a question mark (?) and I was prompted to upgrade to Parallels 7 which I have done.
I have since read that boot Camp 4.0 (which I presume is included with Mountain Lion) does not support Windows XP which I run from both Boot Camp and Parallels. I can boot OK from both ways, but have the annoying question mark in the dock.
Does anybody have any idea's?
Many thanks
Andrew

This is a function of Parallels not Bootcamp.
Drag the broken alias out of the dock and release it in a puff of virtual smoke.
Next tme you start Parallels do not launch your VM but right click on it in the VM window panel and select configure from the pop out window panel.
Click on the options button and Applications
Make sure the share windows applications with Mac and show Windows folder in dock are ticked .
Parallels will then recreate folder alias.
As for Bootcamp 4 not supporting XP this is correct, however if you created your Bootcamp partition prior to Lion/Mountain Lion you may still have Bootcamp 3.6 drivers with an XP install i know i do.

Similar Messages

Hello, can someone help me: my eMac G4 700 MHz. I can not boot it. If he starts appears on the screen, only a small "folder with a question mark." The Mac was not used 1 year. Question 1: Problem = hard drive? Question 2: Problem = PRAM battery? the What

Hello, can someone help me: my eMac G4 700 MHz. I can not boot it. If he starts appears on the screen, only a small "folder with a question mark." The Mac was not used 1 year.
Question 1: Problem = hard drive?
Question 2: Problem = PRAM battery?
the
What can I do to boot?

Restart with the Option key held down.
If the internal drive shows up, it's the PRAM battery.
If it doesn't, insert a compatible Mac OS 9 or X install disk, click the button with the circular arrow, and either repair the internal drive or install a new OS on it. If it doesn't show up in Disk First Aid(9) or the Disk Utility(X), it's either not plugged in or needs to be replaced.
(97530)

Remove windows boot camp applications

Hi there!
It might be a common question but this is the situation:
I've been using Windows for a few weeks for school. I had it installed on a partition and I used Parallels. A few weeks ago, I have restored my disk to only one, so i removed Windows. Afterwards I had Parallels uninstalled but I keep getting "My boot camp applications" in my user folder, and they also show up in Launchpad. Quite annoying!
Can I just select all the applications and remove them, or select the "My boot camp applications" folder and remove it?
Thanks!

Yes, removing that folder should do the trick.
The correct sequence would have been:
1. remove the Windows VM from within Parallels
2. remove Parallelsl using the Parallels Uninstaller.app
3. use the BootCamp Assistant to remove the BootCamp Windows partition
Stefan

Where is "Boot Camp Software Update 3.1 for Windows 64 bit"?

Where is "Boot Camp Software Update 3.1 for Windows 64 bit"??

Did you try just 3.2 update?
http://support.apple.com/kb/DL979
I find this "you need 3.0 first" then have to install year old 3.1, and only then can you install 3.2? what kind of Windows motherboard support is that?
And, you already have 3.0 installed off a 10.6 OS X DVD, and have you tried to use Apple Software Update (Windows obviously)? though I think the standalone updates are better and less trouble or problems. Download and keep them handy in case ever needed in the future too.
BC 3.0 FAQ, What's New
http://support.apple.com/kb/HT3777
http://www.apple.com/support/bootcamp/
Boot Camp: Windows 7 installation frequently asked questions
http://support.apple.com/kb/HT3986
Boot Camp Software Update 3.1 for 64-bit requires 3.0
http://support.apple.com/kb/DL979
Looks like the link to 3.1 now just goes to 3.2.

Blue Question mark where pics are suppose to be

Why do I get a blue question mark where all the pictures are suppose to be? I want to look at the different apps in the app store but I can't see them...

Was this always that way. And is this on 10.7.5 or other?

Why does my App store just have question marks where pictures should be?

Why does my App Store just have question Marks where the picture of the app should be

When you log in with a new device, Apple asks security questions and will email you to make sure it is not an unauthorized access to your account.
We are not Apple support, we are a forum of fellow users.
You can change your information anytime in your iTunes account.
http://support.apple.com/kb/HT5312

IMac G5 iSight, flashing question mark, won't boot from CD

iMac G5 iSight, flashing question mark, won't boot from CD

Your hard drive has probably died. The ? means that the machine can't find any drive to boot to.

Creating and restoring a Boot Camp partition using Paragon

I am trying to restore a clone of the Boot Camp partition that's on my MacBook Air (Snow Leopard) to My MacBook Pro (Lion).
I was told I could do this without requiring the Windows 7 installation disk by using Paragon Hard Disk Manager.
I downloaded the Paragon Hard Disk Manager on the MacBook Air in the Windows partition and followed the steps the Wizard told me. I chose back up. I successfully backed up the Boot Camp partition but noticed that the amount of disk space on the back up external drive was about 8GB, but the amount used up by Boot Camp was 16 GB.
When I went into the new computer and tried to create a Boot Camp partition, I am not able to do this without installing Windows software.
When I plugged in the external drive which had the back up on it, it just has some files and no Wizard I can use to restore the Windows partition.
So I think I've done it wrongly.
When I first started the wizard, there was a choice of making an image. I did choose this initially and a message came up and said I had done this but there was nothing else - no information about where this image was and what I should do with it. So I chose "Back up" and that is where I am.
Even if I do manage to create an image that contains everything, the operating system and the files, how can I restore that to the newly created Boot Camp partition on the other computer if in order to create the Boot Camp partition I need to install a Windows 7 disk?
It's not that I don't have a valid Windows 7 installation disk, I do but I have to call telephone support to install it because the activation is tied to the first laptop which has issues and needs to be repaired and that's why I am doing the migration of the data. And it's inconvenient to do the telephone thing because it's after hours now and I want to get the clone of the Windows partition before I send off the computer for repairs which I am supposed to do tomorrow morning.
Plus, I am not sure by using the Windows 7 installation disk and migration of data method that I will have the partition looking exactly the same as before, and that's very important for me because I do internet banking with a foreign bank and it took ages for them to set up the internet banking on my computer, and I am worried that internet banking won't work if I do not have an exact clone of the Windows partition.
I can go back again and try making an image disk but I still have the problem of using the Paragon program which is a Windows program on the Mac operating system, which I have to use when I am creating the Windows partition. Is there other software from Paragon that I am supposed to get?

Paragon didn't work for me and their support is quite lousy. I think I just threw $50 away.
I didn't need another activation key to install Windows 7 on the second computer (MBP). The boot camp installation went smoothly. Once in Windows, I downloaded the software again, Paragon Hard Disk Manager, and then chose "restore". It didn't recognize the archive I had made on the external hard drive no matter what I did. I had to give up after a few tries.
So I went to the Paragon website to look for answers in the support section.
They do not respond to emailed support questions for up to three days after you send in the question even if you are a new customer.
I am tempted to ask for a refund because they have false advertising claiming that their product works when it doesn't.
The steps are not that hard to follow if you use their Wizard and the Wizard told me that I had done everything right and that I had created an archive and I named it and everything.
When I went to restore it, nothing. I couldn't even eject the volume. Very strange.
Their FAQ on Support site is unhelpful and full of technical terminology. Nothing pertains to my problem.
I really don't want the headache. Besides if all I wanted was to do a backup I could have used the free back up and restore utility in Windows 7 which is meant to be excellent.
Another Apple Support Discussion member said they had a similar problem, a problem with the archives, and that even after working with Paragon for seven months, it was still not resolved.
After a certain period of time after you've bought the product, you have to pay $50 to get support. It's not worth the bother.
It's a German company and German companies in general are not big into service. I can tell that this is true with this company.
So having been burned, I really do not want to keep going down this path. I really just want my money back.

Flashing question mark, won't boot from CD

This is a children's emac and the 4 year old put lots of things into the trash. The clock keeps losing it's correct time (perhaps needs a new battery). I tried booting from the CD and I could get through the beginning couple of okay buttons until the install on desination disk. No volume appears. It's running panther. I get the flashing question mark upon restart. I have zapped the pram. What next? unplug keyboard and mouse? Thanks,
Anne Z

AnneZ,
Welcome to the Apple Discussions!
The clock losing the time (especially if the year is being set back) is a classic symptom that the PRAM battery needs to be replaced. The 1/2 AA 3.6v lithium battery is a stock item at places like Radio Shack or can be ordered online. Battery replacement instructions are at eMac - Do-It-Yourself.
Before trying an a href="http://docs.info.apple.com/article.html?artnum=107120" target=_blank>Archive and Install, with the computer booted from the OS X Install disc, go to the Installer menu and open Disk Utility. From the First Aid tab, you should see the hard drive in the window pane on the left; select it and click on the Repair Disk button. Take note of any errors. If erros are reported repaired, repeat Repair Disk until you either get a clean bill of health or an unrepairable error message. Post back with the results.
If the hard drive passes Repair Disk, continue with the Installer. After the restart, you'll likely need the Panther OS X 10.3.9 Combo Update. Following that, you can use System Preferences>Software Update to check for security updates. After that restart, open Disk Utility from Applications> Utilities and run Repair Permissions on the hard drive.

Flashing Question Mark & Won't Boot

My Mac Mini (Core Duo 1.67) will not boot, which is annoying considering it is under two weeks old.
I get a flashing question mark on a folder icon on startup and it progresses no further.
It does however start from CD unaided (without having to C-poweron).
Apple Hardware Tools (D-poweron) says everything is OK.
The reinstall CD starts and I can get to the part that asks me to install OS X, and/or use the disk checker. Both the installer and disk checker tell me the machine has no hard drive - it just doesn't see a hard drive as present.
Zapping the cmos (alt-command-p-r) didn't help.
I then gave up and handed it to the office IT people. They took the drive out (it appears to be a standard 2.5" 60GB fujitsu SATA hard drive, also used by PC laptops) and shoved it in a PC. The PC detects the drive and can view the contents (via low level disk diagnostic software; Windows XP itself just says "I don't do Mac filesystems, want me to format this for you so I can use it?")
IT guys think it's a drive controller failure, or a loose connection (though they can't see one) or some weird firmware corruption. We can't upgrade the firmware as the mac wont boot and we couldn't find a bootable firmware upgrade CD.
So, is this a "Back to apple" job or is there something we have not done? Also if it does go back to Apple, should I remove the hard drive. As far as we can tell the drive itself is fine and there's confidental data on it.
Thanks,
Sandy
mac mini intel Mac OS X (10.4.7)

... Both the installer and disk checker tell me
the machine has no hard drive - it just doesn't see a
hard drive as present.
All the indications are that the logic board has failed, and after discovering the drive wasn't recognised, your first action should have been to contact Apple since the system is new. Unless your work IT people are Apple authorised, having them open your system and work on it will certainly have endangered your warranty should Apple have any indication that such work was done on it.
I think your best course of action to have this resolved is to contact Apple and explain the symptoms that you see - the flashing question mark at startup, that you are able to boot to a valid CD, but reinstall of MacOS results in an error indicating no hard drive is present. They will likely lead you through a couple of basic troubleshooting steps to confirm that you have a hardware failure that can't be resolved, then advise you on your options which will to some extent depend on where the mini was bought and whether there is an authorised service provider or Apple store in reasonable reach.

Newbie question: Running Parallels from Boot Camp on separate drive

All: I'm new to the Mac world, so bear with me. I'm awaiting arrival of a Mac Pro that has two separate 250GB drives. I plan on running Parallels because there are certain Windows apps that I need to access periodically--but not enough to open up Boot Camp separately. Someone suggested the following, but I need help in figuring out how this works:
+"...install Boot Camp on another internal drive (Since you have 4 drive sleds build into the Mac) and run Parallels from that Boot Camp volume. This way you have a dedicated drive for Windows, so its faster and its not using the boot drive at all. You can boot to it natively if you really need the speed and power for gaming or just use Parallels when your in OS X."+
So in other words, if I already have two drives, I can have my main drive running normal Mac apps, and then if I need to run Windows, I install Parallels and all my Windows apps, along with Boot Camp and Windows XP, on the second drive and use it from there whenever I need to run Windows??

I don't think BootCamp allows an installation on another drive, but Parallels and other software will.
You might repost this in the BootCamp forum where there are many more users running Winders under all kinds of 3rd party software.
Here's the link:
http://discussions.apple.com/category.jspa?categoryID=237

How do you Install Win XP using Boot Camp without use of an optical drive?

So I'm about at my wits end. I'm try to get Windows XP on my OS 10.5.5 MacBook Pro. I've run into what seems to be a bit of a dead in. Unfortunately my optical drive has gone stupid on me and won't allow me to get through the entire set-up. The Mac has know trouble seeing the Installation Disc. After my partition has been created and I click start Windows Installer, the computer reboots in a normal fashion up to when you get the apple with spinning progress wheel. At this point the screen goes black and I get a "-" blinking in the top right corner of the screen. I figure it's just trying to boot from Win Install disk but it just kinda sits there. So here's my question. Is there some way to boot this Windows Installation from anything else but the CD? I luckily have an image of the WinXP CD in about 5 formats. I'm going absolutely crazy because I had just Installed WinXP not more than an hour before I ran into this initial problem but wanted to change the WinXP partition to FAT 32 as opposed to the NTSC format I accidently used. I would really appriciate any help in my dark hour.
System Info
MacBook Pro 4.1
Mac OS 10.5.5
Bootcamp 2.1
Windows XP with Service Pack 2
HL-DT-ST DVDRW GSA-S10N
System was just recently re-installed with fresh copy of a software and updates.

Kirkdan:
I really would like to help you and get your issue resolved in your dark hour as you said. I am afraid that I do not have good news for you. This is because the limitation put on by this entire process of installing Windows via boot camp.
The answer to you question to install windows from any other medium other than your built-in optical drive is a NO. This won't work since once Windows begins to install then it will not have all the drivers installed to recognize the external CD drive (USB/Firewire) and installation will halt.
Axel F.

Question Mark where Safari icon should be

I have a new macbook and love it so far, the only problem I've come across is a big one though, I have 3 accounts on my computer, all except for one of them (my account) the safari icon is now a big question mark (indicating that the file is corrupt I assume?) First I tried deleting one of the accounts and making a new one in it's place... same problem. Then I trashed the safari/question mark icon and tried to create a new one but could not find it in the finder (I searched safari, and safari.app).. Since safari is still working fine on my account (just not the others) I know it must be in there some where, but where?
Thank you so much, I hope someone can help me resolve this problem!!

I cannot find it in the applications folder on those accounts, just on the main account
Safari is supposed to be in Macintosh HD --> Applications
If Safari is not in that folder, move it there.
It should not be in Users --> yourusername -->Applications

Dashboard Widgets: All I get is blue question mark where QT should be

Hello,
I have tried installing some interesting Widgets but many of them fail to operate. If there is a QT element to the Widget, all I get is a big blue question mark and the letter 'Q'...as though I'm being told that Quicktime is needed but the widget can't find it. I know for a fact that Quicktime is on my iMac (how could it NOT be?), so what problem am I suffering from and how do I remedy it?
Thank you!
Message was edited by: ChrisNH

Well, it works even on Dialup here, no QT box.
I'm not clear on what you mean by 'Repair Permissions.' What's that?
Easiest way...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when complete.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

I am getting a blinking folder with question mark when I boot my computer, what does this mean?

This morning when I turned on my laptop, it made a weird ticking noise and now all I can get is a blinking icon that looks like a manilla folder with a question mark.

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
Or if you are running 10.7 Lion, 10.8 Mountain Lion or 10.9 Mavericks, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7, 10.8 or 10.9 partition.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Question mark (?) where My Boot Camp Applications used to be

Similar Messages

Maybe you are looking for