Question: my macbok - just opened and now a white screen with a flashing grey box with a question mark - help?
Good Evening
Have just opened my macbook laptop and shows a white screen with a flashing gey box in the middle with a question mark ?
Help
Thank you
A flashing question mark appears when you start your Mac
Similar Messages
-
i have macbook pro 13.3 inch. I am installing window 7 in boot camp manager after copying file of window upto 67% it doesn't response and i had forcely shotdown my macbook. Now my macbook doesn't open and stop in black screen with cursor blinking. Now how could i open my macbook pro.
At startup hold down the Option/Alt key and from the screen that comes up select your OS X partition to start the computer from. Then use the Boot Camp Assistant app to Remove Windows and the partition you reated for it and it will Automatically place the space you allocated for the Windows install back into the OS X partition.
NOTE:
Do NOT use Disk Utility to erase the partition that was created for the Windows install. Use the Boot Camp Assistant app again to do that. -
My 27" iMac has just come back from the workshop after having a white screen issue repaired. I restored from my time machine and now the white screen is back and I am unable to access an recovery option. It looks like its no responding to the USB ke
Thanks for your reply! I must apologise for the quality of my post. I inadvertently posted it before it was corrected.
I am very disappointed with this iMac. It is only 18 months old and this will be the third visit to the workshop. I had expected more from Apple and from their repair agents. Luckily I have AppleCare. -
Hi, I have an iMac which I just booted up and have a white screen with a blue folder with a question mark blinking on and off. Any help would be appreciated. Tommy
That means your iMac could not find a system to use for startup. That may mean the internal hard drive has become faulty, or the hard drive mechanism is fine, but the startup volume ("Macintosh HD" unless you renamed it) may have some type of data corruption that makes it unbootable.
First, you should try resetting PRAM
http://support.apple.com/kb/HT1379
and if that does not help, use this procedure to reset SMC (power management). If your iMac is from 2008, this is the procedure for Intel (not PowerPC) Macs.
http://support.apple.com/kb/HT3964
(This forum category is for "iMac (PPC)," so if this iMac is older (with a PowerPC processor), please post back.)
Disconnect all peripheral devices. When you connect it back to power, if you have been using a power strip of some type, try connecting it directly to a wall outlet, by itself (at least initially). Start up with nothing but the power cord connected, then add only standard mouse and keyboard. If it works, run it that way for a while.
If PRAM and SMC reset have no effect, you should insert your Mac OS X installation disc (for the currently installed system) in the optical drive, and restart with the C key held down. This should get you to the Installer screen, where you can run Disk Utility from the Utilities menu.
In Disk Utility, does the internal hard drive appear in the sidebar? If so, select Macintosh HD in the sidebar and go to the First Aid tab. Use Repair Disk. If an error is found, note if Disk Utility was able to fix it or not.
You can then quit Disk Utility and attempt to restart normally. -
Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick so I could put more than the fat32 4gb on, my Imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols after, mouse pointer moves but thats about it.
Have used R and cmd to get a menu up but once I choose one of the four options my mouse is rendered useless and I cant get any further, have downloaded, to another usb stick recovery disk assisstant and am trying to use that in conjunction with the lion option on the previously mentioned screen, computer was responding really slowly and has now frozen on the terms of software license agreement (maybe the last hurdle!) can anyone pleeeeeease help!!!!!??????It's likely that the boot drive is failing, or that there's some other hardware fault. Run the Apple Hardware Test.
Intel-based Macs: Using Apple Hardware Test
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly. -
my macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on. i don't know how to get it to progress past this loading page.
Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you are not using Lion, Mountain Lion, or Mavericks then use the following procedure:
Resetting your Mac's PRAM and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Hello. When I connect my imac Start, as usual, comes the start signal and then the white screen with the load signal then nothing happens. What could be the problem?
Presuming you get the chime, most of your Mac hardware is working and has passed the first part of the power-on self-test.
If the screen comes on, basic graphics is working.
The dark gray Apple is not present inside the Mac -- it must be loaded from a boot device. If the dark gray Apple appears, at least one of your boot devices has some capabilities. The flower petal/gear moves while Darwin is initializing and loading. If it stops immediately, something is terribly wrong.
When the screen turns blue, Mac OS X has loaded and your graphics card transitions to Interrupt-driven operation. LoginWindow task draws the login screen, and Mac OS X is ready for login.
What could be the problem depends on where in the process it stops, and whether the power light is blinking. -
When i start my mac and i got white screen with apple logo
when i start my mac and i got white screen with apple logo n spening round n round
Try here
https://discussions.apple.com/thread/4917686?start=0&tstart=0 -
How to fix and imac white screen with a ? Mark
I have a white screen with a ? Folder that has a ? Mark what do i do???
Likely yes, but...
Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214 -
Update to os 5.1 and now the white screen!!
hi all, I just updated to os 5.1 and now i have the white screen after 3-5 sec of the apple logo. I have tried the sleep home button pressed together but it did not help. Including when connected to the power cord. Pls help!!! thanks, a
First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
I know you said you did the Home - Sleep buttons together but did you hold it long enough to go past the red slider and on to the Apple logo? -
After what seems to be a normal upgrade to the new Mountain Lion OS X on my early 2008, 24" iMac. My iMac counted down to restart but did not turn all the way off. At the end of the count down the screen went white with a small file folder flashing on and off in the center of the screen. Also there is a ?, question mark in the miaale of the file folder. The screen responds to no keyboard or mouse commands. Request help.
My computer was doing the same as yours hinikuru but now there is a change. I turned my iMac off by the button on the back and left it off for about an hour. When I just turned it on the center Apple logo was back and soon the loading logo for the new Mountain Lion program came up. On the bottom of the logo there is a horizontal sliding bar that says the program will take 34 minutes to load. Time will tell. I have two iMacs and if this goes we'll I will install the new Mountain Lion tomorrow. Hinikuru, I was about to follow the information in one of the side bar blocks titled "More like this" on the right side of this screen when my iMac seemed to fix itself! Good luck. I think not all is lost.
-
Opens to a blank screen with the little color wheel running indicating that something is running everytime I put my mouse on page. I also cannot close the page or do anything concerning this page when the little wheel is running. This has gone on for hours. I can only close the page by doing a hard shutdown of by Mac Book Pro. Never had this happen before.
Your main library is damaged.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
MacPro doesn't start and stays on white screen with apple logo.
My mac pro does not start. It turns on because I hear the sound, Then the apple logo and progress bar appears. The progress bar does not load fully. I have done all the troubleshooting that is to be done including disk verification, disk repair, single user mode, set SMC and VPRAM. Nothing has helped. I have not backed up my files.
Hello ashmifromnolensville,
Welcome to the Apple Support Communities!
I understand that your Mac is only starting up to a grey screen with the Apple logo. I don’t want to have you complete troubleshooting steps that you have already completed, but for completeness sake, I would advise reading over the attached article and completing any suggested troubleshooting steps that you have not completed.
Mac OS X: Gray screen appears during startup - Apple Support
Have a great day,
Joe -
QT used to play .avi - now only white screen with sound
My Quicktime Pro 7 used to play the avi files no problem.
Overnight, it plays only audio with white screen (on the exact same files).
According to QT info, the files in question use WMV Image Codec.
Why the change? How can I get my movies back?Did you repair permissions & restart after the installation? If so, then check QT MIME Settings to make sure nothing has changed there.
See if VLC Media Player works in playing the .avi files. -
My 2011 iMac wont boot up and stuck on white screen with flashing folder and question mark ???
Im running Lion OS and I made update after it asks me to restart the iMac when i pressed restart it never boots again :S please help and how i can get my data back
Try starting the it by holding down the shift key (safe mode) if it starts then check your hard drive with disk utility. Also repair your disk permissions. If you are unable to start the computer try Lion recovery mode.
Maybe you are looking for
-
Can any one please help me I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them. I have tried all restoring options but no use. please help me
-
Getting Document Icons to appear in the Finder
I wanted to change the icons that would appear on the .tiff files that my Cocoa multiple document application creates. I did the following: I deleted the reference to the old .icns file from my XCode project. I trashed the old.icns file and emptied t
-
Quicktime export contains random grey frames
Lately, doing a straight Quicktime export (not Quicktime conversion) is resulting in movies with random grey frames in them, lasting about 12 frames or so each. This is HD footage, shot on the Panasonic DVX-100. This only seems to happen when exporti
-
Possible to determine who can use Email Encryption?
We are looking to license the Email encryption feature on Ironport. When our reseller asked how many licenses they mentioned that instead of licensing all my users I can license a subset of users, say a department. We would like to only license a su
-
I spend some time with The preferences in Firefox where I have been configuring, after some tweeaks it began to reload all images in previously visited web pages, one of the sites where my own: http://netsalg.biz so I know that thats not the issue, b