Question: No transaction type listed during creation new transaction

Per below screen, when I try to create a new transaction via CRMD_ORDER, but it seems blank on the type list..
Any advice what is the issue about, thanks.

Hi Peter ,
The new transaction type should be created first via spro settings and the same can be added in CRMD_ORDER transaction via navigating to settings and " Specfic" tab maintaining the newly created transaction type .Once done the button is available for the newly added transaction type and the transaction can now be created .
Also make sure in the customising while defining the transaction type it should not be set to inactive (falg should not be marked ) along with this the channel  - "GUI  CRM Webclient UI "should be mainatined for the transaction type in customising so that the same is availble in CRMD_ORDER .
Hope this will help .
Regards
Shweta

Similar Messages

  • Transaction Type List

    Hi
    Please advise if there a list with all the transactions types and their desciptions.
    For example
    Transaction Type 20 is a Goods Receipt PO
    Transaction Type 18 is A/P Invoice
    The above info is obtain from the query generator and I could check the transactions type by also selecting Journal memo , which indicates the corresponding Transaction type.
    However, I require all the list and not just the info on my system

    Hi,
    I am not sure of the link you are using to find notes. If you are a partner you can got to Solutions-> SAP Business One -> Support -> SAP Business One notes and here use the key words transaction type. It will be the 9th note on the list. Note 902807. Also when creating a message for SAP you can find the note search area.
    In the link provided in the above thread it a generic SAP note search not limited to Business One.
    Regards,
    Paul

  • Error while selecting transaction type 650 during ABAA.

    Hi Experts,
    We are facing an issue with transaction type 650 while executing unplanned depreciation posting for a certain company code not for all. The error message no. AA380. But it is working fine for other company codes.
    It has been observed that dep. area 30 is assigned to transation type 650 for that chart of depreciation and the message indicates that to be deleted as the combination is not allowed. But after removing the dep. area 30, the posting calls other transaction types 641/642/651 etc.
    Are we missing any config here for this particular company code? Do we need to do some changes for TT 650?
    A quick response will be highly appreciated.
    Regards
    Partha

    Hi Partha ,
    Please check below two configurations.
    1) Go to OAXE check the transaction type 650 and go to details and ensure that there is Always Post check box selected.
    2) Go to OABU check the relevant depreciation area for which you are posting there should be a check box which needs to be selected for Unplanned depreciation.
    Hope this helps you to address the issue.
    Regards,
    Gokul

  • Limit transaction types when creating follow-up transactions

    Hi! We are operating in CRM 5. We have a requirement to only display certain tasks when creating followup document from an existing activity. Now, I thought that the copy control configuration would do the trick but I still see a big list of tasks, activities and sales transaction types appearing on the screen (as good as creating a new independent document). Can someone please confirm whether this requirement is at all possible in CRM 5?
    Cheers!
    SF

    Hi,
    We had a similar requirement. We used implemented CRM_ORDER badi and used the method ENQUEUE.
    We wrote  a logic to check the object type and process type of the transaction and also its doc flow.
    If there is no doc flow available a logic is written to throw an error message as no standalone document can be created.
    You can try implementing this badi and write a code in it.
    Also you can throw custom message if user tries to created standalone orders.
    Regards,
    PP

  • ORA-12154- during creation new database

    Hi All,
    when creating new database I I get this ora error ORA-12154 , Step : copying database files.
    Could you please help ?
    Thanks,

    Hi,
    ORA-12154:
         TNS:could not resolve the connect identifier specified
    Cause:      A connection to a database or other service was requested using a connect identifier, and the connect identifier specified could not be resolved into a connect descriptor using one of the naming methods configured. For example, if the type of connect identifier used was a net service name then the net service name could not be found in a naming method repository, or the repository could not be located or reached.
    Action:      
    - If you are using local naming (TNSNAMES.ORA file):
    - Make sure that "TNSNAMES" is listed as one of the values of the NAMES.DIRECTORY_PATH parameter in the Oracle Net profile (SQLNET.ORA)
    - Verify that a TNSNAMES.ORA file exists and is in the proper directory and is accessible.
    - Check that the net service name used as the connect identifier exists in the TNSNAMES.ORA file.
    - Make sure there are no syntax errors anywhere in the TNSNAMES.ORA file. Look for unmatched parentheses or stray characters. Errors in a TNSNAMES.ORA file may make it unusable.
    - If you are using directory naming:
    - Verify that "LDAP" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
    - Verify that the LDAP directory server is up and that it is accessible.
    - Verify that the net service name or database name used as the connect identifier is configured in the directory.
    - Verify that the default context being used is correct by specifying a fully qualified net service name or a full LDAP DN as the connect identifier
    - If you are using easy connect naming:
    - Verify that "EZCONNECT" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
    - Make sure the host, port and service name specified are correct.
    - Try enclosing the connect identifier in quote marks. See the Oracle Net Services Administrators Guide or the Oracle operating system specific guide for more information on naming.

  • How to test a new transaction type in Asset Accounting?

    Hello everybody,
    I need to explain how to test if the creation of a new transaction type in Asset Accounting was correct.
    In other words, under what condition what should be the expected result.
    The requirement was:
    Create 2 new transaction types in asset accounting in order to book various business transactions:
    -     Create a new transaction type in asset accounting in order to book the credit memo.
    -     Create a new transaction type in asset accounting in order to book the scrapping cost.
    And we make it throught AO73 transaction - Define Transaction Types for Acquisitions u2013 and OAYA transaction - Limit Transaction Types to Depreciation Areas u2013
    Many thanks in advance,
    Alvaro

    Hi Alvaro,
    I think best is you test a posting with the standard transaction typ delivered by SAP first. For example for credit memo in the aqcuisition year the standard tty is 105. If you post with this transaction type you then can check the document and you will see what line items are posted in which way.
    To create your own transaction type:
    You can check the customizing in the standard transaction type and then you could copy it to your own transaction type and give it your own name, and which you may then want to limit to certain depreciation areas via OAYA as you rightly pointed out.
    For retirement by scrapping I would suggest the same: make a posting using the standard delivered transaction types and then check the document to see how the system posts. The make the required admustments in your own created transaction type copied from the standard transaction type.
    I hope this helps,
    Kind regards,
    Brigitte

  • Create new transaction (Business Activity) and assigned to user Problem

    Dear sir,
    We already have the business activity with in T-code : CIC0, The transaction is  ZACT1 and assigned to user group1 .  It's working fine. However when I copy something from transaction ZACT1 and create to be T-code : ZACT2 . and assigned user group2.  There is the problem that when log on to CIC0 . It is the authorization from for transaction ZACT1.  WHen I go to su53
    it need to have the authoriazaiton on Business transaction type: ZACT1
    Please kindly advise.
    Thank you and best regards,
    Vimol

    When you create new transaction variant, original transaction remains as it is. During creation of transaction variant, when you go to one by one screen, screen variants are created. It uses variant name and can be see on each screen on the top.
    Once you complete trasnaction, you start using this transaction variant instead of original transaction. In SHD0, there is button on the top 'assign screen variants' which allows you to assign all screen variants created above. You can refer help file which i think has procedure to do this.

  • 7.1 Error: transaction type SMIN has already been included in the categoriz

    Hello Experts,
    I'm getting the following error while running a program AI_CRM_CREATE_CAT_SCHEMA:
    Error: transaction type SMIN has already been included in the categorization schema - SAP_SOLUTION_MANAGER_TEMPLATE.
    Please remove SMIN from application area of SAP_SOLUTION_MANAGER_TEMPLATE and then run this report again.
    Can you please advice how to resolve this?
    Thank you,
    123

    I invite the colleagues that if they do not have a solid answer to a question, please do not bother on answering it.   Even the guide does not say how to get rid of that error.  The guide on page 17 says "Please ensure that there is no active categorization schema for the transaction types listed above before you run the report".   Well, how do you do that?   Also the guide says to create a version of the schema, and release that new schema, but that still does not work.  You go into the new schema version to delete all entries related to SMIN, but even after that you still get the same error trying to run the report AI_CRM_CREATE_CAT_SCHEMA.
    I am writting all this because from the answers above:
    Answer 1, the SAP Note:  They do not mention anything about schema.
    Aswer 2 and 3.                 Already answered.  The implementation guide does not help as mentioned above.
    Answer 4.                        This error has nothing to do with copying SMIN into ZMIN.
    Please accept my complaint and do not get offended.  We all know we are trying to help one another, although it is nicer to save time getting to the correct answer faster.
    Thanks,
    Juan

  • Transaction type of sales order under Account overview doesnt appear

    Hi Experts,
    Need help, We are implementing the replciation of sales order from CRM 7 to ECC. Now i already manage to maintain the transaction types and created a link in navigation tool bar.
    Now the problem is the assignment block of sales order and quotation under account information create new button doesnt appear the transaction types i maintained under CRM->transactions->settings for sales transactions->define profiles for ERP transactions. and the sales order created doesnt appear on that assignment block as well..
    Any suggestion or ideas is welcome.. thanks in advance
    best regards,
    etrafanob

    Hi Etrafanob,
    New button on sales order assignement block in account overview page shows the list of transaction types which are maintained via below customizing.
    Spro->Customer Relationship Management->Define Transaction Types..
    All the transaction types which are active and defined in leading transaction category "BUS2000115 Sales" for the same Channel will be displayed.
    Not sure if defining those transaction types under erp sales order will help in this scenario..
    Hope this helps..
    Cheers,
    Sumit Mittal

  • HOW to create new transaction code in SAP

    Dear All
    Thanking you for your cooperation
    Pls help,
    how to create a new transaction code and link with the process??????????
    Thanking you

    Hi
    you can crete Transaction code in Transaction SE93.
    To create a transaction code:
    Enter a transaction code (up to 20 characters).
    Choose Create.
    A dialog box appears. Enter a short text and choose the transaction type.
    The transaction type can be as follows:
    Dialog Transactions
    Report Transactions
    Object-Oriented Transactions
    Variant Transactions
    Parameter Transactions
    In a report transaction, you use a transaction code to start an executable program (type 1). An executable program usually has three steps - data entry (selection screen), data processing (often using a logical database ), and data output (list).
    To create a report transaction, use the Transaction Maintenance transaction (SE93). Once you have entered a transaction code and short description, choose transaction type Program and selection screen (report transaction).
    When you define a report transaction, you can specify the selection screen and variant with which you want it to start.
    You can also protect the report transaction against unauthorized use. To do this, enter the name of an authorization object in the corresponding field.
    Dialog Transactions
    In a dialog transaction, the flow of the program is determined by a sequence of screens. The screens that are called within a transaction should belong to a single ABAP program, usually a module pool (type M program).
    To create a dialog transaction, use the Transaction Maintenance transaction (SE93). Once you have entered a transaction code and short description, choose transaction type Program and screen (dialog transaction).
    You can create transaction codes for Custom query;s created using SQVI also
    Thanks & Regards
    Kishore

  • Can't create a Content Type List Item on Visual Studio 2010

    Can't create a Content
    Type List Item on Visual Studio 2010

    Hi,
    According to your description, my understanding is that you want to select the specific content type in new item form.
    This is a default behavior. The "Add new item" link uses the default content type and does not display a dropdown list to change that value. This behavior is hard coded into the control and can't be changed.
    Here are some similar threads for your reference:
    https://social.technet.microsoft.com/Forums/en-US/de60f2a1-df91-4a67-a606-02a593c977b4/choose-a-content-type-when-creating-a-new-list-item?forum=sharepointcustomizationlegacy
    http://sharepoint.stackexchange.com/questions/13281/content-type-field-missing-from-new-form
    Best Regards
    Zhengyu Guo
    TechNet Community Support

  • Ordinary Depreciation - FI-AA transaction type, ECCS transation type

    HI FI-AA experts,
    What FI-AA transaction type is used for normal/ordinary monthly depreciation?  In addition, what ECCS transaction type is updated?  Is this configurable?  Is so where?  Lots of questions.
    Thanks in advance!
    Bill

    Hi,
    no problem just a question.  sounds like SAP does not generate an FI-AA transaction type during normal depreciation.  So..what ECCS transaction type is update?  I know in the other addit/retir...etc FI-AA transaction types you specify the ECCS transaction type during config.  We need to know how this works for ordinary depreciation.
    Thanks!
    Bill

  • Open follow up transaction type screen automatically after confirm account

    Hi Gurus,
    I have a transaction type Z010 for interaction record that is copied from standart 0010 transaction type.
    I define dependent transaction type SRVO that is service order as a follow up of Z010
    My requirement is to open automatically open service order screen after confirming account
    As agents must do everything vey quickly while they are on phone, it is needed urgently.
    Now they have to open Z010 interction record screen, have to press follow up button, click to clipboard and then can open the scrren of service order.
    How can we automatically open service order screen after confirming account??
    I will be very pleased if you will help...
    Thanks.

    Hi Denis, thanks for reply.
    I read it and see that interaction record is automatically created. How can it be made, is it a standard customizing?? Our interaction record is created automatically when follow up process-it is service order here- is created. First we confirm customer, then press to Interaction Record at the left hanside, then in this screen we press follow-up button, then click on Activity Clipboard, then service order screen is opened. I want to pass two steps, pressing Interaction Record and pressing follow up record, how can I do this??
    Exactly I have to define process type Business Activity for interaction record, I can't give Service Order process type directly to interaction record. Service Order type must be dependent to business activity, is it true?? If there is a way to directly giving service order type as an interaction record type, and making interaction record creation automatically after confirming, my problem is solved as very well.

  • "No transaction type is available for creating a transaction" service order

    Hi all,
    I am new in IC .
    I try to create service order or service ticket for incoming calls
    We are using CRM 7.0
    After I confirm the account I try to create service order
    But no screen displayed and error "No transaction type is available for creating a transaction" occurs
    in customizing there is a transaction type SRVO, also I copied it to ZRVO
    But here how can I define that this transaction type is assigned to this application??
    Please reply in detail steps.
    Thank you.

    Hi Rupesh,
    Thanks for your reply..
    I made a lot of controls but I can't find where I am wrong..
    My senario is, taking phones, create interaction record and create order for further investigation.
    I copied IC_AGENT role.
    I copied transaction type 0010 to Z010
    I create business transaction named ZBTP for transaction type Z010
    I made Define Transaction Types for Navigation for Z010
    Then Define Business Role -> Assign Function Profiles
    Here I assign my business transaction ZBTP to IC_BT function profile
    But when I connect tot the system with user having this business role
    I can create interaction record with type Z010, it is ok.
    When I press Service Order it gives this error.
    Work center id for Service order is : IC_UIU_SVO
    I copied my business role from IC_AGENT, and here this work center id was not active
    In my business role I made it active.  Is this work center can't used in IC senario
    Also how can I understand which transaction type is needed for it??
    If I know which transaction type is needed to create service order or service ticket under IC, then I will control it of course..
    I also copied transaction type TSVO(service IC) to ZSVO and do the above things for this type too..
    But nothing changed..
    Please help !!

  • Transaction type field not copied into FLAGLFLEXT or FLAGLFLEXA

    Dear all,
    I would like to run a query on the transaction types used for posting line items. (initial balance, changes on the account, ending balance). However if I look into the totals table (new GL: FLAGLFLEXT or FLAGLFLEXA) I see the field transaction types present, but it has not been filled in.
    Can anyone help me with finding a solution for this. Two possiblities:
    1. How to get the transaction type into the totals table. The field is present, why is it not filled? Customizing?
    2. How can I build a simple query from another table to see the transaction types used
    Thanks!

    The transaction type is there in BKPF, which you can use to link to FAGLFELXA. The common key is BUKRSBELNRGJAHR.

Maybe you are looking for

  • Is there a way to recover an overwritten image folder in a site root?

    I mistakenly did a 'get' of the 'images' folder in my remote site and it overwrote my local site file, which contained many new photoshopped jpgs that I had spent hours creating and had recently placed there for the site work. I am working in CS5 on

  • I can no longer get you tube on my i-pod touch?

    I can no longer get you tube on my i-pod touch 16gb? When I access you tube I get a message cannot connect.

  • How to integrate an Edge animation in a website by hand

    I created an Edge animation and published it as an .oam file.  But i need to work on the website on someone elses computer who does not have creative cloud or even Dreamweaver.   I am working there in a text editor.  What are the requirements - what

  • How to create Web Service in CRM 7.0

    Hello all, Can anyone help me with the steps/procedure involved in the creation of Web Service call in CRM 7.0. Any help is greatly appreciated. Regards, Ganesh

  • Updating pages after Template Update

    Hi folks. So I'm running into a problem. I update the template as my client wants changes. I say yes to the dialog box question "10 pages to update?". All the template files/slices/jpgs dissapear and when I open to view, I see only text/editable cont