Question nVidia Chipset Drive Package Version Number.

Question nVidia Chipset Drive Package Version Number.
Hope this question is in the right sub forum.
I have see this question asked on several Forums, but never see a answer.
How do you tell which Chipset Driver Package Version is installed on your system, other than going to the Device Manager calling up the properties for each device and record the version number and comparing it to what listed for the Drive Package version?
Roger

I agree with you Richard.
I wouldn't say super fast ram though, I buy Crucial. It is very nice ram and does not break the bank. (no heatsinks on it or any other expenses)
Maybe I offended you, Bcc, by accident. I'm just trying to help folks on these forums and I have been with the nforce since day one. I have never seen this issue happen (or anything like it) on this board.
Like my suggestion, (if that didn't work, I would have continued to work) if I couldn't disable the agp host I would have uninstalled it (the device itself) and let windows try again. It could have been an nforce package issue and not with the detonator. I wish when these problems occurred, that I had the opportunity to try and fix these very rare occurences and examine the issue at my own desk.
I see too many people jump to the conclusion that they have found the mystery bug and go tell nvidia to recall the boards and fix it. I would not try to tell you that you are clueless about computers, as I don't have any idea how well you know them. But as an experienced technical writer/helper, I'm inclined to speak to the people as if they are dumb. As you can guess, many aren't, and they think that I may be saying they are, but at least they understand the situation.
More than the majority of problems are caused by heat. Too much heat will cause funny things to start happening to your computer. Sometimes it's just the ram, or maybe the cpu that get overheated. With summer coming, it's prime time to see the 'heat' problem creep up. I'm sure this wasn't the case with your issue, but it is overlooked most of the time.
Anyway, I'm glad your happy and your problem is fixed.

Similar Messages

[nForce] K7N2G-L w/2003 Server - NVidia chipset & driver question

Hello to all... I didn't want to cross post but was hoping that someone may have some guidance regarding my post in the "retired motherboards" forum... any help would be GREATLY appreciated... thanks in advance
James
PS- I fully listed my configurations in the actual post

Thanks for the response... I will take the chance and repost my question and my configurations to this forum... thanks
I work for a small company and we have a number of K7N2G-L boards with AMD 2100+ and 512M Corsair TwinX 3200LLPT memory. The boards are brand new and even though I know this isn't the best of solutions, I wish to use them for some 2003 server systems. As you would expect for a server setup I am not overclocking anything. I am also not turning on the modem, sound, parellel port and I may or may not turn on the USB ports but for now they are all off. I will definitely use the onboard video and NIC with the idea that if they ever fail I will have some cards on hand as a back-up. I have included the configurations below for each server but my question is simply:
Which chipset version and individual items should I actually install and which video driver should I install in order to provide the most stability for 2003 Server since their is no actual WHQL 2003 release.
MSI NVidia release ???
Audio driver 4.08 (WHQL) - NO
Audio utilities 4.08 - NO
Ethernet driver 3.13 (WHQL)
GART driver 3.34 (WHQL) -???
Memory controller driver 3.38 (WHQL) -???
SMBus driver 3.38 (WHQL) -???
IDE In-the-box 2.70 -???
Installer 4.27
NVidia Unified Driver 5.1 ???
Audio driver version 4.42 (WHQL) - NO
Audio utility version 4.44 -NO
Win2K ethernet driver version 4.16 (WHQL)
WinXP ethernet driver version 4.16 (WHQL)
Ethernet NRM driver version 4.42 (WHQL)
Network management tools version 4.42
GART driver version 4.36 (WHQL) with updated uninstaller files -???
Memory controller driver version 3.38 (WHQL) with updated uninstaller files -???
SMBus driver version 4.04 (WHQL) with updated uninstaller files -???
Installer version 4.46
Win2K IDE 2.6 driver version 4.46 (WHQL) with updated uninstaller files
WinXP IDE 2.6 driver version 4.46 (WHQL) with updated uninstaller files -???
VGA Driver Version???
Thanks in advance to all...
Domain Controller 1& 2 and ISA 2004
Antec 430W True Power Supply
K7N2G-L
BIOS 4.1
AMD 2100+
512M Corsair TwinX 3200LLPT (6-2-2-2) 1:1
54x CD on IDE-1
USB -OFF
Parallel -OFF
Serial-OFF
Modem-OFF
Sound-OFF
Promise FastTrak TX2000 - PCI slot 3 (RAID 1 WD800JB 2 drives)
File Server
Antec 480W True Power Supply
K7N2G-L
BIOS 4.1
AMD 2100+
512M Corsair TwinX 3200LLPT (6-2-2-2) 1:1
54x CD on IDE-1
USB -OFF
Parallel -OFF
Serial-OFF
Modem-OFF
Sound-OFF
Promise FastTrak TX4000 - PCI slot 3 (RAID1/0 WD800JB 4 drives)
Thanks Again,
James

Display Package version number in HTML?

Hi,
My customer wants to display the version number of the apps/xx package in the HTML.
I'm just wondering if this is a good idea, i.e. the actual package contents could be overwritten, but the package doesn't change.
Also - how could that be achieved? There is a services JSP in the CRX package manager - could that be used?
http://localhost:4502/crx/packmgr/service.jsp
Thanks!

The subject line & description looks contridactory. I am assuming you are looking for package version, For that You should be able to get using jcr package api [1]. Ex:- vJcrPackageDefinition.getId().getVersionString()
http://dev.day.com/docs/en/cq/current/javadoc/com/day/jcr/vault/packaging/JcrPackageDefini tion.html

New install on new mobo (nVidia chipset): driver problem

I've just installed Arch on my new PC but, for some reason, it doesn't seem to be recognising the hardware, viz. the nVidia MCP67 chipset. Here's the lspci:
00:00.0 RAM memory: nVidia Corporation Unknown device 0547 (rev a2)
00:01.0 ISA bridge: nVidia Corporation Unknown device 0548 (rev a2)
00:01.1 SMBus: nVidia Corporation Unknown device 0542 (rev a2)
00:01.3 Co-processor: nVidia Corporation Unknown device 0543 (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation Unknown device 0561 (rev a2)
00:09.0 IDE interface: nVidia Corporation Unknown device 0550 (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation Unknown device 054c (rev a2)
00:0b.0 PCI bridge: nVidia Corporation Unknown device 0562 (rev a2)
00:0c.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:0d.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:0e.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:0f.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:10.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:11.0 PCI bridge: nVidia Corporation Unknown device 0563 (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
02:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900 GS] (rev a1)
03:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
And here's the lspci from my ubuntu install:
00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2)
00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0f.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:10.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:11.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
02:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900 GS] (rev a1)
03:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
Can anyone tell me what module I need to load (configure MODULES= in rc.conf) to get it working?
btw, here's the MODULES= stuff from my current rc.conf:
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(e1000e forcedeth slhc snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
Last edited by Shagbag (2008-09-16 17:10:25)

It boots Ubuntu fine. Arch linux doesn't complain either. I only found out about the problem when I tried to pacman -Syu straight after the install - there was no networking. ifconfig had done its job but there was no routing table. I manually added route add default gw 192.168.0.1 and edited /etc/resolv.conf to make sure I could get to my router but, again, it wouldn't work. The forcedeth module had been loaded (ethernet driver) so I took a look at lspci (details in very first post) and can see that it's appears to be an issue with the PCI bus (the ethernet hangs off the PCI bus)I ran hwdetect --modules and pasted the output into /etc/rc.conf and rebooted. Still no joy.
The mobo is an ASRock 939N68PV-GLAN. It has an nVidia chipset (GeForce 7050 NB + nForce 630A MCP SB). From my lspci results it would appear the problem is with the 630A MCP. As Ubuntu works and Arch doesn't I'm perplexed. And yes I've googled and followed what little help there is around. Nothing has worked so far. Hopefully someone will have experienced a problem with either the same mobo or the 630A MCP and they can tell me what needs to be done.
Last edited by Shagbag (2008-09-19 08:50:21)

Package version number

First of all hi to all of you!
I'm little confuesd from time to time, when upgrading my system. For example downloading firefox 2.0.0.12-x two times day by day. I assume that -x stands for build number of specific package, am I right ?
If so wouldn't be beter to place newest packages first to testing repo and after one or two days move to extra ? Somthing like that would prevent people (using only core and extra repos) from downloading same thing for 2 or more times. I think that testing, unstable and even community are the best place to test package not core and extra.
Arch is supposed to be a bleeding edge distro with newest software, I understand that. But I think it would be best to test builds for few days before they get to core or extra.
Last edited by lukslab (2008-02-15 17:00:12)

lukslab wrote:
brebs wrote:It contained security fixes - we want those ASAP.
I understand why it is crucial for some packages to be as fast as possible in extra, but sometimes few hours in testing would be enough to find out that there's something wrong with build.
There was nothing wrong with the build, it worked just fine, except for the occasional security flaw left wide open for an attacker. How exactly do you test that before putting into 'extra'?
You make it sound so easy, but have u tried to be a developer and release packages? Not everyone on the internet works at the same time, what is a normal day for you is an evening and morning for someone else.
I was gonna mention xdelta, but I see shining already did that, maybe u could offer some of your expertise to this project...

K8N Neo Platinum/Chipset Driver

I'm having a problem.
I play WOW a lot and have been using the same old 66.93 video drivers for my eVGA 6800gt with no problems. Well after purchasing BF2 it said i needed a newer driver so i got the latest ones from eVGA (77.77). Well BF2 played kind of wierd still but WOW pretty much was unplayable....it would freeze every 20 seconds or so. So then i went back and loaded up my old 66.93 drivers again....WOW worked perfectly again and BF2 was also playable.
Now i can play both games at this time, however i'm sure i'll run into another problem down the road with the old 66.93 driver, it will just go out of date eventually.
So my question is, am i having this problem because i have the original chirpset drivers that came with my K8N Neo Platinum board? Do i need to get the new chipset drivers?
its a nforce3 250gb chipset driver...but i'm not sure what version (i'm at work). If this is what i need what do i unload on my computer first before going to Nvidia's site and downloading the newest chipset drivers? I'm used to loading and unloading video drivers but i've never done a chipset driver replacement yet...a little guidence would be nice (i'm sure it's simple i just don't want to mess something up).
oh...and i also used the MSI Live Update to update my bios already so that's done.

I don't see the point in updating a graphics driver if the older one delivers all the functionality of the card. It's not like many other drivers - newer graphics drivers can make performance worse instead of better, because they may be optimised for features of newer cards. The 66.93 drivers should do the job OK. They won't go "out of date" because they will always be as old as your card. It's the card which may go out of date compared with the requirements of future games.
I also don't think a newer game should require a newer driver. The driver is to enable functionality of the hardware. It cannot add new functionality that isn't there (that's not to say that a driver can't improve existing functionality if it's written better than a previous version or includes bug fixes).
What the game can legitimately say is that it requires functionality that your card doesn't have, but I don't suppose that's your problem. It could be worth updating your chipset driver package if you don't have the latest release - you can use Live Update to check that. If it says a newer version is available (5.10 is the latest public release for Windows XP 32-bit) I would download it, uninstall the current drivers (both chipset & graphics) in control panel, install the new chipset drivers & then re-install the graphics.
But maybe the problem is unrelated to these drivers. Have you got the latest directx runtime installed? That might be what your new game needs. You can use Windows Update to check for that.

K9A Platinum Chipset Driver Issue in XP

hey, found an old copy of XP Pro in my CD's. Installed, but having some issues when I am trying to install chipset driver package. With chipset package it starts up, gets to where you choose 'Express' or 'Custom' (with custom brings up the available installs) then pops up a dialog box saying "Setup did not find a driver compatible with your current hardware or OS. Setup will now exit", then another saying "Setup was unable to complete the Installation. Try to set up your display adapter with a standard VGA driver before running setup"? My VGA driver package from Sapphire (specifically for my cards installed just fine.
Any clues as to why?
(OS is pre SP1, updated before and after trying to install chipset driver package) need help pleeeaase.

Quote from: Bas on 24-January-08, 21:42:41
Update to SP2 first.
Quote from: HyJaxLTD on 24-January-08, 14:53:57
(OS is pre SP1, updated before and after trying to install chipset driver package) need help pleeeaase.
Saying that I have tried to load the chipset package both before and after updating Windows.
Will add this to my signature just so all know that I have updated my Windows. That would probably be a great !
Mainly wondering if this will cause any problems being that I was able to get the VGA loaded for my two Sapphire cards, just don't know if that will also cover my chipset?

Basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005 and there is no Microsoft office or Excel driver installed in Production

Hi all,
I got one basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005. I wanted to know How this package works in production where there is no Microsoft office or Excel driver installed. To check that there is excel driver installed
or not, I followed steps: Start-->Administrative Tools--> Data Sources(ODBC)-->Drivers and I found only 2 drivers one is SQL Server and another one is SQL Server Native Client 11.0.
Windows edition is Windows Server 2008 R2 Enterprise, Service Pack-1 and System type is 64-bit Operating System.
We are running this package from SQL Server Agent and using 32-bit (\\Machine_Name\d$\Program Files (x86)\Microsoft SQL Server\110\DTS\Binn\DTExec.exe /FILE "\\Machine_Name\d$\ Folder_Name\EtL.dtsx" /CONFIGFILE "\\Machine_Name\d$\Folder_Name\Config.dtsConfig"
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E) to run this package. I opened the package and tried to find out what connection we have used and found that we have used "Excel Connection Manager" and ConnectionString=Provider=Microsoft.Jet.OLEDB.4.0;Data
Source=F:\Fares.xls;Extended Properties="EXCEL 8.0;HDR=YES"; and source is ‘Excel Source’
I discussed with my DBA and He said that SSIS is having inbuilt Excel driver but I am not convinced.
Could anyone please clear my confusion/doubt?
I have gone through various links but my doubt is still not clear.
Quick Reference:
SSIS in 32- and 64-bits
http://toddmcdermid.blogspot.com.au/2009/10/quick-reference-ssis-in-32-and-64-bits.html
Why do I get "product level is insufficient..." error when I run my SSIS package?
http://blogs.msdn.com/b/michen/archive/2006/11/11/ssis-product-level-is-insufficient.aspx
How to run SSIS Packages using 32-bit drivers on 64-bit machine
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
Troubleshooting OLE DB Provider Microsoft.ACE.OLEDB.12.0 is not registered Error when importing data from an Excel 2007 file to SQL Server 2008
http://www.mytechmantra.com/LearnSQLServer/Troubleshoot_OLE_DB_Provider_Error_P1.html
How Can I Get a List of the ODBC Drivers that are Installed on a Computer?
http://blogs.technet.com/b/heyscriptingguy/archive/2005/07/07/how-can-i-get-a-list-of-the-odbc-drivers-that-are-installed-on-a-computer.aspx
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi S Kumar Dubey,
In SSIS, the Excel Source and Excel Destination natively use the Microsoft Jet 4.0 OLE DB Provider which is installed by SQL Server. The Microsoft Jet 4.0 OLE DB Provider deals with .xls files created by Excel 97-2003. To deal with .xlsx files created by
Excel 2007, we need the Microsoft ACE OLEDB Provider. SQL Server doesn’t install the Microsoft ACE OLEDB Provider, to get it we can install the
2007 Office System Driver: Data Connectivity Components or
Microsoft Access Database Engine 2010 Redistributable or Microsoft Office suit.
The drivers listed in the ODBC Data Source Administrator are ODBC drivers not OLEDB drivers, therefore, the Excel Source/Destination in SSIS won’t use the ODBC driver for Excel listed in it by default. On a 64-bit Windows platform, there are two versions
of ODBC Data Source Administrator. The 64-bit ODBC Data Source Administrator is C:\Windows\System32\odbcad32.exe, while the 32-bit one is C:\Windows\SysWOW64\odbcad32.exe. The original 32-bit and 64-bit ODBC drivers are installed by the Windows operating system.
By default, there are multiple 32-bit ODBC drivers and fewer 64-bit ODBC drivers installed on a 64-bit platform. To get more ODBC drivers, we can install the 2007 Office System Driver: Data Connectivity Components or Microsoft Access Database Engine 2010 Redistributable.
Besides, please note that 2007 Office System Driver: Data Connectivity Components only install 32-bit ODBC and OLEDB drivers because it only has 32-bit version, but the Microsoft Access Database Engine 2010 Redistributable has both 32- bit version and 64-bit
version.
If you have any questions, please feel free to ask.
Regards,
Mike Yin
TechNet Community Support

Why is the difference in the Driver Version numb

Hi all,I from down load site did a down load of the SB X-Fi Xtreme Music driver version 2.5.002. After my download the Dell's Device Manager Details for the SB X-Fi Xtreme Driver detailssuggestsVersion 6.0..35Date 0/5/2007. Mine a factory installed upgraded SB X-Fi Xtreme music PCI sound card. Would this be an OEM or Not?Thanking you?Snow

Its the package version I think as ssome drivers can contain lots of different versions.Would make sense to line up all up and call it the 6.0..35 package, but only NVIDIA seems to have the common sense to release drivers in such a way (even ATI like having Catalyst releases containing a different control center version and display driver version)

Which display driver package do I need for Nvidia Quadro NVS 110m?

Hi there,
I'm new to (Arch) Linux and was wondering which display driver package I need. I have a Dell Latitude D620 with a "nvidia quadro nvs 110m".
In the Arch Linux beginners guide it says:
1. nvidia-96xx slightly newer cards up to the GF 4.
2. nvidia-173xx Geforce FX series cards
3. nvidia newest GPUs after the GF FX
Consult the NVIDIA-Homepage to see which one is for you.
But on the NVIDIA-Homepage it says:
The GeForce M series and GeForce Go series notebook GPUs use drivers that have been customized by the notebook manufacturers to support hot key functions, power management functions, lid close and suspend/resume behavior. NVIDIA has worked with some notebook manufacturers to provide notebook-specific driver updates, however, most notebook driver updates must come from the notebook manufacturer.
And they just forward me to Dell Support which obviously neither offers a linux driver nor linux driver information for the D620.
So which of the three packages do I have to install?
Are these packages open-source drivers? Do I need proprietary nvidia drivers to get full 3D-performance?
Does anybody have experience with the D620?
Although I'm new to Linux and I like the KISS idea behind Arch Linux, I still want to have all that Compiz Fusion eye candy. I also want to play a few games which need 3D performance (once I'm familiar with wine). ;-)
Thanks in advance for your help,
Blackhole
Last edited by blackhole (2008-12-14 10:22:05)

Thanks a lot.
Final question: How does Arch Linux deal with license issues? If the nvidia package includes the original nvidia drivers linked above, doesn't that cause any legal/moral problems? Like in Ubuntu for example they always point out that it's proprietary software you're gonna install when enabling the nvidia drivers.
Just wondering...

Driver version number

System Information doesn't tell me the version number of the NVIDIA GTX 780M driver on my iMac. Where can I access this information?

The version number Apple uses will likely not match any of Nvidia's official driver releases. Apple gets base driver software from Nvidia, which it then modifies heavily and implements in OS X. The verion string for the GeForce family of kernel extensions that Apple uses is 10.2.1, which can be seen by getting info on the GeForce.kext extension file in the /System/Extensions folder.

Licensing Light room. I bought the product and downloaded Lightroom as i do not have a disc drive. Serial number om box not accepted. Mac-user, latest version!

I bought the product and downloaded Lightroom as i do not have a disc drive. Serial number om box not accepted. Mac-user, latest version!
Olof Molinder, Stockholm

Serial number and activation support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Error - The version number in the package is not valid. The version number cannot be greater than current version number

whats does this error mean
i download 2008 r2 and try to open package but still getting error
Error 1
Error loading The version number in the package is not valid. The version number cannot be greater than current version number.
Error 2
Error loading Package migration from version 8 to version 3 failed with error 0xC001700A "The version number in the package is not valid. The version number cannot be greater than current version number.".

can you tell me which version it is >
i try to fix in dtexec
getting following error :
Started: 2:02:13 PM
Error: 2015-01-30 14:02:14.68
Code: 0xC000F427
Source: Member Eligibility
Description: To run a SSIS package outside of SQL Server Data Tools you must
install Member Eligibility of Integration Services or higher.
End Error
Warning: 2015-01-30 14:02:14.69
Code: 0x80019002
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution
method succeeded, but the number of errors raised (2) reached the maximum allow
ed (1); resulting in failure. This occurs when the number of errors reaches the
number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the e
rrors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 2:02:13 PM
Finished: 2:02:14 PM
i cannot upgrade original package

Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

if there's a problem with the number of installations, you'll see a message about an excess activation problem.
if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
otherwise, attach a screenshot of the error message or quote it.

NVIDIA Display Driver Version 2.9.4.2

Windows Update for Windows 2000 is listing NVIDIA Display Driver Version 2.9.4.2 under Drivers.
Does anyone know about this version? I am not having any problems with the Nvidia drivers that I downloaded and installed so I have not installed this update.

It is the version that comes with windows and will automatically install if you have a card listed within the reference file.
I usually have to chase it down and delete all the references to that version as XP will continually load that driver without any intervention from the user.
Very frustrating

Question nVidia Chipset Drive Package Version Number.

Similar Messages

Maybe you are looking for