Question of process after producing a song on logic express

Hi, so i've recorded a track using the produce preset in logic express. Now I don't know how to get it into the mastering preset for polishing and limiting using plugins. I'm not sure how to get from point a to point b. i've entered the preset and have tried to open my project but it always opens up in the produce preset only. How does one go from to producing to mastering in logic pro and also how do you apply compression and hard limiting to voals in mastering mode.
Thanks for your help in advance, the feed back would be useful.

Hi,
You will need to bounce an uncompressed stereo track of your Logic project. Then open a new logic project, from the template section choose the mastering preset and then bring in your stereo track. The Mastering suite can only be used on an audio track, not a Logic Project.
D

Similar Messages

Can you adjust the pitch of a track in the middle of a song in Logic Express?

Can you adjust the pitch of a track in the middle of a song in Logic Express? So have the first 40 bars in C minor and the last 16 in D major for example?
Thanks

Hi,
the question is what you want to achieve by doing so. Obviously, transposing is easy. Split the track into two regions. The first region is original pitch, the second is to be transposed. Select the second region. Enter the desired transposition value in the region inspector. Make sure the checkbox "no transpose" is UNchecked in the track inspector.
HOWEVER: You cannot "transpose" minor key into major key. This is because the intervals of full steps / half steps is different for minor and major. The 3rd and the 6th step is a half step in minor, while it is a full step in major. Therefor you must adjust the MIDI events in the piano roll editor to change minor to major and vice versa.
Fox

Problem importing Garageband songs into Logic Express

Hi I have spent around 4 hours looking for an answer to this problem so hopefully it has'nt been answered before apolgies if it has.
I am trying to import a Garageband Song into Logic Express (7.1) it appears to import it to Logic but when finished it reads file corrupt not a Logic File.
I followed the tutorial opened the GB song and followed the instructions on how to import but I cant import it to Logic without the above message coming up.
Any ideas?
I'm using a MacBook Pro with 10.4.9 on it.Logic is version 7.1 (Is there a known bug when importing?)
Thank you if you can help.
KB.

Hi KB,
Welcome to the forum!
the answer is within your question;
your machine needs the universal Logic express (7.2)
and your GB's probably GB 3.
That's the reason you can open the files.
If you bought version 7 "new"(from the reseler)
ask for version 7.2, as you can't buy crossgrade anymore.
(until logic sells a new one)
"You just bought diesel and your machine's not run on it"
rule number 1: You should Allways look for system requirements and software versions compability!
Cheers,
Jorge

Can't open a garage band song in logic express trial

I've been thinking about getting logic express, but I wanted to try the trail version first. When I try to open any of my garageband songs in logic it says, "Damaged Song or not a logic express song! Damaged songs might create problems and crashes!" After that box it says, "Rad Error! This is not a Logic Express song!" I would appreciate any advice on how I might fix this problem.

I'm not using a different user account than previously, and haven't moved anything. That said, I was able to solve the problem. Here's what I did:
1. Right-click and select GET INFO
2. In the INFO window, open the SHARING & PERMISSIONS panel at the bottom
3. In the lower right corner, click the LOCK to change it to UNLOCKED
4. In the pop-up PASSWORD window, enter your MAC password. The LOCK changes to UNLOCKED.
5. Click the PLUS SIGN lower left, choose the appropriate Person or User/Group (me) and click SELECT
6. The name gets added to the bottom of the GET INFO window, but with “Read only” permission
7. Click the “Read Only” selection and change to “Read & Write”
PARTIAL SUCCESS: The PROHIBIT badge is gone from the file, and instead of showing ZERO bytes, it now shows XXMB — for example, 32MB.
HOWEVER, when I tried to open the file, I got the message, “Your file has no content”.
TOTAL SUCCESS: I discovered that I had to go back a level, click on the FOLDER that contained my prohibited songs, and follow the same instructions 1-7 above. Now, at last, I can access my files in the new GarageBand!
Thanks to Hang Time and Leonie for responding so quickly to my plea for help!

Importing logic pro 6 songs to logic express 7.2.1

the question is simple: i've recorded a drumkit with logic pro 6 running on mac and i tried to import the project into my imac intel but i can only open the project, the audio files format are not AIFF or WAV.
I'm sure there is something i'm doing wrong, what can it be??
Thanks!!!

Hi, now i can't remember the format of audio files. but occurs the next:
When i open the project Logic Express 7.2.1 it doesn't find the audio files, asking me to Ignore, Search automatically or Manually, i click Manually and i open the project folder but files can not be selected, its icon is grey, like EXE files from PC opened in Mac.
I'm sure it's not WAV or AIFF but if they were SD2 i could open them.
The only solution i find is opening the project on Logic Pro 6 and Bounce every track separately (bassdrum song 01, cymbal song 04 etc...) as AIFF file. It will take me the whole day so...there is a solution????
Thanks in advance!!!

Importing Garageband Songs into Logic Express

I recently imported a song that I created in Garageband into Logic Express (I already downloaded the most recent version) and I can't hear the Audio from the song. What should I do?

Very common question. Usually means you're not routing the audio through the "output 1-2" channel strip or the core audio settings are wrong.
You can search here or on google and found thousands of forum threads about the same thing. You should find your answer easily. Also, read the getting started manual.
Logic ain't GB and requires more manual controlling to organize. This is good.

Import my old logic songs in Logic Express

One of the reasons I choose to buy a mac was because it gave Logic Express as an application. Until now I used to work with a special Logic version that came with an special Audio card, Maxis Isis studio. but this card can only work under Windows ME, that is no longer an option. I hoped Logic Express would easily import all my old work, so I could continue working on them.
But import does not work, Logic Expres 9 says I should use an older version of Logic (7.xx) to make my songs suitable for Logic 9. Is there anybody who can help me with the transfer, or has an old version of Logic for me? I need only to transform some 20 songs and can abandon the old stuff.
Thanks for helping me out
Jan Vossen
Netherlands
Alkmaar

Hey what version of Logic was it that was bunled with that sound card?
I guess you can at least try to export audio parts of your songs as separate tracks using the old version of Logic that you have. I'd recommend exporting both dry and processed audio.
As for midi parts, you can export them also as midi files and as audio (for reference to be used for editing in LE9).

Opening logic pro songs in logic express

both versions running 7.2
logic express said "file either damaged or not logic express song"
is there a way around this, like saving in a different format or something?
Thanks!

I'll take a crack at it.
I'm not 100% certain, but I don't think that LE can open LP song files. If I'm right, then the only thing to do would be to bounce each track and import them into an LE project....but why would you want to drive a VW Beetle when you have a Porsche 911?
X

How to connect songs in Logic Express 8?

I have written and recorded about 5 songs, and 3 out of the five songs I would like to be "connected" to each other. That is, I mean, the songs go directly into the next by fading in and out. Is this something I can do in Logic Express, or can I do it in iTunes? Thank you in advance.

Hi,
1st: bounce the songs (maybe to an uncompressed format like AIF)
2nd: Import the three bounced songs into logic (makes 3 regions)
3rd: Apply fades as necessary
Fox

HT201368 I got an error message when trying to import a Garage Band song into Logic Express 9.

Logic Express 9.1.8 (which I have) claims to be the most recent update.

YOu have not provided any system info, not told us what version of AE you use, your audio setting, what specifics in the audio file and a million other things. See how it may not be possible for anyone to tell you anything beyond "Your computter sucks!" ???
Mylenium

Why does my iPod Shuffle stop working after a few songs?

I had my iPod Shuffle for about a month now and it's already causing me trouble.
I would play a couple of songs, but when I go to change it, it stops working. I turn it off and on again only to have it take me back to where I started off at (e.g. Let's say I have 100 songs, I start at 50 and I get to 55 before it shuts off. When I turn it back on, it starts at 50 all over again). This process would happen over and over again with seemingly no end.
So my question is, why does my iPod Shuffle stop working after a few songs and how can I fix it?
I already tried using the iTunes troubleshooting guide, but nothing worked.
Details -
4th Generation
I only use it at the gym or when I'm running
I've only used the Apple products that came with it so far
(e.g. charger, headphones, etc.)
881 MB are still left
Music stops randomly, no common number or pattern

I had the same problem, I purchased a new ipod shuffle, followed the instructions but it would stop after a few songs and I would have to shut it off, wait and turn it back on and it would go back to the same song and then once again, after a few songs it would shut off. I returned the ipod and got another one, same thing happened. This is how I resolved the issue.
1. open itunes, make sure its up to date, then connect your shuffle to your pc
2.on the left of the itunes window, select your ipod, then at the top select music then check the sync box and select "selected playlists"
3.then go back and click on your ipod on the left, a message will appear just select apply
all of your music should be emptied from your ipod.
4.delete all of your playlists on the left, this will not delete anything from your library. Delete the "purchased" playlist under itunes store on the left as well, once again this will not delete anything from your library
5.There should be an arrow just in front of your ipod, click on this arrow and you should see your music file for the ipod appear, this should be the only file that you see, everything else should be deleted.
6. go to your music library and check only the songs that you want to load into your ipod. Double click on each song to make sure that they all play.
If you find a song that does not play you should be asked to authorize it, don't waste your time that did not solve the issue for me, instead cancel to authorize the song and then delete the song and move it to recycle bin. Once the song is deleted a cloud should appear, click on the cloud and download the song again, when done, make sure the song plays and that it is checked.
7.After you have made sure that all of the songs play and are checked, click on your ipod once more, located to the left, check the box "sync only checked songs" then from the top select music. In the music window select "sync music' and then select "entire music Library"
8. Go back to the left and click on the arrow in front of your ipod, you should see the music file, click on the music file and you should see all of your music being loaded to your ipod.
9. When all of the music is done loading, eject your ipod by clicking on the arrow located after the battery symbol where your ipod appears on the left
10. Turn on your ipod and scroll through your songs to make sure that the problem is resolved.
Not sure if all of this was necessary but it worked for me.

Questions on process chains

Hai all,
I have two questions on Process chains.
1. I created a process chain for master data and a process chain for data loads(with ODS and cube). As the Master data has to be loaded first before loading transaction data, can I include the Master data process chain as a local process chain soon after the start process and then only after loading master data, the system proceeds to transaction data?
2. I designed a process chain with the aggreagtion and compression of cube data. I have forgot to check the option delete overlapping requests in the infopackage to load the infocube. I ran the process chain and now there are 2 requests and the duplicate documents. I want to delete the recent request and check the deleting duplicate requests option in info package and re run. The problem is the system is not allowing me to delete the recent request.
I appreciate any kind of help.
Thanks.

Hai Bhanu,
Thanks for the reply. I am sceduling the request for deletion in the Manage infocube> but the request is not getting deleted. Everytime I click refresh, the delete icon disappears and the screen becomes as it was before scheduing the deletion. I checked after sometime, even then the same thing...
I wonder the collpased requests can not be deleted???

Interview questions in process chain

hi
cany any one send me possible interview questions in process chain and errors with answer.
thanks in advance
pradeep

Hi Pradeep
1.Procedure for repeat delta?
You need to make the request status to Red in monitor screen and then delete it from ODS/Cube. Then when you open infopackage again, system will prompt you for repeat delta.
also.....
Goto RSA7->F2->Update Mode--->Delta Repetation
Delta repeation is done based on type of upload you are carrying on.
1. if you are loading masterdata then most of the time you will change the QM status to red and then repeat the delta for the repeat of delta. the delta is allowed only if you make the changes.
and some times you need to do the RnD if the repeat of delta is not allowed even after the qm status id made to red. here you have to change the QM status to red.
If this is not the case, the source system and therefore also the extractor, have not yet received any information regarding the last delta and you must set the request to GREEN in the monitor using a QM action.
The system then requests a delta again since the last delta request has not yet occurred for the extractor.
Afterwards, you must reset the old request that you previously set to GREEN to RED since it was incorrect and it would otherwise be requested as a data target by an ODS.
Caution: If the termianted request was a REPEAT request itself, always set this to RED so that the system tries to carry out a repeat again.
To determine whether a delta or a repeat are to be requested, the system ONLY uses the status of the monitor.
It is irrelevant whether the request is updated in a data target somewhere.
When activating requests in an ODS, the system checks delta repeat requests for completeness and the correct sequence.
Each green delta/repeat request in the monitor that came from the same DataSource/source system combination must be updated in the ODS before activation, which means that in this case, you must set them back to RED in the monitor using a QM action when using the solution described above.
If the source of the data is a DataMart, it is not just the DELTARNR field that is relevant (in the roosprmsc table in the system in which the source DataMart is, which is usually your BW system since it is a Myself extraction in this case), rather the status of the request tabstrip control is relevant as well.
Therefore, after the last delta request has terminated, go to the administration of your data source and check whether the DataMart indicator is set for the request that you wanted to update last.
If this is NOT the case, you must NOT request a repeat since the system would also retransfer the data of the last delta but one.
This means, you must NOT start a delta InfoPackage which then would request a repeat because the monitor is still RED. For information about how to correct this problem, refer to the following section.
For more information about this, see also Note 873401.
Proceed as follows:
Delete the rest of this request from ALL updated data targets, set the terminated request to GREEN IN THE MONITOR and request a new DELTA.
Only if the DataMart indicator is set does the system carry out a repeat correctly and transfers only this data again.
This means, that only in this case can you leave the monitor status as it is and restart the delta InfoPackage. Then this creates a repeat request
In addition, you can generally also reset the DATAMART indicator and then work using a delta request after you have set the incorrect request to GREEN in the monitor.
Simply start the delta InfoPackage after you have reset the DATAMART indicator AND after you have set the last request that was terminated to GREEN in the monitor.
After the delta request has been carried out successfully, remember to reset the old incorrect request to RED since otherwise the problems mentioned above will occur when you activate the data in a target ODS.
What is process chain and how you used it?
A) Process chains are tool available in BW for Automation of upload of master data and transaction data while taking care of dependency between each processes.
B) In one of our scenario we wanted to upload wholesale price infoobject which will have wholesale price for all the material. Then we wanted to load transaction data. While loading transaction data to populate wholesale price, there was a look up in the update rule on this InfoObject masterdata table. This dependency of first uploading masterdata and then uploading transaction data was done through the process chain.
What is process chain and how you used it?
A) We have used process chains to automate the delta loading process. Once you are finished with your design and testing you can automate the processes listed in RSPC. I have a real time example in the attachment.
for more detail
Collecting Process Chain Statistics
/thread/235805 [original link is broken]
Advice regarding process chains
creation of process chains
Message was edited by:
Kalpana M

Errors processing after adding Computed Column to Time.

Errors in the high-level relational engine. The 'Time' table is based on a named query, and contains one or more computed columns. A table based on a named query cannot contain computed columns. If the computed columns are necessary, add them to the query
expression.
Help me, pls! Thanks!

Hi CUONGNV0207,
According to your description, you get this error when processing cube. Right?
As the error message mentioned, a table based on a named query cannot contain computed columns. If you create a computed column in this table, it will throw this error. In this scenario, please go to the DSV and check if that table is set up with named query.
You can replace it with a DimTable in your database.
Reference:
cryptic error when processing cube
Errors processing after adding Computed
Column to Time
If you have any question, please feel free to ask.
Simon Hou
TechNet Community Support

SP3 Almost completes installation but freezes at the Finishing stage showing "Running processes after install"

I have an HP Pavilion zd7000 laptop with Windows XP & SP2 update installed. Processor is Intel Pentium 4. My system is clean with no rubbish software running. I have several anti-malware & anti-spyware systems installed but they are dormant & not running during the attempted installation. SP3 almost completes installation but freezes at "Finishing" stage showing "Running processes after install". Anti-virus is of course switched off. The system then hangs fore-ever with hard disc activity showing intermittently but nothing else happening. Luckily, by holding down the laptop on/off switch I can always eventually restore to previous settings & recover full use but without SP3! This is annoying & frustrating. I have seen a lot of threads about this problem but no real answers. Can anyone help please?

What is Shmrate.exe is not running?
This can be read two different ways
One well if you look at it like this
User>shmgrate>Operating system>drivers>computer. Result is denied!
If you have something like this
User > User Account Control >Operating system>drivers>computer. Result is denied again!
Note that an adminstrator is only a adminstrator and Computer Adminstrator can install Sp(s). Which I believe is tyour question. Which is my guess.
Which is the reason some people reccommend installing from the "Adminstrator" account Which generally is not a User account. Yes some people add and modify there account access by using Subinacl.exe and reset.cmd, which bumps the account from adminstrator to Computer Adminstrator. An alternative is to boot into safe mode. Pressing the *F8* key before the windows welcome screen starts up. And selecting safe mode. Which is why more people report success with using the .ISO install.
To add to your confusion. Windows Sp2 usually has windows installer 3.0, or windows installer 3.1
Table us types of accounts. I wish windows 200 documentation had made it completely into Xps documentation. They had an excellent table with tthe types of accounts
Limited user. Not able to run more then basic programs. Not able to ;install device drivers, not able to install progras, not able to install Sp(s)s
Power user Able to run more advanced programs. IE Defragger.
adminstrator. Mess with the operating system, back up things, able to install programs, add users.When Windows Xp is installed this is the type of user associated with adminstrator. NOT CA
Computer adminstrator. Able to Install of all things Sp(s).
Hopefully this helps you out. Of course there is the release notes, Xp solution center and of course things to do before installing Sp3.
Keith

Question of process after producing a song on logic express

Similar Messages

Maybe you are looking for