Question on 11g simulation

Forgive this newbie and personally untested functionality question...
I am looking over simulations and see that I can set a duration for a simulation definition. I can give a run time in months, days, hours, minutes, and seconds. All good so far. Question is about how that time is used when I run a simulation. Is the time "real" or is it "simulated"? There are cases where I will want to use calendar rules and other factors where simulating simulation times of days, weeks, and quarters into the picture. I am hoping to hear that time is "simulated" meaning the computer processes the simulation as quickly as possible. That would let me get an simulation time of say 60 minutes done in something less than that actual time. Can anyone who has experience using simulations verify this is the case for me?

The time is simulated.
For completeness: You can choose "Run to the end" where it will complete the simulation in a few seconds and just show you the results, or you can run the simulation "normally" where you will see tokens running through your process, queue sizes and everything. The time is still simulated, just not as fast.

Similar Messages

Human Task Auto Release Default and configuration question in 11g

Is there anyway to turn off the auto release feature of a human task if you do not put an expiration date on a task? Also the documentation says the default is 12 hours. If there is not a way to turn off the auto release feature, can the 12 hour default be changed? The documentation is not fully clear to me and then when I look at the UI from the console I do not understand what the identifiers of P5D, P4D, etc mean under the Default Duration column. I get the use of percentage but it is unclear what Default Duration is and how to use that field.
I saw in 10.1.2 there was a way to turn off the auto release feature of task via restrictedActions but I did not see this in 11g.
And last question is does anyone know if human task is stored to a database if it runs for too long similar to the concept discussed around bpel processes of hydration and dehydration?
Thanks,
Diane

I am able to fix this issue. After a series of R & D I was able to find that the root cause is %APPDATA%\jdeveloper. Deleting the relevant directory will solve this issue. In fact, I tried to delete the entire jdeveloper directory under %APPDATA% and the jdev 11.1.1.7 form generation issue got resolved. Those who find "referential integrity" issue may follow this approach.
This solution also applies to this thread
Auto Generate task Form

Question for 11g OCA certifications

Hi All,
I completed the 1Z0-007: Intro to 9i SQL back in 2003 and never got round to completing the other cert exams.
My question is, is this exam still valid or would the first exam need to take place again? Do the exam reults expire?
I see it is still mentioned as as one of the exams you can complete for it.
Thanks for the help.
Stuart

Yes, you are very much eligible for writing OCA 11g Certification Exams. All you need to do is, while registering for OCA Exam, that show your Oracle 9i SQL Exam details to the Prometric center and other details when you passed that exam.
For more information on OCA/OCP 11g Exams take a look at the below URL.
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=198
Regards,
Sabdar Syed.

Question about 11G application server

hello all,
i am absolutely new in this field but am 10g ocp certified.now i have few questions.
first of all please post any link from where i can find the stdy document from first to end of oracle 11G application server.
i need the 11G application server stdy material.
secondly am I eligible to appear for Oracle 11Gapplication server global?
please send me the contact details from which i can get all the global exam details of 11G as.
thanks
atanu

This is the documentation root for WLS 11g
http://download.oracle.com/docs/cd/E14571_01/wls.htm

Question on 11g Manual Upgrade (Step #33)

In the Note 837570.1 - Complete Checklist for Manual Upgrades to 11gR2 (Doc ID 837570.1), under Step #33
Step 33
Upgrade Statistics Tables Created by the DBMS_STATS Package
If you created statistics tables using the DBMS_STATS.CREATE_STAT_TABLE procedure, then upgrade these tables by executing the following procedure:
EXECUTE DBMS_STATS.UPGRADE_STAT_TABLE('SYS','dictstattab');
In the example, 'SYS' is the owner of the statistics table and 'dictstattab' is the name of the statistics table. Execute this procedure for each statistics table.
How do we know which tables were previously created with DBMS_STATS.CREATE_STAT_TABLE prior to upgrade?”
Thank you very much.

Hello and welcome to the forums.
The statistics tables created by DBMS_STATS, are used for exporting/importing statistics, these tables are not used by the optimizer. So if you are not planning to import statistics, you don't need to find (and update) these tables.
Anyway, stats tables have a basic table structure and can be found by the following query:
SELECT OWNER, TABLE_NAME FROM DBA_TAB_COLUMNS WHERE
COLUMN_NAME = 'STATID' AND DATA_TYPE= 'VARCHAR2' AND DATA_LENGTH=30Check if the listed tables have also these columns:
Name                                      Null?    Type
STATID                                             VARCHAR2(90)
TYPE                                               CHAR(3)
VERSION                                            NUMBER
FLAGS                                              NUMBER
C1                                                 VARCHAR2(90)
C2                                                 VARCHAR2(90)
C3                                                 VARCHAR2(90)
C4                                                 VARCHAR2(90)
C5                                                 VARCHAR2(90)
N1                                                 NUMBER
N2                                                 NUMBER
N3                                                 NUMBER
N4                                                 NUMBER
N5                                                 NUMBER
N6                                                 NUMBER
N7                                                 NUMBER
N8                                                 NUMBER
N9                                                 NUMBER
N10                                                NUMBER
N11                                                NUMBER
N12                                                NUMBER
D1                                                 DATE
R1                                                 RAW(32)
R2                                                 RAW(32)
CH1                                                VARCHAR2(3000)Regards
Gokhan Atil

Capacity planning question for 11g DB server

We are building a new 2-node RAC cluster for our new application; what is the general rule of thumb for number of CPUs, memory?
env: 2-node RAC, RH5, 11gR2

If this is a packaged application, the application vendor should be able to help you with this sort of sizing since they know what factors are going to be most important to resource utilization.
If this is a custom application, you'd need to talk to the development and architecture teams that built the application. Without any idea what the application is doing, we don't even know what metrics to ask about in order to guess at the requirements. For some systems, it will be the number of users. For other systems, it will be the types of users or the modules that are configured. Some systems will scale based on the amount of data, others will be independent of data volume but will depend on the number of middle tier servers. And it will always depend heavily on how efficient the code is-- a system that is built to take advantage of Oracle and to maximize efficiency, for example, will require much less hardware to do the same amount of work than a system that is built to be database agnostic that hasn't been optimized for efficiency.
Justin

11g QUESTION

I have a question on 11G. I am not able see save option in interface. When I create a new mapping or modify the existing one, to save it I am closing the mapping which propmpts me if I want to save the changes. In 10G I have options like "ok",cancel,Apply and Execute" at the interface level. But I don't see those options in 11G. Where do I find them or I have to close the interface everytime to save the changes.
-app

under the top menu you should see floppy icon , similar to sql developer use that to save that particualr object or save all the objects use the next icon for save all.

Differences between 1Z0-042, 1Z0-043 1Z0-052 and 1Z0-053 and 11g OCP

Hi All
I have a small dilemma
For Christmas I was given a copy of OCA/OCP Oracle Database 11g All-in-One Exam Guide with CD-ROM: Exams 1Z0-051, 1Z0-052, 1Z0-053 (Osborne Oracle Press Series) [http://www.amazon.co.uk/Oracle-Database-All-Guide-CD-ROM/dp/0071629181/ref=sr_1_5?ie=UTF8&s=books&qid=1262090730&sr=1-5|http://www.amazon.co.uk/Oracle-Database-All-Guide-CD-ROM/dp/0071629181/ref=sr_1_5?ie=UTF8&s=books&qid=1262090730&sr=1-5]
As you will see in the book title it covers 1Z0-051, 1Z0-052 and 1Z0-053
About a year ago I attended the following courses
TT - Oracle D/B 10g Program PL/SQL-QA-IQ
TT - Oracle PL/SQL - GK
TT - Oracle 10g Intro to SQL
I have been meaning to get round to taking my exams and OCA qualification is no problem as I can take 1Z0-051 and 1Z0-052 using the above book and the knowledge I gained on the course (even though the course was 10g).
But my question surrounds 11g OCP and how it requires instructor led training - now I have done my 10g course but I guess this wont count as an instructor led course for 11g OCP.
If not then im going to need to take the route of 1Z0-042, 1Z0-043 to get OCP and 1Z0-050 to upgrade to 11g
So I would ask how safe I would be learning the above mentioned book and taking the 1Z0-042, 1Z0-043 exams. I understand there is no accurate answer as it is subjective but if 1Z0-052 and 1Z0-053 (11g) knowledge covers 1Z0-042 and 1Z0-043 (10g) knowledge then there should be no problem, right?
I really dont want to have to take the book back or purchase another.
Thanks in advance
Rob

user3554032 wrote:
Hi All
I have a small dilemma
Think of it as an opporunity
For Christmas I was given .... (Take me to your santa ...)
.... (snipped)
Thanks in advance
RobYour'e thinking sensibly about this. Well done. And the hands on course needs to be considered carefully and I often say this can be deciding factor in planning.
IMHO there is at least 80% commonality between the topics for 1z0-042 AND 1Z0-052 .... and probably similar for 1z0-043 and 1z0-053 whoug I've never directly checked this and there may be a greater divergence there.
Be aware some topics in 1z0-050 will not be covered in the books you have as far as I am aware.
One option you have not considered is taking exams in this order ..... this will give you 10g OCP and 11g OCP. This is wha I did .... but it mainly occured that for me way as the 1z0-053 was fairly delayed into production and I wanted the certificates I could have as soon as possilble .... ie 10gDBAOCP and 11gDBAOCA. I actually did the 1z1-053 beta for my 11g DBA OCP ... cheaper than 1z0-050 as I already had 11g DBA OCA.
1z0-051 1z0-042 1z0-052 1z0-043 1z0-053.
I know you dont want to buy another book, but the 10g ones from Sybex (and associated CDROM's) give a slightly different viewpoint (though they are for 10gR1 and are not updated for 10gR2 topics). IMHO the sybex books can ometimes go a little over the top in some areas. But all these books can contain some errors ... however they do provide an extra set of practice questions. However it is an option for you.
Its worth registering your 10g course as a hands on course as soon as reasonably possible to ensure there are no issues with it (I assume you have attended the course from Oracle University).
Anyway these are my thoughts. But you know your own circumstances and are responsible for your own decisions. Good Luck.
- bigdelboy.

Event Handlers OIM 11g

Hi Folks ,
I am very new to OIM 11g , Could you please help me on below :
I have a OIM system, i want to see what all event handlers are present in OIM . Could you please tell me where can i go and look to find out the event handlers in my
OIM instance .
Thanks
P

OimWannaBe wrote:
Thanks i will go through the links .., just one more question :
In 11g , creating normal process task adapters /scheduled tasks , does it involve all the plugins stuff etc .., or they are like 10 g and plugins comes in to picture when we create event handlers .No, process task adapters are the same old way, just that you need to upload the jar into the db rather than copying them. Other than that everything else needs plugins atleast.
Other Ques :
Is it possible to create pre process/pre insert Event handlers in OIM 11g for trusted reconciliation . I heard somewhere that 11g doesnt support pre insert event handlers for trusted recon , is it ?Yep you heard it right, you cannot have event handlers during 11g recon pre process.
Thanks
Preeti.Edited by: Bikash Bagaria on Dec 29, 2011 10:39 PM

Compatibility of 11g Express Edition with 11g forms/reports.

Hi,
We are using 11g Forms/reports. Now, we want to use Oracle Database Express Edition 11g alongwith it.
Please guide me version compatibility of 11g forms/reports with 11g Database Express Edition & Weblogic Server.
Thanks/Regards.
Bhatt

Without more detail, it will be difficult to accurately answer your question. "11g" is part of a product name and not a product version. Therefore helping you with certification information will be difficult. I will share information about the very latest versions. Older versions will have different certifications. You can look those up on your own in the Certification document(s) included below.
The following are certified:
Forms/Reports 11.1.1.7 - WebLogic Server 10.3.6
Forms/Reports 11.1.2.2 - WebLogic Server 10.3.6
Regarding the database, refer to the Certification documentation below. Be sure to reference the correct one for the Forms release you are using. Generally speaking, the XE databases are not certified, but can be used with limited support. Again, for exact versions, refer to the documentation.
Fusion Middleware Certifications
http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html

11g: Contextual Events - How do I fire them on currency change?

Hi!
After posting a question here: 11g: Bounded task flows, need help and advice!
I read the article at http://technology.amis.nl/blog/3365/adf-11g-how-events-in-one-region-cause-other-regions-to-refresh because I need to refresh region B when the user selects in region A.
Now, the comments in that article suggest that Contextual Events are the built-in mechanism for that use case. So I tried that first. The online help suggests that this is what I need.
I read the online help and created an event and defined a producer and consumer in the event map in the parent page's page def. Now the help shows how to fire the event when a methodAction binding is executed. But I need to fire the event when the user selects a row in region A's table.
1. How do I do that? Where do I put the event? The help says it's possible, but does not show how. Add a selection listener to the backing bean and call the event-enabled methodAction binding from there? Or is there a better way?
2. I get the impression, that - when I use the event to call the consumer's binding ExecuteWithParams method - just the query of the consumer's VO is executed. That's great. But how do I reset the flow to the initial action? Just refreshing the VO is not enough. I need to reset the flow to the initial action (showing a view).
I read http://www.oracle.com/technology/products/jdev/tips/fnimphius/taskflow_in_popup/taskflow_in_popup.html and now I am completely confused. Use input parameters or use events? If I use events, how do I reset (refresh) the task flows?
Thanks,
Sascha
Edited by: Sascha Herrmann on Oct 19, 2008 3:33 PM

Sascha,
are region A and B share the same transaction ? If yes and the content in region B is a dependency of the VO used in A then you don't need contextual events at all. So if i assume that region A contains a list of departments and region B the employee table (where DepartmentsVO is the parent of EmployeeVO) then you can do as follows
- navigate to the region definition of region B in the pageDef file
- use the right mouse context menu to add parameters, and then a parameter (e.g. changeIndicator)
- wire the changeIndicator parameter to the DepartmentsVOIter current row key str (its a method exposed directly on the iterator)
- set the region binding refresh to ifNeeded
- set a partial trigger on the regionB to point to the departmentTable so the region is refreshed whenever the table row currency changes
The parameter that you added just does nothing except that it indicates to the region binding that the region must refresh. You point it to the row row key of the department iterator because it provides the changed value.
If VO in regionB is not dependent on the DepartmentVO, then you need to create a parameter on the bounded taskflow, which takes the value of changeIndicator to write it to pageFlowScope.currRowKey. Then create a set currentRowWithKey method as a default activity and wire it up to pageFlowScope.currRowKey
Frank

Keyboard Simulation tutorial and snippets

There are were several developers on the forums who asked various questions about keyboard simulation in Flash.
While waiting for Godot I have posted a quick tutorial with a working example and code for both timeline and class-based app. Just pasted the code on timeline or make class a document class.
http://as3-blog.net/snippets/keyboard.html

What source link? All the code is on the page below demo:
http://as3-blog.net/snippets/keyboard.html

IRM 11g Features

Hi, I have a couple of questions regarding 11g
1 - With the journal that stores client activity, it appears to only allow the recall of 5000 records via webservices, is this changable e.g. where a deployment has a number of users>5000?
2 - When updating rights (with a 3hr refresh period), even where the user synchronises a number of times, the user's rights do not appear to update before the end of the refresh period. Is this the way the system is now configured. I believe previously in 10g, the refresh period equivalent was the maximum time it took to refresh?
Thanks

Hi,
1) The searchJournal() operation on the web services limits each request to 5000 records, however by using multiple requests it is possible to get back more results. To get further results you will need to alter the page range parameter to request the next page of results.
For example after getting the first 5000 records you would call searchJournal() again, but this time with the page range 5001-10000.
pageRange.setFirst(5001);
pageRange.setLast(10000);
List<ContextJournalEntry> journalResults = contextOperations.searchJournal(
null, // no accounts filter
null, // no item codes filter
timeRange,
pageRange,
null); // no sorting details
2) This shouldn't have changed in 11g. It's not really my area of expertise, I'm sure somebody else will jump in with some suggestions on this one.
Regards,
James

I have one application that has requirement to do low and high speed acquisition. I want to change sample rate while running. BUT... I have E series Device

I am writing control software for a process that is usually dull and
requires only 10 Hz acquisition rate. At particular times during
the sequence, however, we are interested in looking at a couple of
channels at 1000 Hz. My approach so far is to configure my
Buffered DAQ to run at the higher rate at all times. When we are
in the 'high-speed DAQ' mode, the program logs every point to
disk. In the 'low-speed' mode, I am picking off every nth (in
this case, 10th) point to log to disk. At all times, I update my
GUI indicators on the front panel at a maximum of 4 times per second (I
find that anything faster results in an uncomfortable display), so I
fill up a FIFO with data in my acquisition / logging loop, and read the
FIFO in the display loop. The data in my GUI display can be up to
250 milliseconds off, but I find this acceptable . As a side note, I
need buffered Daq with hardware timing, as software timing results in
lost data at 1000 Hz.
This all works fine and dandy, but I am convinced that it is not the
most elegant solution in the world. Has anyone developed a
buffered DAQ loop where the scan rate can be adjusted during
operation? I would like to change the rate of the E-Series card
rather than relying on down-sampling as I am now doing.
The reason I have concern is that at the moment I am simulating my AI
using MAX and when running the down-sampling routine, I consistently
miss a particular event on the simulated data becuase the event in
question on the simulated data always occurs at the same 'time', and I
always miss it. Granted, while it is unlikely that my measured
signal and my acquisition are perfectly synchronized in the real world,
this particular situation points out the weakness in my approach.
More than anything, I am looking for ideas from the community to see
how other people have solved similar problems, and to have you guys
either tear apart my approach or tell me it is 'ok'. What do you
think?
Wes Ramm, Cyth UK
CLD, CPLI

Adding to Alan's answer:
One of the problems that comes with these tricks for variable-rate acquisition is being able to match up sample data with the time that it was sampled.
If you weren't using either of E-series board's counters, there is a nifty solution to this! You'll be using 1 of the counters to generate the variable-rate sampling clock. You can then use the 2nd counter to perform a buffered period measurement on the output of the 1st counter. This gives you a hw-timed measurement of every sampling interval. You would need to keep track of a cumulative sum of these periods to generate a hw-accurate timestamp value for each sample.
Note: the very first buffered period measurement is the time from starting the 2nd counter until the first active edge from the 1st. For your app, you should ignore it.
-Kevin P.

BPEL to invoke Webservice secured with HTTP Basic authentication

Hi All,
Iam trying to call a Synchronous BPEL porcess from BPEL by passing HTTP basic authentication.I have done below steps to achieve this.
1) Created Target Synchronous process ex : B
2) Created Source Syncronous Process ex : A
Iam trying to call B(Target) from A(source).
3) Open Composite.xml of A(Source)
4) Right Click on External Refernce B(Target) parter link and click Configure WS policies
5) Under Security tab attach oracle/wss_username_token_client_policy
6) Login to em/console
7) Right click on A(Source) Composite and click Service/Refence Properties>>B(Target)
8) Enter username and password under HTTP Basic Authentication.
9)Test from em.console(when we are testing under security tab I have checked None radio button)
So this is the Error message which is throwing.
==================================
The selected operation process could not be invoked.
An exception occured while invoking the webservice operation. Please see logs for more details.
oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: SOAP must understand error:{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security, {http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security.
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: SOAP must understand error:{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security, {http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:570) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:381) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:298) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:157) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:87) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:298) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:91) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:87) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:87) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:298) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:91) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:81) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:673) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:165) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:527) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: SOAP must understand error:{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security, {http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security. at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:712) at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:564) ... 68 more Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: SOAP must understand error:{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security, {http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:260) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:843) at oracle.sysman.emas.model.wsmgt.PortName.invokeOperation(PortName.java:664) ... 69 more Caused by: javax.xml.ws.soap.SOAPFaultException: SOAP must understand error:{http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security, {http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}Security. at oracle.j2ee.ws.client.jaxws.DispatchImpl.throwJAXWSSoapFaultException(DispatchImpl.java:874) at oracle.j2ee.ws.client.jaxws.DispatchImpl.invoke(DispatchImpl.java:707) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.synchronousInvocationWithRetry(OracleDispatchImpl.java:226) at oracle.j2ee.ws.client.jaxws.OracleDispatchImpl.invoke(OracleDispatchImpl.java:97) at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:256) ... 71 more
=======================================
Please let me know if Iam missing any steps.
Thanks
SSV

Followed this post.......
This is avery good question
in 11g i have taken out the steps from my document which i created for one our customer
go to composite
Right click on the external reference service and select “Configure WS policies” :done
Under the security tab, click add button and select “oracle/ wss_username_token_client_policy :done
6. Now Open the property Inspector window and click the add button under “Binding properties” tab. :done
7. Include the “oracle.webservices.auth.username--> :done
value-->password :done
8. Include the “oracle.webservices.auth.password”-->name :done
value-->password :done
Thanks
SSV

Question on 11g simulation

Similar Messages

Maybe you are looking for