Question on billing location, etc

Hey!
Is the incoming call originating in Jupiter or is it where I received it?
The call I placed, it's originating in Tequesta, which is obvious.
How accurate are these locations? The phone is an old dinosaur/flip phone.
Thanks for you input.
Date
Time
Number
Origin
Destination
Minutes
22-Dec
7:34PM
Unavailable
Jupiter FL
Incoming CL
5
22-Dec
7:46PM
xxx-xxx-xxxx
Tequesta FL
Ptst Lucie FL
1

I guess first of all, why would it matter.
As to where it originated, that gives the location of the tower which was used to originate the call. Verizon has pretty accurate information on where their towers are located.

Similar Messages

Using Suri asking any localised question in the UK, it responds with 'cannot help' can only use US locations etc. and in US English. Have I missed something or set something up incorrectly? I also thought it would interface with your Facebook but it just

Using Suri asking any localised question in the UK, it responds with 'cannot help' can only use US locations etc. and in US English. Have I missed something or set something up incorrectly? I also thought it would interface with your Facebook but it just comes back with a 'I can't help you with Facebook' message

Yeah, Siri - a headline feature on the iPhone 4s page - is beta at the mo.
But then anyone who's used Macs for a few years will know that most new software is pretty much still in beta when it's released anyway. Only Apple could get away with it and retain customers

I purchased and registered my CS 5.5 in Australia, but now live in the UK. How do I change my billing location to the UK?

Does anyone know how I change my billing location to the UK?

Contact support by web chat or phone.
Mylenium

Eternal ball, flashing question mark, kernel panic, etc... all! HELP!

Think this is a good, one... Here is the story:
Some apps will crash, that always happens, right? So I did not pay much attention to it until it was way too often. Learned about disk utility, repaired permissions on a regular basis and moved on. But then... One day disk utility told me there was something that could NOT be repaired. I ran and bought an External HD (usb.. not a good choice, but I found out that too late for an exchange). Backing up from there on was kind of a weekly thing.
But nothing to worry about, I could still use my iBook pretty well and with no problems. Then... one fine day I could not SAVE ANYTHING! Everything was working "normal", but when I wanted to save my work. It told me that I could not do it! Not even making a new bookmark from Firefox!
So I did verify and repair from disk utility, and I ran the hardware test giving me the following:
*ERROR CODE: 2STF/8/3:ATA -100 ata -6 -Master*
I have no idea what that means, but I used it to look for help online and everything pointed out that my HD needed to be replaced. I believe at this point is when I met the flashing folder icon with the question mark. Suddenly it would not detect the HD! But then... after turning it off and on for a few times it would see it and start-up normally. In one of those lucky start-ups I backed up all I thought was important in the external HD and made a clean install of OS X. Oh... and it is fun to try to install OS X when.. there is no HD in the list to pick for your destination! After a lot of patience, it would show up, but then is when I met the kernel panic mesg! After a few more tries (yes, I am a very patient person... sometimes), I finally could make a clean install of OS X. I even partitioned the HD to make sure there was nothing there.
Ok... seemed like it liked it.. but after a little while, strange things happened again, and after the restart, the blinking folder with the question mark again...
So... no choice, have to replace my HD right? I get a brand new Seagate, 120 Gb, 5400 rpm. Followed instructions from ifixit.com and after 3 hours (and a lot of fun!) I replaced the hard drive on my beloved iBook. This was really fun!
Installed the software on the new HD.. everything looks fine... for a few minutes. I tried to use right away what I use everyday to see if it works: web browser, iTunes, Activity Monitor, played a dvd perhaps, etc... And..? Nop... started crashing again... Got the blinking question mark after restart, etc. But now.. the hardware tests reports me no problems.
Ok... it was not the HD, but I already bought one, and installed it myself!... lets move on and see where is my problem.
Could it be the ram?
This model has only one slot of removable ram, and a built-in DIMM that I cannnot replace +(or can I?)+, so I remove the one I can, and restart it without it. First it looks fine again, everything is working, but after a while it starts crashing again. So.. it's not the ram... or at least it's not +this one+.
So... I think its time for a Professional to take a look at it, right?. So I took it to a Mac Store (not Apple store) and explained EVERYTHING to the guy that received my beloved iBook, he takes notes and tells me that it has to stay for a few days. After 1 week I receive a call from the store (another employee) telling me the sad news that my HARD DRIVE NEEDS TO BE REPLACED! And that they were very sorry but they cannot recover any of my data... what data?? All that was there was the OS!!!
So... a deep breath and I explain to him everything over the phone. Ok.. he says he will talk with the tech-guy and I'll hear from them in a few more days. I did...
I was very glad to hear it was a cable that connects the HD to the Logic Board (that's what I understood.. I think). That this was only 20 dollars, but somehow, with the labor I ended up paying around 100 dlrs! I found out later that apple changes this cable everytime they upgrade a HD.
Ok.. 200 dlrs spent already ($100 on my Seagate HD + $100 for the cable..), but if get my iBook to work again I'll be happy.
So I go home and start to work on installing and making everything work again: firefox, iTunes, fugu, tried cyberduck, taco, ... everything looked fine. But after a while... it happened again. Sometimes I don't even get the blinking folder, just a grey screen. I turn it off, and then comes the blinking '?' or it starts-up... and if it does, after a while it would crash.
(I started this post on my iBook, and I was like 2/3rd's through when I got the ball... and no response at all... tried force-quit... and nothing, had to power off..AND start this post all over again on my girlfriend's!!! )
So here I am... Of course I want to take it back to the guys at the MacStore and
complain about their poor job... But does anyone here has a good idea of what could it be?
My thoughts are something like this: Seems like if you do not use a lot of memory (I only have 512 Mb total, so a lot of it comes from the virtual, right?) it works fine, but somehow if it reaches a point where it needs more than a certain amount it would crash. I dont know if this even makes sense, but that's my feeling. The guys at the MacStore told me that they tested around 100 times restarting the computer and it looked fine, so yeah... if all they did was use a software to restart once and again, and again... without really using the memory, they would not see the problem, right? The problem comes later.. when you use the iBook.
Could it be then that the problem comes from the ram that is built-in? If so.. can this be replaced? Is it worth it? Can I do it myself?
Too many questions...
Any thoughts would be more than welcome and...
Thanks for reading all the post!
E

yeah....
the problem is that I do not have a firewire external HD, and it will not boot from my usb external...
Anyway... I am back from the MacStore and the guys told me that the next step would be to replace/work on the logic board, and that that was too expensive a job to do an an old iBook like mine, they did not recommend it to anyone (they told me they charge between 600-800 dlrs for this kind of job).
So... seems like my iBook is in a very bad shape.
I saw DT&T online and it seems like they do the job for half the price of the MacStore (before shipping costs), but... still, is it worth it?
I was thinking in the possibility to find someone who sells a used iBook in pieces because of a crashed screen or something, to get another logic board and try to replace it myself, but... is this something an amateur can do by himself?
Haven't checked ifixit.com for that yet.
Any ideas??
Thanks..
Edgar

TS1424 My Apple ID has been disabled, it won't let me updated my previous purchases. No reason for why it has been disabled or how to enable it again. I reset my password, security questions and billing info. Nothing- Anybody has seen this before?...

My Apple ID has been disabled, it won't let me updated my previous purchases. No reason for why it has been disabled or how to enable it again. I reset my password, security questions and billing info. Nothing… I even called Apple SUpport 1-800 # and they said they can't help me...Anybody has seen this before?...

You need to contact itunes support.
http://www.apple.com/support/contact/
There is NO telephone support for itunes. Use the link above.

Questions on user security etc

Hello, we are getting ready to implement an SOA strategy within our company and have decided to use XI as the interface to SAP from any other system. We have some (I have) questions on what some of the different approaches are for security. If anyone could help me with the following info (I have searched and searched and just not clear)
So before reading the scenario's here is the main thing I am trying to accomplish. Have webservices that take in a userID and password that is not stored in XI but on our LDAP server (like we have in the portal) and pass this to the back end ensuring user has writes to do desired function in sap. We want every user id so we can track if someone creates an purchase request etc, (instead of setting up a system id, audit puposes) So with that background I have the following scenarios
Scenario 1: Have a single sign on like the portal, so the user signs on with there normal account and XI accepts and forwards the request (this would mainly be a webservice) (I have seen some single sign on documentation but curious if it works in XI as it does in the portal)
Scenario 2: Same as one, but use ADS/LDAP as our authentication engine.
Scenario 3: Have userid put in, but no authentication is done on the front end but user is authenticated against the sap system and if allowed rfc/proxy is executed otherwise error message unauth is returned.
Scenario 4: Is the propagate principle mainly just to ensure the user has all rights to run all calls within internal XI procedures and wouldn't really apply to just ensuring user has rights in the backend?
I am sorry for the long question, I do reward points and I am just trying to get started on the right path with XI
Cheers
Devlin

Hi,
For your above cocern XI have provided the feature of Principal propagation with SSO ie.e Single sign On.
refer
Principal Propagation in SAP XI
/people/alexander.bundschuh/blog/2007/01/16/principal-propagation-in-sap-xi
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/808d3048-638c-2a10-35a6-faa48e50ad59
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/808d3048-638c-2a10-35a6-faa48e50ad59
/people/sap.user72/blog/2004/11/30/user-mapping-based-single-sign-on
http://help.sap.com/saphelp_nw04/helpdata/en/32/1c1041a0f6f16fe10000000a1550b0/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/69d95112-0d01-0010-8297-fa31feea26e0
also you could provide SSL Configuration across the firewall
You need to setup SSL layer for HTTPS endpoint.
Possible HTTP security levels are (in ascending order):
HTTP without SSL
HTTP with SSL (= HTTPS), but without client authentication
HTTP with SSL (= HTTPS) and with client authentication
HTTPS comes in two flavors, both ensuring the confidentiality of data sent over the network
Thanks
Swarup

Some questions on interrupts, threads etc

Havng gone through some documentation on interrupt, kernel level threads etc in WDF, I got a couple of questions:
1) Can a hardware interrupt be preempted by another interrupt in a single processor system?
2) What exactly is the difference between thread preemption and thread interrupt? Doesnt both mean stopping the current thread and putting it aside?
3) When an iterrupt is handled by an ISR, does the ISR always have to schedule a DCP? If the ISR itself can handle the interrupt, is the DPC needed?
4) I understand that spin locks are used for synchronisation at IRQL <=DISPATCH_LEVEL. EVT_WDF_IO_QUEUE_IO_WRITE works at <= DISPATCH_LEVEL. If I set Synchronisation scope of a write queue as SynchronisationScopeQueue, should I still go for a spin
lock, if the write callback and say an ioctl callback uses a shared resource?
5 )Kernel dispatcher objects are mutex, timer, event, semaphore etc. But If i use a fast mutex or guarded mutex or oridinary mutex using say, KeAcquireFastMutex() isnt that then a kernel dispatcher object? What this distinction? Why should we go explicitly
go for kernel dispatcher object?
6) How can timers be used for kernel level synchronisation? How different is this from timers created using WdfTimerCreate()?
7) It is said that "Never wait on a kernel dispatcher object in any driver routine that can be called at IRQL>=DISPATCH_LEVEL.". Does it mean
we should not use synchronisation mechanisms in this level? Or if we can use, should the thread try to acquire a lock with a zero wait time? And proceed if it could acquire the lock and return if the lock was not acquired?
8) I understand that in order to execute an interrupt, a driver does not create any special threads but use a thread that happens to be running at the moment( arbitrary thread ) . My question is, in what way is this accomplished? What aspect of the arbitrary
thread is the interrupt using ? The arbitrary thread must obviously have been written for another purpose.

To answer the questions:
#1   An interrupt service routine (ISR) running a lower IRQL may be interrupted by another ISR running at a higher level.
#2   Having never heard of a thread interrupt, all I can say here is that a thread may be pre-empted for a lot of reasons.
#3   An ISR does not have to schedule a DPC unless it needs to do work that it cannot do at high IRQL.
#4   Assuming that the Write and IOCTL are on seperate queues, yes you need a a lock to protect shared resources.
#5   As the name implies kernel dispatcher objects allow scheduling (i.e. dispatching of another thread), while things like spinlocks do not.
#6    Timers are just another dispatching object, i.e. one can wait on them the same way one waits on a mutex or a semaphore. A WDF TIMER is basically a wrapper around a regular timer to take care of some of the housekeeping (particularily
with respect to stopping the driver etc)
#7     If a routine is running at DISPATCH_LEVEL you are limited to spin locks for synchronization. You can with a zero timeout check the status of a kernel dispatcher object.   In general, routines like this should be
designed to only use spinlocks.
#8    An arbitrary thread is just that, it may be a thread in any process. Basically a currently running thread is grabed and used to run the interrupt so that the scheduler which has overhead and is not designed to run at interrupt level
IRQL's does not need to run.
Don Burn Windows Filesystem and Driver Consulting Website: http://www.windrvr.com Blog: http://msmvps.com/blogs/WinDrvr

[SOLVED] Basic question about x2go, freenx, etc. compatibility

My goal is to simply enable remote desktop on my soon to be headless server. Given the number of posts here at Arch explaining the trouble with freenx and the Arch support of x2go, I'm confused there is not more talk about their compatibility. And as I've just discovered, they're not:
"Various open source terminal server projects such as x2go also use the NX protocol; however, x2go is not compatible with other NX servers and clients." (NX Technology)
This leaves me in a bit of a pickle. CentOS doesn't support x2go, and Arch doesn't support freenx. What's the best interoperable solution then? Either a sever app which supports x2go or a client app that supports NXX?
Last edited by xtian (2013-09-17 21:56:10)

xtian wrote:Speaking of way of doing things. CentOSers are very persnickty about how you're supposed to maintain your system in terms of non-core packages etc. etc. And x2go is not coming up in the forum, wiki, or in the repositories (via the commanline tool yum). Read the response to my question about installing vim7.4. Hell, you can do _whatever you want_ to your system, but that doesn't mean anyone's going to help you when you run into trouble.
That comment strikes me as perfectly reasonable. The comment is pointing out that you are trying to use the wrong tool to do the job. The tool in this case is the distro - CentOS is not intended to be used in this way (for this job). Of course, if you insist on using a spanner to hammer nails, you are free to do so. But you can't really expect your local DIY shop to help you use the spanner when the nails don't go in straight rather than suggesting you use a hammer instead.
It is just like somebody who comes here and asks how they can stick with a known-stable set of packages while getting security updates. That's not what Arch is designed for so if you try to use it that way, you'll have a hard time. Of course, you are free to do so if you wish. But if you ask for help, you'll be pointed to another distro because that is the right answer.
It has nothing to do with being "persnickty". The answer is the most helpful answer somebody can give you.
Note: I'm assuming the description of CentOS, Fedora etc. is correct. I know the description of Fedora to be correct but I don't actually know anything about CentOS. But on the assumption that description is also correct, that answer is the most helpful answer somebody could give you, even if it is not the answer you wanted to hear.
Last edited by cfr (2013-09-10 00:33:54)

Programatically setting preferences - cache locations etc.

Hi all,
I've had a little look around but can't seem to find the answer to this question. I'd like to have a way of defining, at a machine level, the location for After Effects (and for that matter, Premiere and other Adobe apps') cache directories.
We have NFS mounted home directories with soft and hard quotas and every time the AE prefs get munged, users must remember to change these preferences or risk hitting their quota limit, which causes all manner of problems.
Since the introduction of CS5.5, disk cache is enabled by default, which is obviously a good thing for performance, but ideally, we'd be able to alert the user to the status of the cache directories at every launch of the application and provide an easy way to set the location to a local disk, pre-populating say /Users/Shared/Adobe/Caches or similar.
In the preferences file for AE CS6 (Adobe After Effects 11.0-x64 Prefs) there seems to be one path under the key ["Disk Cache Controls"] "Folder 6" but in the application iteself, there are other values, presumably for the Dynamic Link features of all the apps, which tend to point to a directory under ~/Library/Preferences/Adobe/Common (though quite why potentially massive media files are stored under users' preferences folders is beyond me.)
Any help or pointers would be greatly appreciated.
Thanks.

Double posting

Back up question -- space and location

Silly question. I tried to search and find, but what does the ipad actually back up. I assume it doesn't duplicate photos, videos etc -- docs that are already on the mac. What does it back up and how much space does it take up since i can't find the backup file.

Sheryl Kingstone wrote:
Silly question. I tried to search and find, but what does the ipad actually back up. I assume it doesn't duplicate photos, videos etc -- docs that are already on the mac. What does it back up and how much space does it take up since i can't find the backup file.
Answers to almost all iPad backup questions can be found here:
http://support.apple.com/kb/HT4079

Simple question about billing address.

This question may be simple, but is important to me.
May I change my credit card without changing my billing adress?
It's just that I am afraid that if I change my Credit card, which is european, I will then receive my bill in euros.
So, will it affect the billing adress at all?

Your iTunes billing address must fit the billing address of your CC!
If the billing address of your CC is not in the same country as your iTunes account that CC will be refused.
What exact countries/currencies are you talking of?

Simple question about billing adress.

This question may be simple, but is important to me.
May I change my credit card without changing my billing adress?
It's just that I am afraid that if I change my Credit card, which is european, I will then receive my bill in euros.
So, will it affect the billing adress at all?

Your iTunes billing address must fit the billing address of your CC!
If the billing address of your CC is not in the same country as your iTunes account that CC will be refused.
What exact countries/currencies are you talking of?

Questions for billing split

Hello, Experts,
I wanna ask 2 simple questions:
1. How can i find what is Combination criteria for billing split?
2. How can i find the routine in SAP, such as routine for billing split??
Thanks in advance.

In copy control, at item level, you have a field called VBRK/VBRP. The routine given here is the copy control routine for invoice split. Just check the code of the routine with the help of devept guy and you can find out the split criteria.
If you want to see this routine, you can see this in VOFM tcode. in menu
Data transfers--Bililng documents.
Rwd if it helps.

Logistics Extractor for NW04S ( SALES, BILLING , PAYMENT etc)

Hi,
I would like to know whether the same set of logistics extractor( example 2LIS_11_VAHDR, 2LIS_11_VAITM ) that were used in 3.5BW as well as the Old table( like VBAK, VBAP for sale order header and item etc) are still used in BI for NW04S?
Also Can anybody let me know the a> Data source b> Data store/cube etc c> Additional configuration for the logistic cockpit to enable the following in NW04S
1> Sales Doc (header, detail, schedule line, condition)
2> Billing, credit and debit memo
3> Acct Payables payments
Thanks in advance
BPSIP

Hi,
I dont think it has changed in NW04S.
Refer.
LO Cockpit (Use transaction LBWE)
/people/vikash.agrawal/blog/2006/12/18/one-stop-shop-for-all-your-lo-cockpit-needs
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/21406 [original link is broken] [original link is broken]
/people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
To understand LO extraction go through these weblogs by Roberto
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Thanks,
JituK

IRC question - connecting to server etc.

Hi everybody,
first of all : I don't know where to post this kind of question, therefore I post it here, because I'm a beginner in this area.
Can I connect to a IRC Server with my Java application? I think of something like this:
I start my java prog and specify : connect to server irc.<whatever> , then I join a channel with my username and password.
I know I could use an existing IRC Client, like MIRC or something else, but this is just the beginning of my question.
Can I get the output of this channel (what is posted by the users) and append it in e.g. my JTextPane ? (i know how to append text etc.)
I would appreciate any kind of help, if you know good links etc. I thankful too.

Hmm...first of all thanks for your answer.
Where do I have to look for the "semantics"? Is RFC 1459 correct?
Can I connect to an irc - server like to a website (using an URL object) ?
I'm a noob concerning all the network stuff , but I appreciate any kind of help.

Question on billing location, etc

Similar Messages

Maybe you are looking for