Question on blogs and comments

I have set up a webpage using iweb and have no subscribed to .mac and everything seems to be working except the comment section on bogs. I even have a comment on one of my blogs but I cannot read it. When I click on the link for the comment I am simply brought to the end of the page.

I called a friend in another city and she could read both your test comment and the comment from someone else but I cannot read either. When I click on comments I am simply taken to the end of that particular blog. Could the facebook addition be messing up my end? Or is my operating system now too old to operate the "comment section." At this time I am holding out for Leopard.

Similar Messages

IWeb, Blogging and Comments when using a different Host

Hi
I have an iWeb site, using Google Domain name, and hosting services of Network Solutions. I want to add a Blog to my site but allow for comments. Currently, iWeb is telling me that comments are added only if I use my MobileMe account. Is there a way to have a blog in iWeb, publish through my current host and have a comment feature that will update properly without kinks? I am considering using Blogger (Google) but unsure of what to do. Any suggestions or realities are accepted! Thanks

Just use Blogger or WordPress to create your blog and then you can place a link on your website to your blog. Either that or you can display your blog directly in your site by using iframe code.
Your other alternative is to use the iWeb blog and use something like http://www.intensedebate.com as a comment feature. You could include it on the same page as the blog or put it on a different page.
Personally, I don't like the iWeb blog, so I use WordPress for my blog and just keep a link to it from my site so that it goes straight to the blog and then opens in a new page.

2 questions: Thumbnail page and Comment page

I have created a class reunion site -
http://www.risd41.org/ri/alumni/1968/index.htm
using Dreamweaver MX 2004 (I'm a newb!).
(1) I now have over 200 photos that I'd like to be able
create a thumbnail page (or pages) for that link to the larger
images. I have seen other software (several years ago) that
basically takes a folder full of images and creates a linked
thumbnail page on the fly that you can FTP along with linked images
and your good to go. Dreamweaver have anything to do this?
and
(2) The site right now is static 1 way site. I'd like to have
the center part of the main home page have the lower area allow
visitor comments - much like a blog. How do I go about doing
that?

>
> (1) I now have over 200 photos that I'd like to be able
create a thumbnail
> page (or pages)
Dreamweaver have anything to do this?
Not in dreamweaver.
If you want static page:
Look in Fireworks or PhotoShop or some other IMAGE EDITOR or
thumbnail
gallery application.
If you want a server side application that allows photo
uploading and
visitor commenting, look for a script like Gallery or
Coppermine or similar
>
> and
>
> (2) The site right now is static 1 way site. I'd like to
have the center
> part of the main home page have the lower area allow
visitor comments - much
> like a blog. How do I go about doing that?
>
Install a blog script or other server side scripted
application that does
what you want.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

My challenge: recovering original iWeb files from 2010-2011 timeframe, which included a blog consisting of original postings from me and comments posted to the web from family and friends. I have the web archive files - but did not move iWeb files then.

Background: I started this blog while living overseas and going to sea with the Navy. Missed the opportunity to move the iWeb files with content attached from the mobile.me server to another server. Now, I have the original web archive files - good - but not the comments added to them by family and friends - bad.
My ultimate objective is to create a hard-cover bound book of these files with the comments on the blog ... they document a rather significant experience in my family's life ... to do this, I need to recover the original files with postings.
Any thoughts or insight would be sincerely appreciated!
Thanks, cfwnavy

You have replied to a post that is a month old now and the OP has never replied, so you are probably wasting your time here.
If you read the OP's post and my reply, you will see that he will not be able to recover his blog and neither will you.
If your Mac was stolen and you did not back up your iWeb domain.sites files, then you CANNOT get your blog back.
If you published your site to a host/server, then you can download it back onto your Mac and you will have to re-build your blog/website from scratch and re-publish, but all your replies and responses to posts will be lost and you can never get these back.
My advice would be to re-create your blog in another format such as WordPress.com which is free and don't use iWeb again.
There are plenty of alternatives out there.

Move Item List in BLOG to new BLOG keep All Enterprise Keywords and Comments.

Hello, I'm new on SharePoint Server 2010. I need a help please.
I create Site on BLOG Template. So in my site has a List name POSTs. And I enable Enterprise Keyword on that List. I use this blog and one day,My Posts now has an Error. The structure is crash. So,
I want to know if it has a way to move the item list on Old Blog
to New Blog. AND KEEP ALL RESOURCES.
My List items on Old BLOG have a resource like these >>>>
More than 1500 List Items, Some item has a Photo in their body., Some are contains the document attached in its.,
All most of them have many Comments, This POST has enable Enterprise Keyword on Permission setting. The POST Has 2 Approval Standard Workflows on SharePoint 2010 template.
Any Suggestion Please.
Best Regards,

Hello, I'm new on SharePoint Server 2010. I need a help please.
I create Site on BLOG Template. So in my site has a List name POSTs. And I enable Enterprise Keyword on that List. I use this blog and one day,My Posts now has an Error. The structure is crash. So,
I want to know if it has a way to move the item list on Old Blog
to New Blog. AND KEEP ALL RESOURCES.
My List items on Old BLOG have a resource like these >>>>
More than 1500 List Items, Some item has a Photo in their body., Some are contains the document attached in its.,
All most of them have many Comments, This POST has enable Enterprise Keyword on Permission setting. The POST Has 2 Approval Standard Workflows on SharePoint 2010 template.
Any Suggestion Please.
Best Regards,
What's solution is the safe way. Because of when I used "Content and Structure" and then copy/or/move to New POST, All of Enterprise Keywords, Categories and All comments are lost.

Viewing new comments on blogs and podcasts

Hello,
So, I open up iweb and the symbol with the number pops up on the iweb icon(which from what I've gathered is the "new comments"). Is there a way to just check the new comments, or do I have to go through my site and find them one by one. I allow comments on my pictures(as well as my blog and podcast) and I have a lot of pictures, so going through one by one to find comments doesn't seem to make much sense because it would take forever.
Thanks for the help.
Jimmy

I just spent a lot of time trying to figure this out myself, but I finally did.
In iWeb, look to the left side of the page names in the left hand column. You will see a blue dot next to any page with new comments somewhere within. If the comment is for a blog entry, the blue dot will be next to the main blog page. Click on "entries" under that and look for the blue dot to the left of the blog entry titles.
If the comment is on a photo, there will be a little comment icon on all photos where comments have been left. The icon is hard to see and there's no apparent way to tell which photo might have new comments that I can see, bu it's there. The icon is a little white bubble in the bottom right hand corner of the photo -- it's a bit hard to see.

Good morning. I've read in some blogs and forums that the verizon wireless works in Europe but my question is if it works with portugueses cards (like vodafone sim)?

Good morning (at least here in Portugal)
My question is that I want to buy the new Iphone 5C, but I want to use it here in Portugal. I was in the store menu looking for it and it appears that I have to stay with a network for two years, if not the price will increase significantly. I want to buy it online because the Iphone will only arrive in Portugal in December and probably it will be more expensive. I've read in some blogs and forums that the verizon wireless works in Europe but my question is if it works with portugueses cards (like vodafone sim)?
Thank you very much for the attention.
Daniela João.

The Verizon iPhone 5 is sold as unlocked. You can buy it full retail and use it anywhere you want. However, you won't get LTE in Europe and you won't be eligible for warranty service unless you take the phone back to the U.S. You won't be able to buy one on a contract unless you can pass a U.S. credit check. The minimum monthly cost would be $59.99 plus tax. I assume that all of this information will be true of of the 5C as well.
Wait and buy the phone in Portuagal.

Some questions on whitespace and &

Dear all,
I have some questions on whitespace and & that need you kind help:
1. Except /n /t /r and space, is there any characters that are whiteSpace characters?
2. When parsing XML document, when the ignorableWhitespace() method is called? Will it be called from characters() ?
e.g. Where the white space after <a> is called, and where is the white space between test1 and test 2 indied is called?
<a>
 test1 test2
</a> 3. When the & should be escaped in a well-formed (or validated) XML file by replacing &?
It should be excaped in any element content, such as test1 & test2 - except for <![CDATA[ section?
It should NOT always be used in attributes? e.g. <a b="test1 & test2"/> - has to do escaped by entity & - am I right?
Thanks!
Thanks


Thanks DrClap.
>
2. When parsing XML document, when the
ignorableWhitespace() method is called? Will it be
called from characters() ?It will be called when the document has a DTD and the
parser is a validating one that is actually
validating, when the parser sees whitespace that is
not part of a DTD element. It will not be called from
characters() because that is a method that you write.I wrote a contentHandler and using Xerces parser to parse an XML document. When I set validating feature to false, I found that for:
<a>
 test1 test2</a>The white space between <a> and (including newline) is actually called from characters(), not in ignorableWhitespace(). So does this mean that if validating - white space is always called from ignorableWhitespace(), and if not validating, if it is always called from characters()?
>
3. When the & should be escaped in a well-formed(or
validated) XML file by replacing &? The XML Recommendation says "The ampersand character
(&) and the left angle bracket (<) may appear
in their literal form only when used as markup
delimiters, or within a comment, a processing
instruction, or a CDATA section. If they are needed
elsewhere, they must be escaped using either numeric
character references or the strings "&" and
"<" respectively."So in this sense, both & in test1 & test2 and <a b="test1 & test2"/> is illegal unless replacing them by & - right? What does the markup delimiters mena in above XML Recommendation ? Example?
Thanks!

Suggestion and Comments for a w530 unit

Hello Everyone,
I've been using macbookpro for almost 4 years, and since I heavily use AutoCad, Sketchup and Lightroom on a daily basis it has been a bothersome to rebooth from one OS to another. I have been looking at the W530 for quite sometime and decided to make the swtich. I hope someone can enlighten me on how to go about the purcahsing of W530. From Lenovo site, i intend of getting this specification and minor upgrade of some specs:
Lenovo w530 Intel Core i7-3940XM Processor Extreme Edition (8M Cache, up to 3.80 GHz)
Window 7 pro 64 bit
Lightroom 4
15.6" FHD (1920 x 1080) LED Backlit AntiGlare Display, Mobile Broadband Ready
NVIDIA Quadro K2000M Graphics with 2GB DDR3
16 GB PC3-12800 DDR3 (4 DIMM)
500GB Hard Disk Drive, 7200rpm
Bluetooth 4.0
Third Party Source Items:
Additional 2 8gb Ram, so total of 32GB
msata AData XPG x300 256gb
2.5" sata ssd 512gb
Hard drive caddy from new mode us. com
Questions:
1. If in case, I need to add additional ram, would it be okey to just buy an additional 2 pcs of 8GB of Corsair Vengance, or do i need to buy a new 4 pcs of 8GB? so the total ram would be 32GB. Or would it be wise to just get the 32GB of Ram from Lenovo?
2. I plan to use the 500gb HDD in the hard drive caddy and use the msata and 2.5" ssd for primary drive, What would be the best way to copy the Windows and Lightroom from the HDD to msata drive (256gb adata)?
3. How come some unit with the w530 comes with a color sensor option and the higher w530 specs does not? would it be wise to get the Color sensor/ calibration from Lenovo or Just get other calibration software? and can you suggest in your experience a good calibration software for w530?
4. and lastly, does all w530 whether it be lower end specs or high end spec has a msata connection? Sorry of the ignorance.
Really sorry for a long post and questions. I hope someone could enlighten me before i purchase this unit. Any suggestions and comment would be highly appreciated. Thanks

Hi.
I'm almost in your same boat; used a Macbook when travelling for AutoCAD and I just ordered a W530 (should arrive Thursday) after a long period of agonizing of the purchase. I'll update this thread once I've used it a bit if you'd like, but I have some comments on your post:
1. My understanding is that RAM works best when all sticks are of the same capacity. Personally, I ordered the W530 with the least RAM possible and am replacing all factory with Corsair Vengance.
2. Use drive cloning software.(check out this site: http://lifehacker.com/5839753/the-best-disk-cloning-app-for-windows). I'm eschewing the mSATA and going with a 500gb SSD (found the Samsung 840 for $279) as the main drive with the 500gb HDD in the ultrabay (mSATA slot vacant). Why do you need the hard drive caddy?
3. Not sure. I didn't go top-of-the-line as you are so my config had the color sensor option.
4. All have the mSATA.

BPM attachments and comments where do save?

Hi there,
I develop a process with oracle bpm. this process have some activities that send attachments and comments together. my question is that where do save this attachments and comments? in database or file system? which table or which directory? i use default attachments and comments in HumanTasks.I hve to understand this files where do save, because i have to save this in my DB and use this in other processes.
can anybody help me?

Milad,
This really depends, both approaches file/database works. If it was me then I would use the file system. Make sure this file system is mounted for clustering. This can be any directory you want.
The database is another option, but has more maintenance overhead. In my experience especially as you use attachment using file base performs better (as long if your hard disc is of reasonable standard)
Thanks
Sander

Reader Extensions & offline collaboration, annotations and commenting??

I recently finished creating a first aid report in LiveCycle Designer.
The form includes a diagram of the human body (front and back), and we ask users to circle the body part affected or injured. This assumes that users will have access to annotations and commenting. However, I have discovered that, when opening this in Acrobat and exporting/saving the file as a Reader-enabled PDF (supposedly enabling Reader Extensions, in other words), this does not appear to have any effect: the annotation and commenting tools are not accessible in Reader.
It does appear, however, that users may still submit the form via email.
I do not fully understand usage rights and perhaps I'm also not fully understanding the [rather obfuscatory] Adobe documentation. Can these usage rights be enabled through Reader Extensions alone, or does our organization need to have some kind of special collaborative "magic" on the server in order to achieve this?
Can someone provide me with a detailed step-by-step that explains how this might be achieved?
Again, forgive my ignorance. [Offline] collaboration is not something I'm familiar with, being very new to the world of forms design in LiveCycle Designer. (We are using ES2, if that makes any difference...)
Thank you.

Hello, George.
The form in question does collect the following information:
- witnesses' names (first and last) with the ability to add/remove rows
- button to allow the user to attach witness statements and other supporting documents (e.g., photo of location, hazards, wounds/injuries)
There are also autoexpanding textfields that ask for the user to describe the location, incident, injuries sustained, hazards/environmental conditions that caused the incident/injury, preventive/corrective actions to be taken, etc.
All of our forms include a "Submit by Email" button and this has not presented any problems, regardless of platform; the only challenge thus far is that those using Reader won't be able to attach anything using the button in the form itself; they must use Acrobat instead. The workaround for that is to attach a message to the button using the Action Builder that lets users know this and that, if uing Reader, they will need to save a local copy of the form and ensure that they attach all pertinent supporting documents to their outgoing email message.
We'd like our forms to remain flowed, if possible. WIth this one, it's the piece asking the user to circle the affected/injured body part(s) that is at the root problem, it seems.
George, could you tell me more about distribution and what this entails? We are a large organization (3000+). I'm not certain of the particulars of our particular license agreement; I'd have to look into that further.
Where else might we potentially run into difficulty?
Thanks again for your help and information.

Using search and comments on my own server

Hi all,
I have created a blog site and I use the search and comments features.
I noticed that every time I publish my site to a folder (or to our internal server) instead to .Mac the functionality of the search and comments is gone.
Is there a way to restore them on our internal server?
Thanks,
Ziv

The search and comments features are part of dotMac.
WOW there are a lot of websites out there using .mac I would never of guessed given that information...
j/k
irony; if you _search for search_ your may find what you're searching for
Want someone to hold your hand?
Comments
C'mon Ziv search is your friend! Don't ask how to put it on your site if you don't know how to use it in the first place that's just hypocritical.

10.5.7 update Wiki, blog, and Calendar stopped working

I'm running 10.5.7 server and like a noob, I updated without giving others a chance to figure out what problems might arise from this monster. My server is a live machine and unfortunately I sorta need this working ASAP.
Now that I've updated, none of my web services work. The basic site works, but the wiki/blog thing says there's no available groups. In workgroup manager, when I select a group (Library in this case), I want to be able to enable wiki and blog and Web Calendar. They're grey because now the "Enable the following services for this group on: (None)" is selected. When I click on the 'None' button there's no option to choose my community site.
In Server Admin, when I select "Web", then select my site. Then click, Web Services... Wiki and blog is checked. Also, the access list is blank, as it's always been...
Here's a look at the most recent error in my /Library/Logs/wikid/error.log before today, I'd never seen anything like it...
2009-05-19 15:43:16-0700 [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
2009-05-19 15:43:16-0700 [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
2009-05-19 15:43:17-0700 [-] twisted.web.server.Site starting on 8086
2009-05-19 15:43:17-0700 [-] Starting factory <twisted.web.server.Site instance at 0x2eb3990>
2009-05-19 15:43:17-0700 [-] twisted.web2.channel.http.HTTPFactory starting on 8087
2009-05-19 15:43:17-0700 [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x2eb35f8>
2009-05-19 15:43:17-0700 [-] set uid/gid 94/94
2009-05-19 15:43:17-0700 [-] "Failed trying to build an index for a non-existent path: '/usr/share/wikid/help/fr.lproj'"
2009-05-19 15:43:17-0700 [-] "Failed trying to build an index for a non-existent path: '/usr/share/wikid/help/de.lproj'"
2009-05-19 15:43:17-0700 [-] "Failed trying to build an index for a non-existent path: '/usr/share/wikid/help/ja.lproj'"
Any thoughts why 10.5.7 update would do this?
-Graham
*edit* One more thing. When I select a user in WGM and click 'Advanced', then enable calendaring, I can't select a calendar host. There's no items in the list like there was before. It hyst says 'No Calendar Host Selected'. Again, this is enabled in the web services in Server Admin. Help!
Message was edited by: gracoat

Server Admin -> web
select the website in question, make sure it is checked as enabled
Server Admin -> web -> Web Services
make sure the users/groups that require access are displayed, otherwise click and add them
Check Wiki and Blog
etc...
save
Workgroup Manager -> Groups Icon
Select the correct group
Select the website that you want (www.your_domain.com) from the popup menu where it says : Enable the following service...
Check Wiki and Blog
etc...
save
Server Admin -> web
Stop
Start
That should do it...
If you try to access the wiki on localhost it won't work, you need to go to the actual domain
http://www.your_domain.com
on an intranet if you are using private dns you can create a test website for example
DNS -> your-server-name.mac.private. -> 192.168.1.150
and you select the correct private site, you can
http://your-server-name.mac.private and you should see it fine
Best of luck...

Why is iWeb posting both my blog and the individual entries

My problem is the the items I want to delete have somehow been uploaded as individual pages AND as part of our blog "At Home in Milwaukee."
Example:
in iWeb I have
At Home in Milwaukee
Entries
Archive
On .Mac, after I publish I get
At Home in Milwaukee
Once an Eagle
Sandra’s Trudy Blu...
Sandra’s Trudy Blu...
The bottom three items are the last three entries in the blog.
Since these pages are all part of the blog; if I delete them in iWeb, they will be deleted from the blog. Every time I add a new entry to the blog, it uploads as part of the blog AND as a separate page. I have no idea why it is doing this or whether it is occuring in .Mac or iWeb. Any advice would be much appreciated. Thanks, Sandra

i tried to search for other posts but came up with nothing.
That's odd, this question gets answered several times a day.
iWeb always creates this structure, that's how it has worked for over 3 years now. You seem to have chosen to make your sitename, blog, and pagename all identical to you personal domain name. I think that is not a great idea. At least your sitename and pagenames are still under your control. Change them to "jh" and "blog" or whatever you want to avoid some of the ugly duplication.
If you don't want to see your sitename in the browser address bar, you can manually remove that folder, but any RSS Subscribe links will not work then.
The url of your site that you give to people is of course just www.myname.com.

How to have like and comment option for Asset Library video in SharePoint2013?

Hi All,
In an Assert Library, user can able to upload videos. Once uploaded other users in that site should have options such as like and comments. How to achieve this scenario?
Thanks in advance!

Hi,
For this scenario we have "Site feed" in "Site collaboration" category of webpart,you can add in displayform.
Make sure to activate "Site feed" in site feature.
Whenever you see a reply and if you think is helpful, click "Alternate TextVote As Helpful"! And whenever you see a reply being an answer to the question of the thread, click "Alternate TextMark As Answer

Question on blogs and comments

Similar Messages

Maybe you are looking for