Question on BW data and R/3 transaction data mapping

Hello Expert,
How can we find the transactions to mapping the data in BW and R/3?
For example, DS 2LIS_04_P_COMP is for extraction component of order. We can change the component requirement in R/3. After that, a delta will post on delta queue. However, I find the posting date is in initial. Is there any other transaction which will affect the DS delta?
How to find the corresponding transaction in R/3 to a given DS?
Thanks
XY

Himanshu,
I agree with Sam's post.
If you are reporting on the Basic Cubes then the data will be stored in the BW system and if you are reporting on Remote cube then you wont find any data in the cube, since it is a virtual infoprovider.
Moreover, if you are doing full update then schedule the infopackage once again then it wont show the records which you have deleted from the tables. It will update only the records available in the table and then you can report on that.
Hope it helps...
Regards
Gattu

Similar Messages

Is it possible to see how many COGI errors I have cleared in previous month and in which transaction I can able to see that record?

Is it possible to see how many COGI errors I have cleared in previous month and in which transaction I can able to see that record?

Mukundan,
Refer Below SAP Note 1868084 - FAQ: Transaction COGI
Question:
Is it possible to log the actions in transaction COGI?
Answer:
SAP Note 309050 provides a modification but it can only be used temporarily. Also refer to SAP Note 1894587 in this context. It provides a report for displaying and deleting the data records in the log table AFFWPRO.
BR
KK

Automatic posting question: differences between bsd and prd

Hi to everyone. Although I searched for everywhere I know (including SAP help) I couldn't find a proper answer for my question "what are the differences between transactions "BSD - inventory posting" and "PRD - Cost (price) differences" ?". it seems as if both of thhese transactions are posting in case of cost differences between goods receipt and invoice receipt (and also there must be a stock movement). I will be very thankful vor a dtailed answer.
thanks in advance.
Mehmet Akif EREK
MM module responsible

Hai,
Both BSD & PRD are the Pre defined Transaction event keys used in a SAP Std system. TO understand the BSD, firstly know the BSX ( diff bet BSX & BSD ).
 Stock posting (BSX)
This transaction is used for all postings to stock accounts. Such postings are effected, for example:
o In inventory management in the case of goods receipts to own stock and goods issues from own stock
o In invoice verification, if price differences occur in connection with incoming invoices for materials valuated at moving average price and there is adequate stock coverage
o In order settlement, if the order is assigned to a material with moving average price and the actual costs at the time of settlement vary from the actual costs at the time of goods receipt
Because this transaction is dependent on the valuation class, it is possible to manage materials with different valuation classes in separate stock accounts.
Caution
Take care to ensure that:
o A stock account is not used for any transaction other than BSX
o Postings are not made to the account manually
o The account is not changed in the productive system before all stock has been booked out of it
Otherwise differences would arise between the total stock value of the material master records and the balance on the stock account.
Account determination of valuated sales order stock and project stock
Note that for valuated sales order stock and project stock (special stock E and Q) and for the transaction/event keys BSX andGBB, you must maintain an account determination to avoid receiving warning messages when entering data (purchase order or transfer posting) for valuated stock.
During data entry, the system attempts to execute a provisional account determination for GBB for valuated stock. The system will only replace the provisional account determination for GBB with the correct account determination for the stock account (BSX), in the background, if you enter the data for valuated stock at a later point in time.
Supplementary entry for stock (BSD)
This account is posted when closing entries are made for a cumulation run. This account is a supplementary account to the stock account; that is, the stock account is added to it to determine the stock value that was calculated via the cumulation. In the process, the various valuation areas (for example, commercial, tax), that are used in the balance sheet are taxed separately.
Now the details of PRD T/E key :
Price differences arise for materials valuated at standard price in the case of all movements and invoices with a value that differs from the standard price. Examples: goods receipts against purchase orders (if the PO price differs from the standard pricedardpreis), goods issues in respect of which an external amount is entered, invoices (if the invoice price differs from the PO price and the standard price).
Price differences can also arise in the case of materials with moving average price if there is not enough stock to cover the invoiced quantity. In the case of goods movements in the negative range, the moving average price is not changed. Instead, any price differences arising are posted to a price difference account.
Depending on the settings for the posting rules for transaction/event key PRD, it is possible to work with or without account modification. If you use account modification, the following modifications are available in the standard system:
o None for goods and invoice receipts against purchase orders
o PRF for goods receipts against production orders and
order settlement
o PRA for goods issues and other movements
o PRU for transfer postings (price differences in the case
of external amounts).

Where do i find daily posted question on sap abap and sap webdynpro abap

Hi
where do we find Daily posted questions on sap abap and sap webdynpro abap in scn sap so that i can go through the questions and answer them .

Hi,
Go to the Content tab of any space and click on discussions. Then you can sort them by date created or any other
For ex: This link for WDA discussions: - Web Dynpro ABAP
You can also click on Receive email notifications for any space to get updates on that space.
hope this helps,
Regards,
Kiran

Define event types in Customizing and restart the transaction.

how to define event to restart the transaction in BADI
I have given error message in badi. it is giving
No SAP Event Management communication for events; no event types def
    Message no. /SAPTRX/ASC084
Diagnosis
    You have not defined event types for the business process types.
    therefore not possible to communicate event data to SAP Event
    Management.
System response
    The communication of event data is aborted.
Procedure
    Define event types in Customizing and restart the transaction.

Hi Kevin,
What DataSource does your testalias refer to?
- If it is a custom DataSource, you must have created this custom DataSource also.
- If it is the default DataSource, you shouldn't have this problem in general...
In either case, you can try deploying your DataSource and/or DataSource alias together with your application:
http://help.sap.com/saphelp_nwce10/helpdata/en/45/07d2eeea3e0485e10000000a155369/frameset.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/45/c82cd460a42e96e10000000a155369/frameset.htm
I hope that helps!
Regards,
Yordan

Error while loading and adding IC Transaction

I received the following error while loading IC Transaction through Load Tasks utility and adding IC Transaction through Process IC Transaction option
Transactions Load - log:
*'Cell does not support inter-company transaction details*
Rajhi Holding; Falcon; 4110100;[NONE];[NONE];[NONE];[NONE];CF1234; 1; 01/01/2006; SAR; 2000; 2000; 1; FC1234; Grant;OWE
Kindly tell me what it is and how I can resolve this issue.

Hello
The probleme is that you have to include in your rule the transactions rule, to allow the acount where you whant to load icp transaction.
If you are working with YTD that you should use a diferent acount to load the icp transaction and then make the ajustment.
Becuse the program would not allow to load data and if you have already data it will give you an error, if you load your rule with the integrity box check
Sub Transactions()
     Hs.SupportsTran "A#Modulo_ICP_Ventas"
     Hs.SupportsTran "A#Modulo_ICP_Costos"
     Hs.SupportsTran "A#Modulo_ICP_Deudores"
     Hs.SupportsTran "A#Modulo_ICP_Acreedores"
End Sub
hope it helps

Two phase commit and bean managed transactions

To all the Transaction GURUS!
 Hi guys (-and gals).
 I've been doing J2EE for quite a while, but today was my first at
 XA-Transactions and Bean Managed Transactions.
 Why am I doing this?
 ====================
 Well I have to be able to controll the transactionalbehaviour of my
 bean
 during runtime, since some bean calls would cause a transactional
 overflow due to the stress they would cause to the system, whereas
 smaller bean calls need to run in one transaction.
 -> Therefore I need Bean Managed Transactions
 Since the bean does a call on two Database Connections it has to use a
 XA-Transaction.
 -> Therefore I need XA-Transactions.
 Abstract
 ========
 - I just can't get a User TransAction into the right Status it stays
 in 'STATUS_NO_TRANSACTION' all the time
 - Therefore the SQL Commands can be comitted 'java.sql.SQLException:
 Does not support SQL execution with no global transaction'
 - Therefore I can't do a rollback 'java.lang.IllegalStateException:
 Transaction does not exist'
 - Therefore I wrote this mail.
 I don't want to be a smart-"ass" writing such a detailed and indepth
 mail. I just would like to show that I tried, and would like to have
 some replies from you guys.
 Below are my configurations, code and logfiles.
 Thanx for taking your time and hope that the other people may learn
 something as well.
 cu
 Stefan
 Scenario
 ========
 used Software
 Bea Weblogic (WL) 6.0 SPx (not real sure which SP i have)
 Oracle 8.1.6 using the API-Version 8
 I configured the system as follows:
 (ofcourse I 'xxx'ed out all of the confidential data, sorry guys;-))
 excerpt from:
 config.xml
 <JDBCConnectionPool CapacityIncrement="5"
 DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="2"
 LoginDelaySeconds="1" MaxCapacity="5" Name="oraclePool"
 Properties="user=xxx;password=xxx;dll=ocijdbc8;protocol=thin"
 RefreshMinutes="5" Targets="fbsserver" TestConnectionsOnRelease="true"
 TestTableName="languages" URL="jdbc:oracle:thin:@xxx:1521:xxx "/>
 
 <JDBCTxDataSource EnableTwoPhaseCommit="true"
 JNDIName="finstral.datasource.fbs" Name="finstral Content Datasource"
 PoolName="oraclePool" Targets="fbsserver"/>
 
 <JDBCConnectionPool CapacityIncrement="5"
 DriverName="weblogic.jdbc.oci.xa.XADataSource" InitialCapacity="1"
 LoginDelaySeconds="1" MaxCapacity="2" Name="oracleSecurityPool"
 Properties="user=xxx;password=xxx;server=xxx.xxx.xxx"
 RefreshMinutes="5" Targets="fbsserver" TestConnectionsOnRelease="true"
 TestTableName="Users" SupportsLocalTransaction="true"/>
 
 <JDBCTxDataSource EnableTwoPhaseCommit="true"
 JNDIName="finstral.datasource.fbssecurity" Name="finstral Security
 Datasource" PoolName="oracleSecurityPool" Targets="fbsserver"/>
 
 ejb-jar.xml
 <ejb-jar>
 <enterprise-beans>
 <session>
 <ejb-name>TPCTestBean</ejb-name>
 <home>de.sitewaerts.futuna.common.test.tpcbean.TPCHome</home>
 <remote>de.sitewaerts.futuna.common.test.tpcbean.TPC</remote>
 <ejb-class>de.sitewaerts.futuna.common.test.tpcbean.TPCBean</ejb-class>
 <session-type>Stateless</session-type>
 <transaction-type>Bean</transaction-type>
 </session>
 </enterprise-beans>
 <assembly-descriptor/>
 </ejb-jar>
 
 weblogic-ejb-jar.xml
 <weblogic-ejb-jar>
 <weblogic-enterprise-bean>
 <ejb-name>TPCTestBean</ejb-name>
 <stateless-session-descriptor/>
 <jndi-name>finstral/ejb/test_tpc</jndi-name>
 </weblogic-enterprise-bean>
 </weblogic-ejb-jar>
 
 BeanCode (from the implementingBeanClass:
 'de.sitewaerts.futuna.common.test.tpcbean.TPCBean')
 public void setupTables() throws RemoteException
 UserTransaction tx = getTransaction();
 //getTransaction calls: 'tx = sCtx.getUserTransaction()' and does
 some errorhandling
 log.info("Die Transaktion vor den Connections: "+tx.toString());
 //Sorry bout the German. You should get the Message though.
 log.info("Der Transaktionsstatus vor den Connections:
 "+transactionStatus(tx));
 Connection conSecurity = getConnection(DATASOURCE_SECURITY, tx);
 //gets a Connection via a DataSourceName from the JNDI tree
 Connection conContent = getConnection(DATASOURCE_CONTENT, tx);
 log.info("Die frische Connection conSecurity: "+conSecurity);
 log.info("Die frische Connection conContent: "+conContent);
 tearDownTable(conSecurity);
 //Does nothing special
 tearDownTable(conContent);
 log.info("Die Transaktion nach dem Teardown: "+tx.toString());
 log.info("Der Transaktionsstatus nach dem Teardown:
 "+transactionStatus(tx));
 Statement stmt = null;
 try
 stmt = conSecurity.createStatement();
 //Well its getting interesting now.....
 log.info("Die Transaktion vor dem createtable: "+tx.toString());
 log.info("Der Transaktionsstatus vor dem createtable:
 "+transactionStatus(tx));
 log.info("Die Connection conSecurity vor dem createtable:
 "+conSecurity);
 log.info("Die Connection conContent vor dem createtable:
 "+conContent);
 stmt.executeUpdate(CREATE_TABLE);
 //above is the row 91 -> throws: 'java.sql.SQLException: Does
 not support SQL execution with no global transaction'
 stmt.close();
 stmt = conContent.createStatement();
 stmt.executeUpdate(CREATE_TABLE);
 stmt.close();
 commitTransaction(tx);
 catch (SQLException sqle)
 log.error("Konnte kein table init machen", sqle);
 rollbackTransaction(tx);
 //The Code for this method is below
 throw new EJBException(sqle);
 finally
 closeConnection(conSecurity);
 closeConnection(conContent);
 protected void rollbackTransaction(UserTransaction tx)
 log.info("Der Transaktionsstatus vor dem Rollback:
 "+transactionStatus(tx));
 log.info("Die Transaktion vor dem Rollback: "+tx.toString());
 try
 tx.rollback();
 //above is row 200 -> throws: 'java.lang.IllegalStateException:
 Transaction does not exist'
 log.info("Der Transaktionsstatus nach dem Rollback:
 "+transactionStatus(tx));
 log.info("Die Transaktion nach dem Rollback: "+tx.toString());
 catch (Exception e)
 log.error("Konnte die Transaktion nicht backrollen.", e);
 throw new EJBException(e);
 Log Excerpt
 ===========
 INFO setupTables() (66) - Die Transaktion vor den Connections:
 [email protected]
 INFO setupTables() (67) - Der Transaktionsstatus vor den Connections:
 STATUS_NO_TRANSACTION
 INFO setupTables() (72) - Die frische Connection conSecurity:
 weblogic.jdbc.rmi.SerialConnection@7c6daa
 INFO setupTables() (73) - Die frische Connection conContent:
 weblogic.jdbc.rmi.SerialConnection@3b425
 INFO setupTables() (78) - Die Transaktion nach dem Teardown:
 [email protected]
 INFO setupTables() (79) - Der Transaktionsstatus nach dem Teardown:
 STATUS_NO_TRANSACTION
 INFO setupTables() (86) - Die Transaktion vor dem createtable:
 [email protected]
 INFO setupTables() (87) - Der Transaktionsstatus vor dem createtable:
 STATUS_NO_TRANSACTION
 INFO setupTables() (88) - Die Connection conSecurity vor dem
 createtable: weblogic.jdbc.rmi.SerialConnection@7c6daa
 INFO setupTables() (89) - Die Connection conContent vor dem
 createtable: weblogic.jdbc.rmi.SerialConnection@3b425
 ERROR setupTables() (101) - Konnte kein table init machen
 java.sql.SQLException: Does not support SQL execution with no global
 transaction
 at
 weblogic.jdbc.oci.xa.XAConnection.beforeExecute(XAConnection.java:137)
 at
 weblogic.jdbc.oci.xa.Statement.executeUpdate(Statement.java:112)
 at weblogic.jdbc.jta.Statement.executeUpdate(Statement.java:185)
 at
 weblogic.jdbc.rmi.internal.StatementImpl.executeUpdate(StatementImpl.jav
 a:42)
 at
 weblogic.jdbc.rmi.SerialStatement.executeUpdate(SerialStatement.java:54)
 at
 de.sitewaerts.futuna.common.test.tpcbean.TPCBean.setupTables(TPCBean.jav
 a:91)
 at
 de.sitewaerts.futuna.common.test.tpcbean.TPCBeanImpl.setupTables(TPCBean
 Impl.java:130)
 at
 de.sitewaerts.futuna.common.test.tpcbean.TPCBeanEOImpl.setupTables(TPCBe
 anEOImpl.java:64)
 at
 de.sitewaerts.futuna.common.test.TwoPhaseCommitUnitTest.setUp(TwoPhaseCo
 mmitUnitTest.java:51)
 at
 org.apache.commons.cactus.AbstractTestCase.runBareServerTest(AbstractTes
 tCase.java:297)
 at
 org.apache.commons.cactus.server.ServletTestCaller.callTestMethod(Servle
 tTestCaller.java:148)
 at
 org.apache.commons.cactus.server.ServletTestCaller.doTest(ServletTestCal
 ler.java:199)
 at
 org.apache.commons.cactus.server.ServletTestRedirector.doPost(ServletTes
 tRedirector.java:149)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at
 weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
 java:213)
 at
 weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServl
 etContext.java:1265)
 at
 weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.
 java:1631)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
 INFO rollbackTransaction() (196) - Der Transaktionsstatus vor dem
 Rollback: STATUS_NO_TRANSACTION
 INFO rollbackTransaction() (197) - Die Transaktion vor dem Rollback:
 [email protected]
 ERROR rollbackTransaction() (206) - Konnte die Transaktion nicht
 backrollen.
 java.lang.IllegalStateException: Transaction does not exist
 at
 weblogic.transaction.internal.TransactionManagerImpl.rollback(Transactio
 nManagerImpl.java:228)
 at
 weblogic.transaction.internal.TransactionManagerImpl.rollback(Transactio
 nManagerImpl.java:222)
 at
 de.sitewaerts.futuna.common.test.tpcbean.TPCBean.rollbackTransaction(TPC
 Bean.java:200)
 at
 de.sitewaerts.futuna.common.test.tpcbean.TPCBean.setupTables(TPCBean.jav
 a:102)
 at
 de.sitewaerts.futuna.common.test.tpcbean.TPCBeanImpl.setupTables(TPCBean
 Impl.java:130)
 at
 de.sitewaerts.futuna.common.test.tpcbean.TPCBeanEOImpl.setupTables(TPCBe
 anEOImpl.java:64)
 at
 de.sitewaerts.futuna.common.test.TwoPhaseCommitUnitTest.setUp(TwoPhaseCo
 mmitUnitTest.java:51)
 at
 org.apache.commons.cactus.AbstractTestCase.runBareServerTest(AbstractTes
 tCase.java:297)
 at
 org.apache.commons.cactus.server.ServletTestCaller.callTestMethod(Servle
 tTestCaller.java:148)
 at
 org.apache.commons.cactus.server.ServletTestCaller.doTest(ServletTestCal
 ler.java:199)
 at
 org.apache.commons.cactus.server.ServletTestRedirector.doPost(ServletTes
 tRedirector.java:149)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at
 weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
 java:213)
 at
 weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServl
 etContext.java:1265)
 at
 weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.
 java:1631)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
 CONCLUSION
 ==========
 I'm going nuts.
 I just don't get it.
 The transaction is the same. I don't change the Connection. I start
 the Transaction at the beginning before I do anything!
 Please guys help me out.
 Thx alot.
 Stefan "it's three o'clock in the morning, my girlfriend left me, and
 my only friend is that stupid linux pinguine" Siprell
 Software-Development
 <<<<<<<<<<<<<<<<<<<<<<<<<<<
 <sitewaerts> GmbH
 Hebelstraße 15
 D-76131 Karlsruhe
 Tel: +49 (721) 920 918 22
 Fax: +49 (721) 920 918 29
 http://www.sitewaerts.de
 >>>>>>>>>>>>>>>>>>>>>>>>>>>


Hi Priscilla
 (did you ever see the movie ? :-))
 Well I moved away from the idea of using bean managed transaction. I'll
 be using Container Managed Transactions. To modify the
 transactionalbehaviour I'll write proxymethods which have certain
 different containermanaged transaction properties, but which all call
 the same private methods.
 But it works! Here is my experience:
 - I was doing a DDL statement: I was trying to create new Tables, which
 is a definite "no-go"
 - pay careful attention to:
 http://edocs.bea.com/wls/docs60/jta/trxejb.html#1051405
 and
 http://edocs.bea.com/wls/docs60/jta/trxejb.html#1051741
 and use these Settings for the Pool, don't ask me why, but it took me
 hours to find it out by myself:
 <JDBCConnectionPool CapacityIncrement="5"
 DriverName="weblogic.jdbc.oci.xa.XADataSource" InitialCapacity="1"
 LoginDelaySeconds="1" MaxCapacity="2" Name="oracleSecurityPool"
 Properties="user=xxx; password=xxx; server=xxx.xxx.xxx"
 RefreshMinutes="5" Targets="fbsserver" TestConnectionsOnRelease="true"
 TestTableName="Users" SupportsLocalTransaction="true"/>
 where as the server (shown as: xxx.xxx.xxx) is the TNS Name of the
 Oracle Driver.
 It works great.
 Another thing you guys might want to do is write a simple StatelessSB
 which does JDBC calls and two different database Connections.
 Then write a UnitTest which calls this bean a couple hundred times (with
 the same transaction). Have one test do clean writes, and another which
 causes some SQL-Exception (too long Data Columns, or likewise).
 Always count the entries and see if everything worked out. We're using
 this SetupConstruction to test new combinations of AS(sorry Priscilla) /
 Database / Db-Drivers to have a "standard test".
 I know my two cents were uncalled for, but it might save you some
 time.....
 thanx for your help
 Stefan
 -----Ursprüngliche Nachricht-----
 Von: Priscilla Fung [mailto:[email protected]]
 Bereitgestellt: Donnerstag, 2. August 2001 21:42
 Bereitgestellt in: transaction
 Unterhaltung: Two phase commit and bean managed transactions
 Betreff: Re: Two phase commit and bean managed transactions
 Hi Stefan,
 Looks like you have not actually begun a transaction by calling
 UserTransaction.begin(),
 so your setupTables method is really executing with no transaction
 context.
 Priscilla
 Stefan Siprell <[email protected]> wrote:
 >To all the Transaction GURUS!
 >
 >Hi guys (-and gals).
 >I've been doing J2EE for quite a while, but today was my first at
 >XA-Transactions and Bean Managed Transactions.
 >
 >Why am I doing this?
 >====================
 >Well I have to be able to controll the transactionalbehaviour of my
 >bean
 >during runtime, since some bean calls would cause a transactional
 >overflow due to the stress they would cause to the system, whereas
 >smaller bean calls need to run in one transaction.
 >-> Therefore I need Bean Managed Transactions
 >Since the bean does a call on two Database Connections it has to use
 >a
 >XA-Transaction.
 >-> Therefore I need XA-Transactions.
 >
 >Abstract
 >========
 >- I just can't get a User TransAction into the right Status it stays
 >in 'STATUS_NO_TRANSACTION' all the time
 >- Therefore the SQL Commands can be comitted 'java.sql.SQLException:
 >Does not support SQL execution with no global transaction'
 >- Therefore I can't do a rollback 'java.lang.IllegalStateException:
 >Transaction does not exist'
 >- Therefore I wrote this mail.
 >
 >I don't want to be a smart-"ass" writing such a detailed and indepth
 >mail. I just would like to show that I tried, and would like to have
 >some replies from you guys.
 >
 >Below are my configurations, code and logfiles.
 >
 >Thanx for taking your time and hope that the other people may learn
 >something as well.
 >
 >cu
 >
 >Stefan
 >
 >
 >Scenario
 >========
 >
 >used Software
 >-------------
 >Bea Weblogic (WL) 6.0 SPx (not real sure which SP i have)
 >Oracle 8.1.6 using the API-Version 8
 >
 >
 >I configured the system as follows:
 >(ofcourse I 'xxx'ed out all of the confidential data, sorry guys;-))
 >excerpt from:
 >
 >config.xml
 >----------
 ><JDBCConnectionPool CapacityIncrement="5"
 >DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="2"
 >LoginDelaySeconds="1" MaxCapacity="5" Name="oraclePool"
 >Properties="user=xxx;password=xxx;dll=ocijdbc8;protocol=thin"
 >RefreshMinutes="5" Targets="fbsserver" TestConnectionsOnRelease="true"
 >TestTableName="languages" URL="jdbc:oracle:thin:@xxx:1521:xxx "/>
 >
 >
 >
 ><JDBCTxDataSource EnableTwoPhaseCommit="true"
 >JNDIName="finstral.datasource.fbs" Name="finstral Content Datasource"
 >PoolName="oraclePool" Targets="fbsserver"/>
 >
 >
 >
 ><JDBCConnectionPool CapacityIncrement="5"
 >DriverName="weblogic.jdbc.oci.xa.XADataSource" InitialCapacity="1"
 >LoginDelaySeconds="1" MaxCapacity="2" Name="oracleSecurityPool"
 >Properties="user=xxx;password=xxx;server=xxx.xxx.xxx"
 >RefreshMinutes="5" Targets="fbsserver" TestConnectionsOnRelease="true"
 >TestTableName="Users" SupportsLocalTransaction="true"/>
 >
 >
 >
 ><JDBCTxDataSource EnableTwoPhaseCommit="true"
 >JNDIName="finstral.datasource.fbssecurity" Name="finstral Security
 >Datasource" PoolName="oracleSecurityPool" Targets="fbsserver"/>
 >
 >
 >
 >
 >
 >ejb-jar.xml
 >-----------
 ><ejb-jar>
 > <enterprise-beans>
 > <session>
 > <ejb-name>TPCTestBean</ejb-name>
 >
 ><home>de.sitewaerts.futuna.common.test.tpcbean.TPCHome</home>
 >
 ><remote>de.sitewaerts.futuna.common.test.tpcbean.TPC</remote>
 >
 ><ejb-class>de.sitewaerts.futuna.common.test.tpcbean.TPCBean</ejb-class>
 > <session-type>Stateless</session-type>
 > <transaction-type>Bean</transaction-type>
 > </session>
 > </enterprise-beans>
 > <assembly-descriptor/>
 ></ejb-jar>
 >
 >
 >
 >weblogic-ejb-jar.xml
 >--------------------
 ><weblogic-ejb-jar>
 > <weblogic-enterprise-bean>
 > <ejb-name>TPCTestBean</ejb-name>
 > <stateless-session-descriptor/>
 > <jndi-name>finstral/ejb/test_tpc</jndi-name>
 > </weblogic-enterprise-bean>
 ></weblogic-ejb-jar>
 >
 >
 >
 >BeanCode (from the implementingBeanClass:
 >'de.sitewaerts.futuna.common.test.tpcbean.TPCBean')
 >-----------------------------------------------------------------------
 >---------------------
 >
 > public void setupTables() throws RemoteException
 > {
 > UserTransaction tx = getTransaction();
 > //getTransaction calls: 'tx = sCtx.getUserTransaction()' and does
 >some errorhandling
 >
 > log.info("Die Transaktion vor den Connections: "+tx.toString());
 > //Sorry bout the German. You should get the Message though.
 > log.info("Der Transaktionsstatus vor den Connections:
 >"+transactionStatus(tx));
 >
 > Connection conSecurity = getConnection(DATASOURCE_SECURITY, tx);
 > //gets a Connection via a DataSourceName from the JNDI tree
 > Connection conContent = getConnection(DATASOURCE_CONTENT, tx);
 >
 > log.info("Die frische Connection conSecurity: "+conSecurity);
 > log.info("Die frische Connection conContent: "+conContent);
 >
 > tearDownTable(conSecurity);
 > //Does nothing special
 > tearDownTable(conContent);
 >
 > log.info("Die Transaktion nach dem Teardown: "+tx.toString());
 > log.info("Der Transaktionsstatus nach dem Teardown:
 >"+transactionStatus(tx));
 >
 > Statement stmt = null;
 > try
 > {
 > stmt = conSecurity.createStatement();
 > //Well its getting interesting now.....
 >
 > log.info("Die Transaktion vor dem createtable: "+tx.toString());
 > log.info("Der Transaktionsstatus vor dem createtable:
 >"+transactionStatus(tx));
 > log.info("Die Connection conSecurity vor dem createtable:
 >"+conSecurity);
 > log.info("Die Connection conContent vor dem createtable:
 >"+conContent);
 >
 > stmt.executeUpdate(CREATE_TABLE);
 > //above is the row 91 -> throws: 'java.sql.SQLException: Does
 >not support SQL execution with no global transaction'
 >
 > stmt.close();
 >
 > stmt = conContent.createStatement();
 > stmt.executeUpdate(CREATE_TABLE);
 > stmt.close();
 > commitTransaction(tx);
 > }
 > catch (SQLException sqle)
 > {
 > log.error("Konnte kein table init machen", sqle);
 > rollbackTransaction(tx);
 > //The Code for this method is below
 > throw new EJBException(sqle);
 > }
 > finally
 > {
 > closeConnection(conSecurity);
 > closeConnection(conContent);
 > }
 > }
 >
 > protected void rollbackTransaction(UserTransaction tx)
 > {
 > log.info("Der Transaktionsstatus vor dem Rollback:
 >"+transactionStatus(tx));
 > log.info("Die Transaktion vor dem Rollback: "+tx.toString());
 > try
 > {
 > tx.rollback();
 > //above is row 200 -> throws: 'java.lang.IllegalStateException:
 >Transaction does not exist'
 > log.info("Der Transaktionsstatus nach dem Rollback:
 >"+transactionStatus(tx));
 > log.info("Die Transaktion nach dem Rollback: "+tx.toString());
 > }
 > catch (Exception e)
 > {
 > log.error("Konnte die Transaktion nicht backrollen.", e);
 > throw new EJBException(e);
 > }
 > }
 >
 >Log Excerpt
 >===========
 >INFO setupTables() (66) - Die Transaktion vor den Connections:
 >[email protected]
 >INFO setupTables() (67) - Der Transaktionsstatus vor den Connections:
 >STATUS_NO_TRANSACTION
 >INFO setupTables() (72) - Die frische Connection conSecurity:
 >weblogic.jdbc.rmi.SerialConnection@7c6daa
 >INFO setupTables() (73) - Die frische Connection conContent:
 >weblogic.jdbc.rmi.SerialConnection@3b425
 >INFO setupTables() (78) - Die Transaktion nach dem Teardown:
 >[email protected]
 >INFO setupTables() (79) - Der Transaktionsstatus nach dem Teardown:
 >STATUS_NO_TRANSACTION
 >INFO setupTables() (86) - Die Transaktion vor dem createtable:
 >[email protected]
 >INFO setupTables() (87) - Der Transaktionsstatus vor dem createtable:
 >STATUS_NO_TRANSACTION
 >INFO setupTables() (88) - Die Connection conSecurity vor dem
 >createtable: weblogic.jdbc.rmi.SerialConnection@7c6daa
 >INFO setupTables() (89) - Die Connection conContent vor dem
 >createtable: weblogic.jdbc.rmi.SerialConnection@3b425
 >ERROR setupTables() (101) - Konnte kein table init machen
 >java.sql.SQLException: Does not support SQL execution with no global
 >transaction
 > at
 >weblogic.jdbc.oci.xa.XAConnection.beforeExecute(XAConnection.java:137)
 > at
 >weblogic.jdbc.oci.xa.Statement.executeUpdate(Statement.java:112)
 > at weblogic.jdbc.jta.Statement.executeUpdate(Statement.java:185)
 > at
 >weblogic.jdbc.rmi.internal.StatementImpl.executeUpdate(StatementImpl.ja
 v
 >a:42)
 > at
 >weblogic.jdbc.rmi.SerialStatement.executeUpdate(SerialStatement.java:54
 > at
 >de.sitewaerts.futuna.common.test.tpcbean.TPCBean.setupTables(TPCBean.ja
 v
 >a:91)
 > at
 >de.sitewaerts.futuna.common.test.tpcbean.TPCBeanImpl.setupTables(TPCBea
 n
 >Impl.java:130)
 > at
 >de.sitewaerts.futuna.common.test.tpcbean.TPCBeanEOImpl.setupTables(TPCB
 e
 >anEOImpl.java:64)
 > at
 >de.sitewaerts.futuna.common.test.TwoPhaseCommitUnitTest.setUp(TwoPhaseC
 o
 >mmitUnitTest.java:51)
 > at
 >org.apache.commons.cactus.AbstractTestCase.runBareServerTest(AbstractTe
 s
 >tCase.java:297)
 > at
 >org.apache.commons.cactus.server.ServletTestCaller.callTestMethod(Servl
 e
 >tTestCaller.java:148)
 > at
 >org.apache.commons.cactus.server.ServletTestCaller.doTest(ServletTestCa
 l
 >ler.java:199)
 > at
 >org.apache.commons.cactus.server.ServletTestRedirector.doPost(ServletTe
 s
 >tRedirector.java:149)
 > at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 > at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 > at
 >weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl
 >java:213)
 > at
 >weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServ
 l
 >etContext.java:1265)
 > at
 >weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl
 >java:1631)
 > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
 > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
 >INFO rollbackTransaction() (196) - Der Transaktionsstatus vor dem
 >Rollback: STATUS_NO_TRANSACTION
 >INFO rollbackTransaction() (197) - Die Transaktion vor dem Rollback:
 >[email protected]
 >ERROR rollbackTransaction() (206) - Konnte die Transaktion nicht
 >backrollen.
 >java.lang.IllegalStateException: Transaction does not exist
 > at
 >weblogic.transaction.internal.TransactionManagerImpl.rollback(Transacti
 o
 >nManagerImpl.java:228)
 > at
 >weblogic.transaction.internal.TransactionManagerImpl.rollback(Transacti
 o
 >nManagerImpl.java:222)
 > at
 >de.sitewaerts.futuna.common.test.tpcbean.TPCBean.rollbackTransaction(TP
 C
 >Bean.java:200)
 > at
 >de.sitewaerts.futuna.common.test.tpcbean.TPCBean.setupTables(TPCBean.ja
 v
 >a:102)
 > at
 >de.sitewaerts.futuna.common.test.tpcbean.TPCBeanImpl.setupTables(TPCBea
 n
 >Impl.java:130)
 > at
 >de.sitewaerts.futuna.common.test.tpcbean.TPCBeanEOImpl.setupTables(TPCB
 e
 >anEOImpl.java:64)
 > at
 >de.sitewaerts.futuna.common.test.TwoPhaseCommitUnitTest.setUp(TwoPhaseC
 o
 >mmitUnitTest.java:51)
 > at
 >org.apache.commons.cactus.AbstractTestCase.runBareServerTest(AbstractTe
 s
 >tCase.java:297)
 > at
 >org.apache.commons.cactus.server.ServletTestCaller.callTestMethod(Servl
 e
 >tTestCaller.java:148)
 > at
 >org.apache.commons.cactus.server.ServletTestCaller.doTest(ServletTestCa
 l
 >ler.java:199)
 > at
 >org.apache.commons.cactus.server.ServletTestRedirector.doPost(ServletTe
 s
 >tRedirector.java:149)
 > at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 > at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 > at
 >weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl
 >java:213)
 > at
 >weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServ
 l
 >etContext.java:1265)
 > at
 >weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl
 >java:1631)
 > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
 > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
 >
 >
 >CONCLUSION
 >==========
 >I'm going nuts.
 >I just don't get it.
 >The transaction is the same. I don't change the Connection. I start
 >the Transaction at the beginning before I do anything!
 >Please guys help me out.
 >Thx alot.
 >
 >Stefan "it's three o'clock in the morning, my girlfriend left me, and
 >my only friend is that stupid linux pinguine" Siprell
 >Software-Development
 ><<<<<<<<<<<<<<<<<<<<<<<<<<<
 ><sitewaerts> GmbH
 >Hebelstraße 15
 >D-76131 Karlsruhe
 >
 >Tel: +49 (721) 920 918 22
 >Fax: +49 (721) 920 918 29
 >http://www.sitewaerts.de
 >>>>>>>>>>>>>>>>>>>>>>>>>>>>
 >
 >
 >

Question about tranferring data from iPhone 3gs to iPhone 4

I just had a couple quick questions about transferring data from my old phone from my new iPhone 4. The reason i am wondering is because i am worried about whether i will encounter any problems when doing so.
First off i have already sold my phone today, i reset all data and settings from the phone and gave it to my buddy so its gone. I did a full sync and backup yesterday so all the necessary files should be on my computer(windows 7). Now, im basically wondering if i will run into any problems if i restore my iphone 4 from a backup. My 3gs was running 3.1.2 on att. Now i know IDEALLY i would have updated it to iOS 4 before backing it up and used the newest version of itunes, but i did not. Does anyone think this will be a problem for me?
Now with that out of the way, my biggest fear is losing my old data(text messages and notes mainly because i am a pack rat for those type of things) so id like to be SURE that none of my old backups will be deleted in any scenario. The reason i dont just restore it right now is because i want my new phone to be as clutter free as possible. I am going to be putting on here only the apps that i used often and would basically like to transfer over the BARE minimum; texts, notes, and highly used apps... So i guess my main question is can you transfer over only certain things like texts and notes after setting up the phone as a new phone. And if i were to set up the phone as a new phone what would happen to my old backups? Would i be able to selectively restore?
Im afraid that it might not be a possibility to transfer only certain things even though it should be.. i should be able to select a text messages folder and put it on my new phone and be done with it... But anyway i dont want to rant. Can anyone explain to me how this all will work?
ULTIMATE GOAL: Transfer only texts, notes, certain apps(and their data) and NOTHING ELSE.
MOST IMPORTANT THING: Not losing texts and notes. I can deal with putting all the old **** on my new phone and cluttering/slowing it down if i NEED to.
Thank you in advance, sorry for the long post.

If the most important thing for you is keeping old text messages, notes, and voicemail, then you'll need to sync the phone from your existing backup. I know of no other way to access those items.
Once you have synced to the new phone, check that you have those items that were important. Then you can reconnect your phone to iTunes, and change the sync settings to remove the apps or other items you no longer want to keep on the phone.
iPhone backups are stored by iTunes; you can see them by opening your iTunes preferences, clicking on "Devices" and then looking in the window. You can delete old backups from here. I don't know how you can open/read the backups though.
I don't expect you'd have any problems syncing from your old phone's backup, but it's definitely an either/or situation. Since you got rid of the old phone already, it's too late to email yourself your notes, or copy the text messages. Your previous backup is your only solution.

Simple question about table structure and HR in BW

i need to following data from HR:
current FTE, employee number, cost place
i dont think the current FTE is stored per employee. Therefor is would need a list that contains:
mutation start date, mutation end date, FTE, employee, cost place
i think cost place is a custom field.
my question : what tables names and field names do i need?
Thanks in advanced

Hi,
For Head Count you can use 0HR_PA_0 datasource and the other Employee details like start date and end date you can get them from employee master data and FTE can be calculated from the Emloyee Master Data and Head count data.
Hope this helps...
Thanks,

Questions on Client Failver and Fast Failover

've few questions regarding Client Failover and Fast Faiolver of Oracle Database HA. Before I ask those questions I would like to explain my environment. Below are the details.
- We have two physical locations called 'ABC' and 'PQR'
- ABC is the primary site.
- PQR is the standby site.
- In ABC, we have Oracle RAC database (11.2.0.2) with two nodes.
- In PQR, we have a single server standalone database (11.2.0.2) with ASM. This is not a RAC.
- Data Guard has been configured between ABC and PQR and it is working as expected.
- Please note that we have a licence for Active Data Guard.
- We have Oracle Identity Management products at both ABC and PQR and they are going to use RAC database as a primary database which is in ABC.
- We did not configure Data Guard broker yet.
We want to achieve below goals:
Goal 1:
Whenever RAC primary goes down completely, standby database should become primary database AUTOMATICALLY and it should allow read/write operation.
I guess this is called 'Fast Failover'. Please let me know if I am wrong.
Questions :
- To make this happen, Do I need to configure Data Guard Broker so that standy database becomes primary when RAC goes down completely with planned or unplanned outage.
- Let's say RAC goes down completely, how long does Data Guard broker take to make standby db as Primary.
- What about the client/application who already connected to RAC.
- Let's standby DB has become as primary and after sometime if RAC comes back , Does data guard automatically changes the role of RAC to primary ?
Goal 2:
As I explained above, all Oracle IDM products and applications speak to RAC database they only know about RAC database which is primary.They are not aware of standby database.
- Whenever a client session is in progress with RAC primary database, if RAC goes down completely , we would like to expect client session should get transferred standby datbase without loosing session information . However before this happens, standby database should become primary becuase client session may perform write operations.
- Whenever a client is trying to connect to RAC prmary and assume RAC is completely down, we would like to expect client connections should get transferred to standby database.
However before this happens, standby database should become primary becuase client session may perform write operations.
As per my knowledge, above scenarios are called 'client failver'. Please let me know if I am wrong.
Questions:
1. Please throw some light to achieve above features.
2. As per my understanding, before client failover happens, fast failover should have already occured and standby should get switch to primary role. I guess all this happens through TIMEOUT parameters. What are those.
Could you please help ?
Thanks

859875 wrote:
Goal 1:
Whenever RAC primary goes down completely, standby database should become primary database AUTOMATICALLY and it should allow read/write operation.
I guess this is called 'Fast Failover'. Please let me know if I am wrong.You are correct.
>
Questions :
- To make this happen, Do I need to configure Data Guard Broker so that standy database becomes primary when RAC goes down completely with planned or unplanned outage.Yes (you can also use Grid Control that will use Data Guard Broker).
>
Goal 2:
As I explained above, all Oracle IDM products and applications speak to RAC database they only know about RAC database which is primary.They are not aware of standby database.
- Whenever a client session is in progress with RAC primary database, if RAC goes down completely , we would like to expect client session should get transferred standby datbase without loosing session information:This is not possible: it is possible only for SELECT statement and only in a single RAC database.
You can find some interesting documents on MAA home page (best pratices, case studies...):
http://www.oracle.com/technetwork/database/features/availability/maa-090890.html

Question regarding the "mcxquery" and "dscl -mcxread" commands:

Question regarding the mcxquery and dscl -mcxread commands:
Does anyone know why the mcxquery and the dscl . -mcxread commands don't show any info about MCX managed login items & printers? The System Profiler's "Managed Client" section does. Id like to see info regarding managed printers and managed login items using the mcx tools. I have Mac users running 10.5.2 with both login items and printers that are pushed out to them via MCX. The System Profiler app shows all of their policies, but the dscl . -mcxread and mcxquery tools dont. Why not?
-D
Message was edited by: Daniel Stranathan
null

How do you "call procedures/functions" without sql code? You need at least the call statement like
{call myProc(?,?,?)}that you wrap into a CallableStatement.
Other than that: when you switch off autocommit, you need to call commit/rollback at the end. Usually, if you don't commit/rollback a non-autocommitted connection, the transaction get's committed/rollbacked when you close the connection - that depends on the JDBC driver. But it's never a good idea to ommit the commit/rollback calls on a non-autocommit connection. Usually you enclose your code in a try/catch block like this:
con.setAutocommit(false);
try {
   con.commit();
} catch (Exception e) {
   con.rollback();
} finally {
    con.setAutocommit(true); //or:
    con.close();
}

Question regarding Polling data from database using DB Adapters in BPEL

Hi,
I have the following question regarding Polling data from database using DB Adapters in BPEL -
If I am selecting data from multiple tables/view to ultimately generate hierarchical xml document, is there a way that I specify polling all of these tables/views. Is polling limited only to one table/view?
Thanks
Ravi

Hi Ravi,
your question seems to have been answered for the question of polling a set of tables with one as the root, and getting back a hierarchical xml representing multiple related tables.
However you can also poll for changes to both the root table and its related tables. Not sure if this was your question or the one already answered. If the former please check out the sample
bpel/samples/tutorials/122.DBAdapter/advanced/polling/PollingForChildUpdates
Thanks
Steve

Question about clear page and reset pagination

Hi,
I have a question about clear pages and the reset pagination in an URL. What is the reason why a clear page doesn't also trigger a reset pagination on the pages which are cleared?
I can't really imagine a business case where it makes sense to clear all data of page items on a page and don't reset the pagination of reports on that page which probably use a page item in there where clause...
The drawback of this behavior is that a developer always has to set the reset pagination checkbox when he clears the target page and the even bigger drawback is that if you specify other pages to clear, you can't reset pagination for them, because reset pagination only works for the target page.
Thanks for your input.
Patrick
*** New *** Oracle APEX Essentials *** http://essentials.oracleapex.info/
My Blog, APEX Builder Plugin, ApexLib Framework: http://www.oracleapex.info/

Enhancement request filed, thanks,
Scott

The question about portlet customization and synchronization

I have a question about portlet customization and synchronization.
When I call
NameValuePersonalizationObject data = (NameValuePersonalizationObject) PortletRendererUtil.getEditData(portletRenderRequest);
portletRenderRequest.setPortletTitle(str);
portletRenderRequest.putString(aKey, aValue);
PortletRendererUtil.submitEditData(portletRenderRequest, data);
Should I make any synchronization myself (use "synchronized" blocks or something else) or this procedure is made thread-safe on the level of the Portal API?

HI Dimitry,
I dont think you have to synchronize the block. i guess the code is synchronized internally.
regards,
Harsha

Few questions regarding Oracle Scorecard and strategy management.

Hi,
I have following questions regarding Oracle Scorecard and strategy management:
1. What are the ways in which i can show status of a KPI, like we have colors and symbols, what are others?
2. can we keep log of KPIs, store them, keep report of feedback/action taken on that?
3. Does Scorecard and strategy management have ability to retain history on feedback and log of
entries i.e. date/time, user name?
4. Does Scorecard and strategy management have ability to use common mathematical formulas e.g. median, average, percentiles. Describe.?
Thanks in advance for your help.

bump.

Question on BW data and R/3 transaction data mapping

Similar Messages

Maybe you are looking for