Question on configuring remote cfc call

I am curious if i can connect to remote cfc, hosted on the server other then localhost through FB4? For example i have some cfc which are displaying some data from a remote DB. I'd like to have my Flash Builder project to be connected to the ColdFusion server on my shared hosting and display an actual data from there,or at least to be able to connect to a cfc on the same server through Data Panel. Is this doable? How i can configure my project to access remote CF server.
Thanks in advance.

Yes , you can. I'm not sure how to use the Flashbuilder4 data-services thing to connect to the remote services. But you have to make sure your remote cfc enviroment has a crossdomain.xml file. I always forget to have one of those and I spend more time than necessary bug-hunting.
Sincerely ,
Ubu

Similar Messages

Some question about about remote method call!

I am planning to write a program like this:
in my local computer,I want to type some commands to let my remote computer to execute some programs and send back the results back to me.
Is it some thing about the java.rmi??
If I want to get started,how should I do.
I shall show my warmly thanks to whom can give me some simple code examples.
Thanks in advance!

Sorry, I don't have any code examples available, but a good place to start is the RMI-tutorial:
http://developer.java.sun.com/developer/onlineTraining/rmi/

The Remote Procedure call failed error in Microsoft Direct Access configuration

Hi,
I have setup the Microsoft Base lab using Microsoft TLG, I have generated the IPHTTPS and NLS server certificate using the Microsoft PKI. After that I have installed the Microsoft Direct Access role but at the time of configuring the Remote Access Server
it fails with the remote procedure call failed error.
Could anybody help me to resolve this issue. I have searched a lot but no any solution found. It will be very helpful, if some one can point me where I did mistake.
Thanks,
Arif

sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.
So when you tried starting SQL server service it gave the error right ? or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear. As far as I read your question it has something
to do with permission. Close SSCM window and this time right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Sql server configuration manager remote procedure call failed(0x800706be)

Hi,
My Sql Server Management Studio working well. But When I open Sql server configuration manager I Got an error
“Remote procedure call failed (0x800706be)”
I tried Goggling the problem and solve it but I am not getting any valuable
solution. Is anyone solve this problem
I attach snap here
MySql Server Details:
Microsoft SQL Server 2008 R2 (RTM) - 10.50.1617.0 (X64) Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7600: )

This error appears to happen when .mof files (Managed Object Format (MOF)) don’t get installed and registered correctly during set-up. To resolve this issue, I executed
the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
Regards,
Basit A. Farooq (MSC Computing, MCITP SQL Server 2005 & 2008, MCDBA SQL Server 2000)
http://basitaalishan.com
cau u pls tell me how to type this command on command prompt. I also have the same error in sql server 2008. I allready have sql server 2008 sp2 installed. When I was trying to type this command as it it by copying this full command to command prompt it
shows that command not found as follows
C:\>mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmpr
oviderxpsp2up.mof"
Microsoft (R) MOF Compiler Version 6.1.7600.16385
Copyright (c) Microsoft Corp. 1997-2006. All rights reserved.
File 'C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2
up.mof' not found!
please tell me step by step
thanks
nravhad

Configure remote-config for calling java class

Hi...all
i'm newbie, i got trouble for configure remote-config in flex project
how to configure remote-config.xml, if i have java class like below
package org.springframework.flex.samples.secured;
import java.util.Map;
import org.springframework.flex.security.AuthenticationResultUtils;
public class SecurityHelper {
public Map<String, Object> getAuthentication() {
return AuthenticationResultUtils.getAuthenticationResult();
please help me.....i'm newbie and wanna learnin
thanks

Hi,
May be this could be of good help to you
http://livedocs.adobe.com/blazeds/1/blazeds_devguide/
Thanks,
Balaji

Sql server services give error the remote procedure call failed [0x800706be] in sql server 2008

sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.

sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.
So when you tried starting SQL server service it gave the error right ? or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear. As far as I read your question it has something
to do with permission. Close SSCM window and this time right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Error in configuring remote desktop license

Hello --
I am going through the motions of configuring remote desktop licensing through the windows powershell. The commands that I have entered are the following:
$obj = gwmi –namespace “Root/CIMV2/TerminalServices” Win32_TerminalServiceSetting
$obj.ChangeMode(2)
The following command is what I have used on other Windows 2012 servers to have the system in question point to the license server that will be servicing it:
$obj.SetSpecifiedLicenseServerList(“PHSCTXLS03”)
However, the error message that I am encountering is as follows:
Exception calling “SetSpecifiedLicenseServerList” | “”
At Line:1 char:1
$obj,SetSpecifiedLicenseServerList(“PHSCTXLS03”)
CategoryInfo NotSpecified:
(:) [], MethodInvocationException
FullyQualifedErrorId “WMIMethodException
Can someone provide help on this?
Thanks.

Hi Kaplan71,
Any update on this issue? If there is anything else regardingthis issue, please feel free to post back.
In addition, to configure the License Sever Manually with Powershell, please also check these articles:
RD Licensing Configuration on Windows Server 2012
PowerShell and RD Session Host
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support

WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point

I am getting the following error message while trying to configure a database for a Reporting Service Server. Both SQL Server and Reporting server are 2012 named instances. I have 2014 instances as well on the same server.
Exception details...
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An error occurred when attempting to connect to the report server remote procedure call (RPC) end point. Verify that the Report Server Windows service is running, and then retry the operation.
---> System.Runtime.InteropServices.COMException (0x800706B3): The RPC server is not listening. (Exception from HRESULT: 0x800706B3)
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
   at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
   at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.GenerateDatabaseScript(String databaseName, Int32 lcid, Boolean isSharePointIntegrated, String& script)
Can someone help me on this please?

Hi Jaigi,
According to your description, you want to change a report server database for Reporting Services. But it fails on the last step and returns a error. Right?
In this scenario, it seems you are creating a report server database on another server via remote connection. Based on the error message, it has issues on executing the script for generating new database. Please check if you have permission to connect the
server and create a new database. Also please check if the Reporting Services Windows services is working properly.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Cannot change library path or name when configuring a library call function

I cannot change the library path or name when configuring a library call. I browse to the new location, click OK. The new path appears in the box. I click OK to dismiss the configuration. Then I re-open the configuration and the old path has magically appeared. I wouldn;t care but I get a fatal error whenever I execute the call. (Another VI with the same call but to a different library works fine. So I am trying to get the failing call to use the one that works.)

I am using version 7.1
It turns out that everything works fine in LV 2010 but the customer doesn't have that rev.
I am remotely debugging this using GoToMeeting. Sounds weird, but I fell into that. It works fine, I have a screen which looks exactly like the screen in the customers site. I can do everything, albeit with a little time drag. The thing is, I e-mailed the VI from his site to mine so that I could send it to you. But it works fine here. So the question is what could be different there that would cause this?
The main problem that I am trying to solve is that when I run the VI, I get a message
"Labview: An exception occurred within the external code called by the Call Library Node. This might have corrupted Labview's memory. Save any work to a new location and restart Labview"
If I set the Library Node on my machine to the correct function, it runs without error. It seems, however, to start with a different function and then I get the same error. I would think that if there is a parameter mismatch that the library would return an error status, but this appears not to be the case. (I did not write the library, HP (Agilent) did) The function is correct at the customer's machine.

Remote procedure call failed and did not execute response after changing contents

Hey Hey!
I have reviewed the other posts related to this issue but have not found a solution.
I have done myself quite a mischief and hope someone here can help me out!
I'm running an old ACER laptop with Windows 7. This PC belonged to an old colleague and therefore all of the folders and user names were still under his name, so I decided to try to change them all to my name. The main issue was the USER folder which had
the locked symbol next to it but it wasn't locked at all. I googled how to delete this folder and one bright spark suggested I create a new folder with my name, copy all of the folders from the other 'locked' user's folder into my folder, and then delete the
old user's folder.
That was fine. All seemed well. When I tried to delete the old folder the computer sat around thinking saying it was 'moving' but not doing anything. So, I cancelled the operation in the Task Manager. When I attempted to open any folder from the start menu
or desktop or task bar I was presented with a bunch of numbers and letters and the message "REMOTE PROCEDURE CALL FAILED AND DID NOT EXECUTE."
I quickly googled the message realising I'd made a major error and the first response was to type in services.msc or something to that effect, so I typed that into the Start Menu search bar and hit enter and nothing came up. So, I tried again, but now I
couldn't type anything into the search bar, I could not even select any programs from the Start Menu.
So, I can't access the Start Menu, search bar, or any of the folders unless I open uTorrent, select open containing folder, and from there I can access what I need.
I'm too afraid to reboot the PC. I can't locate my copy of Windows 7 anywhere. I'm freaking out!!
Before I pour my lowly student wage into getting a professional to fix it, could someone please offer some suggestions??
Greatly appreciated in advance.
Paris, Texas.

Hi,
Based on your description, for this question is more related to NetQueryDisplayInformation() API, in order to get better help, we may ask for suggestions in the following MSDN forum.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Besides, we can try to use a script to get all domain users. Regarding this point, the following script can be referred to as reference.
How to list all active directory users in a particular domain using PowerShell
https://gallery.technet.microsoft.com/office/How-to-list-all-active-0d9be7ce
In addition, for scripts, we can also ask for help in the following forum.
The Official Scripting Guys Forum
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Best regards
Frank Shen

Exchange 2010 SP3 Failing to Install "The remote procedure call failed"

I am getting an error while trying to upgrade the first Mailbox server in the organization to SP3. The CAS and HUB servers already upgraded without any issues. Any help is greatly appreciated.
Here is the exchange setup logs output:
[11/15/2014 09:10:52.0512] [2] Creating Server Object with DN = /dc=xxx/dc=xxx/cn=Configuration/cn=Services/cn=Microsoft Exchange/cn=xxx/cn=Administrative Groups/cn=Exchange Administrative Group (xxxx)/cn=Servers/cn=xxxxxx
[11/15/2014 09:10:52.0512] [2] Status code check (f:\14.03.0123\sources\dev\admin\src\libs\ds\x_dob.cxx:3370)
           Error code 0X8000500D (20493): This property can't be found in the cache.
[11/15/2014 09:10:52.0528] [2] Leaving ScCreateServerObject
[11/15/2014 09:10:52.0528] [2] Entering ScSetServerNetworkAddresses
[11/15/2014 09:10:52.0528] [2] Entering ScGetServerDNSNameFromDS
[11/15/2014 09:11:11.0482] [2] ScUserDNFromLoginName (f:\14.03.0123\sources\dev\admin\src\libs\exsetup\exmisc.cxx:1441)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] ScGetServerDNSNameFromDS (f:\14.03.0123\sources\dev\admin\src\libs\exsetup\dsmisc.cxx:3481)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving ScGetServerDNSNameFromDS
[11/15/2014 09:11:11.0482] [2] ScSetServerNetworkAddresses (f:\14.03.0123\sources\dev\admin\src\udog\excommon\ptudutil.cxx:1028)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving ScSetServerNetworkAddresses
[11/15/2014 09:11:11.0482] [2] CAtomServer::ScAddOrRefreshDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_server.cxx:288)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] CAtomServer::ScAddDSObjects (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\components\server\a_server.cxx:354)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] CBaseAtom::ScReinstall (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:815)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving CBaseAtom(Microsoft Exchange Server-Level Objects)::ScReinstall
[11/15/2014 09:11:11.0482] [2] Service = '' CBaseServiceAtom::ScReinstall (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\basesvcatom.cxx:242)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving CBaseServiceAtom(Microsoft Exchange Server-Level Objects)::ScReinstall
[11/15/2014 09:11:11.0482] [2] mode = 'Reinstall' (61955) CBaseAtom::ScSetup (f:\14.03.0123\sources\dev\admin\src\udog\setupbase\basecomp\baseatom.cxx:537)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] ScSetupAtom (f:\14.03.0123\sources\dev\admin\src\udog\exsetdata\exsetds.cxx:882)
           Error code 0XC00706BE (1726): The remote procedure call failed.
[11/15/2014 09:11:11.0482] [2] Leaving ScSetupAtom
[11/15/2014 09:11:11.0482] [2] [ERROR] An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] The following 1 error(s) occurred during task execution:
[11/15/2014 09:11:11.0482] [1] 0. ErrorRecord: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] 0. ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] [ERROR] The following error was generated when "$error.Clear();
   buildToBuildUpgrade-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
" was run: "An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.".
[11/15/2014 09:11:11.0482] [1] [ERROR] An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
[11/15/2014 09:11:11.0482] [1] [ERROR-REFERENCE] Id=AllADRolesCommon__ExsetdataServer Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[11/15/2014 09:11:11.0482] [1] Setup is stopping now because of one or more critical errors.
[11/15/2014 09:11:11.0482] [1] Finished executing component tasks.
[11/15/2014 09:11:11.0529] [1] Ending processing Install-MailboxRole
[11/15/2014 09:14:12.0977] [0] End of Setup
[11/15/2014 09:14:12.0977] [0] **********************************************
Additionally here is the 2 errors that are showing up in the event viewer for MSExachange Management:
Exchange Management Console-Local
2652
45
00:00:18.9698426
View Entire Forest: 'True', Configuration Domain Controller: 'domaincontroller.xxx.xxx', Preferred Global Catalog: 'domaincontroller.xxx.xxx', Preferred Domain Controllers: '{ domaincontroller.xxx.xxx }'
Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.
0
Exchange Management Console-Local
2652
9
00:00:37.7834262
View Entire Forest: 'True', Configuration Domain Controller: 'domaincontroller.xxx.xxx', Preferred Global Catalog: 'domaincontroller.xxx.xxx', Preferred Domain Controllers: '{ domaincontroller.xxx.xxx }'
Microsoft.Exchange.Management.Deployment.ScriptExecutionException: The following error was generated when "$error.Clear(); buildToBuildUpgrade-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
" was run: "An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.". ---> Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The
remote procedure call failed.'. --- End of inner exception stack trace ---
0
Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685950' and message 'The remote procedure call failed.'.

Hi,
Please try to remove the Water mark and Action keys under
HKLM\SOFTWARE\Microsoft\Exchangeserver\V14\MailboxRole
After that, reboot the server and rerun the set up.
This issue due to Exchange failed set up was trying to resume the previously failed setup rather than starting completely over.
Best Regards.

Event ID: 5014, 5004 The DFS Replication Service is stopping communication with partner / Error 1726 (The remote procedure call failed.)

I'm replicating between two servers in two sites (Server A - Server 2012 R2 STD, Server B - Server 2008 R2) over a VPN (Sonicwall Firewall). Though the initial replication seems to be
happening it is very slow (the folder in question is less than 3GB). I'm seeing these in the event viewer every few minutes:
The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
Additional Information:
Error: 1726 (The remote procedure call failed.)
and then....
The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <--I increased the TCP timeout to 24 hours):
-Increased TCP Timeout to 24 hours
-Added the following values on both sending and receiving members and rebooted server
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Value =DisableTaskOffload
Type = DWORD
Data = 1
Value =EnableTCPChimney
Type = DWORD
Data = 0
Value =EnableTCPA
Type = DWORD
Data = 0
Value =EnableRSS
Type = DWORD
Data = 0
---------------------------------more troubleshooting--------------------------
-Disabled AntiVirus on both members
-Made sure DFSR TCP ports 135 & 5722 are open
-Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
-Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
Sending Member:
[DFSRs.exe]
TCP    10.x.x.x:53            0.0.0.0:0
LISTENING       1692
[DFSRs.exe]
TCP    10.x.x.x:54669
10.x.x.x:5722          TIME_WAIT       0
TCP    10.x.x.x:54673
10.x.x.x:5722          ESTABLISHED     1656
[DFSRs.exe]
TCP    10.x.x.x:64773
10.x.x.x:389           ESTABLISHED     1692
[DFSRs.exe]
TCP    10.x.x.x:64787
10.x.x.x:389           ESTABLISHED     1656
[DFSRs.exe]
TCP    10.x.x.x:64795
10.x.x.x:389           ESTABLISHED     2104
Receiving Member:
[DFSRs.exe]
TCP    10.x.x.x:56683
10.x.x.x:389           ESTABLISHED     7472
[DFSRs.exe]
TCP    10.x.x.x:57625
10.x.x.x:54886         ESTABLISHED     2808
[DFSRs.exe]
TCP    10.x.x.x:61759
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61760
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61763
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61764
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61770
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61771
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61774
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61775
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61776
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61777
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61778
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61779
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61784
10.x.x.x:52757         ESTABLISHED     7472
[DFSRs.exe]
TCP    10.x.x.x:63661
10.x.x.x:63781         ESTABLISHED     4880
------------------------------more troubleshooting--------------------------
-Increased Staging to 32GB
-Opened the ADSIedit.msc console to verify the "Authenticated Users" is set with the default READ permission on the following object:
a. The computer object of the DFS server
b. The DFSR-LocalSettings object under the DFS server computer object
-Ran
ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
-AD replication is successful on all partners
-Nslookup is working so DNS is working
-Updated NIC drivers on both servers
- I ran the following to set the Primary Member:
dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
Then Dfsrdiag Pollad /Member:<member name>
I'm seeing these errors in the dfsr logs:
20141014 19:28:17.746 9116 SRTR   957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
Error:
+ [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
---------------------------------------more troubleshooting-----------------------------
I've done a lot of research on the Internet and most of it is pointing to the same stuff I've tried. Does anyone have any other suggestions? Maybe I need to look somewhere
else on the server side or firewall side?
I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it's not a server issue.
Some other things I'm wondering:
-Could it be the speed of the NICs? Server A is a 2012 Server that has Hyper-V installed. NIC teaming was initially setup and since Hyper-V is installed the NIC is a "vEthernet
(Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
-Could occasional ping timeout's cause the issue? From time to time I get a timeout but it's not as often as the events I'm seeing. I'm getting 53ms pings. The folder
is only 3 GB so it shouldn't take that long to replicate but it's been days. The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am. Throughout the rest of the time I have it set anywhere from
4Mbps to 64 Kbps. Server A is on a 5mb circuit and Server B is on a 10mb circuit.

I'm seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
185 events from 12:28:21 to 12:49:25
Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
Events are not limited to one replication group. I have quite a few replication groups, so I don't know for sure but I'm running under the reasonable assumption that none are spared.
Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
Side note, 1726 is referenced here:
https://support.microsoft.com/kb/976442?wa=wsignin1.0
But it says, "This RPC connection problem may be caused by an unstable WAN connection." I don't believe this is the case for my system.
It also says...
For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
Command Prompt window:
NETSTAT –ANOBP TCP
This returns all open TCP connections. The connections in question are "DFSRs.exe", which the command won't let you filter for.
Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
NETSTAT -ANOBP TCP >> X:\info.txt
Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
=IF(A3="Can not", "Can not obtain ownership information", IF(LEFT(A3,1) = "[", A3&B3&C3, ""))
Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
My server had 125 connections open.
That is a staggering number of connections to review, and I feel like I'm looking for a needle in a haystack.
I'll see if I can find anything useful out, but a better solution would be most wonderful.

Data error (invalid data type 17) in a Remote Function Call

Hi,
I am passing 2 select-option tables to RFC.
Tables have structures -
   Table1 SIGN(C1)
               OPTION(C2)
               HIGH(C6)
               LOW(C6)
   Table2 SIGN(C1)
               OPTION(C2)
               HIGH(C20)
               LOW(C20)
At the destination side, I have created two table types which have same structure.
But when I call the RFC , program terminates with error - "Data error (invalid data type 17) in a Remote Function Call"
Not able to understand the reason for this error. Please help.
Thanks,
Sujeet

Hi,
check out this example
[LINK|http://abap.googlar.eu/viewtopic.php?f=5&t=28]
You have several ranges that you can use like RANGE_AUF.
Function example:
FUNCTION zexemple.
*"*"Interface local:
*" IMPORTING
*"     REFERENCE(R_HORA) TYPE FLAG
*"     REFERENCE(R_DIA_1) TYPE FLAG
*"     REFERENCE(P_IDOC) TYPE FLAG
*" EXPORTING
*"     REFERENCE(MSG) TYPE CHAR255
*" TABLES
*"      T_OIFSPBL STRUCTURE OIFSPBL
*"      SL_PBLNR STRUCTURE RANGE_PBLNR
*"      SL_MATNR STRUCTURE RANGE_MATNR
*"      SL_HORA STRUCTURE RANGE_UZEIT
*"      T_ERROS STRUCTURE ZARSTRING
ENDFUNCTION.
Report:
SELECT-OPTIONS: sl_pblnr FOR oirbpblb-pblnr,
                              sl_matnr FOR a361-matnr.
~
Final question:
You are passing the values using TABLES and not IMPORTING right?

How to display success message after Remote service call

Hi ,
I am currently using Flex form for adding/updating user
personal details.On submit button click ,i am submitting details to
server by calling RPC remote service.For calling remote service i
am using penneframework. On penneframework, Remote service call
result are populated in RemoteResult object. It dont have any other
event method for handling result event.For errror handling, i have
defaultHandler for displaying error message.
Here i am having two requirements
1. I should be able to track RPC response, so that i can
display success message to user along with DB generated ID.
2. I need to reset all form field after receiving RPC
response.
Here my question is
1.How i can track server response, so that i can display
success or error message.
2. Is their any event or coding technique which i can use for
solving this issue.
Thanks
Kumar

you can do following way :
quote:
var token:AsyncToken =
YourRemoteClass.remoteMethod(param1,param2);
token.addResponder(new AsyncResponder(
function(data:Object, token:Object):void {
// tadaaa response
function(info:Object, token:Object):void {
//ooooo , noo, failure
token

SQL Server Agent gives- Remote procedure call failed (0x800706be)

I can't access SQL Server 2008 R2 remotely on Windows 2008
1. TCP/IP Enabled for SQL Server Network Configuration Protocols, SQL Native Client 10.0 configuration clients, and SQL Native Client 10.0 configuration clients(32 bit)
2. Firewall disabled to make sure its not interferring with things.
I noticed the SQL Server Agent is Stopped. Not sure if this is the issue. When I try and turn this from disabled to Automatic or Manual, I get this error:
Remote procedure call failed (0x800706be)
It shouldn't be this difficult.
Thank you for your help in advance!

Any luck?
The following thread is on the same topic with solutions:
http://social.technet.microsoft.com/Forums/en-US/winservermanager/thread/75933d1c-f142-459e-b7dc-d43ad4f8f93f/
Kalman Toth SQL SERVER 2012 & BI TRAINING
New Book:
Beginner Database Design & SQL Programming Using Microsoft SQL Server 2012

Question on configuring remote cfc call

Similar Messages

Maybe you are looking for