Question on DFSR after replication is setup

I have looked high and low and not found an answer.  I need to add a large amount of data to one of the replicated folders.  Is it best to just move that data over to the folder and let the replication process solve it out or do I need to
stop replication then move the data to the folder and restart the replication.  I am running a full mesh right now and all machine are in the same server room at my office.  I just need some advice on how best to get this large amount of data into
the replicated folder.
Thank you

How can we add a large amount of files to an existing DFSR folder, when we do not have time to wait for initial replication?
In our case we need to add hundreds of gigabyte, and replicate over a 2 Mb/s, 400 ms international line. I will send the data to the remote site on a hard disk, just as I did when I preseeded it before the initial replication some
time ago. (http://technet.microsoft.com/en-us/library/dn495044.aspx)
But what is the correct steps to add the same files at both servers, when DFSR is already running, and needs to be running during the transfer?
Peter :-)

Similar Messages

  • Datasource activation in BI 7.0 after replication

    Hi Gurus
    we have SAP BI 7.0 and we are extracting data from SAP ECC 5.0.
    We have few custom datasources created on R3 side which we have replicated and activated( Manually) on BI Dev side.
    Now the problem is when we transported the datasource from R3 Dev to R3 Q and replicated to BI Q , the datasource was replicated correctly ( as BI datasources ) but it is in M version. Would you please advise how can I activate that datasource?
    I heared so many ways of activating the datasources but nothing confirm , would anybody please advise me how many ways we can activate the datasource in Q and P after replication? ( for all 3X version we didnt have this problem as datasources were replicated in active mode only ).
    Thanks

    Have you transported the BI mappings also (Transformations or Transfer Rules) and even then the data sources are still in 'M' version.
    If not -
    I would suggest to transport a BI mapping from BI dev to Q.
    Make sure to collect the R/3 active data source in this BI transport.
    I assume the 'Import' & 'Method execution' steps in the transport might activate the data sources also.
    (P.S: In stead of transporting all the mappings, transport only a test mapping)
    Let us know if this works.
    Assign points if it helps.
    Thanks
    Vishno

  • Can I reconfigure iPads using Apple Configurator after previously being setup with iTunes?

    Can I reconfigure iPads using Apple Configurator after previously being setup within iTunes?
    Will VPP Codes be able to be reused? Can I restore to a backup made in iTunes?

    Can I reconfigure iPads using Apple Configurator after previously being setup within iTunes?  Yes.
    Will VPP Codes be able to be reused?  From iTunes - No.
    Can I restore to a backup made in iTunes?  You can back up an iPad that was set up in iTunes in Configurator and use that as back up in Configurator.

  • How to change datasource type 3.x or new after replication?

    Hello,
    after the replication of a datasource i got a popup, if i want an old 3.X datasource or a new datasource. I clicked new, but i need an old 3.x datasource. Now i don't have a chance the change this.Where can i do it?
    I deleted the datasource in sourcesystem, but after new replication i don't get the popup to choose the datasource type.
    The problem is, i can't change the technical name of the datasource in sourcesystem because of the naming convention.
    Thanks in advance.
    Regards.

    Hi Bill,
    it's a generic datasource i created.The problem is that i create a 3.x Infosource too and i want use my generic datasource. But after replication i choose the false type (new datasource and not 3.x datasource) and now i can't assign my datasource to my 3.x infosource.I see the datasource in the sourcesystem-tree but not in the infosource-datasource-assigning-Popup.
    How can i change the type of datasource from new datasource to 3.x datasource in BI 7.0???

  • Not opening a browser after completion of setup (ask toolbar) in windows 7.

    Hi friends,
           I just right know i facing a problem for installation ask toolbar in windows 7 PC on command line. I need to silently installation without interface displaying and after completion of installation then can't be open automatically
    browser with asks web site.
    How can i disable a browser it not open after completion of setup (ask toolbar) in windows7 on command line.

    Hello,
    The closest Microsoft forum would be the
    Windows 7 forum on Microsoft Community.
    However, this is not a Microsoft product, so I'd ask on
    http://help.ask.com/link/portal/30015/30018/ArticleFolder/9/Ask-com-Q-A-Community
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog:http://unlockpowershell.wordpress.com
    My Book:Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • Problem in activating datasource after replication from source system

    Hi Experts,
    After replication of data sources from source system ,I get all data sources inactive. I tried to make it active manually but every time I get
    Syntax error in GP_ERR_RSAPTD1, row 27 (-> long text)
        Message no. RG102
    Diagnosis
        Field "/BIC/CCZVBAK2031" is unknown. It is neither in one of the
        specified tables nor defi...
    How do I go about solving this problem....Any advise please...

    Hello,
    You do not mention your source system release but can you execute the check report
    described in the SAP note 493422 , if this does not resolve the problem can you goto
    RSA1, right click on the relevant "source system" and choose the "restore" option,
    then please try and replicate and activate the datasource again.
    If you  have BW release 7.0 please check that the note 929751is applied in your system
    or that you are on a higher support package level.
    If there is still a problem please le me know your BW Release and Support package level.
    Best Regards,
    Des

  • TS1843 i am using iphone 4 ios 6.1.3, after hotmail imap setup, error showing "CANNOT GET MAIL" tHE CONNECTION TO THE SERVER FAILED. its happening since 14 aug. plz help !

    i am using iphone 4 ios 6.1.3, after hotmail imap setup, error showing "CANNOT GET MAIL" tHE CONNECTION TO THE SERVER FAILED. its happening since 14 aug. plz help !

    I have trouble with sending e-mail and syncing e-mail. Try changing to 1 day sync under settings. It's sluggish but it works for me until they resolve the issue. MS claims all is normal. If you still have a problem you should report it here: https://status.live.com/report/hotmail

  • Financial Analyzer Web access after multi-node setup

    hey guys
    any idea on the follwoing
    Financial Analyzer Web access after multi-node setup
    any hints will be helpfull
    fadi

    Thank you Fadi for this quick idea.
    I will try to apply it in our environment.
    If we couldn't do it, I think that we have other two options; first options is to reinstall OFA in the Web Server Node where there is a Metalink note states how to move OFA from server to server. The second option is changing the configuration files of OFA to reference the Web Server in the new node.
    I will update you with the results.
    Regards,
    M.Muhtadi

  • Why does installation not start after the message "setup wants to make changes"?

    Why does installation not start after the message "Setup wants to make changes.  Type your password to allow this"?

    Hi
    It wants your system's admin password. Standard procedure on Mac for non-admin users
    Thanks

  • Is the data automatically synced after you do the original setuop or do you have to do something to make it sync? How are changes synced after the original setup?

    How is the information synced after the original setup? Is it done automatically or do you have do do something? And if so, what?

    After you setup Firefox Sync, you do not have to do anything else. It will automatically sync your data in the background. <BR><BR>
    See these articles for more information:<BR>
    [[How to sync Firefox settings between computers]]<BR>
    [[What is Firefox Sync?]]

  • How do u keep you iPad Air and you iphone5  appointments link together after the first setup so u can enter the appointment on one it will go to the other one?

    How do u keep you iPad Air and you iphone5  appointments link together after the first setup so u can enter the appointment on one it will go to the other one.

    Use iCloud to keep them in sync.
    Do you have an iCloud account?

  • A very important question for every After Effects user

    a very important question for every After Effects user, from product manager Steve Forde:
    http://adobe.ly/1exI6tI

    Tom Daigon Great idea everybody! Encourage Adobe to do ONLY ONE THING with AE for 2014. Since theres not a heck of a lot of development that can be done on the present foundation, they can really stretch the rental scheme out for many years.And once you get used to the concept, every year they will do ONE THING to placate you. So now they have you swallowing no "ownership" of software and limited development. 

  • Monitor color crazy after trying to setup on iMac G3

    This one has me puzzled and some history is needed so please bear with me. My wife has an iMac G3-266, tray loading Fruit model. The screen flickers and pops from time to time and from other posts it appears to be the flyback transformer. The screen has not gone out completely but time will take its toll soon. Anyway, I have a G3-233 beige desktop unit with an Apple Multiscan 15" display and I tried to hook it up to the imac to see if I could use an external monitor on the iMac. I purchased an A-B switch box, 15 pin and two cords, hooked up my G3 beige and the iMac with that setup. On restart, both computers gave me a purplish color on the monitor, I could not switch resolutions and it was even causing a freeze. I tired to recalibrate the monitor but it did not help. So I switched back and returned all to the orginal setups and then my G3 desktpo was still giving me wierd colors. I shut it off and check my connections and restarted and all was fine again. Day two..I tried just hooking the monitor to the iMac connection and leave out the switch box and the extra cables. Same story, blurry and bad colors. Again with purple and reddish highlights. So, this time when I reconnected the monitor to my G3 desktop, it was messed up again, no matter what I tried to do. I restarted several times and no go. I looked at the cord from the monitor and two pins were missing and I thought that was it but after checking my manual, it showed those two pins were not used at all. So I reconnected the monitor and restarted and low and behold things were back to normal.
    My question in all this, why can I not connect the display to the iMac and have it work and why does it mess things up when I try to put it back like it was? I need to eventually do something with the iMac before the screen goes out completely. Any ideas? Thank you and sorry for the long explanation. (By the way, I have upgraded my system to an iMac G5 2.1ghz but still use the ole G3 for other stuff)
    iMac G3   Mac OS 8.6 or Earlier   Fruit, tray loading model
    iMac G5   Mac OS X (10.4.5)  

    From the developer note for the Rev A iMac:
    Video Display
    The built-in video display uses a 15-inch CRT (13.8-inch viewable diagonal). The CRT uses shadow-mask technology and has a dot pitch of 0.28 mm. The display is multi-scan and supports three resolutions. Table 3-2 lists the resolutions and the pixel depths supported with either the standard 2 MB of SGRAM or with expanded SGRAM.
    Table 3-2 Display resolutions and pixel depths
    Resolution Vertical rate Pixel depth (2 MB SGRAM) Pixel depth (4 or 6 MB SGRAM)
    640 by 480 117.233 Hz 32 bits 32 bits
    800 by 600 94.97 Hz 32 bits 32 bits
    1024 by 768 75.03 Hz 16 bits 32 bits
    Those are some really fast refresh rates. I am surprised you get a picture on your 15" Multi-Scan:
    Mode Resolution Vert Rate Horiz Rate DPI
    VGA 640x480 60 Hz 31.77 kHz 64
    Macintosh 640x480 66.7 Hz 35.0 kHz 64
    SVGA 800x600 60 Hz 37.9 kHz 80
    SVGA 800x600 72 Hz 48.1 kHz 80
    Macintosh 832x624 75 Hz 49.7 kHz 83
    1024 x768 1024x768 70 Hz 56.5 kHz 102

  • Questions on the very basics of setup

    I'm helping a "friend" setup his MacBook Pro (a likely story, I know). he has an AirPort Extreme and wants to connect to the internet using his DSL box. All the cables are correctly connected, I believe. Went through the procedure of using the AirPort Setup Assistant (creating network i.d., password, etc.). When we click "connect", the left AirPort light flashes periodically as it's supposed to, but we get the following message after a few moments:
    "could not find a PPPoE server"
    I presume that means that we need to install the DSL software on the machine. Is that correct? Should this be an "easy" fix or do I have to consider other things in order to get to the internet?
    I do apologize if this is a re-run question, but I didn't see it in the forum. Thanks for any guidance or reference to other links in the forum.....

    Just as a hunch, and I'm new to this support site as well, but I'd go check out the Airport Forums, and see if there is this info in there already. That being said, from what I understand and have experienced, some adsl modems work in dummy mode, where the router/airport device actually prompts the information through it, and some have their own dhcp server with all that username/password,ect, stuff in there. One thing you may have to do is connect the modem directly to your ethernet port on your computer, and go into your webbrowser and type "192.168.1.1" into the address bar and press enter, this should give you your dsl modems configuration page, from there you'll have to figure out which option you can go with. What i've seen a few times is a modem that has to have the username and password setup, and also has basic network configuration, and then a router, which has to be setup for dhcp as well, with no username and password info involved. What makes this more confusing, is sometimes both the router and the modem are set to use the same default address for themselves. Try checking out the documentation on both the airport, and whatever information you can glean from your isp about your modem. If this all sounds like nonsense to you, I'd just check into paying your isp to send someone to set it up, or some other knowledgeable networking tech. Good luck

  • Flashing Question Mark Folder after Clean Install in Target Disk Mode

    I have an old iBook G4 with a failing optical drive and the need to reformat the hard drive and re-install OS 10.5.4. Since the optical drive is failing and unpredictable, I figured I'd do everything in target disk mode.
    So I mounted the hard drive of the iBook to my Mac Pro via Firewire in target disk mode. I was able to successfully format the hard drive of the iBook, zeroing out all the data with 7 passes, and I was also able to successfully install OS 10.5.4 from my original Install DVD, again in target disk mode.
    After the install was complete, I went through all the registration process and User Account setup and the iBook booted fine albeit still in target disk mode. So I shut down the Mac Pro, turned off the iBook and unplugged the Firewire cable. My Mac Pro booted up just fine afterward. But the iBook now gives me the flashing question mark/finder folder.
    I know this means that the iBook is having trouble located a startup volume, or that the startup volume is corrupt or missing data. How can this be, though, after a reformat and clean install? Did I do something wrong in target disk mode? Or did I neglect to do something necessary?
    Thanks for anyone's help on this.

    Thanks, Niel.
    I don't see APM as an option in Disk Utility when booting from my Mac Pro. I only have Mac OS Extended (Journaled), Mac OS Extended, Mac OS Extended (Case-sensitive, Journaled), Mac OS Extended (Case-sensitive), MS-DOS (FAT) and ExFAT.
    How do I get my Mac Pro to repartition the iBook properly in target disk mode?

Maybe you are looking for

  • Base unit of measure values  not loading into the cube.

    HI Xperts, i have created a generic data source and in that i took unit as base_uom and one quantity keyfigure and in my cube i have taken 0base_uom and a quantity key figure infoobject. in transformation i mapped the  base_uom(source) to 0base_uom (

  • Excise tab not required in MIGO if  Inventorised tax code is used

    hi expert Can we define systen if  if  Inventorised tax code is used ,Excise tab not required in MIGO . regard Nabil

  • Autonumber in SQL

    Is there a way i can get an autonumber in SQL, I have a databse and i want the database to have a primary key that is an autonumber, whenever a row is added it automatically enters the key in there. I am using Access as the front end for this databas

  • Webcam Project in Flash

    I'm working on a project and I have been told that Flash is capable of doing what I want to do. My project consists of taking a webcam and using it to read panels of color on a spinning wheel. The computer will then play a specific sound based on the

  • SAP Spool Printing

    I am attempting to print my Quarterly tax reports. When SAP is asked to batch print multiple documents, it gives me one Windows Print dialog per document rather than one dialog for the entire batch. This is causing the documents to print backwards be