Question on EPL vs EVPL

Folks, from an equipment and configuration perspective from the service provider side, do you know how EPL and EVPL differ in the implementation in order to accomplish features described below?
It sounds like the main difference is that EVPL supports multiple EVCs and EPL does not...
Ethernet Private Line
Verizon Business Ethernet Private Line is a fully managed, high-bandwidth point-to-point transport service for Ethernet frames.
Provisioned over next-generation SONET infrastructure
MAN and WAN connectivity for point-to-point high-speed transport
Speeds from 10-Mbps to full-rate Gigabit for local (intraLATA) and national (interLATA) applications as available
Ideal for Remote Backup and Storage Area Neworking applications
Carrier grade, reliable, high-bandwidth data center connectivity for Business Continuity and Disaster Recovery solutions
VLAN transparency allows you to control your routings with your equipment
Single-source provider with extensive nationwide presence
CONSIDER THIS IF:
Your business requires a secure, dedicated end-to-end LAN interconnectivity solution.
Back to top
Ethernet Virtual Private Line (EVPL)
An all-fiber optic network service that connects subscriber locations at native LAN speeds, EVPL uses point-to-point Ethernet virtual connections (EVCs) to define site-to-site connections.
Can be configured to support multiple EVCs to enable hub and spoke configuration
Supports a wide variety of EVC bandwidth options so you can incrementally scale bandwidth to meet your growing network requirements
Easy desktop control over bandwidth via the Verizon Enterprise Center portal
EVCs are offered in 1Mbps increments from 1-10Mbps, 10Mbps increments from 10-100Mbps and 100Mbps increments from 100-1000Mbps
Scalability – allows you to purchase and provision only what you need then scale bandwidth as you network requirements grow
Point-to-point EVC offer predictable performance for customer applications
Ideal for voice, video, and real-time data

Hello Marlon,
I agree with you: first service is thought for emulation of a dedicated point-to-point link
The second service provides multipoint capabilities emulation by supporting multiple point-to-point links terminated on different Vlan-ids on hub side.
Hope to help
Giuseppe

Similar Messages

Some beginner's EPL questions

In the fx example,
(a) Where, or rather, how is lastPrice defined? It seems that preprocessors.xml file is the only places which uses it, but I don't seem to find out how it is defined in the project. Note it is used in
<rule id="UsdToEurRule"><![CDATA[
 insert into ForeignExchangeEvent
 select avg(lastPrice) as price, 'USD' as fromRate, 'EUR' as toRate
 from (select * from StockTick where symbol='USDEUR') retain 1 sec
 where lastPrice < 3.0 and lastPrice > 0.25
 ]]>
</rule>
(b) Where is StockTick defined? Is the src code for com.bea.wlevs.adapter.packet.impl.marketsim.TestMain available? How does one relate StockTick to the TestMain class? Can someone give me an example of how an event for, say, the fxMarketAmer look like? And can workshop be used to look at the events in the stream (not just in the user code)?
Thanks in advance.
Takyiu

I developed an aplication for CDC+FP using JCreator and j2se 1.4 in Windows, of course, as you said, respecting the classes of CDC+FP. I don't know if it's the best way to do it, but it worked fine in a Zaurus and in a iPAQ with Jeode.

Zebra serial question

While this isn't strictly a LabVIEW question I'll post it in the hopes that some of you have experience. I am trying to talk to a Zebra TLP3842 via a usb-serial adapter. I have successfully communicated with the printer through its own usb port, using the simple report vi's, but it seems very limited in what I can do that way, for instance sending a Zebra command string ends up just being printed as the string I sent, rather than sending it "raw". So, seeing some recommendations on here I got as usb-serial adapter. Unfortunately I seem to be missing something. When a send an example, copied from the programming manual, to the printer, all I get is a feed to the next label, ejecting the label without any printing. I know that the printer will print, both from the previous test with the USB connection and also from the self dump mode, but all I get through the USB-Serial path is a blank label.
The string, copied right from the ELP2 manual:
A50,150,0,4,1,1,N,"Example 4" <newline> (the character for <newline> doesn't copy)
P1 <newline>
I've used both the simple serial example from the LabVIEW examples and have sent the string directly, via the VISA test panel in MAX. I did a loop back of my serial adapter to make sure it was sending. Both ends, computer and printer, are set to the same serial settings.
LabVIEW 2009
Thanks in advance
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

First this may seem like a silly question but have you verified that the printer you have uses EPL. That model printer comes in two flavors. One uses EPL for label formatting and the other uses ZPL. If it is an EPL printer as mentioned earlier all commands MUST be terminated with a carriage return ('\r') follwed by a line feed ('\n').
Try sending "UQ\r\n" to the printer. If it is an EPL printer it should return configuration data about the printer inclduing the model number and firmware version. If this fails then try sending "~hi" to the printer. If you get a reply to this it is a ZPL based printer.
You can download both the EPL and ZPL manuals at www.zebra.com.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

2851 Router question RE:Voice.

Have implementation of 2 2851 Routers connected via 10mb EPL connection interlinking two sites via 10mb Etherenet Private Line (via int g0/1), need to know if possible to insert new HWIC T-1/ISDN PRI to supply connectivity between both ends. Traditional ROLM Phone system on T-1/PRI port to 2nd site at other end of 10mbEPL to a Media GW that will convert to access for a VoIP PBX. Concern is of course that this traffic be given priority over the 10mb EPL over any data that would be input and carried and normal data connectvity is via G0/0. Have diagram as attachment is pdf. If any one has done this would it be possible to share a config.

Hello,
Thanks for your post! Since this is not a small business product, I suggest posting your question to the Networking Professoinal Connections (NetPro) Discussion Forum for input from appropriate subject matter experts. NetPro is a peer and expert forum where you can get suggestions and information from networking professionals on a variety of solutions and technologies. The NetPro forums have many threads on the 2851 and I'm sure someone over there will be able to help you.
Let me know if you have any questions,
Cisco Moderation Team

Questions on Print Quote report

Hi,
I'm fairly new to Oracle Quoting and trying to get familiar with it. I have a few questions and would appreciate if anyone answers them
1) We have a requirement to customize the Print Quote report. I searched these forums and found that this report can be defined either as a XML Publisher report or an Oracle Reports report depending on a profile option. Can you please let me know what the name of the profile option is?
2) When I select the 'Print Quote' option from the Actions drop down in the quoting page and click Submit I get the report printed and see the following URL in my browser.
http://<host>:<port>/dev60cgi/rwcgi60?PROJ03_APPS+report=/proj3/app/appltop/aso/11.5.0/reports/US/ASOPQTEL.rdf+DESTYPE=CACHE+P_TCK_ID=23731428+P_EXECUTABLE=N+P_SHOW_CHARGES=N+P_SHOW_CATG_TOT=N+P_SHOW_PRICE_ADJ=Y+P_SESSION_ID=c-RAuP8LOvdnv30grRzKqUQs:S+P_SHOW_HDR_ATTACH=N+P_SHOW_LINE_ATTACH=N+P_SHOW_HDR_SALESUPP=N+P_SHOW_LN_SALESUPP=N+TOLERANCE=0+DESFORMAT=RTF+DESNAME=Quote.rtf
Does it mean that the profile in our case is set to call the rdf since it has reference to ASOPQTEL.rdf in the above url?
3) When you click on submit button do we have something like this in the jsp code: On click call ASOPQTEL.rdf. Is the report called using a concurrent program? I want to know how the report is getting invoked?
4) If we want to customize the jsp pages can you please let me know the steps involved in making the customizations and testing them.
Thanks and Appreciate your patience
-PC

1) We have a requirement to customize the Print Quote report. I searched these forums and found that this report can be defined either as a XML Publisher report or an Oracle Reports report depending on a profile option. Can you please let me know what the name of the profile option is?
I think I posted it in one of the threads2) When I select the 'Print Quote' option from the Actions drop down in the quoting page and click Submit I get the report printed and see the following URL in my browser.
http://<host>:<port>/dev60cgi/rwcgi60?PROJ03_APPS+report=/proj3/app/appltop/aso/11.5.0/reports/US/ASOPQTEL.rdf+DESTYPE=CACHE+P_TCK_ID=23731428+P_EXECUTABLE=N+P_SHOW_CHARGES=N+P_SHOW_CATG_TOT=N+P_SHOW_PRICE_ADJ=Y+P_SESSION_ID=c-RAuP8LOvdnv30grRzKqUQs:S+P_SHOW_HDR_ATTACH=N+P_SHOW_LINE_ATTACH=N+P_SHOW_HDR_SALESUPP=N+P_SHOW_LN_SALESUPP=N+TOLERANCE=0+DESFORMAT=RTF+DESNAME=Quote.rtf
Does it mean that the profile in our case is set to call the rdf since it has reference to ASOPQTEL.rdf in the above url?
Yes, your understanding is correct.3) When you click on submit button do we have something like this in the jsp code: On click call ASOPQTEL.rdf. Is the report called using a concurrent program? I want to know how the report is getting invoked?
No, there is no conc program getting called, you can directly call a report in a browser window, Oracle reports server will execute the report and send the HTTP response to the browser.4) If we want to customize the jsp pages can you please let me know the steps involved in making the customizations and testing them.
This is detailed in many threads.Thanks
Tapash

Satellite P300D-10v - Question about warranty

HI EVERYBODY
I have these overheating problems with my laptop Satellite P300D-10v.
I did everything I could do to fix it without any success..
I get the latest update of the bios from Toshiba. I cleaned my lap with compressed air first and then disassembled it all and cleaned it better.(it was really clean insight though...)
BUT unfortunately the problem still exists...
So i made a research on the internet and I found out that most of Toshiba owners have the same exactly problem with their laptop.
Well i guess this is a Toshiba bug for many years now.
Its a really nice lap, cool sound (the best in laptop ever) BUT......
So I wanted to make a question. As i am still under warranty, can i return this laptop and get my money back or change it with a different one????
If any body knows PLS let me know.
chears
Thanks in advance

Hi
I have already found you other threads.
Regarding the warranty question;
If there is something wrong with the hardware then the ASP in your country should be able to help you.
The warranty should cover every reparation or replacement.
But I read that you have disasembled the laptop at your own hand... hmmm if you have disasembled the notebook then your warrany is not valid anymore :(
I think this should be clear for you that you can lose the warrany if you disasemble the laptop!
By the way: you have to speak with the notebook dealer where you have purchased this notebook if you want to return the notebook
The Toshiba ASP can repair and fix the notebook but you will not get money from ASP.
Greets

Question regarding NULL and forms

Hi all, i have a survey that im working on that will be sent via email.
I'm having an issue though. if i have a multiple choice question, and the user only selects one of the choices, all the unselected choices return as NULL. is there a way i can filter out anytihng that says "NULL" so it only shows the selected options?
thanks.
here is the page that retrieves all the data. thanks
<body>
1) Is this your first visit to xxxxxxx? <%=request.getParameter("stepone") %>

 
2) How did You Learn About xxxxxxx?
<%=request.getParameter("steptwoOne") %>
 
 <%=request.getParameter("steptwoTwo") %>
 
 <%=request.getParameter("steptwoThree") %>
 
 <%=request.getParameter("steptwoFour") %>
 
 <%=request.getParameter("steptwoOther") %>

 
3) What was your main reason for visiting xxxxx?
<%=request.getParameter("stepthreeOne") %>
 
 <%=request.getParameter("stepthreeTwo") %>
 
 <%=request.getParameter("stepthreeThree") %>
 
 <%=request.getParameter("stepthreeFour") %>
 
 <%=request.getParameter("stepthreeOther") %>

4) did you find the information you were looking for on this site?
<%=request.getParameter("stepfour") %>
 
<%=request.getParameter("stepfourOther") %>

5) Do you plan on using this website in the future?
<%=request.getParameter("stepfive") %>
6) What is your gender
<%=request.getParameter("stepsix") %>
7) What is your age group
<%=request.getParameter("stepseven") %>
8) Would you like to take a moment and tell us how we can improve your experience on xxxxxxxxxx?
<%=request.getParameter("stepeightFeedback") %>

i was messing around and came up with this. it doesnt remove the null, but if it is null it adds ABC beside it. so i think i might be getting close. i just need to figure out how to replace the null.
code]
<%=request.getParameter("steptwoFour") %>
 <% if (request.getParameter("steptwoFour") == null ) {
 %>
 <% out.print("abc"); %>
 <% }
 %>

Anyone know how to remove Overdrive books from my iphone that have been transferred from my computer? They do not show up on itunes. I see a lot of answers to this question but they all are based on being able to see the books in iTunes.

How do I remove Overdrive books from the library that were downloaded onto my computer then transferred to my iphone? The problem is that they do not show up in iTunes.
I see this question asked a lot when I google, but they always give answers that assumes you can find the books in iTunes either under the books tab, or the audio books tab or in the music. They do not show up anywhere for me. They do not remove from the app like the ones I downloaded directly onto my iphone.the related archived article does not answer it either. I even asked a guy working at an apple store and he could not help either. Anybody...?
Thanks!

there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

Basic question

Hello, i have a basic question. if i have defined 2 fields in a cube or a dso:
Name Quantity
and from the external flat file i get some characters for my quantity field. would my load fail? for standard dso and for write optimized?
NOTE: quantity field is a keyfigure defined as numeric.
and the load coming in has "VIKPATEL" for Quantity field and not numbers.
thanks

Hi Vik,
Yes, the load will fail.
May be you coud first load this data into BW (into PSA) and set both fields as characters fields. Then you can create DSO, do transformation from this PSA to the DSO, and put your logic as to what do you want to do with those Quantity that is not number (e.g. convert to 0, or 'Not assgined', etc).
You can use transfer rule, or a clean up ABAP code in the start routine.
Hope this helps.

Mid 2010 15" i5 Battery Calibration Questions

Hi, I have a mid 2010 15" MacBook Pro 2.4GHz i5.
Question 1: I didn't calibrate my battery when I first got my MacBook Pro (it didn't say in the manual that I had to). I've had it for about a month and am doing a calibration today, is that okay? I hope I haven't damaged my battery? The calibration is only to help the battery meter provide an accurate reading of how much life it has remaining, right?
Question 2: After reading Apple's calibration guide, I decided to set the MacBook Pro to never go to sleep (in Energy Saver System Preference) and leave it on overnight so it would run out of power and go to sleep, then I'd leave it in that state for at least 5 hours before charging it. When I woke up, the light on the front wasn't illuminated. It usually pulsates when in Sleep. Expectedly, it wouldn't wake when pressing buttons on the keyboard. So, what's happened? Is this Safe Sleep? I didn't see any "Your Mac is on reserve battery and will shut down" dialogues or anything similar, as I was asleep! I've left it in this state while I'm at work and will charge it this afternoon. Was my described method okay for calibration or should I have done something different?
Question 3: Does it matter how quickly you drain your battery when doing a calibration? i.e is it okay to drain it quickly (by running HD video, Photo Booth with effects etc) or slowly (by leaving it idle or running light apps)?
Thanks.
Message was edited by: Fresh J

Fresh J:
A1. You're fine calibrating the battery now. You might have gotten more accurate readings during the first month if you'd done it sooner, but no harm has been done.
A2. Your machine has NOT shut down; it has done exactly what it was supposed to do. When the power became critically low, it first wrote the contents of RAM to the hard drive, then went to sleep. When the battery was completely drained some time later, the MBP went into hibernation and the slepp light stopped pulsing and turned off. In that state the machine was using no power at all, but the contents of your RAM were still saved. Once the AC adapter was connected, a press of the power button would cause those contents to be reloaded, and the machine would pick up again exactly where you left off. It is not necessary to wait for the battery to be fully charged before using the machine on AC power, but do leave the AC adapter connected for at least two hours after the battery is fully charged. Nothing that you say you've done was wrong, and nothing that you say has happened was wrong.
A3. No, it does not matter.

Jabber/WebEx Connect SSO Questions

I've got a few questions around exactly what needs to be done to get SAML working for our Connect accounts to successfully authenticate from Jabber for Windows, Mac, iPhone, and Android.
We have both a Meeting Center and Connect account under WebEx using Loose Coupled Integration. Just this past week I enabled SAML for our Meeting Center accounts which went off without a hitch with the exception of Meeting Center integration with Jabber, which is now broken with a message about SSO enabled Meeting Sites not being supported (I think this would maybe be fixed if we had Tight Coupled Integration with our two account?).
Anyway, my questions are...
For Windows, I understand all clients will need to be reinstalled with the MSI argument for the SSO_ORG_DOMAIN switch I've read about, is that correct? Are there any other switches needed for the reinstall?
How will this work with the Mac and mobile clients? There's obviously no command line options to specify for the installations here, will they just know to kick over to my IdP for authentication once they see an email address that falls under an org with SSO enabled? If so, why does the Windows client need to be completely reinstalled and not just know to find the IdP from the Cloud Connect service like Meeting Center does with the Productivity Tools?
We're just doing this for our Connect Web IM accounts, not attempting any sort of SSO with the phone accounts/UC integration yet.
Any ideas on getting the Meeting Center integration into Jabber working again?

I'd suggest posting your question over on the Jabber Pilot forum, as this forum is specific to Jabber Guest questions:
https://supportforums.cisco.com/community/4551/jabber-pilot-support
-jim

My iPad wont let me download apps bc security questions, but when I try to make them it freezes

Every time I try to download an app it tells me I need to update my security questions, but once I click to make the questions the box goes white. So I'm not sure how to fix it

The new questions show on your account on http://appleid.apple.com ? If they do then try logging out and back into your account on your phone (assuming that is where you are trying to purchase from) and see if the new questions then show on it.

ASA VPN QUESTION

Hi All
The question is pretty simple. I can successfully connect to my ASA 5505 firewall via cisco vpn client 64 bit , i can ping any ip address on the LAN behind ASA but none of the LAN computers can see or ping the IP Address which is assigned to my vpn client from the ASA VPN Pool.
The LAN behind ASA is 192.168.0.0 and the VPN Pool for the cisco vpn client is 192.168.30.0
I would appreciate some help pls
Here is the config:
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password J7NxNd4NtVydfOsB encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.0.11 EXCHANGE
name x.x.x.x WAN
name 192.168.30.0 VPN_POOL2
interface Vlan1
nameif inside
security-level 100
ip address 192.168.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address WAN 255.255.255.252
interface Ethernet0/0
switchport access vlan 2
<--- More --->
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
boot system disk0:/asa724-k8.bin
ftp mode passive
clock timezone EEST 2
clock summer-time EEDT recurring last Sun Mar 3:00 last Sun Oct 4:00
dns server-group DefaultDNS
domain-name default.domain.invalid
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list nk-acl extended permit tcp any interface outside eq smtp
access-list nk-acl extended permit tcp any interface outside eq https
access-list customerVPN_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 VPN_POOL2 255.255.255.0
access-list inside_access_in extended permit ip any any
access-list VPN_NAT extended permit ip VPN_POOL2 255.255.255.0 192.168.0.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool VPN_POOL2 192.168.30.10-192.168.30.90 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (inside) 10 interface
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
nat (outside) 10 access-list VPN_NAT outside
static (inside,outside) tcp interface smtp EXCHANGE smtp netmask 255.255.255.255
static (inside,outside) tcp interface https EXCHANGE https netmask 255.255.255.255
access-group inside_access_in in interface inside
access-group nk-acl in interface outside
route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
aaa authorization command LOCAL
http server enable
http 192.168.0.0 255.255.255.0 inside
snmp-server host inside 192.168.0.16 community public
no snmp-server location
no snmp-server contact
snmp-server community public
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs group1
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 20
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcp-client client-id interface outside
dhcpd dns 217.27.32.196
dhcpd address 192.168.0.100-192.168.0.200 inside
dhcpd dns 192.168.0.10 interface inside
dhcpd enable inside
group-policy DfltGrpPolicy attributes
banner none
wins-server none
dns-server none
dhcp-network-scope none
vpn-access-hours none
vpn-simultaneous-logins 3
vpn-idle-timeout 30
vpn-session-timeout none
vpn-filter none
vpn-tunnel-protocol IPSec l2tp-ipsec
password-storage disable
ip-comp disable
re-xauth disable
group-lock none
pfs disable
ipsec-udp disable
ipsec-udp-port 10000
split-tunnel-policy tunnelall
split-tunnel-network-list none
default-domain none
split-dns none
intercept-dhcp 255.255.255.255 disable
secure-unit-authentication disable
user-authentication disable
user-authentication-idle-timeout 30
ip-phone-bypass disable
leap-bypass disable
nem disable
backup-servers keep-client-config
msie-proxy server none
msie-proxy method no-modify
msie-proxy except-list none
msie-proxy local-bypass disable
nac disable
nac-sq-period 300
nac-reval-period 36000
nac-default-acl none
address-pools none
smartcard-removal-disconnect enable
client-firewall none
client-access-rule none
webvpn
functions url-entry
html-content-filter none
homepage none
keep-alive-ignore 4
http-comp gzip
filter none
url-list none
customization value DfltCustomization
port-forward none
port-forward-name value Application Access
sso-server none
svc none
svc keep-installer installed
svc keepalive none
svc rekey time none
svc rekey method none
svc dpd-interval client none
svc dpd-interval gateway none
svc compression deflate
group-policy customerVPN internal
group-policy customerVPN attributes
dns-server value 192.168.0.10
vpn-tunnel-protocol IPSec
password-storage enable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value customerVPN_splitTunnelAcl
default-domain value customer.local
username xxx password 8SYsAcRU4s6DpQP1 encrypted privilege 0
username xxx attributes
vpn-group-policy TUNNEL1
username xxx password C6M4Xy7t0VOLU3bS encrypted privilege 0
username xxx attributes
vpn-group-policy PAPAGROUP
username xxx password RU2zcsRqQAwCkglQ encrypted privilege 0
username xxx attributes
vpn-group-policy customerVPN
username xxx password zfP8z5lE6WK/sSjY encrypted privilege 15
tunnel-group customerVPN type ipsec-ra
tunnel-group customerVPN general-attributes
address-pool VPN_POOL2
default-group-policy customerVPN
tunnel-group customerVPN ipsec-attributes
pre-shared-key *
tunnel-group-map default-group DefaultL2LGroup
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:a4dfbb82008f78756fe4c7d029871ec1
: end
ciscoasa#

Well lots of new features have been hinted at for ASA 9.2 but I've not seen anything as far as an Engineering Commit or Customer Commit for that feature.
Site-site VPN in multiple context mode was added in 9.0(1) and I have customers have been asking for the remote access features as well.
I will remember to ask about that at Cisco Live next month.

New to Apple, questions about using Windows, and other things

Hello all,
Today is my first day as an Apple owner. It's funny because I'm also a MCSE, MCSA, and MCP.
I purchased a 24" iMac, 2.8GHz, 4GB RAM, and 1TB Hard Drive.
I want to use Windows on my Mac so that I don't have to keep switching over to my PC. My main reason for using Windows is so that I can continue to enjoy my PC Games... mostly racing and D&D games.
So my question is... how does Windows run on bootcamp? Can I still use all of my USB controllers (like my steering wheels, joysticks, etc?)
I really havent even turned on my iMac... been too amazed at just looking at it for the first day (and also rearranging my home office).
I really just want to know from those of you who have PCs AND Macs, if you still find yourself having to go back to your PC because of incompatibilities or performance issues on the iMac?

Using BootCamp, your Windows experience is no different than if running it on a similarly configured PC. If you went with a VM running under Mac OS X (like VMWare or Parallels), there are a number of differences. However, using BootCamp you have a Mac-branded PC.
I'd point out that people have been dual-booting operating systems in this fashion for decades. Windows has no obvious in-built support for doing so, but other operating systems (like Linux, FreeBSD, etc.) have always very clearly and explicitly supported dual-booting (on Macs and regular PCs) from the get go.

New Member / Video Card Choice Question

New CS4 Production Premium User Here.
I am building a computer system specifically for Video Editing and production for use with Premier CS4 & Sony Vegas.. Have been doing my usual amount of Over Research here and other places but have a series of issues I am having a little trouble coming to grips with.
I have been into computer editing game for a long time but strictly in the Audio Recording /Mixing area /..
Video is a new interest which has me hooked / Im also a Gear Junkie so I have to watch it. 
I will probably be back with a couple more topics but to keep this thread simple /
My first post question is the topic of Video cards: Adobes Hardware compatibility list seems a little out dated. ?
The system does not have to be an ultimate gaming rig as I am not into that / just SD & HD Video editing & 3d effects.. I need a card which will do what is needed / works well with Premier CS4 / Is not too loud fan wise / can run 24/5 and not overheat.
I also will need the ability to monitor on a HD TV with a good sound monitoring system / Midas / Bryston / Dynaudio etc;
I was considering either of the following / from lowest price to highest.
ASUS GeForce 9600GT Silent 650MHZ 512MB 1.8GHZ DDR3 PCI-E Dual DVI-I HDCP HDTV Out
ASUS GeForce 9800GT Matrix 612MHZ 512MB 1.8GHZ DDR3 PCI-E Dual DVI-I HDCP HDTV Out
ASUS GeForce 9800GTX+ Dk 740MHZ 512MB 2.3GHZ DDR3 PCI-E Dual DVI-I HDCP HDTV Out
Questions:
Is a 512mb card sufficient?
Will all of the above do what is needed for my purpose?
What about noise of heat issues.
My system could be running close to 24/5 at times.
Have not made a final decision on all components but will probably basically start of like this.
Vista 64 Bit/OS
Core I7 940
Asus Rampage 2 Extreme or a plain P6T
Antec 1200 Case / For now I will leave out the hard drives and other things on my list.
My builder suggests to stick with ASUS Video Cards because he has the fastest warranty replacement service on his end for ASUS products / plus I am a total ASUS Motherboard guy with years satisfied experiences.. (in Audio setups).
Any feedback or comments on the above will be appreciated.
Thanks / Orion

Thanks Members for the Feedback:
I am trying to stick just to the Video Card Issues so the topic does not get all over the map / Raid issues have already been researched & I might have a question about that later in another thread.
Witha the video card issue I am just trying to see if I can get a reply which the majority of users agree upon / not an easy task & that is were my confused state of topic started.
b Keith
It seems what you have said about QUADRO cards is the most agreed upon overall from my last three months of research at various locations / The cost is extreme for these cards & I was just trying to determime if I realy needed to go that far : >$2,000.00 and up.
just for the Graphics card..
Perhaps I should start of with one of the cards I first mentioned which are dirt cheep compared to the Quadro series and replace it when I have arrived at the point where my shills are beyond my hardware limitations.
b Charles & Jim.
Thanks for the reference to the . >ASUS GeForce 9800GTX+ Dk 740MHZ 512MB 2.3GHZ DDR3< I was thinking this might be the best to start with / except for the reported could be problems of / Noise / card size and Heat issues if running 24/5?
Other issues you have stated also seem to be agreed upon from mny sources as well / which is why I am considering perhaps not going Raid "o" from the start / perhaps Raid 5.. / or No Raid until I see If realy need it for my own personal use level.
b conclusion to this point in the game:
Looks like If I do a top notch system following all the higher end recomendations it will cost me over $10,000.00 (if I include a capture card / raid card (Areca 1220 or 1240(don't want to get into that topic just yet)& all the extras... This is about double the investment I had planned as this is basically a serious hobby not a business venture. Plus we have not included another $6,000.00 for a half decent peosumer HD camera with a few extras. I was trying to keep the entire setup to 8 to 10 grand total.. Not including the software / so this looks like wishfull thinking at best / Ho Ho.
b remember / unfortunately my pricing reflects Canadian $$ which includes a 25% hike in pricing because our government wants the loonie (Good Name) low valued so businesses can export our products at built in 25% Sale Pricing.
Perhaps,we wont get into that topic/please, but I just couldn't resist / when I start thinking about government issues (anywhere in this world) I tend to go off the deep end as part of why I am going into this video thing is to document the destruction of our environment & the entire democratic process, which is a total farce in my neck of the woods. Nuff Said..
Again Thanks for the input and I will keep watching and perhaps cover another topic later / my goal is to place an order for a build within the next 10 days of so.
B Orion

Question on EPL vs EVPL

Similar Messages

Maybe you are looking for