Question on Exploded BOM when copy the contract.
Hi ,
I have a contract xyz with BOM main component material and sub components materials.
when i create contract XYZ,sub component materials are hide, if i save the contract and open the contract those subcomponents materials will open (explode) and show in the screen.
Now I try to create a contract (type Zxx ) with a contract reference (type Zxx ) .For now I have an issue because in my new contract the system re-explode the BOM which I donu2019t want.
Please guide me how to overcome this problem.
Thanks
Kiran
Hi,
and also please check the Item category for that document type
In item category also we can maintain BOM details
Regards,
Prasannaa
Similar Messages
-
Start conditions not copied when copying the standard WF
Hi
I have to copy the standard WF WS10400002 into a custom one having same start conditions
but only with an additional step.
but the start conditions are not copied on doing so.
and when trying to create the start conditions similar to the original one
i dont find the container element Gross Amount(USD) in the copied one
How can i resolve my issue , what else do i need to take care when copying the standard WF.
Please suggest.
Thanks in advanceHi Raj
The start condition defined in the std WF is
Gross amount(USD) < 9,999.00
and the in the container varaibles that i can see while defining the start conditions there are two varaibles for gross amount
they are
->EC Confirmation goods
->Gross amount Gross Confirmation Amount in Document Currency
->Gross amount(USD) Gross Confirmation Amount in Document Currency (Currency:USD).
and the BO BUS2203 has only Gross amount in the below format
ProcConfirmationEC.GrossAmount Gross Confirmation Amount in Document Currency
The std BO doesnt have Gross amount(USD)
Copied WF
In the container variables i can see only
->EC Confirmation goods
->Gross amount Gross Confirmation Amount in Document Currency
So i dont have the variable Gross amount(USD) to use it as in the std WF.
Please suggest. -
Item number to be regenerated when copying from contract to sales order
Hi,
I am copying items from contract to sales order, say there are 10 items in contract. I copy all items leaving 5th & 7th item in contract. The numbers in sales order has to be in sequence (regenerated leaving the 5th & 7th line item) rather than it is copying the line item number as in the contract. Can any one kindly suggest me how to handle this in sales order.
Thanks
GhaneshHi,
In VTAA
QT to OR at header level
REMOVE TICKMARK OF COPY ITEM NUMBER
Then system will genrate new item numbers in targer document.
Kapil -
Error when creating the contract
When i create the contract(va41) which quotes one quotation and save ,it will alert that "Customer Base Number not maintained for Payer/Soldto # 87000889" .I do not know the wrong of creating the customer or other reason.Could anyone please tell me the reason,thanks in advance
Can you double click on the error message and let us know the message class/number.
Also, it would help if you can let us know what system you are on. -
IPhoto going black when using the contract tool
my picture goes black when im trying to edit using the contrast tool!
what the heck.. any advise?Do the other tools work correctly in the edit mode? Try the following: delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder. If that doesn't help launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard. -
Getting error when copy the SWRB Transaction.
Hi experts,
This is very urgent requirement.
There is a one transaction in CRM 5.0 that is SWRB(Web Request w/o Item) in service process. This transaction doesn't have any item details,but when I copy that transaction it is showing item details also.
I don't know how this is possible. I should get the copyed transaction also without item level details.
Please clarify if any one knows.
Actually I am using this is SWRB transaction for creating service request.
If any body knows any transaction in crm without item details please let me know.
Thanks and regards
Koti
My mail id is : [email protected]Hi Koti,
When you create new transaction type by copying the transaction type "SWRB", the new transaction type will have the following transaction categories under "Assignment of Business Transaction Categories" in Customization of Transaction Type.
1.Sales
2.Service Process
3.Business Activity
Since "Sales" is the transaction category used in any business transaction to sell any kind of items. This is the reason why you are getting item details in your newly created transaction type.
So Goto the customization of new transaction type that you have created and remove "Sales" transaction category under "Assignment of Business Transaction Categories", then try to create business transaction with that transaction type, you will not get any item details.
<b>Reward points if it helps</b>
Murali -
Error when copying the queries (urgent)
hi sdners,
when i m trying to copy my existing queries it is giving error mesg.
BEx transport requst is not available and suitable.
Request/task not available.
thanku in advance
rajaram.EDWIN,
thanks for advice,
actually i already created the request,
i forgotten to relogin.
after relogin solved the problem.
i assigned the points t u -
Error when copying the folder Manager Self-Service in the portal
Good Night.
I am implementing Employee Self-Service and Manager Self-Service
For ESS i did the following:
1. I created a new folder for my project.
2. I copied Employee Self-Service folder from the standard part into my folder.
3. I deleted the pages and worksets that not needed
4. I did the config in the backend and put the pcd in the backend config for it to be displaying the content.
And for MSS I wanted to do the same steps:
But the system display the following message of error:
Error
Source object not found. It may have been deleted.
[Error|http://www.freeimagehosting.net/uploads/0524ec1cc5.jpg]
The steps that i did are:
Portal Content==>Content Provided by SAP==>line_manager=>Right Click -->Copy.
And in the new folder --> Right Click -->Paste.
How can solve this issue?
Kind Regards
Edited by: consultor_ess_mss on Jan 29, 2010 3:11 AMHi, I solved this issue using the Content Mirroring Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/9e/9eeb41873b45489c02d989a62cb560/content.htm
In this documentation is all the steps.
Kind Regards. -
For anyone else who wants to upgrade their hard drive I offer the following solution.
The problem is that simply copying the C: drive over to the new hard drive doesn't work. The new drive hangs when booting. It turns out that Lenovo in its wisdom(?) requires that a hidden partition must be copied as well, the IBM_Service partition of 5.1G. I tried multiple ways of copying the drive that did not work
- Apricorn EZ copy didn't see my new drive at all - that may well be because I was working with a 2004 version - they haven't responded to my email questioning that.
- DriveImage XML copied the C: drive with no problem, but couldn't see the hidden partition in copying mode.
What worked?
I used my copy of Acronis True Image 11 to do the copying, making sure to keep the hidden partition the exact same size since I'd had indications in a Lenovo forum that was important.
Just boot from the CD. You'll have to use the manual mode.
The interface is a bit unnerving because you keep having to go "back" to really go to the next step in making the partitions the size you want. Other than that it works very well.
This worked flawlessly. The machine booted with no problems. I now have three times the disk space.
Jim MitchellOr check out this post for an alternate method. Dont let the title fool you.
Triuble Cloning Think Pad's original hard drive using Symantec Ghost -
Re-exploding BOM at conversion of planned order to production order
Hi, all.
I'd like to be able to specify that the planned orders I'm converting to production order re-explode the BOM on the scheduled date rather than the basic date of the production order.
I want to be able to do this in customizing rather than specifying a BOM Explosion Date (fixed key date) in the planned order or independent requirements. Is there anything in customizing that could do this?
Thanks!
SarahHi Sarah,
I think you have checked the note:
391846 Modif: Reading master data when converting planned order
Because only with the modification of this note, you will be able to re-explode the BOM when converting the planned order to production order, however, there is no way to set the BOM explosion date to the scheduled date during the conversion, there is no such customizing as the note only add three action for this function:
' ' Do not read
'1' Read with explosion date from planned order
'2' Read with newly determined explosion date
So if you need such function, you may try to develop the modification by yourself.
Regards,
Rachel -
When does the actual balance create in gl_balance table?
Hi,
I have question on gl_balance table. when does the actual balance create in gl_balance table?
We are in Oct-11 period and I can see 'E' and 'B' balance data have been created in gl_balance table for future peiord, such as 'Nov-11' .. However, there is no data for 'A' period. Is that right?
Thank you for your help!
DeeDee WuOctavio,
Thank you for your response.
Do you mean that ‘Actual’ balance for Nov. period will not be in there until Nov. period is opened and have some journals posted?
Can you help me to understand following data?
There is one code combination has been closed in 'May' and has Jun period data with last_updated_date = '28-Apr-2010'. Is that Jun data created at 28-Apr-2010 or copied from May data when Jun. period opened?
CC period LAST_UPDATE_DATE period LAST_UPDATE_DATE period LAST_UPDATE_DATE
838826 Apr-10 28-APR-10 May-10 28-APR-10 Jun-10 28-APR-10
Thank you!
DeeDee Wu -
Whre to see the contract number in sales order
Hi All,
I created conrtact thruogh T.code:va41,based on this number,i create sales order.But my question is where can i see the contract number in sales order(va01).Pls suggest.
Thanks,
GTNRHi GTNR,
This is not possible to see in VA01 while creating the sale order,because the system taking the reference document no form buffer,so it is not possible to see in VA01.While creating the order you select create with reference there it self you will tell the system through which contract you want to create the sale order.
Once you save the order in change mode VA02 you can see that through document flow or form table also you can see
as Mr.Ravi mentioned above.
Regards
Ram -
Error in component quantity while exploding BOM
Hi
We are facing error while exploding BOM
i.e. the component quantity is 11.111 YD in cs03
but while exploring in CS13 we are getting component qty as 12 YD
Note : there is no rounding value maintained in the material master
waiting for your valuable response
Regards
BarlaHi Barla
Check the field "Roundoff" in transaction OS29, and maintainted it "1"
Regards -
Request: "Draw Document Wizard" when copying from Sales Order to A/R Invoic
Hi Colleagues
Our clients complain about not being able to choose the exchange rate from the base document when copying the Sales Order to A/R Invoice.
The "Draw Documents Wizard", where you can choose this option, starts only when you're in the "A/R Invoice" form and copying data from the Sales Order. But "Draw Document Wizard" doesn't start when you're in the Sales Order and copying all its data to an A/R Invoice, and they use only this sequence.
Is it possible to add the "Draw Documents Wizard" for the "Sales Order -> A/R Invoice" chain in one of the next versions of SAP BusinessOne 2007?
Thanks!Hi,
is this happening for perticuler user or for all users.?
check any addon is running ,If yes stop addon and check again this activity.
Check general authorization too for perticuler user..
Hope it will help you.
Regards
Deepak Tyagi -
Gradient and text, changes when copied
Hi, this is a CS3 document, exported in IDML for CS4.
The price has no transparency, no other effects.
When copied, the value stays the same but the visual changes. Any ideas?
This thing happen in CS5 also but not in CS3.
Thanks
EDIT: if i change the first to -89 and then to -90, doesn't work. If i copy the third (that is now visually correct), the gradient stay normal.It looks like InDesign has repositioned the gradient within the text. Think of a gradient without the text masking it, as a rectangle that fades from yellow to green. With the Gradient tool you can click and drag to define the angle and size of that rectangle. The text then masks the rectangle so only the part within the text shows. I think InDesign did not reposition the text and the gradient properly when you pasted. You can highlight the text, then switch to the Gradient tool and drag to reposition the gradient. Unfortunately there is no way to make this part of a character style or paragraph style.
Maybe you are looking for
-
Unable to cancel Billing due to cleared accounting document for Free Goods
Hi, I have a case as described below: I. SALES ORDER CREATION Transaction VA01 à Sales order is created for the following details: 1. Material Normal (TAN) : 100 CAR 2. Free Goods (TANN) : 10 CAR II. S
-
How do I get my photos and music back into new version iTunes from my iPad?
I have the new version of iTunes (11 0 2 26) for Windows which installed over my old copy. I see none of my music etc even after it claims to have synced and backed up. How do I get my photos and music back into iTunes from my iPad? It syncs OK with
-
Portal dev server , dispatcher and server0 not start
Hello, I have made an exact copy of our production server to create a development server. I have installed it but the dev server not start. The jcontrol.exe stay yellow and the dispatcher and the server0 stay on "Starting framework". No error in the
-
INdesign and 64 Bit Operating Systems
Been having problems with my INdesign, and the tech people on the support line said it is because I have Vista 64 bit operating system. This sounds very strange to me, as INdesign is the industry standard, and 64 bit operating systems are the norm. D
-
I can not download Modern Combat on Mac OS X Lion
I just install the Mac OS X Lion (10.7), but now I can't not download Modern Combat and install it too. it says " an error has occurred" next to "INSTALL".